Photoshop CC on Windows 7 is saving the file "date" as the created date not the modified date
I have been using a much older version of PS (CS2) and just decided to update to PS CC. I have installed the trial version of PS CC and will begin the CC subscription as soon as the trial expires.
I have noticed that PS CC saves the (main) date of the files as the "created date" not the "modified date" as it pertains to Windows Explorer and the Windows OS.
Here is what is happening: I have a file that I created in 2007 that I use for a template. It is sized to specific dimensions, etc. and when I do my save as, it automatically saves into the desired file folder, so that's why I use this as a template. I setup a new photo and then drag and drop it into my template, flatten the image and save as. When doing this with PS CS2, the date for the newly saved file was assigned as the modified date (current date and time). So, when I searched for the file in Windows Explorer or when I went to open the file, the date shown for the file was the modified date. NOW, with PS CC when I perform the exact same process and do a save as, the file date shown in Windows Explorer and/or when I go to open the file is showing as the created date (3/9/2007), the date that I created and saved the template I use. This is aggravating to me because now when I want to open a file and sort by date, the date shown in Windows Explorer is not accurate. As far as I can tell, this only happens in PS CC. When I open an old file with ID CC and do a save as, it applies the current date, not the created date. And, when I was using PS CS2, whenever I did a save as the current date was applied as well.
In summary, when performing a save as, the created date is being applied as the main date instead of the modified date. The question is: Is there a way to change this so that the modified date can be applied as the main date for the file when performing a save as?
Below are two files created the exact same way on the exact same computer: the top one was saved in PS CS2 and the bottom one was saved in PS CC. Both were saved using the "Save As" command. You will notice that when the "Save As" command was used in CS2 it updated the "Created:" date, however, in the CC version the "Created:" date was not updated, only the "Modified:" date was updated. Is there a way to update the "Created:" date when performing a "Save As" in PS CC?
Similar Messages
-
when round tripping with photoshop cc, i get a saved psd file with my original raw,the problem is these are high file sizes and taking a lot of space,can i stop this?
That's not the workflow that I use. I have my Lightroom preferences set to create TIF images when going to Photoshop. I keep the original raw file and the TIF image (usually reduced to an 8-bit image) and only export JPEG's when they are needed to send to a lab or to send to someone over the Internet. JPEG files are highly compressed. I only create them when they are needed, and they are discarded as soon as they have been used for their intended purpose. I keep the raw file and the Photoshop-created TIF in my library. This requires extra disk space. But I always have the highest quality files available.
-
Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in Windows Explorer." What is wrong? I cannot unterstand what I have to do!
Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium -
How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP
First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
You can find it here:
[Ann] Identify Your InDesign File
If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
In regards of the script showing a result for InDesign files higher than CS6:
CS7 = CC v9
CS8 = CC v10 = CC-2014 or CC2014.1
Uwe -
Photoshop CS4 - When I pullled up a file, JPEG logo someone sent to me, the screen has cross thin green lines over it. What is that? How do I remove it?
JPEG files are not layered files they are just image files so the green lines are a part of that file.
Usually cross lines are added to prevent anyone from using the file without proper rights, its a way of safeguarding the artwork.
You have to ask the owner of the file to remove the lines for you.
hope this helps
thanks -
Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enclosing folders." What on earth does it mean? How can I stop this message from appearing?
See here:
I cannot save recent images. -
I recently uploaded the Maverick operating system. I wanted to scan some things on my HP Printer/Scanner and could not . This is the error message I received: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only. I am a novice with the computer and have no one to help. I hope someone knows an easy fix.
Thank youThis worked for me:
"Although it is not a 'fix' for the HP issue, I did find a workaround that helped me. In the Preferences Panel in MacOS X you can pull up the Printer/Scanner preferences and scan directly from OS X. I'd not known of this prior to posting here and it worked like a charm."
"Of course, HP should still update their software, but it's good to know that Apple has it covered for them."
I found it here:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/MAVERICKS-WONT-SCAN-HP-C3 09A/td-p/3052105 -
I have Maverick 10.9.1 installed I scanned a photo on my HP D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.
Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software -
hi, photoshop crashed and the file I was previously working in, on the same version of Photoshop says "Could not complete your request because the file is not compatible with this version of Photoshop." I'll appreciate any help. Thank you.
CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras -
I want a stamp to write to the file metadata and be able to display the result in windows explorer. I have read PDF Stamp Secrets and can write to Custom Metadata but don't know how to display that custom field in explorer. Can I have the stamp write to a standard (non-custom) metadata field? Or, how do it get the custom field to display in explorer? Windows is pretty stingy with the file details it displays for PDF files, in fact there are no editable fields provided (like are available for Office files). I want this to work for multiple users hopefully without having to get the IT group involved to make (or allow) system modifications to make this work. Any ideas? Thank you.
Metadata for Windows Explorer is tagged with different names than the metadata for PDFs. Acrobat cannot copy the metadata to the tagged items of the file header.
There are tools like EXIFTool that can manipulate the data as necessary. Phil Harvey also provides the details about the file types and their metadata tags and values so you should be able to map the tags that need to be updated. -
After downloading Maverick I cannot save or email scans from my HP L7780. I receive error message "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.
Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software -
I made un update for OSX-10.9.2. , and when a scan a document or a picture in one printer HP D-110, and order `save as` , the file saved is a black picture or document. I can't see the file. What happens? I made the downloads of files required by HP for the OS maverick in HP site.
Tks, PaulaThis link should help:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/OS-X-10-9-Mavericks-Incor rect-output-using-HP-Scan/td-p/3069079 -
The Windows SMB feature has file locking if multiple users are accessing the same file. Does File Sharing (AFP) on Snow Leopard Server provide similar services?
Were you ever able to solve this problem. I'm having similar issues since upgrading to snow leopard. Four macs connect to a Windows Server 2003 for shared files. Each user has full permissions & when we "get info" it shows read & write permissions. Two of the computers were running 10.4, two were running 10.5. Everything worked properly until upgrading to snow leopard. Some files let me copy, move, delete. Others either just hang up or we get a "no permission" error. Also getting a "pdf is in use" error, even when the file/folder doesn't contain a pdf. We had our IT rep check the server who said everything is in working order. They don't represent macs any longer but feel that it's a mac problem. I would have to agree since this problem only started after the upgrade, and the one machine that was not upgraded (still running 10.5.8) is not dealing with these problems.
Lastly, I would install 10.5 back on all of the computers if I could, but the leopard disk that came with one of the computers wouldn't work with the 2 machines running 10.4 and I didn't see it available at the apple store. I'll buy it if it's still available, but why wouldn't the disks that I have work?
Thanks for any help -
Using Lightroom 4 w/ Windows 7. Recently started shooting w/ Sony camera that shoots .arw files. Lightroom cannot read the files. Loaded Adobe converter program onto the computer and this program cannot read the files either. Any suggestions?
Thnx again for the reply. The version of Lightroom I have is 4.0 (working w/Windows 7) This computer and all media files are kept off-line After doing more research, I downloaded DNG Converter 7.1This loaded into a .zip folder, which I am planning to install into the off-line computer andrun. Where does this folder go?
And will this set up work with my version of Lightroom?
What a pain. Makes me wanna go back to shooting .nef files for all stills
Thnx -
The downloads window doesn't show files that I download them.Please, Note: I've already installed IDM 6.04 Build 2 & IE 8 is still my default browser.
neuwerld wrote:
Ohh thanks guys!
It worked as a charm, and thanks Brisbin33 for the autostart.sh tip.
So the thing that caused my whole system not to work as it should was that I forgot to put a "&" after conky?
haha that´s kinda anoying I have been sitting and looking through like a milllion files looking for the answer
But again, really thanks!
/Neuwerld
that little "&" sends the conky process to the background freeing up the current process (your autostart.sh script) to finish doing what it's doing so you can move on to running openbox itself. with this in mind, it should be obvious why keeping conky in the foreground would cause problems.
also, replacing it with (sleep 1 && conky) & means... wait a second, when that's done successfully (&&) run conky, and put all of that () to the background. that way openbox comes up immediatly and only a second later you've got your panel and monitor.
all this after .xinitrc and before openbox -
when ever i am about to add the file i double click on it and the box just dissapears does anyone else have this issue? please help me if you did!
Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.
Maybe you are looking for
-
How to paste text in Adobe Muse with same color where i copied this text?
How to paste text in Adobe Muse with same color where i copied this text?
-
Xcelsisus 2008 Filter Component
Hello all, I am new to Xcelsius and have just started exploring the features of the product. I was wondering if any of the forum members would be able to answer a question on Filter Menu Component of the product. I have the following: ColumnA ColumnB
-
New at this but was hoping there was a way to remove the scroll bars from your end product?? Any help would be appreciated. Val
-
Error installing ovi suite.
it says: An error occured during the installation of assembly 'Microsoft.VC80.MFC,processorarchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",version="8.0.50727.4053",type="win32". Please refer to Help and Support for more information.
-
Mac Mini 2010 reboot once on Mountain Lion Server
I upgrade my Macmini 2010 (Core2 Duo) on Mountain Lion and install Server. Everything works great ... but very often the macmini reboot. Bring it to AppleStore. They re-intall Snow Leopard (cool ...) make a lot of tests and say : there is no hardware