Photoshop CC turns RAW into J Pegs
When i drop a RAW file into photoshop CC, its turns into a j peg and Camera RAW does not open as it should do ?
It could be that it cannot recognise RAW. Please can someone help ?
Thankyou
As SSpregel has asked: What format raw file?
Note that a raw file from a camera is completely different than a file saved with a .raw extension.
Your use of the term "j peg" (implying JPEG) seems wrong in any case. Please explain what you mean in more detail.
-Noel
Similar Messages
-
Turning Raw into JPG (using automated batch action)
I have finally decided to try and learn a bit more... this is all motivated by me not being happy with White Balance and the results I get... I want more vibrant colours and natural skin tones...
Anyways I have decided to start shooting in RAW... but dont know how I get them into JPG format ??? I know I need to use Photoshop/Batch... but not sure exactly what...
When I open a RAW image it appears in Photoshop (CS3) and allows me to really manipulate the colours... but how do I then SAVE those changes and create a action so I can automate batch the pics...
Cause we shoot large sets of images (like 100-200 per set) it's important that I can automate batch them... way too slow to do each image individually...
Any help would be greatly appreciated... do I make the changes in Photoshop then batch them in Bridge ? Please think of me as a absolute newbie who needs a step by step instruction lolOk here's a step to step of what I want to do...
I want to open the RAW image... I take it I do that in Photoshop ? I say that cause when I double click a RAW image thats where it automatically opens...
After I done that I want to play around with the image... ajust exposure/colours ect... The programe that the RAW image opens in is perfect to do that, I believe it's opened in Camara Raw 4.0...
But here is the tricky bit... what I really want to be able to do is then create a action/automated batch so that I can make the same changed (automated) to all the images from that set... not have to do them individually... and at the same time change the images into JPG's
So thats the bit I guess how and what do I use to do that ? -
Greetings from a Photoshop Newbie. I need a computer, preferably a Mac laptop, with some serious processing power. I take photos with a Pentax 645Z; files are 50MB raw. I upload from Adobe Bridge and manipulate the photo, sometimes turning them into files in excess of 250MB. I cannot resize as the large files are needed for enlargements. Have all sorts of problems trying to manipulate, add effects and saving most large files. I need some serious processing power. Can anyone suggest what Mac i should purchase? I thank you in advance for your help :-)
It sounds as if you're having some system-related problems now, unrelated to processing power as such. In particular, a buggy video driver can cause everything to slow to a crawl.
Medium format files are big, true, but not so big as to cause significant slowdowns on a normally functioning and reasonably current computer. A laptop will always be slower than a well-equipped desktop system, though. Mac vs PC plays no part in this, performance is unrelated to platform.
Bottlenecks are different in ACR and Photoshop, so that should give you a clue. ACR is computing-intensive and mostly limited by CPU speed. Photoshop, however, is mostly bandwidth-intensive and mainly limited by memory and disk throughput. It's also sensitive to GPU issues. -
Is Photoshop capable of turning RAW videos into videos? [was:RAW]
Is Photoshop capable of turning RAW videos into videos? There is such thing as RAW video. Cameras that can shoot 4K such as Canon 7D, Blackmagic, and other 4K cameras are capable of shooting videos in RAW.
How are you doing the save? Just choosing File - Save?
Photoshop remembers the last "master file" format you saved something in. If the current document is capable of being saved in that format, it will default to that format for the next save.
What happens if you do the following:
1. Open your raw file, and edit it.
2. File - Save As, and in the Save as type field choose Photoshop (*.PSD;*.PDD).
3. Complete the save operation.
I'm betting that will result in your having saved a PSD format file.
In summary, change your habit to use File - Save As to save your master document and you can't go wrong.
-Noel -
How do I create a text style in CC libraries? Every time I drag and drop text into library form Photoshop or illustrator it turns it into a graphic.
If I select the text layer and click the text style button in the library it just creates a new text style for Myriad Pro 12pt - I'm not using that anywhere in my document.
Can anyone help? Seems like a bug to me as I'm trying what the video tutorials are saying.
ThanksI realize AI is an illustration program.
Do you realize it is an object-based vector-based program? Do you know the difference between raster-based and vector-based content?
My question seems to be all over the forum but no one has been able to answer other than exporting to these file formats, which make text look awful and of no use....
And yet everyone else in the world makes proper web images every day using a plethora of programs, including these...go figure.
Am I missing something?
Yep. Pretty much.
Hello Adobe! People use transparency on website logos.
Hello, cocteau! What you're calling "transparency" is inherent to object-based vector artwork. But web browsers don't support object-based vector artwork, except via file formats like Flash and SVG, or by viewing as a PDF in a plug-in version of Reader. Raster imaging in general only supports "transparency" by either indexing a specific color (i.e.; "don't display this color", as in GIF) or including an alpha channel (i.e.; "blend all the pixels with existing pixels, based on values from this extra channel", as in PNG). It's all in the raster file format you use, cocteau; it has little-to-nothing to do specifically with Adobe software. Such things are among the most basic matters understood by someone doing web design.
When I export an eps from .ai file, and open the eps in photoshop,...I save as a gif for the web, it goes back to the original problem...creates jagged text. I"m giving up on this garbage...Thanks a lot adobe! Lower the price of this software if this is all that can be done.
Once it leaves Photoshop (or Illustrator, or whatever) as a non-proprietary raster image format, it's all about what the format can do re "transparency". You can do this stuff with most any graphics program. You should read about basic web design and the differences between raster and vector content, rather than rant.
JET -
Hello:
I will be using creative techniques to process and manipulate a large number (hundreds) of very large (80 megapixel) images captured using a medium format digital back (Phase One IQ180).
Final output will be digital fine art imagery printed using an Epson 11880 at large sizes (up to 60 inches x ?), retaining the highest possible quality and resolution. I will be using Adobe CC PhotoShop and Camera RAW as well as Capture One software. PhotoShop filters will be used extensively.
The Mac Pro needs to be optimized for the above purpose and be useful for at least five years. I plan to max out all the other options (RAM, graphics cards, storage). Performance is more important than cost.
The few discussions I have found that mention optimum core configurations seem to lean toward 6 or 8 (but likely are not taking into consideration my need for manipulating a large number of very large files), so I am looking to this foum for opinions.
Thank you,
KentSee if this helps
http://macperformanceguide.com/index_topics.html#MacPro2013 -
Can't open CR2 files in photoshop and camera raw
This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
I have:
Photoshop CS4
Camera Raw CS4
Canon 5D Mark ii
I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update ) this is the one for the Canon 5d Mk2
After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
This led me to the video.
To the point.
Download the update and save to a location where you will remember.
open Adobe photoshop and go to "edit"
Them " Preferences "
then "General "
Then " Plus-Ins"
At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
Shut down photo shop and try to open a raw.
Bridge doesnt work for some reason but im going to keep looking.
Hope this works for you as well. -
I need to make a pdf document, already made in photoshop, 'page turn' and then add it to my website as an e-brochure. I know I can do this in indesign but indesign will not open pdf files for some inexplicable reason. Any ideas how I can do it without completely starting again?
Hello waitingone,
please try this (all terms are translated from my German programs to my best knowledge):
1. Did the creator of the pdf file enable the import options?
2. See import options: choose an other visibility option for your layer.
3. Let you show the import options and click into one with a black background and try these out (often a gray is selected).
4. See trimming: try the different modes there. Often works: "Media".
5. Is the pdf file (eg from Word) correctly created?
6. Is the PDF file protected? >>> no import possible.
7. If that does not help, store the pdf file in Acrobat, repair possible errors, run the PDF Optimizer before placing in InDesign.
Good luck!
Hans-Günter -
Last wish, preset converting RAW into JPG with more contrast, saturation & sharpening
A close family member is dying and she has still many RAW files, which of course look slightly lifeless as all RAW files do. She asked me to look for a simple Lightroom preset which will convert her RAWs into Jpgs with more contrast, saturation and sharpening. She has Lightroom 3, but has no experience in making presets and neither do I. She needs the preset to make the RAW files as Jpgs available to her partner & children. No fancy effects; just simple. She cannot work on her computer anymore. Can you help me with a concrete preset or if not can you make one for her?
This forum is for plugin developers - consider posting in 'Photoshop Lightroom' forum instead (at top of page, New -> Discussion -> Photoshop Lightroom).
-
I scanned a black & white negative. Can I turn it into a positive in PS?
I scanned a black & white negative. Can I turn it into a positive in PhotoShop?
Check System Preferences>Accessibility and make sure 'invert colours' isn't ticked under 'Display'.
-
Which software is better at turning images into paintings? Adobe Photoshop CS6 or Adobe Illustrator?
Why make it a competition? They're both better! ;-)
I would suggest it depends on what you intend to express (including output production), and your comfort level with the applications. Russell Brown has a video showing ways to make more traditional media referenced painting with Photoshop CS6 here: http://av.adobe.com/russellbrown/PaintingAssistant_SM.mp4
Illustrator also have some great tools for making natural media brushstrokes. Here's demo from AI CS5: https://www.youtube.com/watch?v=TMVCjMm2xWo
regards,
steve -
Turning Negatives into Positives
How do you turn negatives into positives? I have been unable to find out how to do this so would be grateful for some help.
I’m using Adobe Photoshop Elements 9.
I pressed F1 for the Help file.
I entered “convert negative to positive” in the search box.
The drop-down to the right of that entry shows that I’m using Adobe Photoshop Elements 9.
The very first “Result” is for Adobe Photoshop Elements 8, not Adobe Photoshop Elements 9.
It doesn’t do the job correctly.
There are no “Results” for Adobe Photoshop Elements 9.
How do I convert negative to positive in Adobe Photoshop Elements 9?
Please reply to [email protected] -
LR 3.3 RAW into CS5Photoshop
How can I export a RAW file from LR3.3 into Photoshop RAW before going into Photoshop?
When I export a RAW file from LR3.3 it appears in Photoshop bypassing the RAW step.
Dennis HallinanRight-click your RAW image and click on <Edit in Photoshop CS5>.
CS5 should then open - if it is not already - and load the RAW image. It is opened as a RAW image with the original file extension (NEF in my case).
Only when you save the image in CS5, a .psd is generated, saved and will be automatically imported into LR 3.3.
WW -
My adobe illustrator is in a foreign language. how can i turn it into english?
my adobe illustrator is in a foreign language. how can i turn it into english?
First please remember this is a public forum. If you are going to respond to the thread via e-mail please remove your signature prior to responding.
To resolve your difficulties you will need to go to the Language & Text preference pane. Once there click on Edit List and remove all languages besides English. You will then likely need to remove and reinstall the trial as the language setting I believe is set during the installation process. -
HOW TO TURN $6 INTO $6,000!!!!!! READING THIS COULD CHANGE
YOUR LIFE!
I found this on a bulletin board and decided to try it. A
little while back,
I was browsing through newsgroups, just like you are now, and
came across an
article similar to this that said you could make thousands of
dollars within
weeks with only an initial investment of $6.00! So I thought,
Yeah right,
this must be a scam,but like most of us, I was curious, so I
kept reading.
Anyway, it said that you send $1.00 to each of the 6 names
and address
stated in the article. You then place your own name and
address in the
bottom of the list at #6, and post the article in at least
200 newsgroups.
(There are thousands) No catch, that was it. So after
thinking it over, and
talking to a few people first, I thought about trying it. I
figured: what
have I got to lose except 6
stamps and $6.00, right? Then I invested the measly $6.00.
Well GUESS
WHAT!!...
within 7 days, I started getting money in the mail! I was
shocked! I figured
it would end soon, but the money just kept coming in. In my
first week, I
made about $25.00. By the end of the second week I had made a
total of over
$1,000.00! In the third week I had over $10,000.00 and it's
still growing.
This is now my fourth week and I have made a total of just
over $42,000.00
and it's still coming in rapidly. It's certainly worth $6.00,
and 6 stamps,
I have spent more than that on the lottery!! Let me tell you
how this works
and most importantly, why it works....Also, make sure you
print a copy of
this article NOW, so you can get the information off of it as
you need it. I
promise you
that if you follow the directions exactly, that you will
start making more
money than you thought possible by doing something so easy!
Suggestion: Read this entire message carefully! (Print it out
or download
it.) Follow the simple directions and watch the money come
in! It's easy.
It's legal. And, your investment is only $6.00 (Plus postage)
IMPORTANT: This is not a rip-off; it is not indecent; it is
not illegal; and
it is virtually no risk - it really works!!!! If all of the
following
instructions are adhered to, you will receive extraordinary
dividends.
PLEASE NOTE: Please follow these directions EXACTLY, and
$50,000 or more can
be yours in 20 to 60 days. This program remains successful
because of the
honesty and integrity of the participants. Please continue
its success by
carefully
adhering to the instructions. You will now become part of the
Mail Order
business. In this business your product is not solid and
tangible, it's a
service. You are in the business of developing Mailing Lists.
Many large
corporations are happy to pay big bucks for quality lists.
However, the
money made from the mailing lists is secondary to the income
which is made
from people like you and me asking to be included in that
list. Here are the
4 easy steps to success:
STEP 1: Get 6 separate pieces of paper and write the
following on each piece
of paper; PLEASE PUT ME ON YOUR MAILING LIST. Now get 6 US
$1.00 bills and
place ONE inside EACH of the 6 pieces of paper so the bill
will not be seen
through the envelope (to prevent thievery). Next, place one
paper in each of
the 6 envelopes and seal them. You should now have 6 sealed
envelopes, each
with a piece of paper stating the above phrase, your name and
address, and a
$1.00 bill. What you are doing is creating a service. THIS IS
ABSOLUTELY
LEGAL! You are requesting a legitimate service and you are
paying for it!
Like most of us I was a little skeptical and a little worried
about the
legal aspects of it all. So I checked it out with the U.S.
Post Office
(1-800-725-2161) and they
confirmed that it is indeed legal! Mail the 6 envelopes to
the following
addresses:
Mailing Adresses
Stephanie Hicks
1283 Evening Canyon
Henderson NV 89014
Ross Wilson
202 Belmont Dr.
Thibodaux, LA 70301
James Small
4690 Sierra St.
Riverside, CA 92504
Thomas G.
P.O. Box 591939
Houston, TX 77259
S. Parker
159 Main Street
Dadeville, Alabama 36853
A. Wyman
9734 Landowne ct.
Orlando, FL 32817
STEP 2: Now take the #1 name off the list that you see above,
move the other
names up (6 becomes 5, 5 becomes 4, etc...) and add YOUR Name
as number 6 on
the list.
STEP 3: Change anything you need to, but try to keep this
article as close
to
original as possible. Now, post your amended article to at
least 200
newsgroups. (I think there are close to 24,000 groups) All
you need is 200,
but remember, the more you post, the more money you make!
This is perfectly
legal! If you have any doubts, refer to Title 18 Sec. 1302
& 1341 of the
Postal lottery laws. Keep a copy of these steps for yourself
and, whenever
you need money, you can use it again, and again.
PLEASE REMEMBER that this program remains successful because
of the honesty
and integrity of the participants and by their carefully
adhering to the
directions. Look at it this way. If you are of integrity, the
program will
continue and the money that so many others have received will
come your way.
NOTE: You may want to retain every name and address sent to
you, either on a
computer or hard copy and keep the notes people send you.
This VERIFIES that
you are truly providing a service. (Also, it might be a good
idea to wrap
the $1 bill in dark paper to reduce the risk of mail theft.)
So, as each
post is downloaded and the directions carefully followed, six
members will
be reimbursed for their participation as a List Developer
with one dollar
each. Your name will move up the list geometrically so that
when your name
reaches the #1 position you will be receiving thousands of
dollars in
CASH!!! What an opportunity for only $6.00 ($1.00 for each of
the first six
people listed above) Send it now, add your own name to the
list and you're
in business!
---DIRECTIONS ----- FOR HOW TO POST TO NEWSGROUPS------------
Step 1) You do
not need to re-type this entire letter to do your own
posting. Simply put
your cursor at the beginning of this letter and drag your
cursor to the
bottom of this document, and select 'copy' from the edit
menu. This will
copy the entire letter into the computer's memory.
Step 2) Open a blank 'notepad' file and place your cursor at
the top of the
blank page. From the 'edit' menu select 'paste'. This will
paste a copy of
the letter into notepad so that you can add your name to the
list.
Step 3) Save your new notepad file as a .txt file. If you
want to do your
postings in different settings, you'll always have this file
to go back to.
Step 4) Use Netscape or Internet explorer and try searching
for various
newsgroups (on-line forums, message boards, chat sites,
discussions.) Step
5) Visit these message boards and post this article as a new
message by
highlighting the text of this letter and selecting paste from
the edit menu.
Fill in the Subject, this will be the header that everyone
sees as they
scroll through the list of postings in a particular group,
click the post
message button. You're done with your first one!
Congratulations...THAT'S
IT! All you have to do is jump to different newsgroups and
post away, after
you get the hang of it, it will take about 30 seconds for
each newsgroup!
**REMEMBER, THE MORE NEWSGROUPS YOU POST IN, THE MORE MONEY
YOU WILL MAKE!!
BUT YOU HAVE TO POST A MINIMUM OF 200**
That's it! You will begin receiving money from around the
world within days!
You may eventually want to rent a P.O.Box due to the large
amount of mail
you will receive. If you wish to stay anonymous, you can
invent a name to
use, as long as the postman will deliver it.
**JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT.** Now the WHY
part: Out of
200 postings, say I receive only 5 replies (a very low
example). So then I
made $5.00 with my name at #6 on the letter. Now, each of
the 5 persons who just sent me $1.00 make the MINIMUM 200
postings, each
with my name at #5 and only 5 persons respond to each of the
original 5,
that is another $25.00 for me, now those 25 each make 200
MINIMUM posts with
my name at #4 and only 5 replies each, I will bring in an
additional
$125.00! Now, those 125 persons turn around and post the
MINIMUM 200 with my
name at #3 and only receive 5 replies each, I will make an
additional
$626.00! OK, now here is the fun part, each of those 625
persons post a
MINIMUM 200 letters with my name at #2 and they each only
receive 5 replies,
that just made me $3,125.00!!! Those
3,125 persons will all deliver this message to 200 newsgroups
with my name
at #1 and if still 5 persons per 200 newsgroups react I will
receive
$15,625,00!With an original investment of only $6.00!
AMAZING! When your
name is no longer on the list, you just take the latest
posting in the
newsgroups, and send out another $6.00 to names on the list,
putting your
name at number 6 again. And start posting again. The thing to
remember is:
do you realize that thousands of people all over the world
are joining the
internet and reading these articles
everyday?, JUST LIKE YOU are now!! So, can you afford $6.00
and see if it
really works?? I think so... People have said, "e;what if the
plan is played
out and no one sends you the money? So what! What are the
chances of that
happening when there are tons of new honest users and new
honest people who
are joining the internet and newsgroups everyday and are
willing to give it
a try?
Estimates are at 20,000 to 50,000 new users, every day, with
thousands of
those joining the actual internet.
Remember: play FAIRLY and HONESTLY and this will really work.HOW TO TURN $6 INTO $6,000!!!!!! READING THIS COULD CHANGE
YOUR LIFE!
I found this on a bulletin board and decided to try it. A
little while back,
I was browsing through newsgroups, just like you are now, and
came across an
article similar to this that said you could make thousands of
dollars within
weeks with only an initial investment of $6.00! So I thought,
Yeah right,
this must be a scam,but like most of us, I was curious, so I
kept reading.
Anyway, it said that you send $1.00 to each of the 6 names
and address
stated in the article. You then place your own name and
address in the
bottom of the list at #6, and post the article in at least
200 newsgroups.
(There are thousands) No catch, that was it. So after
thinking it over, and
talking to a few people first, I thought about trying it. I
figured: what
have I got to lose except 6
stamps and $6.00, right? Then I invested the measly $6.00.
Well GUESS
WHAT!!...
within 7 days, I started getting money in the mail! I was
shocked! I figured
it would end soon, but the money just kept coming in. In my
first week, I
made about $25.00. By the end of the second week I had made a
total of over
$1,000.00! In the third week I had over $10,000.00 and it's
still growing.
This is now my fourth week and I have made a total of just
over $42,000.00
and it's still coming in rapidly. It's certainly worth $6.00,
and 6 stamps,
I have spent more than that on the lottery!! Let me tell you
how this works
and most importantly, why it works....Also, make sure you
print a copy of
this article NOW, so you can get the information off of it as
you need it. I
promise you
that if you follow the directions exactly, that you will
start making more
money than you thought possible by doing something so easy!
Suggestion: Read this entire message carefully! (Print it out
or download
it.) Follow the simple directions and watch the money come
in! It's easy.
It's legal. And, your investment is only $6.00 (Plus postage)
IMPORTANT: This is not a rip-off; it is not indecent; it is
not illegal; and
it is virtually no risk - it really works!!!! If all of the
following
instructions are adhered to, you will receive extraordinary
dividends.
PLEASE NOTE: Please follow these directions EXACTLY, and
$50,000 or more can
be yours in 20 to 60 days. This program remains successful
because of the
honesty and integrity of the participants. Please continue
its success by
carefully
adhering to the instructions. You will now become part of the
Mail Order
business. In this business your product is not solid and
tangible, it's a
service. You are in the business of developing Mailing Lists.
Many large
corporations are happy to pay big bucks for quality lists.
However, the
money made from the mailing lists is secondary to the income
which is made
from people like you and me asking to be included in that
list. Here are the
4 easy steps to success:
STEP 1: Get 6 separate pieces of paper and write the
following on each piece
of paper; PLEASE PUT ME ON YOUR MAILING LIST. Now get 6 US
$1.00 bills and
place ONE inside EACH of the 6 pieces of paper so the bill
will not be seen
through the envelope (to prevent thievery). Next, place one
paper in each of
the 6 envelopes and seal them. You should now have 6 sealed
envelopes, each
with a piece of paper stating the above phrase, your name and
address, and a
$1.00 bill. What you are doing is creating a service. THIS IS
ABSOLUTELY
LEGAL! You are requesting a legitimate service and you are
paying for it!
Like most of us I was a little skeptical and a little worried
about the
legal aspects of it all. So I checked it out with the U.S.
Post Office
(1-800-725-2161) and they
confirmed that it is indeed legal! Mail the 6 envelopes to
the following
addresses:
Mailing Adresses
Stephanie Hicks
1283 Evening Canyon
Henderson NV 89014
Ross Wilson
202 Belmont Dr.
Thibodaux, LA 70301
James Small
4690 Sierra St.
Riverside, CA 92504
Thomas G.
P.O. Box 591939
Houston, TX 77259
S. Parker
159 Main Street
Dadeville, Alabama 36853
A. Wyman
9734 Landowne ct.
Orlando, FL 32817
STEP 2: Now take the #1 name off the list that you see above,
move the other
names up (6 becomes 5, 5 becomes 4, etc...) and add YOUR Name
as number 6 on
the list.
STEP 3: Change anything you need to, but try to keep this
article as close
to
original as possible. Now, post your amended article to at
least 200
newsgroups. (I think there are close to 24,000 groups) All
you need is 200,
but remember, the more you post, the more money you make!
This is perfectly
legal! If you have any doubts, refer to Title 18 Sec. 1302
& 1341 of the
Postal lottery laws. Keep a copy of these steps for yourself
and, whenever
you need money, you can use it again, and again.
PLEASE REMEMBER that this program remains successful because
of the honesty
and integrity of the participants and by their carefully
adhering to the
directions. Look at it this way. If you are of integrity, the
program will
continue and the money that so many others have received will
come your way.
NOTE: You may want to retain every name and address sent to
you, either on a
computer or hard copy and keep the notes people send you.
This VERIFIES that
you are truly providing a service. (Also, it might be a good
idea to wrap
the $1 bill in dark paper to reduce the risk of mail theft.)
So, as each
post is downloaded and the directions carefully followed, six
members will
be reimbursed for their participation as a List Developer
with one dollar
each. Your name will move up the list geometrically so that
when your name
reaches the #1 position you will be receiving thousands of
dollars in
CASH!!! What an opportunity for only $6.00 ($1.00 for each of
the first six
people listed above) Send it now, add your own name to the
list and you're
in business!
---DIRECTIONS ----- FOR HOW TO POST TO NEWSGROUPS------------
Step 1) You do
not need to re-type this entire letter to do your own
posting. Simply put
your cursor at the beginning of this letter and drag your
cursor to the
bottom of this document, and select 'copy' from the edit
menu. This will
copy the entire letter into the computer's memory.
Step 2) Open a blank 'notepad' file and place your cursor at
the top of the
blank page. From the 'edit' menu select 'paste'. This will
paste a copy of
the letter into notepad so that you can add your name to the
list.
Step 3) Save your new notepad file as a .txt file. If you
want to do your
postings in different settings, you'll always have this file
to go back to.
Step 4) Use Netscape or Internet explorer and try searching
for various
newsgroups (on-line forums, message boards, chat sites,
discussions.) Step
5) Visit these message boards and post this article as a new
message by
highlighting the text of this letter and selecting paste from
the edit menu.
Fill in the Subject, this will be the header that everyone
sees as they
scroll through the list of postings in a particular group,
click the post
message button. You're done with your first one!
Congratulations...THAT'S
IT! All you have to do is jump to different newsgroups and
post away, after
you get the hang of it, it will take about 30 seconds for
each newsgroup!
**REMEMBER, THE MORE NEWSGROUPS YOU POST IN, THE MORE MONEY
YOU WILL MAKE!!
BUT YOU HAVE TO POST A MINIMUM OF 200**
That's it! You will begin receiving money from around the
world within days!
You may eventually want to rent a P.O.Box due to the large
amount of mail
you will receive. If you wish to stay anonymous, you can
invent a name to
use, as long as the postman will deliver it.
**JUST MAKE SURE ALL THE ADDRESSES ARE CORRECT.** Now the WHY
part: Out of
200 postings, say I receive only 5 replies (a very low
example). So then I
made $5.00 with my name at #6 on the letter. Now, each of
the 5 persons who just sent me $1.00 make the MINIMUM 200
postings, each
with my name at #5 and only 5 persons respond to each of the
original 5,
that is another $25.00 for me, now those 25 each make 200
MINIMUM posts with
my name at #4 and only 5 replies each, I will bring in an
additional
$125.00! Now, those 125 persons turn around and post the
MINIMUM 200 with my
name at #3 and only receive 5 replies each, I will make an
additional
$626.00! OK, now here is the fun part, each of those 625
persons post a
MINIMUM 200 letters with my name at #2 and they each only
receive 5 replies,
that just made me $3,125.00!!! Those
3,125 persons will all deliver this message to 200 newsgroups
with my name
at #1 and if still 5 persons per 200 newsgroups react I will
receive
$15,625,00!With an original investment of only $6.00!
AMAZING! When your
name is no longer on the list, you just take the latest
posting in the
newsgroups, and send out another $6.00 to names on the list,
putting your
name at number 6 again. And start posting again. The thing to
remember is:
do you realize that thousands of people all over the world
are joining the
internet and reading these articles
everyday?, JUST LIKE YOU are now!! So, can you afford $6.00
and see if it
really works?? I think so... People have said, "e;what if the
plan is played
out and no one sends you the money? So what! What are the
chances of that
happening when there are tons of new honest users and new
honest people who
are joining the internet and newsgroups everyday and are
willing to give it
a try?
Estimates are at 20,000 to 50,000 new users, every day, with
thousands of
those joining the actual internet.
Remember: play FAIRLY and HONESTLY and this will really work.
Maybe you are looking for
-
Currently migrating to a new domain and is there anyway to configure LDAP to use both during the migration?... We've been able to use one or the other via redirecting the LDAP Configuration Wizard and our test users but they only work for a short tim
-
After updating to IOS 8.2 my iphone 5 constantly searches for a network. I have tried resetting network, restoring from an earlier back up, resetting as a new phone - all of which have been unsuccessful- HELP !!
-
How to Extract Huge SAP HR Data into Excel?
Dear Experts & Gurus, Need your Valuable suggestions regarding this scenario. I need to extract entire SAP HR data, modules are OM,PA,TM,PY and PD into Excel sheets because our clients are migrating to other ERP. The data volume is very huge, as they
-
ORA-06552 and ORA-06553 when creating a trigger
Hey Everyone, I have a issue when i try and create a trigger on a view. I get this error message. ORA-06552: PL/SQL: Compilation unit analysis terminated ORA-06553: PLS-320: the declaration of the type of this expression is incomplete or malformedThi
-
Hi, I notified that when a Prod.Order is printed and if we delete some materials to add new ones, deleted materials will still be printed with the new materials. Does anybody had this issue already. Would be interested to know how to avoid this , tha