Photoshop CS 6 showing as CS 6 Extended after removing malware from my Dell (Win 7).

I have a Dell Dimension 8500 with Win 7. I have been running Photoshop CS6 with no problems.  I recently had to run a number of antimalware programs to get rid of a lot of adware, etc.  Since getting the computer back to normal, when I click on the icon for CS6, it starts up as CS 6 EXtended and brings up the window about the 30 day trial.  How did this suddenly happen?  I never downloaded or purchase CS 6 Extended.  When I look in the programs directory, it says Extended when it never did before.  Must I delete the entire program and reinstall from the original install files?   How do I preserve my homemade presets and other plug-ins?   Thank you.    BruceB

There is only one perpetual Photoshop.exe 64bit  and one Photoshop.exe 32bit  when activated they are  either CS6 standard or CS6 extended it depends what you serial number is.  If its not activated is runs as a trial install CS6 extended for 30 days. See if you can use menu Help>Activate to activate you install.  Its acting like you activation credentials have been deactivated or wiped.

Similar Messages

  • DSC-WX350 shows leftover "Unable to Display" after removing photos from card

    I'm having a problem with the DSC-WX350 seeing "ghosts" of photos after they've been removed to a computer. If I pop the camera's card out, stick it in a card reader, and move photos off the camera onto my computer, once I put the card back in the WX350 seems to see false files of the relocated photos: it acts like they're still there (info, date taken, keeps them in the photo count, etc.) but only shows a grey "Unable to Display" error. I then have to manually delete each erroneous entry manually. As you can imagine, doing so every time I move photos off the camera is a pain in the ******. I've looked through all the folders on the card and don't see anywhere that any leftover file markers or anything else to cause this issue would be. Any ideas why this is happening? (FYI, the card was freshly formatted properly prior to using it in the camera.) Thanks ahead of time.

    Bob, I do not think you understand, or didn't read my post. I am not interested in recovering photos, because I already transferred them to my computer, and used the program in the computer to delete the photos I just transferred. After this is done, I put the SD card back in the WX350, and the Unable to Display message comes up when trying to view other photos just taken. This never happens when using my RX100M2.  I think the reason is the firmware written for the bionz X processor has a flaw in it, which is too bad because Sony never releases firmware updates for cameras unless they cost a bazillon dollars. The WX350 is not the only Sony camera to have this issue, it happens with others using the latest processor. The only way around this is to reformat the SD card each time I transfer photos to my computer using non Sony software, which is a royal PIA if I do not want to delete everything on the SD card. Are you guys too proud to come up with firmware updates? Issuing firmware updates is not something to be ashamed of, it shows you care about your customers.  David

  • I bought the student and teacher version of CS5 extended for windows. Can I download the Mac version to my new  apple computer  and use the same serial number after removing phtoshop from my PC?

    i bought the student and teacher version of CS5 extended for windows. Can I download the Mac version to my new  apple computer  and use the same serial number after removing phtoshop from my PC?

    Can I download the Mac version to my new  apple computer  and use the same serial number after removing phtoshop from my PC?
    Short answer: not for CS5.
    Platform swaps are available but only for CS6
    Order product | Platform, language swap

  • Scanner not showing up in CS5 Extended after installing Illustrator 6

    I have been working with Photoshop CS 5 Extended without any problem. I installed the TWAIN driver for it and when I go to FILE ---- IMPORT My scanner would show up and I could scan right ionto photoshop. That's how I like to do it.
    I installed Illustrator 6 the other day, and when I went to scan something into Phostoshop CS 5 today, I noticed that my scanner was not in the FILE ------- Import menu. I can see that the TWAIN file is where it's supposed to be in the plug-ins - Import Export folder.
    Why is it not showing up in my Photoshop FILE ---- IMPRT menu?
    Is it because I have CS5 and Illustrator 6?
    Is it a 64-bit mode --- 32 bit Mode thing? I tried to switch it to 32 bit mode, but there is no choice for it under the GET INFO menu.
    Please help me find a way so I can scan directly into Photoshop CS 5 again using my FILE -- IMPORT menu button.
    Thanks in Advance

    Some more info is needed and it wouldn't hurt if we saw install logs.
    Mylenium

  • Songs don't show up on my iPad after applying them from iTunes. Help?

    I plug my iPad 2 into the computer and iTunes automatically comes up. When I go to apply a new playlist from iTunes to my iPad, it looks like it finishes loading and then it shows that I should have 181 songs on my iPad but i only see that I 31 songs. What should I do? or What is going on? I haven't changed any settings on either my iPad nor my computer.

    Are you selecting the playlist like this
    Connect the iPad to the PC and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Music Tab on the right.
    Click on all of the albums or playlists that you want to sync
    Click on the Sync Music Heading.
    Click on Apply in the lower right corner of iTunes

  • Why isn't my portrait page numbering showing up on landscape pages after creating PDF from Word?

    I have a lengthy Word document that has portrait and landscape oriented sections. The landscape sections have page numbering set up so that on screen it appears on the left, but in the printed book will have the page numbers in the same place as the portrait pages. For some reason when I create a PDF using the Adobe tab in Word and embed the fonts though, the portrait page numbers on my landscape pages do not show up. Does anyone know if there's a box or something I'm not checking?
    I'm using Microsoft 2010. Let me know if any other details are needed!

    Hi Liz,
    Can you share the file with me at [email protected] so that I can have a look.
    Regards,
    Anoop

  • Why don't my photos show up on card reader after an export from iPhoto?

    Just exported 78 photos from iPhoto to a memory card reader. After completing the export, I returned the memory card to my camera.The photos don't show up. What could have gone wrong?

    The format and arrangement of folders on your camera card is quite specific, and unless you've export the photos to exactly the right folder, name din exactly the right way, it won't know they are there.
    Format the card with your camera. Take a snap. Pop the card in the Reader. Find that snap... that's the folder your photos should go to.
    Regards
    TD

  • I have the photoshop elements 12. where is the rectangel marquee to remove things from a picture?

    I have photshop elements 12.  Where is the rectangle marquee to remove things from the picture?

    This one perhaps:

  • Printers are showing twice in Devices & Printers after removal

    Hi Experts,
    The following problem started a few weeks ago on 1 of our 3 RDS servers. I hope that there is someone that knows how to resolve this problem.
    The server is: Windows Server 2012 Standard
    When I delete a printer from the Devices & Printers this printer appears once more after a few minutes.
    It happens with every printer I remove.
    With kind regards,
    Rense

    Hi Rense,
    Please refer to following KB and check if that Hotfix will help you to solve this issue.
    A network printer is deleted unexpectedly in Windows
    If this issue still exist, please check event log if find some relevant clues.
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Is Copy Paste Pans & Zooms Possible in Photoshop Elements Slide Show Editor Slideshow?

    In the Photoshop Elements Slide Show Editor, someone wants to create a unique pan and zoom effect for one photo and be able to apply it the the rest of the photos in the Filmstrip without having to do that on an individual photo basis.
    In the Slide Show Editor, Edit Menu/Apply Pan & Zoom to All Slides or Apply Pan & Zoom to Selected Slide(s) does not get the job done. Instead it looks like it just applies the default Photoshop Elements pan and zoom. I have investigated several routes to the goal unsuccesful and have concluded that Photoshop Elements Slide Show Editor offers no such copy paste pans & zoom feature.
    I have detailed how to add more than one pan & zoom per slide, how to get the pan & zoom copy/paste job done in Premiere Elements, either doing all the pan & zoom in Premiere Elements or creating the pan & zoom in Photoshop Elements for one slide, using Send to Premiere Elements, Break Apart Adobe Photoshop Elements Slideshow, copy/paste of the transferred pan & zoom. Believe it or not, that does work. I know that there will be skeptics who feel that the pan & zoom timing would be distored, but....This person does not have or want Premiere Elements in the equation. So, I am looking for a way out for her.
    I am posting the question here for someone to confirm my conclusion or offer a way that has escaped me. If someone has found a way, he/she will be fully created for the contribution and thanked.
    ATR

    Copy and past funtionaliy is not available  in pan & zoom feature. Please do a feature request.

  • Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?

    Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?

    I answered my own question: There's a difference between "download' and "install." Hunt for "install" (1.5 hrs in my case) and line up your passwords, Adobe ID, etc, then install. Took 15 min. The right choice shows up in Applications. Now it's on to figuring out why photo selected for edit in iPhoto does not show up on screen in Elements.

  • The box in my Photoshop Elements, which shows the size and types of brushes has shrunk to one unreadable line. How do I expand the box to its original size?  I have tried dragging it open but nothing moves.

    The box in my Photoshop Elements, which shows the size and type of brushes, has shrunk to one unreadable line. How can I expand this box to its original size? I have tried dragging it open but nothing happens and none of the tool boxes appear to give me an expansion option

    Well, when you open the program, the splash screen, the window you see while the program is opening, should make that clear enough. For example:

  • Photoshop is not showing up in my available programs list.

    Ever since I switched over to The Cloud I have noticed when trying to open with my photoshop is not showing up on the list or the sub lists, when I try to open it under adobe I cannot find the ext file to link it with .. the program seems to be working other than that...
    Respectfully,
    Terry Loomis

    Hello! I will guess that you are using a PC (I guess that by "list" you mean the Start menu)
    Usually, Adobe software are listed under their Creative Suite folders, you can try to look if there is a creative cloud. Also, a search for Photoshop.exe should let you see where it is located, and you should then be able to add a shortcut to your start menu.
    You did not tell either what version of windows you are using, so here are instructions for 7: http://www.sevenforums.com/tutorials/296-start-menu-all-programs-add-delete-shortcuts.html
    To get quick answers and relevant to your question, remember to give pertinent information, such as your operating system, your version of Photoshop.

  • Photoshop CS5 not showing up in DWCS4

    OK So I had both DW and PS CS4 all was well photoshop icon was showing in images property inspector and double clicking an image would open it in photoshop. Then I upgraded to PS CS5 and DW would still open images in PS CS4 not the new PS CS5. So I figured if I removed PS CS4 it would work but I only got an error message saying it couldn't find PS CS4. I then called adobe support and after an hour on the phone with them they finally said try and uninstall and re install DW. Well I did that and still it doesn't work and I can't find the old PS CS4 to reinstall it so at this point there is absolutely no integration of DW with PS.

    after all that I figured it out myself. In preference there is a file type editor section were you can pick which program to use when you want to edit specific file types. I obviously picked PS CS5 for .gif .jpg and .psd Now the PS icon is back and double clicking opens the image in PS CS5

  • How do I get Adobe  Photoshop CS to show my Epson 3200 Scanner  in the list under File Import?

    How do I get Adobe  Photoshop CS to show my Epson 3200 Scanner  in the list under File Import?

    That will depend on installing a proper driver for the scanner that is compatible with the respective version of PS. But if you really mean a 12 year old PS CS1, it will be nigh on impossible to get this working with a brandnew scanner... Anyway, you wil lhave to provide more info about your system and clarify the points in question.
    Mylenium

Maybe you are looking for