Photoshop CS 5.1 loading error(20)

I"m getting "The Setup encountered an error(20) during install.  Pleaser restart the machine and try again."  Its a new Win 8 machine, and trying to load Photoshop CS 5.1.  Any ideas?

Hi qwerty693,
This error comes when software is not extracted correctly.
If you are installing photoshop CS5.1 from a downloaded media then I request you re-extraact .7z file using winrar then try to install
If still not work then redownload photoshop CS5.1 and extract and then try to install the same.
Regards,
Jatin Demla

Similar Messages

  • Photoshop Cs4 Extended Starting/Loading Error

    Hello Everyone,
    Below is a screenshot of the error I'm having.
    I'm on Windows7 and trying to run Photoshop PS4 Extended. Everything was running fine the other day. But today it suddenly started doing this when I started it up. It actually looks the same but the top par switches from what you see to the normal title bar but with the words "Not Responding" at the end. I've tried uninstalling and reinstalling it, but no luck. Same deal when soing a system restore.
    All drivers are updated as is Photoshop (11.0.1). Nothing has been installed and my Norton 360 is up to date and found no errors. This error only happens with Shotoshop. Not Flash nor Dreamweaver. I also have plenty of Ram and Hard Drive space avalible (30+ gigs). Please Help!

    It's not the Video Card. It's fully updated, no dust, or wire issues.
    It's not the drivers either. At least not from what I can tell. The Drivers have been updated fully.
    Is there a way I can remove all of the Photoshop Drivers (without hurting other adobe programs) and start from scratch. Basically remove Photoshop fully from the hard drive. No other program on my computer does this. Not one. It must be a Photoshop issue.
    Here's the weird thing. I've just created a portable version of the program and it works fine. It's the installed version that's acting up.
    But nothing else works.
    Before anyone ask, no I will not give you the portable version nor will I teach you how to make your programs portable. The portable version has my serial/activation info in it and I'm not able to give that out. Buy the program like we did. And making programs portable and/or sharing the knowledge is too risky. Tends to illegal downloads and crap. You wouldn't want it anyway. Only default programs/pugins work with it. So doing this actually limits the artist a lot.

  • My photoshop will not load, error message 148.3

    my photoshop will not load, error message is 148.3

    This is a licensing error. The usual fix is to reinstall the program after running the Creative Suite Cleaner Tool. also read this:
    Error "Licensing has stopped working" | Windows
    Error "Licensing has stopped working" | Mac OS
    If you can't fix it, you will have to provide more info like system specs and what version of PS you actually use...
    Mylenium

  • As I try to load adobe photoshop elements 12 I get error "object already exists"

    As I try to load adobe photoshop elements 12 I get error "object already exists" does anyone knows why?

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

  • Game has stopped loading, error code - 1712?

    Sims 3 pets has stopped loading error code - 1712?

    A Photoshop installation is tied to the machine it was installed on. Moving it to or from a hard drive breaks the licensing.
    The answer is easy: Reinstall CS4 from your disc. and apply all updates.
    Gene

  • Getting Page Load Error while opening a Opportunity in new window

    Hi All,
    outbound SSO is enabled.
    when i try to punch-in to my application from CRM through opportunity web link with Web Link Target as "open in custom tab" its working properly, but when i have Web Link Target as "open in new window" i am getting page load error. previously with out Outbounf SSO it is working properly.
    Do i need enable any settings in CRM
    thanks

    when the web link target is "open in new window" or "open in current window" the request send to third party application from CRM ONDemand is HTTPS request as SSL is not enabled it is giving "page load error"(In the web link we are specifying http only) (User athentication type is "username & password/ SSO")
    Is there any setting in CRM Ondemand to send Http request only instead of HTTPS?

  • The application, C:\Program Files\Adobe\Adobe Photoshop CS2\Photoshop.exe, generated an application error The error occurred on 10/01/2009 @ 11:31:59.964 The exception generated was c0000005 at address 7C81BD02 (ntdll!ExpInterlockedPopEntrySListFault)

    Hi,
    I get this error randomly when i run my VB 6.0 application which calls Photoshop CS2 actions. I went through many forums, but could not manage to get the right solution for this.
    "The application, C:\Program Files\Adobe\Adobe Photoshop CS2\Photoshop.exe, generated an application error The error occurred on 10/01/2009 @ 11:31:59.964 The exception generated was c0000005 at address 7C81BD02 (ntdll!ExpInterlockedPopEntrySListFault)
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp."
    OS: WIndows Server 2003 SP2
    Photoshop CS2
    ANy help on this will be highly appreciated.
    Thanks in advance,
    Smiley

    I see this sort of error notice in Bridge and Photoshop, preceded by the message " Photoshop (or Bridge) has encountered a problem and must close. Tell MS.
    Yes or No."
    It most frequently happens in PS when running Dfine 2.0. I have no clue what triggers the Bridge closure. It happens randomly.
    CS3, so nobody gives a tinkers dam, I suppose.
    I see this kind of message in software testing on a regular basis. Of course, when the test is under way, the software is generating a detailed log file which we package up as part of a bug report. Then at the bug scrubs, lively discussions ensue as to who has to fix what!
    I can only image what would happen if the Dfine people and the PS people had to sit through one of those!

  • Error building project using kXML2 - "Class loading error: Wrong name"

    Hi,
    I'm testing the XML-Parser KXML2 and downloaded the latest package, but the minimal version (kxml2-min.zip). I put this file into the directory "%j2mewtk%\apps\KxmlTest\lib" and wrote the lines
    import org.kxml2.io.*;
    import org.xmlpull.v1.*;
    When I try to build the project with the Wireless Toolkit (v1.04) it spits out the following error:
    Error preverifying class kxml2.io.KXmlParser
    Class loading error: Wrong name
    com.sun.kvem.ktools.ExecutionException: Preverifier returned 1
    Build failed
    I also tried the full package "kxml2.zip" but the same error occurs.
    How can I get rid of this? Thanks in advance!

    Okay, finally worked it out (hopefully). I unpacked the archive to a directory (say "%J2MEWTK%\apps\KxmlTest\tmpclasses") and then preverified them "manually":
    %J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.kxml2.io.KXmlParser
    %J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.xmlpull.v1.XmlPullParser
    %J2SDK%\bin\preverify.exe -classpath "%J2MEWTK%\apps\KxmlTest\tmpclasses";"%J2MEWTK%\lib\midpapi.zip" org.xmlpull.v1.XmlPullParserException
    Then I packed them again to a jar-file:
    %J2SDK%\bin\jar.exe -cvf kxml2-min.jar %J2MEWTK%\apps\KxmlTest\tmpclasses\output\.
    That was all!

  • How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

    How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP?  I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

    The new serial number is to the right of your chosen download.

  • Loading Errors-Essbase

    Hi all,
    Please help me with this..
    I got the following errors while load is running in essbase, I have seen this in log files..
    All other cubes loaded successfully, except 1 cube.
    ERROR 1054004 - Application is not loaded
    ERROR - 1002097 - Unable to load database
    The Oracle website shows
    Possible solution for 1st error is Make sure that you created the filters correctly.
    2nd error is not mentioned there.
    Please help me solving this issue.
    Cheers
    Prash

    Hi,
    First of all can you start this database from say EAS, does it say it cannot start?
    It might be a hung esssvr.exe process, stop all the databases and if you still see an esssvr.exe process running you may need to end that process unless you can stop it with maxl or esscmd.
    If you are unsure how to do it then it might be easier to give the box a reboot.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Load error code 11 when attempting to open .vi from library

    Hello,
    Recently a colleague sent me a .llb containing a VI and sub-VIs of a program needed for my research.  The VI opens correctly but none of the sub-VIs can be found by it and when I attempt to open the sub-VIs I get load error code 11: VI version (6.0) cannot be converted to the current Labview verstion (8.5.1) because is has no block diagram. 
    I am running Vista with 8.5.1 and attempting to open a library of version 6.0.  I do not know what OS the library was compiled on.  (Linux is a possibility)  The colleague who sent me the program does not know either, as he recieved it from another colleague whom he is no longer in contact with.
    I am fairly certain the library was saved with block diagrams, so I do not think that is the source of the error.
    Does anyone know what might be a way to get these sub-VIs working?

    Okay,
    File posted.  Someone please tell me if this has a block diagram on it.
    Attachments:
    Find First Error.vi ‏24 KB

  • Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

    Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?

    when I launch Photoshop CC, I get an error message
    and what exactly is the text of that error message?

  • Solution to "Quicktime Plug-in failed to load" error

    My solution to "Plug-in failed to load" error message when attempting to watch demo movie on Apple website (and others):
    I found two Quick-time plugin.plugin files in my Internet Plug-ins folder in my
    User Library folder. One was version 6.3 and one was version 6.5.2.
    Removing the 6.3 version solved the problem. Removing the 6.5.2 version had no effect, so I removed it also.
    Never could have solved this one without the help of Woody at Apple!!!!

    Why not install version 7?

  • Can not update Photoshop CC (2014) and receive error message U43M1D206. What do I do?

    Can not update Photoshop CC (2014) and receive error message U43M1D206. What do I do?

    Bump
    I am also having the same issue with a lot of the softwares i have downloaded. Its unable to download the initial patch update.

  • Stor.e TV+ No Loader error keeps coming up when switching on

    I have been experiencing continual problems accessing the hard drive. "No Loader" error message keeps coming up when switching on.
    The so-called "solution" to this problem posted on this forum is to open up the box and fiddle with the cables. Whilst I have had some success with this method initially, dismantling the box 10 times a week is not on.
    I tried something else in desperation.
    When the No Loader message comes up, I switch the box off and on again from the remote.
    After 2 or 3 times or so the HDD folder usually appears.
    I have been doing this consistently now with great success. This however suggests that the No Loader error message is NOT a mechanical connector problem with the hard drive but (as usual) poor software (what else?).
    Dismantling the unit is tantamount to switching it off for an extended period of time so may explain why this technique works.
    Switching the unit on and off several times also solves the problem of the D folder not appearing on the network even though Win7 shows Store-TV-Plus as a mapped NTFS drive (but can't find the D folder).
    See the similarity?
    Another thing that exacerbates problems is the unit's poor ventilation. The first thing that happens with this unit is that the rubbish stick-on rubber feet fall off.
    Whilst this may seem innocuous, the ventilation slots are underneath the unit and will be blocked if there are no feet. I live in a hot country so this device gets pretty hot and behaves even more erratically unless well ventilated.
    Ideally keep it well away from other units and preferably sit it on a small box by itself with the vents underneath well exposed.
    I also still experience problems playing FLAC and MKV files. The unit occasionally loses synch with FLAC files which generally otherwise play OK and locks up or causes loud bangs or white noise on the speakers (dangerous).
    Some MKV files just don't play at all even though VLC plays them. There are a myriad other inconsistencies but these are the most annoying.
    Is anyone else experiencing these problems or does anyone have any other solutions to prevent these problems?
    I don't suppose we can expect another software upgrade from Toshiba? In your dreams, pal.

    OK, so I took the risk and updated the firmware of my Stor.e TV+ to the Noontec V8S latest firmware V3.0816.13_V8S from noontec website.
    The update went fine without a hitch (took about 2 minutes from an old 256MB flash drive plugged into the back USB port of the unit, which I formatted before using), and some of the irritating shortcomings of the Toshiba firmware was solved. Samba worked in some fashion, but I was still not able to download songs directly to the Stor.e over wireless, which is the only other feature I currently need. The irritating remote control buttons were changed to the way any sane person would use them (I had changed my universal remote control to correct this, so would have to change the settings if I kept the updated firmware) The new firmware seems solid, but I DON'T USE THE VIDEO CAPABLITIES, so I can't comment on this.
    One major drawback of this update for me is that the small display on the unit becomes much less readable. Seems like there is a problem with the font on the new firmware. I use my Stor.e exclusively as a flac music player, and since I don't have it connected to a tv the small display is crucial for me to select tracks or disks. I have 300+ discs, so the Stor.e is an excellent cheap media player which I connect to my HIFI system via a DAC.
    I thus had to change back to the Toshiba firmware to correct this problem. Seems like I would still have to use USB to download music to the Stor.e when I buy new CDs. What a pity.
    Incidentally, the new Toshiba firmware is very much like the old firmware, in that it lacks the capability to switch on Samba. In the readme Toshiba states that the new firmware fixes a network problem, but I think that this is probably the smallest issue most users have with the Toshiba firmware.
    So, my advice to anyone having video, control or other issues with the Toshiba firmware is to flash to the Noontec firmware to see if it resolves their issues. If it doesn't one can always revert to the official Toshiba firmware as I did.
    You do this at your own risk though, if you brick your unit don't blame me...

Maybe you are looking for