Photoshop CC2014.2, Mac OS X: Bug with eyedropper and adjustment layer?

Hi,
I am constantly running into a weird behavior that I have a hard time not to classify as a bug.
Can someone please verify this and instruct me where to place a proper bug report?
How to repeat:
- Create a new document (RGB, white background)
- Use the brush and paint a desaturated colored area
- add a levels adjustment layer to make it lighter or add contrast
- go back to the paint layer
- set the eyedropper to only sample the active layer
- Use the eyedropper to sample the color
- Paint a new area
= The sampled color gets modified by the adjustment layer
- Turn off the adjustment layer
- redo sample and paint
= The adjustment layer will still affect the eyedropper tool
- Delete the adjustment layer
- redo sample and paint
= The adjustment layer will still affect the eyedropper tool even if it's removed!
- Restart photoshop and load the document
- redo sample and paint
= Now it works normally again.
There is one other way to get it back to normal and that is to reset the adjustment layer before deleting or turning it off.
Mac OS X Mavericks
Photoshop CC 2014.2

Bump. Am I really the only one that encounter this issue? Feeling lonely...

Similar Messages

  • I have set up all my mac devices to sync with iCloud and all work except for email. When I delete on one device, the delete doesn't occur on the other devices.

    I have set up all my mac devices to sync with iCloud and all applications work except for email. Incoming messages appear on all devices but when I delete on one device, the delete doesn't occur on the other devices.

    Thank you for your interest. I use apple mail to access my two accounts -I guess they are 3rd party accounts. One is a gmail acount and the other is a bigpond account. I admit to a lack of a high level of literacy when it comes to the language around all of this. For example, I am aware that I have an iCloud email account as I managed to set it up, but don't really understand the purpose of it as the last thing I need is yet another email account to oversee.

  • Does mac book pro come with keynote and pages or doi have to purchase them seperately; can i purchase online?

    oes mac book pro come with keynote and pages or doi have to purchase them seperately; can I purchase online? My son has an assignment due tomooorow they use macs at school and we assumed he could just finish it at home and..no Keynote!

    Mac don't come with iWork installed unless you configure it while buying your Mac online.
    However, iWork can be purchased at the App Store. You can buy the apps individualy (Pages, Numbers and Keynote) too.

  • Need Tips to Customise Invoice with Logo and Adjust Rows and Values

    Need Tips to Customise Invoice with Logo and Adjust Rows and Values

    Hi rabisaha,
    Your logo is an image. Details on adding and working with images in Numbers can be found in Chapter 9 of the Numbers '09 User Guide.
    Rows are part of a Table. I'm not certain what you are referring to when you say "adjust rows," but the details regarding adding, removing and changing rows are in the "Working with Rows and Columns in Tables" section of Chapter 3, Using Tables in the Numbers '09 User Guide.
    Adjusting values is done by entering new values, or by revising the formulas that create values. This is also conered in the User Guide in Chapter 4, Working with Table Cells.
    The Numbers '09 User Guide is free, and may be downloaded via the Help menu in Numbers. If you intend to create Numbers tables (or to modify formulas), you may also want the iWork Formulas and Functions User Guide, available from th same location.
    For anyone new to Numbers (and for old hands as well), I recommend reading at least the first four chapters of the Numbers guide. The rest can be kept to use as a reference as needed.
    Regards,
    Barry

  • When I purchased my Mac I bought it with "pages" and "iPhoto" and "iMovie" installed, but when i try to update it says that I need to update from another account, but I have only had one Apple account, what can I do?

    When I purchased my Mac I bought it with Apps installed, when I go to update them, it says I need to update on a different Apple account. I have only ever had one Apple account, what can I do? The Apps are iPhoto, iMovie, Pages, and Keynote. Thanks for your help. Looking forward to suggestions.

    Please take each of the following steps until the problem is resolved.
    Step 1
    Follow the directions in this support article.
    Step 2
    Associate your Apple ID with your user account. Then sign in to the App Store with the same ID.
    Step 3
    Triple-click anywhere in the line below on this page to select it:
    /Library/Caches/com.apple.appstore/adoption.plist
    Right-click or control-click the line and select 
    Services ▹ Reveal
    from the contextual menu.* A folder may open with a file named "adoption.plist" selected. If it does, move the file to the Trash. You may be prompted for your administrator password. Log out, log back in, and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 4
    Contact Mac App Store Customer Service.

  • Compiler bug with generics and private inner classes

    There appears to be a bug in the sun java compiler. This problem was reported against eclipse and the developers their concluded that it must be a problem with javac.
    Idea also seems to compile the example below. I couldn't find a bug report in the sun bug database. Can somebody tell me if this is a bug in javac and if there is a bug report for it.
    https://bugs.eclipse.org/bugs/show_bug.cgi?id=185422
    public class Foo <T>{
    private T myT;
    public T getT() {
    return myT;
    public void setT(T aT) {
    myT = aT;
    public class Bar extends Foo<Bar.Baz> {
    public static void main(String[] args) {
    Bar myBar = new Bar();
    myBar.setT(new Baz());
    System.out.println(myBar.getT().toString());
    private static class Baz {
    @Override
    public String toString() {
    return "Baz";
    Eclipse compiles and runs the code even though the Baz inner class is private.
    javac reports:
    Bar.java:1: Bar.Baz has private access in Bar
    public class Bar extends Foo<Bar.Baz>
    ^
    1 error

    As I said in my original post its not just eclipse that thinks the code snippet is compilable. IntelliJ Idea also parses it without complaining. I haven't looked at the java language spec but intuitively I see no reason why the code should not compile. I don't think eclipse submitting bug reports to sun has anything to do with courage. I would guess they just couldn't be bothered.

  • Replacing Mac Mini Hard Drive with SSD, and New ML Install

    I have a mid-2011 Mac Mini, and it has been running very sluggish, even when there are multiple free GB of RAM and the processor is only at 10 to 20% of capacity. I ran TechTool Pro 6 to do a scan of the whole machine, and it didn't detect anything out of the ordinary.
    At this point I am guessing that it's probably a software issue. I have tons of processes running in the background all the time, and have installed hundreds of programs over the last two years, so it could be anything number of things that are somehow messing up Mountain Lion.
    So, I would like to replace the 500GB internal hard drive with a 120GB SSD Drive (Samsung 840 Series), and put a fresh install of Mountain Lion on the SSD, put the 500GB in an external enclosure, and see if that fixes the problem.
    Can someone explain the best way for me to do this, in a step by step list?
    I can figure out how to accomplish each step, I just need some overall guidance as to how I should approach the whole thing.
    Thanks very much!
    Some other notes:
    I have a 3 TB hard drive that I can use to back up everything on the 500 GB hard drive, but I'm assuming that time machine isn't the best way to back everything up, since I won't be able to restore the machine on the 120GB drive that I want to boot from.
    Normally, I would get the internal 500GB down to 100GB of data, and then clone it on the SSD, and make the swap, but I'm assuming that cloning the drive will potentially replicate the source of the slowness, so I'm assuming that isn't the best way to proceed.

    Here is my opinion and steps I would perform.
    Back up your system first.
    Check the iFixit.com site for a guide of how to replace the drive. Review Steps 3 and 4 BEFORE you replace your drive.
    If you have a USB thumb drive with the ML 10.8.3 installer, skip to step 6.
    If you don't have a USB thumb drive with the ML 10.8.3 installer, download the OS X Recovery Disk Assistant and use a 1-4GB thumb drive to create a Recovery HD on the thumb drive you can boot from. Skip to step 6.
    If you have neither of the above, after replacing the drive, restart into Internet Recovery by pressing/holding the Command+Option+R keys. Since you have a mid-2011, Internet Recovery will ONLY allow you to download and install Lion since that's what probably came preinstalled on your system.
    After you replace your drive and you are booted into the OS X Utilities Menu from one of Steps 3-5, select Disk Utility and format your new drive as Mac OS Extended-Journaled with the GUID partition table.
    Go back to the OS X Utilities Menu and select Reinstall Mac OS X.
    After the download and install of OS X you can run through the setup creating your user account (same as you had on you old drive).
    If you were able to install OS X ML, skip to step 11.
    If you installed Lion, you will have to login to the App Store and download/install your purchase of ML.
    Run Software Updates to bring your OS X up to date.
    Now you can restore any data files and apps that will fit onto the new drive from Time Machine. Enter Time Machine and navigate to your last backup to view the /Applications folders and your user folders (e.g Documents, Downloads, Music, etc.).
    For your email, you can open Finder then press the Option key to see your user Library folder in the list. Select it to open it then enter Time Machine again and navigate to your last backup so that your user Library folder is opened in Time Machine. Copy your Mail folder to your Desktop so you can copy it back to your current user Library.
    I think that's it.

  • Brushes greyed out with Hue Saturation adjustment layer

    Hi,
    I was editing a photo using a hue saturation adjustment layer in CS6 and wanted to paint on the mask to hide some small areas. However, the brushes palette is greyed out. Any ideas what's causing this?
    Kindest regards

    What version photoshop cs6 are you using?
    Have you applied all the latest updates from within photoshop under Help>Updates?
    Resetting the photoshop preferences might fix it as well:
    http://forums.adobe.com/thread/375776?tstart=0

  • Wierd bug with menus and subtitles on Intel mac

    I have found DVDSP4 will not let me place buttons on a menu!! The mouse clicks don't do anything in the menu viewer. I suspect some system incompatibility is this is also why I can't drop a subtitle into the subtitle streams either with DVDSP4 enev though it works fine on DVDSP3 on my G5 machine. Has anyone seen this strange bug before?
    I use a Wacom Intuos tablet, have a four-core Intel MacPro with 4GB of RAM, and use a LOT of graphic applications (FC5, Motion, Maya, Poser, Vue, Illustrator, Photoshop, and many molecular modeling packages)
    Has anyone seen this problem before (and is there a remedy)?
    Thanks
    tom hsu

    Do you have the Universal Version of DVD SP? I know you mentioned it is academic but did not recall if you have the proper one for the Intel Macs(?)

  • Just got some bugs with Dock and Dashboard

    Hi!
    Been using my mac for 1 year now. Sudden some bugs just came by.
    I was using two widgets; "Ordbok" and "TriTrans".
    When I now try to use TriTrans I get this: http://bildr.no/view/75953 and I can't enter a search.
    When I try to use Ordbok i get this: http://bildr.no/view/75954
    I tried to make a new account just to see if I got the same problem and I sudden did. Then I went back to my main account and deleted the Dock, Desktop and Dashboard pref files (in Library/Preferences). Rebooted and tried again. Didn't work.
    When I made a new account I also noticed that the Dock had an icon with the "question mark" (this ting: ?). When I hovered it I got: "iMovie". Some icons to the left I got a working "iMovie HD". Where does the iMovie (wannabe) icon come from? (It was a new account).
    Anyways, someone now how to fix some of these?
    Thanks!
     MacBook   Mac OS X (10.4.9)   2 Ghz Intel Core Duo, 1 Gb RAM

    Ahh, that solves my widget problem. Thanks!
    Btw, someone who got any idea of the "question mark" icon I get in the dock when deleting the Dock config file or add new user? It says "iMovie" but beside it I got the "iMovie HD" icon, working.

  • Apple - PLEASE fix the graphical bug with Dock and Stacks! PLEASE!

    Using popular Mac games such as Diablo II, Freeverse's Wingnuts, Ambrosia's Aperion, and Blitwise's Super DX-Ball (as well as a LOT more) results in a common graphical glitch with the Dock and stacks, making fan stacks totally useless until I restart my iMac. Killing and relaunching the Dock doesn't fix it. Only restarting my Mac temporarily sorts it out. This is a highly annoying bug most often set off by games that Apple STILL hasn't fixed as of 10.5.3. So I let every developer (who I do not blame, BTW) know whose product results in this bug, in the hope they will apply pressure to Apple. Leopard has been the buggiest release since 10.1 IME and Apple is taking there sweet time about crushing such crippling bugs. Suffice to say it's really ******* me off.
    Here is a screenshot from another 24" iMac afflicted by this bug after running a game:
    <http://img231.imageshack.us/img231/5324/corrupteddockandmenuletpk1.png>
    Notice the open stack is just grey bars. The icons and names are not
    showing.
    Regards,
    Jamie Kahn Genet

    Hi Wizardling
    These forums are User to User technical forums Apple employees do not often read these forums. You can do 1 of two things.
    1. Send feedback to Apple via http://www.apple.com/feedback or
    2. Sign up for a free developer account and open a bug report with Apple through http://bugreporter.apple.com
    Hope this helps
    J.C

  • Outlook 2011 for mac no longer syncs with calendar and contacts

    Hi all,
    Not sure whether the recent security update botched up my sync, but after recently upgrading to MS Office with Outlook 2011 for the Mac, my contacts and calendar items no longer sync.  I've applied the revised security patch to no avail.  In fact, I noticed that my contacts were no longer syncing prior to the security update, and in the last day or so, I have noticed that calendar items have ceased to sync.  I've tried all of the Microsoft and Apple knowledge-based recipes to correct the problem, but it persists.  I may be missing something, or performed the steps out of sequence, but I've tried them many times and I'm sure at least once was to the letter.
    The oddity is that the problem appears to be a broken link between iCal and Outlook via the sync process, which uses MobileMe and is administered through iTunes.  Perhaps someone has a straightforward instruction set to fix that link?
    Is anyone else having this problem of late?  I am on Snow Leopard, 10.6.8 on a 2011 MBP with MS Office 2011 and SP1 installed.
    Thanks much in advance for any helpful advice.

    Thanks Julian for the suggestion. Unfortunately all still checked out and nothing amiss. However, after reinstalling OS 10.6.8 it appears that my calendar items are syncing once again, but not my contacts. I appreciate the suggestion none the less.
    This same thing seems to happen each time I've upgraded Office with the associated version of Entourage, and now Outlook. Ah, well..nothing's ever simple. But I am thoroughly enjoying Outlook and the rest of the Office suite.

  • Possible Bug with Drag-and-Drop Being Published via HTML5 - Getting "Undefined" Error When Dragging Object

    Hello,
    I came up with a way to use drag-and-drop interactions that will take advantage of file input so that I may create a drag-and-drop interaction that uses one draggable object over and over allowing multiple scoring/tracking possibilities.  Example use...is having the draggable object be dynamic in that it randomly changes its text so that a learner can drag a term it's possible classification.........thus allowing the possibility of having many terms easily loaded without having to redo a drag-and-drop interaction for each needed terms/classifications updates/changes.
    My Issue: When using a variable to represent the text for a draggable Smart Shape object, I'm getting the error message "undefined" when, clicking/pressing on the object, as well as during the drag of the object. This issue occurs when publishing the project in an HTML5 format.  Flash interestingly enough seems to work perfect...but we are not interested in publishing via Flash any longer.
    To better help you explore this error message, I've set up a test project so that you can see when and how the "undefined" message shows up during a drag-and-drop interaction.  I've also included the Captivate 8 project file used to make the exploration project I'm sharing in this post.
    Link to Captivate project I created for you all to explore "undefined" error message": http://iti.cscc.edu/drag_and_drop_bug/
    Link to this Captivate 8 Project file: http://iti.cscc.edu/drag_and_drop_bug.cptx
    It's pretty interesting how things react in this demo, please try the following actions to see some interesting happenings:
    Drag the Yellow (or variable drag box) to the drag target.
    Drag Black Hello square to Drag target and click undo or reset - watch the undefined message come up on the Yellow (or variable drag box).
    Drag the Yellow (or variable drag box) to the drag target and then use the undo or reset.
    Move both draggable boxes to the drag target and use the undo and reset buttons...
    Anyhow, I know you all are sharp and will run the demo through its paces.
    I'd really be very honored if anyone help me figure out how I could (when publishing out to HTML5) no longer have the "undefined" error message show up when using drag-and-drop with a variable for shape text. This technique has been well received at the college I work at...and I have many future project requests for using such an idea on a variety of similar interactions. I'd love see a solution or see if this might be a bug Adobe may be able to fix!
    I tried to find a solution to the issue documented here for quite some time, but I was not able to find anyone with this problem much less attempting the idea I'm sharing in the help request -  save the darn "undefined" message that comes up!
    Many thanks in advance for any help and/or direction that you all may be able to provide,
    Paul

    Hello,
    I just wanted to supply a minor update related to my drag-and-drop question/issue stated above:
    I did another test using Captivate 7, and found that the undefined error (publishing as HTML5) does not appear and the variable data remains visible - except the variable data turns very small and does not honor any font size related settings.
    I did go ahead and submit this to Adobe as a possible bug today.
    Thanks again for any help related to this issue.  If the issued documented above is solved, it will allow many amazing things to be done using Captivate's drag-and-drop for both regular type projects as well as interaction development for iBooks! 
    Matter of fact if this issue gets fixed, I'll publish a Blog entry (or video) on way's I've used Captivate's drag-and-drop to create dynamic learning activities for Higher Ed. and for use in iBooks.
    ~ Paul

  • Possible bug with TREAT and EXECUTE IMMEDIATE

    Hello, i experienced a strange behavior which seems to be a bug.
    Consider following definitions:
    CREATE OR REPLACE TYPE T_Base FORCE AS OBJECT (
      DummyProperty NUMBER
    ) NOT FINAL;
    CREATE OR REPLACE TYPE T_Child UNDER T_Base (
      AnotherDummyProperty  NUMBER
    CREATE OR REPLACE FUNCTION SpecificValidation (iValue T_Child) RETURN NUMBER IS
    BEGIN
      -- some specific validation is done here, not important for the example
      RETURN NULL;
    END;
    CREATE OR REPLACE PROCEDURE ValidateIt (iValue T_Child) IS
      lResult NUMBER;
    BEGIN
      -- The principle used here is that each client can have its own implementation of validation function, and when it does not exist, we do not care.
      -- In reality we put functions and procedures into packages, I narrowed it to a minimal working example.
      BEGIN
        EXECUTE IMMEDIATE 'BEGIN :lResult := SpecificValidation(:iValue); END;'
          USING OUT lResult, IN iValue;
      EXCEPTION WHEN OTHERS THEN
        IF INSTR(SQLERRM, 'PLS-00201') = 0 THEN
          RAISE;
        END IF;
      END;
    END;
    CREATE OR REPLACE PROCEDURE Process (iValue T_Base) IS
    BEGIN
      -- in fact we know that iValue must be of typ T_Child, it is checked using IS OF ( ) operator and exception is raised if this check fails
      -- This does not work for some reason.
      -- It fails in EXECUTE IMMEDIATE with PLS-00306. I don't really get why, because ValidateIt accepts a value of type T_Child and it passes it to the validation procedure, which also expects value of type T_Child.
      ValidateIt(TREAT(iValue AS T_Child));
    END;
    CREATE OR REPLACE PROCEDURE Process2 (iValue T_Base) IS
      lChild  T_Child;
    BEGIN
      -- The only difference here is that result of TREAT is saved to a variable.
      -- This works as expected.
      lChild := TREAT(iValue AS T_Child);
      ValidateIt(lChild);
    END;
    In reality it is much more complex, I narrowed it to a minimal working example.
    Now when running this:
    DECLARE
      lItem T_Base := T_Child(5, 2);
    BEGIN
      BEGIN
        -- This call will end up with PLS-00306 error.
        Process(lItem);
        dbms_output.put_line('Process completed successfully.');
      EXCEPTION WHEN OTHERS THEN
        dbms_output.put_line('Exception when calling Process.');
        dbms_output.put_line(SQLERRM);
        dbms_output.put_line(DBMS_UTILITY.FORMAT_ERROR_BACKTRACE);
      END;
      BEGIN
        Process2(lItem);
        dbms_output.put_line('Process2 completed successfully.');
      EXCEPTION WHEN OTHERS THEN
        dbms_output.put_line('Exception when calling Process2.');
        dbms_output.put_line(SQLERRM);
        dbms_output.put_line(DBMS_UTILITY.FORMAT_ERROR_BACKTRACE);
      END;
    END;
    then call to Process fails with PLS-00306 on EXECUTE IMMEDIATE.
    The only difference between Process and Process2 is that in Process2, result of TREAT is saved to a variable of type T_Child.
    Is this behavior documented somwhere or is it a bug?

    That's interesting. I would say it is, or should be, a bug.
    Also interesting is, when I re-write your example to eliminate dynamic SQL and instead rely on dynamic method dispatch, the problem goes away... first, the changes:
    drop type T_Child;
    drop type T_Base
    CREATE OR REPLACE TYPE T_Base FORCE AS OBJECT ( 
      DummyProperty NUMBER 
    ) NOT FINAL
    CREATE OR REPLACE TYPE T_Child UNDER T_Base ( 
      AnotherDummyProperty  NUMBER 
    create or replace type T_Base_Processor as object (
      dummyProperty    number
    , static FUNCTION GetClientProcessor(iClientId varchar2) RETURN T_Base_Processor
    , member FUNCTION SpecificValidation (iValue T_Child) RETURN NUMBER
    , member PROCEDURE ValidateIt (iValue T_Child)
    , member PROCEDURE Process (iValue T_Base)
    , member PROCEDURE Process2 (iValue T_Base)
    ) NOT FINAL
    create or replace type T_Another_Processor under T_Base_Processor (
      overriding member FUNCTION SpecificValidation (iValue T_Child) RETURN NUMBER
    create or replace type body T_Base_Processor
    is
      static FUNCTION GetClientProcessor(iClientId varchar2) RETURN T_Base_Processor IS
    BEGIN
      return    case
            when upper(iClientId) = 'ADMINISTRATOR' then
                new T_Another_Processor(null)
            else
                new T_Base_Processor(null)
            end;
    END;
      member FUNCTION SpecificValidation (iValue T_Child) RETURN NUMBER IS 
    BEGIN 
      -- some specific validation is done here, not important for the example 
      dbms_output.put_line('T_Base_Processor.SpecificValidation');
      RETURN NULL; 
    END; 
      member PROCEDURE ValidateIt (iValue T_Child) IS 
      lResult NUMBER; 
    BEGIN 
      -- No more need for dynamic SQL, instead rely on dynamic dispatch
      lResult := SpecificValidation(iValue);
    END; 
      member PROCEDURE Process (iValue T_Base) IS 
    BEGIN 
      -- in fact we know that iValue must be of typ T_Child, it is checked using IS OF ( ) operator and exception is raised if this check fails 
      -- This does not work for some reason. 
      -- It fails in EXECUTE IMMEDIATE with PLS-00306. I don't really get why, because ValidateIt accepts a value of type T_Child and it passes it to the validation procedure, which also expects value of type T_Child. 
      ValidateIt(TREAT(iValue AS T_Child)); 
    END; 
      member PROCEDURE Process2 (iValue T_Base) IS 
      lChild  T_Child; 
    BEGIN 
      -- The only difference here is that result of TREAT is saved to a variable. 
      -- This works as expected. 
      lChild := TREAT(iValue AS T_Child); 
      ValidateIt(lChild); 
    END;
    end;
    create or replace type body T_Another_Processor
    is
      overriding member FUNCTION SpecificValidation (iValue T_Child) RETURN NUMBER
    is
    begin
      -- some other specific validation is done here, not important for the example 
      -- You could even call the overridden method as well using
      --   treat(self as T_Base_Processor).SpecificValidation(iValue)
      dbms_output.put_line('T_Another_Processor.SpecificValidation');
      RETURN NULL; 
    end;
    end;
    And again with slight modifications, your test block:
    DECLARE 
      lProcessor T_Base_Processor := T_Base_Processor.getClientProcessor('JOE');
      lItem T_Base := T_Child(5, 2); 
    BEGIN 
      BEGIN 
        -- This call no longer throws a PLS-00306 error. 
        lProcessor.Process(lItem); 
        dbms_output.put_line('Process completed successfully.'); 
      EXCEPTION WHEN OTHERS THEN 
        dbms_output.put_line('Exception when calling Process.'); 
        dbms_output.put_line(SQLERRM); 
        dbms_output.put_line(DBMS_UTILITY.FORMAT_ERROR_BACKTRACE); 
      END; 
      -- Demonstrate dynamic dispatch by choosing a different processor
      lProcessor := T_Base_Processor.getClientProcessor('ADMINISTRATOR');
      BEGIN 
        lProcessor.Process2(lItem); 
        dbms_output.put_line('Process2 completed successfully.'); 
      EXCEPTION WHEN OTHERS THEN 
        dbms_output.put_line('Exception when calling Process2.'); 
        dbms_output.put_line(SQLERRM); 
        dbms_output.put_line(DBMS_UTILITY.FORMAT_ERROR_BACKTRACE); 
      END; 
    END; 
    T_Base_Processor.SpecificValidation
    Process completed successfully.
    T_Another_Processor.SpecificValidation
    Process2 completed successfully.
    Gerard

  • Enormous bug with intel and hdv

    dear Friends,
    I discovered a bug testing my octocore intel with compressor.
    Unfortunately, encoding a file from hdv to m2v, an intel processor is 4 times slower than a non-intel processor,
    ...only in this case...!
    An 1,30 minutes clip needs 12 minutes with a power book and the same file needs 45 minutes with an octocore 3.00 ghz...i tried other solutions swapping the disks (system and storage) from one machine to another but the problem remain in the same machine....
    ...awaiting for an apple resolution....

    What version of Compressor are you using? I seem to recall some post about this awhile back...don't remember if an update helped...I think it did.

Maybe you are looking for