Photoshop CS and Image Ready.

Is there a way to activate Photoshop CS and Image Ready?

Already answered here:
https://forums.adobe.com/thread/1585290

Similar Messages

Animated .gif file correction and image ready help.

Hi,
I have an animated gif created in an early verison of Image Ready & Photoshop. I need to make some changes. I have two problems.
A: Can't figure how to do it in the current version of Photoshop.
B: Open in the old image ready version, can't find the Layers pallet. I turn it on and off and it doesn't appear.
Trying to recreate a rotating .gif file any pointers or how to's?
Thanks,
John

You didn't say which version of ImageReady, but cs5 should open
most animated gifs from ImageReady and show the frames in the
Window>Animation panel. Some may not work right depending on
how old the version of ImageReady was that created them.
(you may have to resave the animation in ImageReady as a psd file)
In ImageReady try Window>Workspace>Reset Palette Locations and the layers
palette should be visible.
In ImageReady, in the actions palette, are several actions to rotate (spin) images.
MTSTUNER

Gifs and Image Ready - CS4

Hello there,
I am user of Photoshop CS4!
And I recently tryed to open an animated gif File.
Photoshop tells me it can´t open all frames.
And this is where the Problem is.
Fortunatly, i have CS2 on a seperate computer aswell.
So I decided to open that very same gif File in Imageready, and then put it back into Photoshop.
What a suprise those frames are back!
WOW! But whats wrong with CS4? Can´t I do this with CS4?
There must be a way to get the Job done without using another old computer with old software on it.
Like adding the extract Filter in CS4 from CS3 just by placing a little file in the presets folder. ;-)
I´ll be realy happy if you have any suggestions.
Regeards,
Type

This is a feature request forum, not a help forum.
You can find your answer in this thread: http://forums.adobe.com/thread/374634?tstart=120

How Do I Change an Animated Gif's Iteration and Loop Settings? (Pshop/Image Ready 7.0)

Background to Issue (NOT a PPT or Windows issue even though It will seem like that at first but read on...): I have to make Animated GIFS to be inserted into Powerpoint. I work on a Mac but the PPT presentation will be shown on PCs (non-negotiable, since I can't ask hundreds of sales reps who will be using this to install an outdated version of PPT). I already learned that I need to insert the Gifs while working on a PC or else it won't work). Fair enough- I can put it together on a PC, again not the issue. BUT, when I do THAT, the gifs still wn't animate unless I am in PPT 2002. Fair enough (Microsif going backwards not a surprise) So it won't work in PPT 2003 which is what the users will all have. But I need to get the presentation to them asap! I got a bit further in researching and found out that the solution is that I need to set my "Loop Flag" and "Iteration Settings" appropriately. See this link (http://www.soniacoleman.com/Tutorials/PowerPoint/animated_gifs/gifs.htm)
BUT I am trying to find out if one can do this already somehow in Mac Photoshop 7.0 or Mac Image Ready 7.0, where I made the gif and would prefer to keep making my gifs. Maybe I need to upgrade Image Ready or Pshop to CS? SO THE FINAL QUESTION IS: Is there another way to manual do this without this PC Plug-in?
NOTE: Yes, I know how how to set the loop to "once" or "forever" in Image Ready when I make my Gifs but apparently I need to do this somewhere else...where the iteration setting lives too?

There is an ImageAnimator so you may not need to use byte array instead.
ImageAnimator.Animate Method
http://msdn.microsoft.com/en-us/library/system.drawing.imageanimator.animate(v=vs.110).aspx
chanmm
chanmm

Hi All image ready issue on an old photoshop 7 program

I am using photoshop 7 I know its an oldie but it works for me,whenever I try to jump to image ready I get the message could not fully start the application because an unknown error has ocurred,
I have been using the programs for some consideral time and never had any problems, until now. I have all the original discs packaging and key codes..... I have uninstalled and re installed I have plenty of memory but IR just wont open, Im sure this happened after an adobe update I cannot understand why if photoshop 7 continues to work fine and which is compatable with IR7 and came with the package just wont fire up. any ideas?

This forum deals with Adobe Digital Editions, not Photoshop....
===========

My Adobe Photoshop 6 Disappeared off my computer leaving only Image Ready. Now my disk will not work. I have the Auth key..where can I find a copy to download?

My Adobe Photoshop 6 Disappeared off my computer leaving only Image Ready. Now my disk will not work. I have the Auth key..where can I find a copy to download?

Sorry I would not know how to score a copy of the Program disc. I would not even trust it if I did.
Photoshop is one of the most pirated software out there and in cases loaded with malware.
Ok then, create a admin account on XP, log in and try running the cd there.
Check this thread if you need more details,
Photoshop 6.0: Installs On Vista But Won't Install On Xp - All Other Applications
Gene

Getting photoshop cs4 to work like image ready cs2 did for web - help :)

maybe one day i'll be able to come on here and give someone some help
ok im pretty new to using cs4 photoshop and i was quite comfortable in using cs2 with the swith over to image ready when doing slices and rollovers etc,
i have seen various people saying that image ready is no longer, i was just wondering if someone could give me a dummies guide to doing the same tricks on cs4
im looking to make slices, i can see the slices tool but i cant see how you go about doing rollovers and what not for links, im a beginner in doing web sites so im not into the coding yet
what i would normally have done in cs2 is -
do my web page layouts, everything except content,
do my links and rollovers on every page of my site then transfer over to dreamweaver, adding all my website content and linking the pages together
can anyone please help
thank you so much in advance
P

I don't do it that way but this might "Help"

I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image,

I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image, the guidelines are not locked, it is annoying to have to lock them down again. and it would actually be nice, to ba able to give specific directions when placing the guidelines. Thanks

Then why are the guides unlocked when I reopen a document that I saved with the guides locked ?
Thanks.

Opening any image in Photoshop desaturates and darkens it

Hello!
For approx the last 2 months whilst using photoshop CS5 (which I have been since purchasing in Dec 11 without issues), I'll process and images as a TIFF or high res JPEG with an Adobe RGB 1998 colour profile in Lightroom 3 or Capture Pro 7, then open in Photoshop with a working space and proof preview space of Adobe RGB 1998 and the image appears darker. I can correct it by adding a saturation layer, (+28 sat) a curves layer (+ 10% brightness) and a contrast layer (-15 contrast). I then save the image and open it again in bridge or lightroom an, whether I flattened it or not, the image then opens in all other programs with the same issues that photoshop gave it, i.e. darker, more contrasty and less saturation. My workaround has been to open all in bridge, then open in photoshop from here for all my retouch work, then open in lightroom and fix the colour/curves/sat problems. Not an ideal work around and incredibly time consuming! Help!!
This of course also affects my images when I open the high res through bridge as processed through Capture or Lightroom then use Bridge Image Processor to export all as low res adobe 1998 - they all come out darker etc.
I'm running the programs on a Macbook Pro 2009 model, vs 10.8.4, and my screen is calibrated regularly.
Thanks,
Jess

Sounds like you did not use Adobe RGB as the target spec for your monitor calibration, but instead a custom RGB setup based on a 6500k whitepoint or something like that. Could also be a bad profile. In any case, before spending endless hours trying to chase phantoms, it would be best to reset your monitor and color settings to factory default, then create a new calibration from scratch.
Mylenium

I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the "double click" defult to o

I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the default to open an image with a double click in 4?

You can associate files from the Bridge level and the Desktop level.
In Bridge CS4, go to Preferences > File Type Associations and change it to Photoshop CS4 for the file types you want.
If you want to open files from the Windows Desktop in CS4, these are the instructions:
Do this from the Windows Desktop:
If you want your image file to open in Photoshop and it doesn't, right click on it and choose
Open with > Choose default program… select Photoshop CS4 or CS6 and checkmark "always use the selected program to open this type of file".

I have Photoshop CS5 and am trying to download the Camera Raw plug in which will enable me to look at RAW images from a Nikon D800 . The download appears in my " Downloads " folder but when I try to open a RAW image I get a message up which says it can't

I have Photoshop CS5 and am trying to download the Camera Raw Plug in that will allow me to open images taken with a D800 camera .
It appears the download has been successful when I look in my " Downloads " Folder but I still get a message up saying the installed version of Camera RAW won't support the Camera model ( i.e. D800 ) . What am I missing ??
Tony Fletcher

You need to download and install Camera Raw 6.7.1 for CS5. Once you have downloaded it, you need to install it while CS5 is closed.
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Once downloaded, unzip/unpack the file, and run the executable to start the update, following the instructions.

Using Lightroom 5.5 and Photoshop CC2014. Images no longer open in Photoshop when using "edit in" command. Photoshop opens but no image when trying to move between LR and PS. Any suggestions?

Using Lightroom 5.5 and Photoshop CC2014. Images no longer open in Photoshop when using "edit in" command. Photoshop opens but no image when trying to move between LR and PS. Any suggestions?

1. You have allowed Apple to auto-upgrade your Mac
Turn off auto-update here:
Menu > Apple > System Preferences > App Store
2. The Icons on your dock are Aliases not real apps
They point to where the apps really are which is:
For Pages 5.2.2 in your Applications folder
For Pages '09 in your Applications/iWork folder
3. You are alternately opening documents randomly with either version of Pages
Both Pages have the same file extension .pages and there is no certainty as to which version opens them when you double click on a file.
right click on the file and choose which version you want to open it
4. Pages '09 can not open Pages 5 files
Pages 5 can not open Pages '08 files, and will convert and change Pages '09 and Word files.
It will also auto save opened files into its own format.
You can export these back to Pages '09 if you need to:
Menu > File > Export > Pages '09
5. Yes Pages 5.2.2 is a marked downgrade
Pages 5.2.2 has a few improvements but has had over 110 features removed and is buggy.
Sooner or later you will not be able to open a file or have it damaged in some way and it has a complex obscure file format largely incompatible with everything else, so you will not be able to rescue the contents of your file. If Pages or some third party server/eMail don't trash your file, eventually Apple will do it for you as it did when it released Pages 5 last September. I recommend using Pages '09 for the time being whilst you look for viable alternatives, some are here already and some are on the way.
For further information about what has happened:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=0882463378700 abf43a0f2433506bbbc&mforum=iworktipsntrick
Peter

My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images

Any ideas?

My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images from Lightroom and choosing the "Render using Lightroom option when it popped up in the dialogue box. She has been doing this for over a year and a half without any problem. Today when she hit Command E no dialogue box appeared and the image just opened in Photoshop. I'm concerned that all of her Lightroom edits are not being rendered to Photoshop. Anyone have an idea as to how we can get the "Render using Lightroom" dialogue back?

I own a Canon 6D and just bought Photoshop CS6 and I am not able to open my raw images into Photoshop CS6. What do I do to fix this?

I own a Canon 6D and just bought Photoshop CS6 and I am not able to open my raw images into Photoshop CS6. I downloaded the camera raw and dng converter for it, but realized in the process that the one I downloaded does not work with my Mac version, 10.9.5.

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Mylenium

I have Photoshop CS5 and my image processor and batch tool are gone. How do I get them back?

I have Photoshop CS5 and my image processor and batch tool are gone. How do I get them back?
I went into edit preference and all the start up scrips are selected so what else is there?

When you installed CS5, you have a chance to register it. If you do, your serial number is on file under your Adobe (My Products). If you did not, you have no serial number on file and even worse, no proof you own it.
You do not have your serial number copied down anywhere? Hard to believe you tossed the dvd box and all the documents away.
So Help > Register might give you a chance to do this without you knowing the number.
If not, you may want to consider the Photography Plan. Creative Cloud Photography plan | Adobe Creative Cloud

Photoshop CS and Image Ready.

Similar Messages

Maybe you are looking for