Photoshop CC: Selecting single paths without isolating

Hello
If I have two vector shapes on top of one another, when I drag over both to select a few nodes from the top one, it selects both (this is now a 'feature'). I don't want this.
I know if I want to select only the top one now that I have to isolate the shape first, but this is terribly inneficient for the way I've been editing vector shapes for years now.
Is there any way to turn off multiple layer path selection and having to isolate anything? While the new feature can be nice at times, it's mostly more of a hinderence than a help.
It was perfect in previous iterations of Photoshop.
Thanks

What a rubbish feature addition then. New features are great when they're new, but not when they remove an existing way of being productive.
They did the same thing with CS5 > CS6, but for some reason fixed it in an update, and now they've screwed it yet again.
I guess I will stick to CS6 after all

Similar Messages

Is it not possible to give the select single field without an into clause

Hi,
i have to check whether my input value( only one filed) is available in the table.
for eg i need to check whether company code is available in the table t001.
then i will give .
data lv_bukrs type t001-bukrs.
lv_bukrs = 1010.
select single bukrs from t001 where bukrs = lv_bukrs.
here its asking for me to give a vaible to store the bukrs that is
select single bukrs into dummyvalue from t001 where bukrs = lv_bukrs.
Is it not possible to give the select single fieldname without an into clause

Its Possible by declaring the tables statement
tables : AFKO.
select single * from AFKO where <condition>.
If SINGLE is specified, the resulting set has a single line. If the remaining additions to the SELECT command select more than one line from the database, the first line that is found is entered into the resulting set. The data objects specified after INTO may not be internal tables, and the APPENDING addition may not be used. The addition ORDER BY can also not be used.
An exclusive lock can be set for this line using the FOR UPDATE addition when a single line is being read with SINGLE. The SELECT command is used in this case only if all primary key fields in logical expressions linked by AND are checked to make sure they are the same in the WHERE condition. Otherwise, the resulting set is empty and sy-subrc is set to 8. If the lock causes a deadlock, an exception occurs. If the FOR UPDATE addition is used, the SELECT command circumvents SAP buffering.
Notes
When SINGLE is being specified, the lines to be read should be clearly specified in the WHERE condition, for the sake of efficiency. When the data is read from a database table, the system does this by specifying comparison values for the primary key.
If accessing tables for which SAP buffering is planned for single records, the SAP buffer is bypassed if the addition SINGLE is not specified. This behavior depends on the current implementation of the database interface and may change in future releases. In particular, it should not be used to bypass the SAP buffer. You should use the explicit addition BYPASSING BUFFER for this instead.
The addition SINLGE is not permitted in a subquery.
Regards
- Gopi

Photoshop CS3, using pen tool to make selection or path without any color

OK, here is my problem. I'm using CS3 photoshop right now. Last time I was using it regularly was in 2001, so it was version 5 or 6. At that time you could use the pen tool to make a selection or a path without ANY color. I'm trying to cut out something that needs precision (therefore the pen tool) but I need to be able to see what I'm doing. Therefore, would prefer no color option. This used to be easy, with paths, it was the default.
Can't figure it out now, HELP is no help. And, the User Guide is no longer available on Adobe.com. Looked for the one for the CS4 suite, not much much luck there either. I can call them tomorrow about that. *Right now, all I'm trying to do is put together a little pasted together thing for my niece. Two stuffed animals with antlers and santa hats on a Xmas background. Everything is done but cutting out around the stuffed animals. They need their little tufts of stuffing, so I need a tool that can create a smooth path without blocking what I'm doing with color.* Any help will me appreciated. I've tried for days to figure this out on my own, since last time I posted, I figured it out before someone responded. And, the response was quick, so I didn't want to waste anyone's time.
The pdf user guide for this is unavailable, I just ordered a book to help me with the stuff I can't figure out by myself. Thanks for everyone's quick help. –Suze

{quote:title=Suze159 wrote:}
I'm trying to cut out something that needs precision (therefore the pen tool) but I need to be able to see what I'm doing. *Right now, all I'm trying to do is put together a little pasted together thing for my niece. Two stuffed animals with antlers and santa hats on a Xmas background. Everything is done but cutting out around the stuffed animals. They need their little tufts of stuffing, so I need a tool that can create a smooth path without blocking what I'm doing with color.*{quote}
Suze,
I too use CS3 and I may be confused about your post. If so, I apologize for wasting any reader's time.
When I need a precision tool for rotoscoping a subject, I usually choose the Polygonal Lasso tool. Of all the Lasso tools, using the polygonal is the most labor intensive, but gives you the highest degree of control. With a little practice you can get quite good at it. If necessary, blow up the image to help you see what you are doing.
-- Duplicate the background layer
-- Rotoscope the subject
-- Click Refine Edge and adjust Radius, Contrast, Contract/Expand, Smooth and Feather to taste
-- Choose New>Layer via Copy or Cut
-- Hide background layer(s) and Save As or Move this layer onto your original graphic.
There may be other ways of doing it but this is what works for me. I hope that helps.
Eddie

Single Path Selection Lag Illustrator CS4

Running OSX on a MacBook Pro
Illustrator CS4 up to date
4gb Ram
No significant performance issues anywhere else.
Does this happen to anyone else?
Draw a path. Deselect the path. Use a single click to select the path with the selection tool.
For me Illustrator hangs for about 5 seconds, bring up the spinning ball before I can continue working.
If I marquee select the path, the program does not hang. I have an illustration with thousands of paths, I can marquee select the whole thing and move it immediately with no lag, but if I make a single click selection on any path, the program lags.
Do other people have this problem or is this an isolated case.
Thanks for your help.
Kyler

Thanks for the fast reply! I experienced the same phenomena. The problem turned up in Leopard 10.5.8 and dissapeared with SL (10.6.1). However, ot of the blue it started again. Any idea where to look?
Thnaks again!
Edit: After reinstalling my whole system step by step I found the culprit: a little application called 'RightZoom' which modifies the zoom button of the active window. Excluding Illustrator in the settings of RightZoom cured this problem!! Finally!

I'm working in Photoshop CS6 on a Mac and am having trouble when I select a Path it automatically feathers the selection border. I can't seem to find any place to adjust a feather setting. Does anyone have a suggestion? I'm using paths to silhouette an im

How do I change a default from feathered edge to sharp edge when I select a path?
I'm working in Photoshop CS6 on a Mac and am having trouble when I select a Path it automatically feathers the selection border. I can't seem to find any place to adjust a feather setting. Does anyone have a suggestion? I'm using paths to silhouette an image on a photograph to use in another document and I need a hard edge on it, not a feathered one.

In the Paths panel, click the flyout menu (in the top right of the panel) and choose Make Selection (this option will only be available if you have a path selected). Reduce the Feather Radius to 0 (zero) and click OK. This setting will be the default even when clicking the Load Path as Selection button.

Invisible selections and paths photoshop CS5

Hello, could you help me please ?
My new Photoshop is unusable : selections and paths are invisible until they are not closed or finished.
It seems to be a display problem - though all my softwares and drivers are updated - because when I move my image out then in the screen limits (possible with space bar during a lasso selection), selections and paths already done do appear.
Here the same problem described by somebody else :
http://forums.adobe.com/message/3015768#3015768
CS5 with last patch, X64 windows, same problem on x32 or x64 version of Photoshop
Details (in french, sorry) :
Version Adobe Photoshop : 12.0.3 (12.0.3x20101211 [20101211.r.1222 2010/12/11:02:00:00 cutoff; r branch]) x64
Système d'exploitation : Windows XP Professionnel 64 bits
Version : 5.2 Service Pack 2
Architecture système : UC Intel Famille :6, modèle :7, niveau :6 avec MMX, SSE Entier, SSE FP, SSE2, SSE3, SSE4.1
Nombre de processeurs physiques : 8
Vitesse du processeur : 2667 MHz
Mémoire intégrée : 8191 Mo
Mémoire libre : 5948 Mo
Mémoire disponible pour Photoshop : 7232 Mo
Mémoire utilisée par Photoshop : 60 %
Taille de la mosaïque d'images : 128K
Niveaux de mémoire cache de l'image : 4
Affichage : 1
Limites d'affichage : = haut : 0, gauche : 0, bas : 1024, droite : 1280
N° de la carte vidéo : 1
Carte vidéo : NVIDIA Quadro FX 5600
Version du pilote : 6.14.12.6645
Date du pilote : 20110112102836.664583-000
Pilote de la carte vidéo : nv4_disp.dll
Mode vidéo : 1280 x 1024 x 4294967296 couleurs
Nom de la carte vidéo : NVIDIA Quadro FX 5600
Mémoire vidéo : 1536 Mo
N° de la carte vidéo : 1
Carte vidéo : NVIDIA Quadro FX 5600
Version du pilote : 6.14.12.6645
Date du pilote : 20110112102836.664583-000
Pilote de la carte vidéo : nv4_disp.dll
Mode vidéo : 1280 x 1024 x 4294967296 couleurs
Nom de la carte vidéo : NVIDIA Quadro FX 5600
Mémoire vidéo : 1536 Mo

I FOUND !!!
Thanks to a tutorial :
http://www.youtube.com/watch?v=X8NE6p6M4SE
unbelievable ! I had to modify the Windows Registry... and now it works
Thanks Adobe for so efficient installation program !!

Unwanted invisible selections and paths-CS5 Photoshop

I have worked successfully to create visible selections and paths in a CS5 Photoshop document.
I however just created a document that I can not see the "dancing ants" on selections (marquee or lasso) and when I click to create points for a path they are invisible. They all however show up when I complete the selection/close the path. This makes it impossible to use selection tools or the pen tool. I cannot figure out what I did in this document to activate such an issue, and when opening a new document selections and paths ARE visible.
Any ideas? I'm a teacher starting in 3 weeks and am sure I will have a student run into this issue.
Thank you for your help.

Hi - this forum is for the CS Review product, not a general help area for CS5 products. Please head over to the Photoshop forum for help.
-Scott

Rejoin path without removing anchor handle?

Im wondering if it is possible to rejoin an open path without removing the bezier handle of the open point.
I find that I quick switch to the direct selection tool to rotate my previously placed anchor or some other quick edit, and then when I want to carry on with the path I click the last point, which has the adverse effect for me of turning the open point into a mixed curve/corner and I have to redrawn the open anchor handle. Photoshop doesn't behave like this when clicking on open anchors, you have to alt click to achieve such behaviour.
Is there something I'm missing to stop this happening?
Thanks

Dan,
Assume you're drawing a path with the pen, point-by-point, clicking to place corner points; clickDragging to place smooth points. You've just placed a smoothPoint, so both its handles are extended. Now you want to access the white pointer to make an adjustment to that most-recently placed anchor before continuing with the Pen.
Don't make a "hard switch" to the white pointer (by selecting the tool in the Toolbox or by tapping A). Instead, momentarily invoke it by pressing and holding the Ctrl key. Make the desired adjustment. Release the Ctrl key and the Pen comes back. Simply click or clickDrag where you want the next anchor; you do not have to click the last-placed anchor to resume drawing the path. Doing so, the outboard handle of the last-placed anchor will not be retracted.
If pressing Ctrl momentarily invokes the black pointer instead of the white pointer, that's because the black pointer is the one you most recently used before selecting the Pen. (That nonsense is part and parcel of AI's endlessly tedious two-selection-tool interface, to which AI still clings, despite its having been prooved both unnecessary and undesirable about three decades ago by FreeHand's far better selection interface.)
Pressing the Alt key similarly momentarily invokes the Convert tool to make adjustments, and releasing the Alt key lets you resume with the Pen (desipte AI's display of selected anchors failing to reflect that).
JET

Diff b/w select single * .... and select....up to 1 row

Hi Abapers,
What is the diff b/w Select single * from.... and select * ...up to 1 row.
Thanks in advance.
Subbu.

Select SINGLE...
SINGLE
The result of the selection should be a single entry. If it is not possible to identify a unique entry, the system uses the first line of the selection. If you use the FOR UPDATE addition, the selected entry is protected against parallel updates from other transactions until the next database commit (see LUW and database lock mechanism). If the database system identifies a deadlock, a runtime error occurs.
... UP TO n ROWS
Effect
The set of results is restricted to a maximum of nrows.
Example
To output a list of the 3 business customers with the greatest discount:
DATA WA_SCUSTOM TYPE SCUSTOM.
SELECT * FROM SCUSTOM INTO WA_SCUSTOM UP TO 3 ROWS
 WHERE CUSTTYPE = 'B'
 ORDER BY DISCOUNT DESCENDING.
WRITE: / WA_SCUSTOM-ID, WA_SCUSTOM-NAME, WA_SCUSTOM-DISCOUNT.
ENDSELECT.
Notes
If you use an UP TO n ROWS addition in an ORDER-BY clause , the lines read are sorted into the correct order. The first n lines are then displayed. The system may need to read more than n lines from the database to be able to do this.
If n = 0, all selected lines are displayed.
n < 0 results in a runtime error.
Knowing when to use SELECT SINGLE or SELECT ... UP TO 1 ROWS
A lot of people use the SELECT SINGLE statement to check for the existence of a value in a database. Other people prefer to use the 'UP TO 1 ROWS' variant of the SELECT statement.
So what's the difference between using 'SELECT SINGLE' statement as against a 'SELECT .... UP TO 1 ROWS' statement ?
If you're considering the statements
SELECT SINGLE field INTO w_field FROM table.
and
SELECT field INTO w_field FROM table UP TO 1 ROWS. ENDSELECT.
then looking at the result, not much apart from the extra ENDSELECT statement. Look at the run time and memory usage and they may be worlds apart.
Why is this ?? The answer is simple.
The 'SELECT SINGLE' statement selects the first row in the database that it finds that fulfils the 'WHERE' clause If this results in multiple records then only the first one will be returned and therefore may not be unique.
The 'SELECT .... UP TO 1 ROWS' statement is subtly different. The database selects all of the relevant records that are defined by the WHERE clause, applies any aggregate, ordering or grouping functions to them and then returns the first record of the result set.
Get the difference ??
If not, here is a good example, credit for this example goes to Richard Harper, a friend of mine on sapfans.com :
Create a Ztable called ZDifference with 2 fields in it, MANDT of type MANDT and POSNR of type POSNR. Make sure both of these are keys. Also create a table maintenance dialog for it (SE11->Utilities->Table Maintenance Generator). Fill the table with ten rows 000001-000010.
Then run the program shown below:
Report Z_Difference
 Message-id 38
 Line-Size 80
 Line-Count 0
 No Standard Page Heading.
Start-Of-Selection.
Data: w_Single type Posnr,
 t_Rows type standard table of Posnr
 initial size 0
 with header line.
Select single Posnr
 from zDifference
 into w_Single.
Select Posnr
 into table t_Rows
 from zDifference
 up to 1 rows
 order by Posnr descending.
 Write :/ 'Select single:', w_Single.
 Skip 1.
 Write :/ 'Up to 1 rows :'.
 Loop at t_Rows.
 Write t_Rows.
 EndLoop.
You should see the output:
Select single: 000001
Up to 1 rows : 000010
The first 'SELECT' statement selected the first record in the database according to any selection criterion in the 'WHERE' clause. This is what a 'SELECT SINGLE' does. The second 'SELECT' has asked the database to reverse the order of the records before returning the first row of the result.
In order to be able to do this the database has read the entire table, sort it and then return the first record. If there was no ORDER BY clause then the results would have been identical (ie both '000001') but the second select if given a big enough table to look at would be far slower.
Note that this causes a problem in the Extended Program Check if the full key is not specified in a 'SELECT SINGLE'. Replacing the 'SELECT SINGLE' by an "UP TO 1 ROWS" will give the same exact results without any warning but the program will run slower and consume more memory. This is a good example of a warning that we should ignore... considering you are sure of what you are doing !!
Message was edited by:
 Judith Jessie Selvi

To complete multiple tasks in a single window without closing individual

Hi Folks,
How much it is possible to complete multiple BPM activities in a single window?
Suppose i have a BPM process which contain 2 swimlanes and 4 steps.
First 2 and 4th step is assigned to swimlane A and step3 is assigned to Swimlane B.
Two users are involved in process and users are assigned at swimlane level.
I want User A which is assigned to Swimlane A to complete first 2 steps in a single attempt without closing windows each time.
As of now once a particular activity is over BPM prompts user to close window and then again select your task from UWL inbox and proceed. Is there any way to avoid that?
Thanks in anticipation!
Mandeep Virk

It is not a bug, but a new feature. 
Some menu entries in the main menu bar are hidden if you use the mouse and only appear if you use the keyboard to open the menu (Bug 626825).
You can see the difference if you use Alt+F to open the File menu or other menus like the Edit menu (Alt+E) and Bookmarks menu (Alt+B) and compare that to what you see if you use the mouse to open the menu after you have made the menu bar visible by tapping Alt or by pressing F10.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=626825 bug 626825] - Hide redundant menu commands unless the user invokes the menu using the keyboard (make use of the openedWithKey attribute)
''(please do not comment in bug reports; you can vote instead)''
See also:
* [[/questions/799856#answer-155765]]

Select single row in ALV grid

ABAPer's ,
Does anyone can guide me to select single row only in ALV grid , without OO.

Hello,
I did not get u.
But check the below code it may help u.
tables: mara.
TYPE-POOLS: SLIS.
data:repid like sy-repid.
data: itb type mara occurs 0 with header line,
IT_FIELDCAT TYPE STANDARD TABLE OF SLIS_FIELDCAT_ALV WITH HEADER LINE,
IT_LAYOUT TYPE SLIS_LAYOUT_ALV,
ITB1 TYPE MAKT OCCURS 0 WITH HEADER LINE.
selection-screen begin of block b.
parameters: p_matnr type matnr.
selection-screen end of block b.
select * from mara into table itb where matnr = p_matnr.
SELECT * FROM MAKT INTO TABLE ITB1 WHERE MATNR = P_MATNR.
repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
 I_CALLBACK_PROGRAM = repid
I_CALLBACK_PF_STATUS_SET = ' '
 I_CALLBACK_USER_COMMAND = 'HANDLE_USER_COMMAND'
 I_STRUCTURE_NAME = 'MARA'
 IS_LAYOUT = IT_LAYOUT
 IT_FIELDCAT = IT_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
 t_outtab = itb
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM HANDLE_USER_COMMAND USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE
SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
CLEAR IT_FIELDCAT[].
IF RS_SELFIELD-FIELDNAME = 'MATNR'.
READ TABLE ITB1 INDEX RS_SELFIELD-TABINDEX.
WRITE: / ITB1-MAKTX.
ENDIF.
ENDCASE.
ENDFORM. "HANDLE_USER_COMMAND
Regards

Adding a single table without a logical join to another table (OBIEE 10g)

Sometimes I want to just display a single table without a logical join to another table in the repository. However, everytime I move it to the Business Model and Mapping layer and perform a Global Consistency Check, it tells me that it needs a logical join and I am forced to create another table to join to it. Thus creating a dimension-fact relationship. There are times I don't need this relationship and just want to display some data. Is there anyway to get around this?
Thanks in advance!

Yes,You have to create a join.You cannot take single table to BMM layer.You can create an alias of the table.Join this alias and base table through any common column and take both tables to BMM and desired table to presentation layer.
Another way is to create a view in physcial layer.Write a select statement like
Select primary_key from Table
Where primary_key is primary key of base table.Join this view ith base table and repeat the steps defined for Alias.
Regards,
Sandeep

Error in Select Statement " Comma Without Preceding Colon"

Helo Gurus.
This is my select query :
SELECT SINGLE
       STREET
       HOUSE_NUM1
       CITY2
       TEL_NUMBER
       FAX_NUMBER
       POST_CODE1
       STR_SUPPL1
       REGION
       INTO ( L_STREET, L_HOUSENUM, L_CITY2, L_TELNUMBER , L_FAXNUMBER , L_POSTCODE1 , L_STRSUPPL1 , L_REGION )
       FROM ADRC
       WHERE ADDRNUMBER = l_addrnumber.
But i am getting error as " Comma Without Preceding Colon"
How to correct this?
Points are assured !!!

Hi Anay Kulkarni ,
find the modified code with out syntax error.....
START-OF-SELECTION.
SELECT SINGLE STREET
              HOUSE_NUM1
              CITY2
              TEL_NUMBER
              FAX_NUMBER
              POST_CODE1
              STR_SUPPL1
              REGION
           INTO (L_STREET, L_HOUSENUM, L_CITY2, L_TELNUMBER, L_FAXNUMBER, L_POSTCODE1, L_STRSUPPL1, L_REGION)
           FROM ADRC
*           INTO (L_STREET, L_HOUSENUM, L_CITY2, L_TELNUMBER, L_FAXNUMBER, L_POSTCODE1, L_STRSUPPL1, L_REGION)
WHERE ADDRNUMBER = '23453'.
Dont forgot to Reward me points .....
All the very best....
Regards,
Sreenivasa sarma K.

How can i fetch records from 3 tables in a single query without using join

Hi.
Can any body please tell me How can i fetch records from 3 tables with a single query without using joins
Thanx
prabhudutta

Hi Prabgudutta,
We can fetch the data by using the views concept.
Go throuth this info we can know the how to create view and same like database table only we can fetch the data.
Views conatin the data at runtime only.
Four different view types are supported. These differ in the
way in which the view is implemented and in the methods
permitted for accessing the view data.
Database views are implemented with an equivalent view on
the database.
Projection views are used to hide fields of a table (only
projection).
Help views can be used as selection method in search helps.
Maintenance views permit you to maintain the data
distributed
on several tables for one application object at one time.
step by step creation of Maintenance view:
With the help of the table maintenance generator, you are able to maintain the ENTRIES of the table in SM30 transaction.
It can be set in transaction SE11 - Tools - Table maintenance generator.
Table maintanance Generator is used to manually input values using transaction sm30
follow below steps
1) go to se11 check table maintanance check box under attributes tab
2) utilities-table maintanance Generator-> create function group and assign it under
function group input box. Also assign authorization group default &NC& .
3) select standard recording routine radio in table table mainitainence generator to move table
contents to quality and production by assigning it to request.
4) select maintaience type as single step.
5) maintainence screen as system generated numbers this dialog box appears when you click on create button
6) save and activate table
One step, two step in Table Maintenance Generator
Single step: Only overview screen is created i.e. the Table Maintenance Program will have only one screen where you can add, delete or edit records.
Two step: Two screens namely the overview screen and Single screen are created. The user can see the key fields in the first screen and can further go on to edit further details.
SM30 is used for table maintenance(addition or deletion of records),
For all the tables in SE11 for which Table maintenance is selected , they can be maintained in SM30
Sm30 is used to maintain the table ,i.e to delete ,insert or modify the field values and all..
It creates the maintenance screen for u for the aprticular table as the maintenance is not allowed for the table..
In the SE11 delivery and maintenance tab, keep the maintenance allowed..
Then come to the SM30 and then enter the table name and press maintain..,
Give the authorization group if necessary and give the function group and then select maintenance type as one step and give the screen numbers as system specified..
Then create,,,
Then u will able to see the maintenance view for the table in which u can able to insert and delete the table values...
We use SM30 transaction for entering values into any DB table.
First we create a table in SE11 and create the table maintenance generator for that Table using (utilities-> table maintenance generator) and create it.
Then it will create a View.
After that from SM30, enter the table name and Maintain, create new entries, change the existing entries for that table.
Hope this resolves your query.
Reward all the helpful answers.
Rgds,
P.Naganjana Reddy

Selecting the data without considering any case sensitives

Moderator message: please do not post the same question more than once
Hi,
I need to select the data without considering any case sensitives.
Eg: If i enter ***JoHn****, then system need to select all currencies or amount depending on the this name.
Please assist, many thanks.
Sameer.
Edited by: Matt on Nov 20, 2008 1:16 PM

Hi,
use cp or like in the select query
and more over any thing given in single quotes must be in upper case to my knowledge in ABAP.
any how try this
select * from dbtab where name like '%JoHn%'.
if doesnt work translate it to upper case.
hope this this would solve.
regards
Ramchander Rao.K

Photoshop CC: Selecting single paths without isolating

Similar Messages

Maybe you are looking for