Photoshop cs3 and cs4 brush lag /snow leopard 10.6.6

Having occasional brush lag using these apps. Not due to wacom, does same with mouse. Discussions going on at adobe forums. I have ATI 5770 in mac pro 2.8 quad. Don't want to update to 10.6.7 due to font/pdf issues. Spoke to apple person, who couldn't say if the new update had specific fixes for graphics drivers. Anyone having same problems?

?Did you have a PowerMac before, and did you use the Migration Assistant?
How about some normal good system maintenance?
CS3 on a Mac Pro running SL may or may not work the best on mid-2010 Mac Pro.
Your mac by default was set to boot into 64-bit kernel mode. I assume you switched to 32-bit.
How about RAM and storage setup? disabled Spotlight and moved primary scratch to non-system drive?
To elimiate any confusion, change the "PowerMac" to what you have, a Mid-2010.

Similar Messages

Adobe CS3 and CS4 updater under Snow Leopard issues

Hey everyone -Ive been trying to research this and I have CS4 and CS3 (just photoshop installed) under snow leopard -(clean install) and when I launch the adobe updater on CS3 it just crashes-and on CS4 the updater runs but finds no updates and I know they are out there.
This is all I could find on Adobes Forumns
http://forums.adobe.com/message/2349031#2349031
They talk about changing the permissions of the admin group but you have to be careful or you will mess your machine up -I dont wanna do that.
Is anyone having this problem? Or can anyone help
Matt

You might try creating another user account (testUser) and seeing if those installers will function properly there, under a clean account...

Screen Flickering in Adobe Photoshop CS3 and CS4

I experience screen flickering in Adobe Photoshop CS3 and CS4 when I move my mouse around on the screen. Basically any mouse movement will create flickering. The more and faster I move my mouse the more flickering occurs.
System Specs
- Windows 7 64bit Ultimate
- Intel i7 3.2GHz Extreme
- ASUS Rampage II Extreme Mobo
- Corsair Dominator 6GB 1866MHz (Triple Channel)
- Dual eVGA Nvidia GTX 285 Superclocked Graphics Cards in SLI
- Dual 60GB OCZ Vertex Series SDDs in RAID0
- Corsair 1000Watt PSU
- CPU and both GPUs are water cooled
- Logitech G-15 Keyboard
- Logitech G-9 Mouse
- ASUS 26" LCD VK266H monitor (1920x1200 @ 60Hz) DVI
- I have the latest BIOS and all of the most up-to-date drivers installed for every piece of hardware.
I have photoshop set to use the maximum allowable amount of memory. The memory slider in photoshop maxes out at 3.25GB which equates to about 50% of my total system memory.
The screen flickering does not occur in any other application or game, only in Photoshop. I have tried every possible Nvidia Control Panel setting for this application, and nothing seems to have an effect on the flicker.
Does anyone have a solution to this problem, or any recommendations?

Aside from the potential SLI issue, you might want to study your Logitech mouse driver.
Going back a bit, several versions of the MS InteliPoint mouse driver caused just what you describe. I have not heard of this with Logitech, but did have some other issues with their SetPoint drivers. In my case, I ditched their keyboard, but kept the mouse (love it), and did away with SetPoint, using the generic driver. All functions that I needed were handled, and SetPoint was out of the equation.
Something else to look at, and good luck,
Hunt

How to open Camera RAW (CR2) files in Photoshop CS3 and CS4? (Mac)

I have a Canon 7D. I prefer to shoot in raw format, but the CR2 files cannot be opened by either Photoshop CS3 on my Mac in the office OR by Photoshop CS4 on my iMac at home.
I have tried dowloading the Adobe DNG Coverter and Camera Raw 4.6 update (which is SUPPOSEDLY intended to work for CS3) and followed the instructions to replace the plug-in. STILL a no-go. CS3 STILL tells me "Could not complete your request because Photoshop does not recognize this type of file."
What gives? Does anyone know of a way to get CR2 files to open in Photoshop CS3 or CS4? (A way that actually works?) Because Adobe's plug-in update doesn't seem to do it, and Canon's "fine-grain" editing controls for raw images is pretty lack-luster.
Thanks (in advance)!

Have you tried opening up out of Bridge? If that doesn't work you may new need to download a new driver from Canon. All my peripherals are Canon and I am always having to download new drivers everytime I update. Fortunatly they are really easy to find on Canon's site.

Dark Prints with Photoshop CS3 and CS4 but not Lightroom

Hi, To start,I have calibrated my dell monitor with eye-one pro as well as my epson 7800. i am running vista 64 bit on my PC...
When i use photoshop (CS3 or CS4) the images look fine on the screen and come out really dark on the printer. When i use lightroom, the images look fine on the screen and fine on the printer.
Any guidance on how to "fix" photoshop would be appreciated. By the way, in photoshop print dialogue, i color manage the document, photoshop manages the color, the printer profile is set to the I-1 custom printer profile, rendering is perceptual, and black point compensation is checked.
Thanks,
Joe

I manage color and service bureau printing at the college I work for, and we've been fighting the upgrade to CS4 for some time. Here's what we have so far.
Apple dual G5 machine with 10.5.8
Adobe PS CS3
Adobe PS CS4
3 x Epson 4800 Pro printers using an IP connection and using Driver version #6.11
We manage color with custom created profiles in eyeOne with eyeOne pro hardware.
When moving to CS4 for printing prints have gond dark and the color has taken an odd shift.
When printing with CS3, we get consistent color and density
All things being equal in the print settings for each version of PS.
I have heard that CS4 addresses the printing system differently (using an updated printing api from Apple) is this true?
When running prints from within another app (any app really) that prints directly through the OS, we get similar results as CS4.
The best explaination that we've been able to get is that the (epson) print driver is operating on the older api calls, and that when the OS (or CS4) is operating on the newer calls, the color and density issues arise.
Can anyone verify this?

Photoshop CS3 crashes on startup running snow leopard

I am running Photoshop CS3 on iMac with OS x 10.6.8. Photoshop crashes on startup or if it does start crashes when I try to perform a task. Startup crash gives error code -600

John Joslin wrote:
You should be able to remove the drivers in Device Manager – or just uninstall the Dell all-in-one.
You can also disable the TWAIN plug-in by putting a tilde in front of its name.
Fantastic! Puting the tilde on the front of the twain plug-in has sorted it. At least it's working until I can get the drivers off. I tried disabling the drivers, no luck, tried removing from device manager, still no luck. Thats something I'll need to sift through the Dell forums for.
But thankfully, Photoshop now boot and works. Thanks guys!

Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and f

Hi! I work with Photoshop/Premiere Elements 10 on my snow leopard (10.6.8) without problems since years. Now I want to move over to the new MacBook Pro (and lion 10.7.5) but only Photoshop runs on it, every Premiere version (I downloaded Elements 12 and further more) stops installation and shows Installation ERROR: ASU has quit unexpectedly, Media DB Error: 18. Please help!

run the cleaner and retry installing per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Canon 5D Mark II, Photoshop CS3 and Lightroom 2.4

All,
I know that this has to have been answered elsewhere, but I have not found what I'm looking for.
I have purchased a new Canon 5D Mark II camera which will arrive Wednesday. As far as software on my Mac Pro, I have Adobe Creative Suite 3 Design Premium, which includes (obviously) Photoshop CS3. I am also running Lightroom 2.4. I am under the understanding that in order to open RAW files from the 5D Mark II, you need to have Adobe Camera Raw 5.X, which is not supported by Photoshop CS3. I also understand that Lightroom 2.4 CAN open the 5D Mark II RAW files. First off, are both of my statements to this point accurate? If so, can I use Lightroom to open the RAW files, do whatever adjusting I would like in Lightroom, then export the modified file (in TIFF, for example) to Photoshop CS3, and go on my way? Or will this not work?
If the answer is no, what are my options for using the software that I have with my Canon 5D Mark II? Am I REQUIRED, now, to upgrade to Photoshop CS4? If so, can I buy the CS4 Upgrade for Design Premium, if my CS3 Design Premium is the Education version?
Thanks for any help on this...I'm hoping to avoid spending any more money than I need to in software just to be able to process images from my new camera. I'm sure I could always use the Canon supplied software to open the RAW files, but I'd prefer to do so in the Adobe family of programs.

cabasner,
I upgraded to CS4 when I got my 5D2, and I can't stress enough how much better CS4 is. It's worth the upgrade even if you didn't get the 5D2. It's more stable that CS3, and ACR is insanely better (as is the Bridge... that's actually usable now!). ACR in CS4 has Adjustment brushes for Exposure... that's right, touch-up areas in ACR and it's totally non-destructive. Vibrance has been added also. In PS, your Dodge & Burn tools have a totally new algorithm which works so much better it's nuts. You even have a Legacy checkbox to see the difference. With the insane amount of image data in the 5D2, those tools work very well. You also have OpenGL support in CS4 now, which means you can view the image at any percentage and it looks like 25/50/75/100. And since your graphics card is now used, Photoshop CS4 is FASTER. And with the Clone Tool you can see what will be put down on the image inside the tool's circle, BEFORE you press the mouse. Talk about an easy way to line up the edit! Oh, then there's all the Adjustment layers... man, talk about a non-destructive time-saving edit! And the panels now stay off to the side, not covering up the image anymore. There's more, I'm, not even remembering everything. Adobe got PS right with this version. I would spring for CS4 in a New York minute, it's the perfect partner for our 5D2s.

DW CS4 crashes in Snow Leopard

Hi
Is it me or does DW CS4 just absolutely not work in SL 10.6.1 at all. Illustrator and Photoshop seem ok.
I have managed to get it to launch previously, but not today. Is it a known issue or should I de/re-install?
Any help is appreciated before I go through the painful re-installation process.
Crash log is attached.
Regards
Craig.

Snow Leopard and CS4 are not the best of friends.
I might also recommend you visit the Apple forums, although I have not looked this topic up on that site.
I use CS4, I am not that experienced, but I have problems daily with CS4 freezing in Snow Leopard.
This is no help I'm sure, but wanted to let you know it is not your hardware, but in my opinion a conflict between Snow Leopard and CS4, whomever is responsible.
Thank you,
Dan

Upgrade Photoshop CS3 to CS4: preparations?

Hi,
I just purchased Photoshop CS4 upgrade. I have CS3 installed. Do I have to uninstall Photoshop CS3 before I can install CS4 or can I just install CS4 over CS3? Since this is an upgrade version, does it require CS3 to be present?
Thanks in advance!

The upgrade does require either CS3 to be installed or the serial number from CS3.
You can install both CS3 and Cs4 on the same system. They are wholly independent.
Whether or not you uninstall CS3 is your choice. But if you do, be certain to save any custom actions, brushes, styles, etc., first.

Enabling Installation of CS3 and CS4 products that will not install on Windows 7 64Bit.

Adobe installers are not known for their helpful or forgiving ways & I have more than once had to reinstall Windows when installation of CS3 and CS4 products has failed with patently inscrutable errors.
The background to the current issue that I was attempting to install PS CS4 on a W7 system which already had CS CS3 installed. The CS4 installer threw up inscrutable messages indicating that the installation could not proceed and to contact Adobe (they are joking right ? Their phone & web support is notoriously UN-helpful).
After reading through threads suggesting that I uninstall CS3, apply CS3 and CS4 cleaning scripts I was in exactly same position I have found myself in on least 2 occasions with WinXP. By this time I couldn't event get CS CS3 to reinstall!
Then I decided to review the event log and found a number of installer events thrown up by the Adobe installers resembling "Error 1402. Could not open key: UNKNOWN\Components\xxxxxxxx".
I tracked down this very helpful solution which allowed me to change the registry permissions on the parent key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\ Components and propagate the new permissions down to the child keys.
http://www.okino.com/conv/changing_windows_registry_permissions.htm.
My advice is to follow instructions for "A More All-Encompassing Solution" and propagate the permissions right down to all the child keys as I could see a number of separate adobe installer errors in the event log. Also note the instruction to change the Owner from 'System' to 'Administrators' in Advanced settings. This is necessary in order for the Permissions change to be accepted and replace all the child object permissions.
As with most registry changes good advice to backup your registry hive first (although I didn't; by this time I was already expecting to have to reinstall Windows) and restart your system after making the registry changes before attempting to install / reinstall CS3 or CS4 products.
Hope this solution works as well for others as it did for me as the Adobe support on this issue has been next to useless.
[P.S. Q: Did you hear the joke about the guy who worked on product installation at Adobe rocking up at job interview with 'Adobe Installation Project Team' on his Resume? A: That that is the joke! If you wanted another job in installation development you would hardly admit to experience at Adobe ;)]

John Joslin wrote:
We don’t want people messing with the registry when they don’t need.
My apologies John I didn't realize that I was addressing the official custodian of Photoshop.
Incidentally my advice is intended for others in a similar situation who find themselves stalled during installation and otherwise contemplating a re-installation of Windows. I believe this would be obvious to most forum participants who had actually read my original post.

PhotoShop Elements 6 for Mac under Snow Leopard?

Hi. Apple's new operating system for Mac, Snow Leopard is being released tomorrow.
According to the Snow Leopard wiki, Photoshop Elements 6 does not work under Snow Leopard:
http://snowleopard.wikidot.com/
I contacted Adobe to ask if they had any plans to update Photoshop Elements 6 to work with Snow Leopard. The response I got from their support was that Adobe Photoshop Elements was programmed before Snow Leopard and so they weren't responsible if it didn't work.
I am pissed because of course Photoshop Elements was programmed before Snow Leopard. EVERY software program was. Most of my software (and I have a lot of apps) are being updated for Snow Leopard by their developers.
I'm writing this post just to make sure that Photoshop Elements doesn't work under Snow Leopard. It's possible whoever posted that Photoshop Elements didn't work under Snow Leopard could have been having an isolated problem.
So, if anyone tries Photoshop Elements with Snow Leopard, please post here whether or not it works.
Thanks a lot.
Mirskyman

No, there are no significant known conflicts with Snow Leopard, so that's not your problem. Have you deleted prefs since the upgrade? Was this an upgrade in place rather than an erase install? If so, go to your username>library>preferences and delete:
com.adobe.Photoshop.Elements.plist
Adobe Photoshop Elements 6 Paths Folder
Adobe Photoshop Elements 6 Settings Folder
Opera preferences
repair permissions and see if it's any better. Do you have any third party content installed in PSE? There may well be conflicts with that, if so.

Photoshop cs5 and cs4, photoshop help...f1 why online

Hi
i have installed on w7 photoshop cs5 and photoshop cs4
well when i try to read the manual (the help files) clicking F1 or under the menu Help-> Photoshop Help F1 ,photoshop cs5 and cs4 connect to the net
for example cs4 opens a firefox page with the help guides
cs5 opens a windows connected to internet
for example i need to know some shortcut and i have to be connected to the net
that's weird
is there a way to use the offline help? like cs3
thanks

You can download the help files as a PDF from the Photoshop Support pages.
If you want to access the offline help files from F1, you have to disconnect PS from the Internet.
If you want to turn off Community Help so that local Help opens by default, do the following:
   1. Open the Connections panel (Window > Extensions > Connections).
   2. From the Connections panel menu , select Offline Options.
   3. Select Keep Me Offline and click OK.
Note: When you disable web services from the Connections panel, all other web services (such as Adobe Kuler and Adobe ConnectNow) are also disabled.

Photoshop CS3 and Epson R2400

Since I installed Leo on my Mac Pro, my R2400 will not work as it used to. I can not access the printers option menu where I can setup the paper, printer resolution, etc. When I am printing out of photoshop CS3 I will only get a standard printer menu provided by Mac OS and not by epson. I can´t change any settings and the prints come out terrible. I use the latest Epson driver - 6.12 - but nothing works as it should. Does anybody experience the same problems or might have a solution for this? I got plenty of print jobs to do before christmas! Thank you for any hints ... Jochen, Germany

Jochen,
I managed to get my 2400 printing OK now. I spent a completely wasted hour e-talking to Epson UK Support yesterday. They offered nothing useful and spent all the time telling me to do obvious things, which was very frustrating. Then I decided to go back to basics. I ditched all the personalised settings in all the print dialogue boxes and tried printing with only basic settings. I had professional print profiles for each of my papers and printers, but none of these will now work and I think that they were the crux of the problem.
This is what I did:
Step 1 - I turned off my printer. After ditching the entire Epson folder from the library and restarting Leopard, I downloaded the current Mac drivers from the Epson Support website and started by reinstalling the 2400 from scratch. I turned on my printer. I ran the downloaded installer and then went into Apple/Preferences/printers and faxes and removed the 2400 that leopard had installed with the gutenburg driver. I then installed the 2400 again through this screen and checked that the downloaded Epson 6.12 driver had installed. It had.
Step 2 - I went to page set-up for the photo I wanted to print in Photoshop CS3 and in Format For: I selected Epson Stylus Photo R2400 and in paper size: I selected A4 (sheet feeder - borderless) and clicked OK
Step 3 - I selected File/print. In Printer I selected Epson Stylus Photo R2400. In colour handling I selected Printer Manages Colour and in Rendering Intent I selected Relative Colorimetric. The I pressed the Print button.
step 4 - I then pressed Proceed in the larger than paper dialogue box taht then appeared and this closed.
Step 5 - This brings you to the Epson Printer Dialogue box. I selected the Print Settings section and selected Premium Glossy Photo paper as the Media Type. In colour settings I selected Epson Standard (sRGB). and selected the Advanced radar button below and best photo as the print quality. When I pressed print I got a good quality print....and it seems to work every time now!
I have also tried this with my Epson 950 and it also works. In fact I am getting better prints with this one than I was before Leopard!
Don't ask my why it is working this way. I don't know. I used to let Photoshop CS3 manage the colour using my profiles, but this will not work now. I suspect that as my profiles were done in tiger they are Tiger dependent. I will contact my supplier next week and discuss this with him. I am still disappointed that I seem to have lost complete control over my printing and blame Apple and Epson in equal measure. From my "discussions" with Epson support it is clear that their "fix" is aimed at the amateur user and not those requiring control over the production phase!
I hope this helps.
David

I keep trying to download Photoshop CS3 and a get a 404 error page, does Photoshop CS3 not working with a new Mac operating system?

I keep trying to download Photoshop CS3 and a get a 404 error page, does Photoshop CS3 not working with a new Mac operating system?

you must also use a browser that allows cookies. try a different browser or download from adobe.com
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Photoshop cs3 and cs4 brush lag /snow leopard 10.6.6

Similar Messages

Maybe you are looking for