Photoshop crashes under Yosemite when not all fonts are loaded.

Every time. Loading some fonts through Font book. When the resolve fonts modal appears on top of the canvas, Photoshop automatically quits.
Any ideas?

After some desperate troubleshooting, here is what I found.
If I delete the PS prefs file (cmd-opt-shift on opening Photoshop), and then opening a file, I get the resolve type via Typekit screen:
On the next screen, if I select don't resolve, the file will open fine:
But when I quit and open the file again, it auto quits. This is the screen just before it auto quits (the warning triangle is replaced with a loader animation.)
it seems that selecting 'Don't show on document open' in screen no. 2 is a temporary fix to this annoying bug.
Thanks,
Michael

Similar Messages

  • Trying to add album from iphoto into idvd slideshow.  Not all photos are loading.  Message "creating thumbnail images...(31 remaining).  Been there a long time.  What is wrong?

    trying to add album from iphoto into idvd slideshow.  Not all photos are loading.  Message "creating thumbnail images...(31 remaining).  Been there a long time.  What is wrong?

    Open your iPhoto Library, go to that particular album and verify that you can view the full sized version of each image by double clicking on them.  Report back with the results.
    OT

  • Not all things are loading in Safari (for me)

    Ok, well I frequently check my friends myspace's and blogs. And they usually are updated aout every other day with comments and/or new pictures/new things they talk about. So on myspace one of my friends adds new things to it about every day. So I constently check hers. But in the past two weeks a while side of her myspace was not visable to me. So I went in FireFox to see if it was just like that or if it was with Safari. I logged in and went to her myspace. Both sides of information and everything were they. I quit Safari and tried again. Still nothing. But one day I went and checked on Safari and there it was. I left her a comment and when I went back I couldn't see that one side.
    Now, I could just use FireFox for myspace, but not a lot of the symbols and stuff [for example hearts] show up.
    So, is there a downloadable program or an add-on that may fix this. Like maybe a FireFox tab (because I know on Windows FireFox there is an Internet Explorer tab that lets you work in FireFox, but if something doesn't load, you go to that tab and you can view everything perfectly).
    Thanks for the help!
    P.S. Are there any add-ons for Safari, if so where would you get them?

    Nothing is loading in Safari for me since I installed the update this weekend. Firefox and Opera work just fine.
    I was on the phone with Apple for over an hour today and could not get it fixed. They were completely perplexed.
    They need to get this solved, and for now, they seem to ignore the issue on their own support site. Clearly, lots of us are having problems.
    Wish i had never installed that update. Apple's loss is Firefox's gain, I suppose.

  • OS X 10.8.5, Photoshop 13.0 x 64. *All* fonts lean 10°. Looks like a preference setting, but where? Or, how do I straighten them?

    OS X 10.8.5, Photoshop 13.0 x 64. *All* fonts lean 10°. Looks like a preference setting, but where? Or, how do I straighten them?

    Make sure you are not set to faux Italics in the Character Panel:

  • When I back up my Mac Book Pro to an external hard drive not all files are backed up. Can anyone help please?

    When I try to back up my Mac Book Pro to an external hard drive some of the files are backed up but not all files are backed up. I don't understand. Can anyone help please?

    I've used time machine in the past and couldn't get to the bottom of the problem so I've recently downloaded and am using carbon copy cloner and I get the same problem. The files that are missing are just word and number documents. Seems so odd.
    Thanks for replying
    John

  • Not all users are displayed for log on after a reboot or startup...

    Problem summary: Not all users are displayed for log on after a reboot or startup...
    This problem only occurs after a fresh start-up or restart. The only users displayed are the initial (admin user) and "Guest". Two other (non-admin) users are not shown for log on.
    To work around this problem and get them to log on we have to log on as the admin user, then we can see the other users in the Fast User Switching menu (top right-hand corner of the screen), listed under the current logged on user. After selecting the non-admin user we can log in and use the laptop as normal.
    If we lock the screen, use fast user switching or log out all users; all users are available for log in, until a reboot is done; at which point the non-admin users disappear again and we have to log in as the admin user and use fast user switching again.
    The laptops are both brand new MacBook Airs. The initial configuration of Mac OS X Yosemite was done using the Apple ID of the purchaser (parent) and then the OS was patched, immediately, through the App store (no further updates available as of the date of this posting). After this Family Sharing was activated and new users set up for the two children who will be using these laptops.
    Has anybody else experienced this problem with Yosemite?
    Cheers,
    David.

    David,
    Users not enabled for FileVault unlock are only able to log into the computer after an unlock-enabled user has started or unlocked the drive. Once unlocked, the drive remains unlocked and available to all users, until the computer is restarted.
    FileVault has to be On.
    To Enable the users to be able to unlock FileVault Go to:
    System Preferences > Security & Privacy > FileVault ( Tab ) > Click the Lock in the bottom left > Put in your administrator password > Should see an option to Enable Users > Enable User.
    Hope that helps,
    Weston
    Supporting Articles,
    OS X: About FileVault 2 - Apple Support

  • Photoshop Touch is Chinese, Japanese and Korean fonts are supported?

    Photoshop Touch is Chinese, Japanese and Korean fonts are supported?

    I think Japanese is supported but the not the others. (Click the "Languages" link.)

  • Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download).  Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the p

    Regarding iTunes U courses, would I be able to link to books/sites (like say an amazon hardback book or link to a kindle book they can purchase and download).  Considering that not all books are available on iBooks I'm hoping this is allowed.   Also the possibility on monetizing since amazon gives commission for linking.  
    This question is for both the uncredited (private) courses and the bigger accredited accounts.    I am a  developer trying to learn how to help my area schools and also have some ideas for my own courses.    Obviously keeping within the iTunes U app would be preferred in most cases (to the learning experience) since they can take notes and see them within the app itself.
    If the reply comes from a non-apple employee please let me know (or better yet, link to) where that is clarified.   I would hate to develop something just to later find out it is against the apple iTunes U agreement.

    Fair question
    And, to be even more fair, I have to tell you that I get that every single day. And it's getting worse (or better, depending on how you look at it).
    I always try to let people know it's a long way until you get to a confortable point, a point where you can create something. And that's exactly what I am trying to do, or at least asking how/if I should do it. And then I let them know where to start. That's what I want.
    Thanks.

  • BPM Monitoring: not all messages are groupped my bpm name

    Could you explain me why not all messages are groupped my bpm name?
    There are messages above bpm name that was sent in this bpm.
    It is too diffucult to monitor messages in BPM monitoring.

    Hi Denis,
    Is the concerned message a synchronous message or a message that relates two integration processes? If yes, this about to be changed and will be corrected in the next SP.
    Best regards
    Joachim

  • Home sharing iMac and MacBook Pro: not all songs are playable

    Hello
    I set up Home Sharing between my iMac and MacBook Pro so that I could stream the music that's on the iMac to the MacBook Pro. On the MBP there are no songs, all of them are in Apple Lossless format on my iMac. I first tried to use "‘share my library on my local network" but because I wanted the play count to go up as well I chose for "Home Sharing". Setting up was simple. After all preferences were adjusted, I opened iTunes on the MBP and it immediately found the shared iMac library. There's now only one problem: not all songs are playable. Some don't even start. How is this possible and what do I need to do to resolve this?
    FYI: the iMac is connected via ethernet to my cable modem which sends a wireless Wi-Fi signal to the MBP. Signal quality is excellent.
    Also, is it possible that playcount is only available with Home Sharing and not with "share my library on my local network"?
    Thanks!

    It very well could be the antivirus app, most are intrusive and debilitate rather than enhance performance and should be removed using the developers instructions. You haven't really told us anything useful such as any settting you may have changed. However if you began working backwards resetting any changes and uninstalling the apps added since the performance issue started then you probably will find your issue. 

  • Not all albums are syncing with between itunes match and iphone 5.. WHY!!!

    Not all albums are syncing with between itunes match and iphone 5.. WHY!!!

    First, disable iTunes Match on the iPhone. Open the Music app and let the content clear out. Now, in iTunes, disable iTunes Match while holding down the Option key (Shift for Windows). Quit iTunes, wait a few seconds, and re-open it. Turn iTM back on and let it complete it's scan. The songs that are "waiting" ought to get converted to "purchased," "uploaded" or "matched." Once the scan is complete re-enable the service on the iPhone.

  • My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred - any ideas?

    My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred and available - any ideas?

    Rodger,
    Thank you for your gracious welcome . . .
    and thank you for your swift response . . .
    and thank you for your information (and encouragement!).
    Yes, I read that too, but searched in vain for the specifity of, say, your direction:
    "Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
    So I shall!
    Again, many thanks.

  • When converting over to HTTPS and PKI for clients, not all actions are available in configuration manager cpl

    I'm not exactly sure which forum heading this should go under so if this isn't correct please let me know or move it on my behalf.  
    So I am trying to setup Internet Based Client Management in SCCM 2012 R2 and have come across a few articles on how to do so.   I think I have mostly gotten it to work but I seem to be having a client issue when deploying new machines.  My already
    deployed servers seem to have picked up the PKI setting no problem.  In the past when I would deploy a new windows client everything would be fine.  When i converted over to PKI in my test environment I am now having issues when I go to deploy a
    new windows client. I don't get all of the Actions listed in the Configuration Manager control panel.  All I have are Discovery Data Collection, Machine Policy Retrieval and Eval, User Policy Retrieval and Eval, and Windows Installer Source list Update
    Cycles, before all of them would populate no problem.  I have let this machine sit here for several hours and nothing has changed yet.  It does say PKI for client certificate.  Sometimes when I would deploy new machines it would say NONE for
    Client certificate.  In my production environment it says self-signed.  I have found if i uninstall the client and re-install the client it does populate all of the cycles but I don't understand why it is not working on deployment.
    Ok so maybe not all the time that when i reinstall the client it fixes it.  I just did an uninstall and reinstall on a test client and all it has under actions are machine and user policy cycles.
    Does anyone have any ideas?

    Hi,
    I think SCCM client installed before the GPO applied, so you don't a certificate available when it is required.
    You can export and import the certificate by using MDT integration, try this blog for PKI part:
    How To: Build and Capture in Configuration Manager 2012 using HTTPS
    And in addition, you can upload the log to your onedrive so you can share with us.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Photoshop Crashing on Win8 when I click CTRL+A

    I have a Photopshop Trial, not going well right now,
    Ever since I upgraded to Win 8 it will not let me passed pressing CTRL+A. It simply crashes out ot the programme.
    I have gone to all the trouble of uninstalling it and reinstalling the programme which took a long time and didn't help. It still crashes.
    Can somebody suggest anything?
    Here what I got from Event Viewer
    Faulting application name: Photoshop.exe, version: 13.0.0.0, time stamp: 0x4f61beba
    Faulting module name: ig4dev32.dll, version: 8.14.10.1930, time stamp: 0x4aba6fdd
    Exception code: 0xc0000005
    Fault offset: 0x0000d09f
    Faulting process ID: 0x3fc
    Faulting application start time: 0x01cdb77432ccb933
    Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS6\Photoshop.exe
    Faulting module path: C:\WINDOWS\SYSTEM32\ig4dev32.dll
    Report ID: d66cdc9c-2368-11e2-afa9-001f3ad70633
    Faulting package full name:
    Faulting package-relative application ID:

    ig4dev32.dll - Intel Graphics accelerator driver is faulting.
    First off, I see your Photoshop version is 13.0. Open Photoshop > Help > Updates (Check and download all updates). Current version is 13.0.1
    I'd also recommend you visit Intel website to check and download any available updates for your video card driver.
    Post back with the progress. And if it doesn't work, we'll figure out a solution for you.

  • How to automatically complete an SD Contract when not all quantity is used

    Hi,
    I have a situation where it often happens that not all the quantity in an SD Quantity Contract is used in Sales Orders. When this happens, currently the business users have to go into the Contract, and amend the quantity in order to complete it. I am looking for a way to configure SAP so that these Contracts will automatically move to Complete Status when a certain percentage of the quantity has been used.
    I have tried Completion Rules B and C on a new Item Category (copied from KMN).  When I select B the Contract is marked as complete after the first Sales Order is raised, regardless of the quantity. When I select C the Contract does not mark as complete. both times I set up a Contract for 100KG, then Ordered 98KG.  I tried amending the under-delivery tolerances on the Customer Master and it had no effect.
    I have searched the SD Forums, looked on SAP Support Marketplace, and tried Google - but I can't find anything that describes my situation. Can someone out there advise?
    Thanks,
    Val

    Hi,
    I don't think this can be achieved in SAP std.
    You have to go for custom development in ABAP . You can achieve this through userexit MV45AFZZ. The code will be executed when saving the subsequent sales document i.e. Sales order. Once the said percentage is achieved this code will set the status of contract as referenced.
    Hope this will help you.
    Thanks and regards
    Atul

Maybe you are looking for

  • My story on Forgot Mail and Password

    Hi, for two weeks now i havent got into my account for some reason (I think it has been hacked or ive lost my password. i only have one password so i dont get how) so i though that i would try to reset it like any other site.  I try to reset it and i

  • Updating a record on a certain date

    Hi, I have a little problem with updating a record on a certain date specified in the same table. OK so i have a table called 'users' and in that table i have the following fields: AdID Username AdStatus AdStartDate AdPeriod (and a few more but i've

  • Oracle BI Office Integration

    Hi all, Office integratin of oracle bi seems simple and details are here. http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/e10416/biofficeinstall.htm But my problem is after installing OracleBIOffice.exe, I can't create a connection. I made a

  • Report 6i -bad Cyrilic in PDF

    I have Oracle instance 8.1.7,character set UTF8. My clients are Windows NT, with installed proper fonts and NLS_LANG=AMERICAN_AMERICA.CL8MSWIN1251(Cyrilic). When I run reports(6i),output is OK(displays Cyrilic),but when I try to generate output to .P

  • Traffic Shaping on Sub-interfaces

    Hi all, On my network i am trying to give preference to certain traffic type A over another traffice type B  over a VSAT link. the VSAT link is about 64Kbps/64Kbps and this link is connected to a router subinterface. I initially thought of CBWFQ to r