Photoshop cs2 disc will not install

I had Photoshop CS2 installed on my old iMac, which recently crashed, so I purchased a new MacBook Pro. I used Time Machine to transfer all my data from my 2006 iMac to my new MacBook Pro. Transfer of data was successful, except for Photoshop CS2, which was "X-ed" out and would not load when selected. So I took out my purchased Photoshop CS2 disc (which I bought new and still have the receipt for) and attempted to re-install, but with no luck. I removed all previous PS files like several forums recommended and attempted several more times to install PS via disc, but again, no luck. The Message I get is "The installation failed. The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance." So I am contacting you for guidance on how to resolve this issue. I understand PS CS2 is no longer supported (I even downloaded the file from you site to install PS CS2 https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2%5Fdownloads but this was also unsuccessful), but I sure could use your help. Thank you.

CS2 will only work on old PowerPC Macs. It isn't compatible with the Intel processor in new Macs. There is nothing you can do I'm afraid.

Similar Messages

Adobe Photoshop Elements 13 will not install on my desktop computer. It does install on my laptop. Both computers are running Windows 8.1 64 bit Pro. What is the solution?

Adobe Photoshop Elements 13 will not install on my desktop computer. It does install on my laptop. Both computers are running Windows 8.1 64 bit Pro. What is the solution?

why won't it install? ie, do you see an error message?
if you have no idea, check the installation logs - Troubleshoot with install logs | CS5, CS5.5, CS6, CC

Photoshop Elements 9 will not install.

I have installed Photoshop Elements 9 several times, and it does not complete installation. It loads about 80% of the files, then at the point of placing an desktop icon, the softwarw rollback. My operating system is Windows 7 64 Ultimate. My computer system includes AMD Phenom II X4 810, 8 GB RAM, GeForce NVIDIA 9600 GT (IRQ 18) and GeForce NVIDIA 8400 GS (IRQ 19). I tried to disconnect the second graphics card - no help. I have manually removed Photoshop Elements 9 from the registry and reinstalled - no help. The error status is 1603. When installing, I closed all Adobe software, anti-virus software, and Windows Firewall. I contacted Adobe customer service several times - no help.

Hello Mylenium, I tried everything in the Error 1603 | Install site that you sent me. And, still the installation of the PhotoShop Elements 9 rollback and will not install. What is next? Thank you, Paul
Date: Tue, 1 Jan 2013 03:30:11 -0700
From: [email protected]
To: [email protected]
Subject: Photoshop Elements 9 will not install.
    Re: Photoshop Elements 9 will not install.
    created by Mylenium in Downloading, Installing, Setting Up - View the full discussion
Check this, perhaps it may give you some ideas: Error 1603 | Install Mylenium
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4960042#4960042
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4960042#4960042
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4960042#4960042. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT3415 Ive formatted my iMac and now the applications disc will not install on my computer

Ive formatted my iMac as I am selling it on and now the applications disc will not install on my computer.

Isaac, Two knowledge base articles that may be of further help are:
Reinstalling Mac OS X 10.6http://support.apple.com/kb/PH6606
and Reinstalling Application Software that came with Mac OS X 10.6
Be sure to read them through if you have any further problems.
Regards,
Ralph

Photoshop downloaded, but will not install. I've turned off firewall, but install is frozen. What to do next. Error code 6...? Say I need to download 64 bit version of photoshop.

DOwnloaded PS13. Will not install. Freezes at 2 percent. Error code 6. Says I need to download 64 bit version. What do you suggest next. I'm not computer literate.

Download 64 bit version of photoshop elementes 13 from below link and try to install it'
Download Photoshop Elements products | 13, 12, 11, 10

My hp officejet 6310 all in one disc will not install

had some trouble and uninstalled my software in trying to reinstall but when i put my dice in nothing happens i am able to print and send a fax but it wont scan or recieve a fax

Hello @mac1950 , and welcome to the HP Forums, I hope you enjoy your experience!
I understand your printer will not install. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Photoshop Elements 11 will not install. It says "Error 2343. Specified Path is Empty." Can U Help?

I purchased & downloaded Photoshop Elements 11. I installed it. Informed me some parts were missing, so I needed to uninstall it & reinstall it. I went to Programs & Features in Windows 7, & did just that. Then it informs me that it could not uninstall it properly. To try again. The program is missing now from Programs & Features. Can't find it anywhere where I can uninstall it. So, I went to Adobe to get it to uninstall. I keep getting this error; "Error 234. Specified Path is Empty" I have done everything! Cannot get it to install or uninstall. The Organizer is opening, but the Editor will not. I can't get anything to print. I have a deadline tomorrow and I cannot get any pictures to print. What am I gonna do? Can anyone please help me?

If you haven't committed to PSE12, yet, then you should be able to download PSE/PRE11 from this website. Be sure to follow the Very Important Instructions to set the Adobe authorization cookie, because the downloads actually come from Adobe:
http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l

Photoshop 5.5 will not install

HD suffered a glitch. replaced it with a new HD and reinstalled all programs from original CD and diskettes.
All programs installed well except Photoshop 5.5. When the CD is inserted the auto run screen comes on and when clicking in install Photoshop 5.5 the CD turns but does not install. It will install all other programs (Quicktime 3.0 , Post Script 5.1, Adobe Acrobat Reader 4.0)on the CD. OS is Win XP Pro SP3. CPU AMD Athlone XP.
This old Photoshop 5.5 is enough for my needs. How can I get it to install. Any help would be very much appreciated.
OldPSuser

Rob.
Thanks for your help I did just that copied the Photoshop Folder and its contents to the hard disk and then opened the folder and launched the setup file and it worked.
However, before starting the installation it displayed an error window (17 times in sequence) telling me that an unistall file had been detected. Error 431. Just clicked the OK on each error window and they disappeared when the last one went away the installetion started and proceeded to install the program without any more problems.
Didn't even have to disable the security software.
Thanks again.
Alfredo

XPsp2 disc will not install-ejects

Boot camp partition process works fine. When install disk is inserted, optical drive starts up, screen flickers to black, then music and grey screen, then disk ejects hanging machine in grey screen. Manual shut down and restart comes up w black screen and message "no bootable disk". Another manual restart w option key to select MAC HD as boot drive and then reselect in System Pref and everything is fine. Happens every time with two different install discs.
XP disk is "Student Media/Work at Home Media" purchased thru the University. Other is "Systems Student Media".
Two calls to support, no help. One guy said "we don't work with that call XP".
Genius bar verified disks were correct and that optical drive and hard drive were functioning "perfectly". Tech said either its' the disk or the operating software and it was not the disk. Said I should reinstall Leopard (Not an upgrade-machine came with it. After consultation said to reinstall just BootCamp. They would not look at the console messages and said they weren't trained in that.
Looked at reinstalling BOOT Camp, but it does not seem to appear as a stand alone on the Leopard Install and did not come up in Applications install, just mail, safari etc.
Console messages show boot camp, then log in window starting security agent, then authorization host invoking mechanism, then security agent invoking mechanism then "security agent[80]: Mechanism Destroy".
I have to believe that this is the problem and am looking at repairing permissions, but from these forums am scratching my head a little about that. Would like to have a better idea of what to do. The IT guys here are few and far between and the medical group cannot support mac anyway. Love the machine, a little disappointed in Apple's responses so far and wonder if any of you might have some advice for an old windows guy who would really like to be converted. Just need it for the business connection with exchange. I promise I will not run it for anything else. Other idea is to go buy Parallels or a commercial XPsp2, but those are shots in the dark at this point. Does sound like a security issue, but don't know for sure what to do.
Thanks for your patience.

The seller may have given you the wrong discs if you have Tiger restore discs. The model number of MacBook you mention (MB062LL/B) came with Leopard and not Tiger. See here: http://support.apple.com/kb/SP12
You need to reinstall by using the Leopard install discs that originally shipped with this Mac. 10.5.0 on your Family Pack DVD is older than what came preinstalled on the MacBook. No Mac computer can run an older OS than what originally shipped with it. Apple has a tech note about this here: http://support.apple.com/kb/HT2186
Message was edited by: Király

Photoshop elements 11 will not install imac

Seems to download from Adobe online, but will not open and install.

What happens when you try? Is there an invalid checksum error or anything like that?

Adobe photoshop 5.0 will not install

Hi i have my old version of Adobe photoshop 5.0 LE "limited edition" but when i insert my cd my computer which is win 7 home premium, tell me my computer does not support this instalation and i do have 64 bit operating system.
i cant seem to follow any advice from related topics to this because my first step is to get the cd installed.
so please any one willing to help me please let me know :O)

ok thanks for a straight answer i knew i should of stuck with xp, i have ventured to win 7 and have nothing but updates and other companys asking for money for new versions all my software due to microsoft, i wish they advertise on tv that it would copst us actually more to buy a new laptop. not sure im going to bother with win 8.
yeah i downloaded elements 7 as a trial im still deciding between 3 others at the moment.
But thanks Jeff for answering me
regards
lee

Adobe Photoshop Elements 9 will not install - rollback action issue?

Im having problems installing Adobe Photoshop Elements 9.
The problem is right at the end of installation, it says status is registering and then immediately does an action rollback.
The message "The wizard was interrupted before Adobe Photoshop Elements 9 could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again."
I am beyond frustrated as I have tried installing even as an administrator and Im assuming there is nothing wrong with the CD just my computer being a complete pain.
If anyone can offer some help that would be greatly appreciated.
Holly.

Hi Holly
I have the same problem with the rolling back installation. Could you tell me what Ankush advised you to do to solve it.
Sorry to bother you but I seem to be hitting a brick wall elsewhere.
Thank you in anticipation.
Davemanton

Photoshop Elements 11 will not install.

I have downloaded and extracted all 3 files, but when I double-click on the .exe file, it does nothing. The cursor does even change to the spinning thing that tells me it is working on something. Please help me.

I'm not sure what all you need to know. I went to the Wacom Intuos welcome site and registered my tablet, and then I chose to download Photoshop Elements 11 as one of my free software choices. I extracted the file as instructed. The folder was on my desktop. I double-clicked on the ".exe" file which was supposed to install the program, but the cursor did not even change to it's "thinking" icon--spinning wheel or sand clock. I have Windows Vista on my computer. I use Chrome for my browser (such as when I downloaded the file).

Photoshop Elements 12 will not install on Win 8 - fails at "Shared Technologies"

New Lenovo computer with Windows 8.1. Installed Photoshop Premiere Elements 12 w/o a problem.
Tried to install Photoshop Elements 12--all went well until it reached "Shared Technologies" and quit the intallation. Troubleshooting info was usless to me. Not proficient in entering all the codes required. Is there an easier way?
Any help would be greatly appreciated.

Slats 48 please see http://forums.adobe.com/message/5469931#5469931 where this topic has been discussed.

Just formatted my mac but iLife (from original disc) will not install

hi all!
I've done a routine format of my Macbook Pro 13" a couple of weeks ago, it all went well but I seem not to be able to install the bundled applications from the orignal, grey cd that came with my mac.
I insert the cd, start the procedure then just after keying in my admin password the insatllation stops...i.e. it fails to start.
As new, my machine runs OSX 10.6.6 but I've already upgraded to 6.8 ... I've tried to install iLife before and after upgrading.
I've been to an Apple Store — since my laptop is less than a year old — but they say warranty doesn't cover software...in any case, I've also tried to install an iPhoto downloaded from the internet, but with the same results, so I'm thinking it might not be a corrupt disc...
Any idea other than re-formatting the machine?
thanks!
dani

Erase and install 10.6 again, but this time use the Security Option > Zero All Data on the drive, you have bad sectors.
Reducing bad sectors effect on hard drives
How to erase and install Snow Leopard 10.6
If that doesn't work, then your cd is bad. clean it and try again or try extracting iLife using Pacifist. (but you need your bad sector issue resolved)
Also run through this list and get back with me, I doubt anything else is a problem on a fresh install, but there might be.
Step by Step to fix your Mac

Photoshop cs2 disc will not install

Similar Messages

Maybe you are looking for