Photoshop CS3 can't do lowercase type-only large and small caps

Photoshop CS3, G5 PowerMac Dual 2GHz w/ 7GB RAM
A weird Photoshop problem: using the type tool, I can only produce type in large-and-small-caps, as opposed to upper and lower case. I can't generate any lowercase text. I've tried all the usual diagnostic tools: trashing the prefs seemed to work at first, but it's destructive of other stuff I don't want to lose, and anyway the problem came back after a while. I tried the Phantom User, and learned that the problem is tied to my User Identity, i.e., the problem doesn't exist in other User identities, but how do I make use of that information? I considered migrating to a new user identity, but I would have to go through every single appliciation, blah blah blah. So: does anybody have a quick, elegant solution to this, or is this a problem that has suddenly cropped up elsewhere? I'm not crippled by it, thanks to Illustrator CS3, but it's a convenience that I miss. And how do I trash the PS prefs without losing my brush tool presets?

Birck,<br />>trashing the prefs seemed to work at first, but it's destructive of other stuff I don't want to lose,<br /><br />What "destruction" are you talking about?<br />>and anyway the problem came back after a while.<br /><br />I assume this happens with fonts other than those (such as Trajan Std) that were designed with just caps and small caps. It sounds like it may be a duplicate or corrupted font issue. Did you use a good font manager to check for duplicate or corrupted fonts? Did you clear font caches (with Cocktail)?<br />> tried the Phantom User,<br /><br />I see a black mask, cape and scary organ music here. <g> If logging in as a new user clears the problem, you may have a corrupted user identity and should stop using it.<br /><br />Neil

Similar Messages

  • Is Adobe Photoshop cs3/10 still being supported?  Mac crashed and need to get up and running again.

    Is Adobe Photoshop cs3/10 still being supported?  Mac crashed and need to get up and running again.  Thank you for any info on cs3. mayord

    I believe if you were to ask Adobe Support they would tell you that CS3 is no longer supported by their services, if that is what you are refering to when you say "being supported".  That means they are not likely to offer assistance with you re-establishing it.
    But you can probably re-establish it yourself.  If you need to download it there is a place for that available:
    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  • Photoshop CS3 can't save .PSD files

    I have Windows XP, Adobe Flash 10.2 ..
    I can save all file types two weeks ago, and then one day I just can't. I didn't install/delete anything on my computer before that, it just happened all of a sudden. Scanned for viruses/malware, none found.
    PROBLEMS:
    1) When I save for web images, I get: "Some of the specified files already exists in the target location. The files marked below will be replaced:", though it IS a new & different file/filename. So I click "replace" and I get this: "Adobe Save for Web Error: Could not write the file. The file was not found". Then I click OK, and Cancel. I checked and nothing was saved except TMP54ee.tmp which is 0bytes.
    2) When I save as... .psd, I get: "Could not save as C:\Name\filename.psd because the filename was not valid". I checked, just some gibberish that is TMP54ee.tmp AND ~ps8455.tmp (both 0bytes) are saved.
    So I looked online for answers. Trashed settings, uninstalled/reinstalled PS CS3. Nothing worked, so I looked for more. Finally got one solution that worked: Edit > Preferences > File Handling > Uncheck Enable Version Cue. It kinda solved just Problem 1, for web images: KINDA because I get the same error messages on problem 1, but when I check the folder, PNG file IS saved (though filename.png.tmp and TMP34ee.tmp are still saved along that).
    *** When I close PS CS3 and open it, sometimes Enable Version Cue is ~magically~ checked again and I have to uncheck it, sometimes it's good. So I can live with that as long as my PNG & JPGs can be saved.
    PROBLEM #2 is still unsolved, & I'm still desperate for answers. Can anyone help me? Like I said, I've tried trashing the settings, uninstall/reinstall, updated Flash, nothing worked. And I can save PSDs until two weeks ago.
    Help me please...

    That sounds like something outside of Photoshop is interfereing with file saving.
    None of what you describe should be possible with a clean copy of Photoshop.
    But bad anti-virus, disk compression utilities, etc. could cause behaviors like that.

  • Photoshop CS3, can't import RAW2 what are the steps to succeed?

    Hi
    It all started with taking stills with a new Panasonic DSLR. I shot RAW2.
    I tried to open at Photoshop CS3 but, though the files are recognized, I can't select them.
    I seek guidance to take appropriate steps to resolve this. Thank you for your time. -n
    Steps I took to trouble-shoot:
    I updated my Camera Raw plug-in from 4.0 to 4.6
    I did that separatly online, without using the Update mode [Adobe Updater] in Photoshop CS3.
    I then tried to update Adobe updater to 5.1.1, from my computer, but I received this message:
    "Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance"
    I did convert succesfully to .DNG and can review the files in Photoshop CS3 but they are over-saturated, creating
    hot spots, which makes me suspect I made a mistake during convertion.

    a new Panasonic DSLR.
    Which Panasonic camera exactly?
    Supported cameras are listed here
    Camera Raw plug-in | Supported cameras

  • Photoshop CS3 can't see some fonts

    My Photoshop CS3 cannot see at least one of the TrueType fonts I have currently installed. The font in question is Sublime by Conoglio Type and it was accessible by Photoshop CS3 when it was installed on a previous computer under Win XP. I am presently running Win 7 and my other apps are able to find and use Sublime without difficulty, including other Adobe apps, so this problem seems to be unique to Photoshop.

    I reinstalled the font just to make sure, but in so doing I realized that I was wrong -- it is a PS Type 1 font rather than a TT as I had thought. Then I noted that none of my Type 1 fonts showed up in Photoshop. So I decided to try copying the font files (PFB as well as PFM, of course) to C:\Program Files (X86)\Common Files\Adobe\Fonts and found that this seems to be the secret and that the font is now available for Photoshop use.
    Why it cannot access it in the main Fonts folder remains a mystery, but one I don't actually have to solve.

  • Have issue photoshop cs3 can't open download from adobe

    my pc crashed...so deauthorized photoshop cs3 from it to authorized to laptop...with support from adobe gave me the file to download...the issue is i cant open the download file they sent me any ideas for what i need to do???
    thanks

    Hi tsm,
    Use the link given below to download the 7z extractor on your PC.
    http://www.7-zip.org/download.html
    Thanks

  • My Bridge update 5.2.0.4 has wrecked previews for all DNG files. They appear only sideways and small and I can't open Camera Raw in Bridge. Anyone else have the same problem?

    I updated Bridge yesterday. CS6 5.2.0.4. Mac OS 10.9.5
    Now all previews (DNG files) in Bridge appear sideways and only small thumbnail size.
    Also Camera Raw has been disabled.
    I have tried purging cache for the folders as well as purging entire cache.
    I have also spent over an hour on the phone to tech support which mainly involved being switched between departments and trying to understand anyone on the phone.
    Can anyone help?

    Your Performance preferences screen capture reveals you have a single hard drive with little available space to accommodate both the Photoshop scratch file and the swap files of the OS.
    It's obvious that Bridge finds itself at times with insufficient space to build its cache.
    However, it's unclear why that should affect only DNG files and not other type of image files.  Puzzling, unless the DNG files are the only large image files you have.
    Parts of the following may illustrate what happens when the scratch file is on your boot drive:
    The rule of thumb I follow to figure out scratch space says to figure on 50 to 100 times the size of your largest file ever multiplied by the number of files you have open.  I have seen the scratch file exceed 800 GB once, an admittedly rare occurrence, but it often exceeds 200 GB when stitching large panoramas and the like.
    As an example—and stressing that I'm aware that others have even more scratch space than I do—I keep two dedicated, physically separate hard drives as my primary and secondary Photoshop scratch disks and a lot of GB free on my boot drive for the OS.  I also have 16 GB of RAM installed.
    Additionally, if you only have a single HD, i.e. your boot drive, you'd need it to be large enough to accommodate both the swap files of the OS as well as Photoshop's scratch.

  • Illustrator CS3/Photoshop CS3 - how do they work with MS XP64 and MS Vista64?

    I am building a new computer and am trying to decide whether to use XP 64 bit or Vista 64 bit.
    I currently have Adobe Illustrator/Photoshop CS3....but will surely upgrade to CS4 at some point.
    What is your recommendation for OS choices I've noted? Any horrible experiences with either?
    Thanks.

    CS3 and CS4 run without problems on my 2 year old XP64 machine at work (Dual Xeon, 8GB RAM) and should work even better on Vista 64. Apparently, if you want to use the 64bit version of Photoshop CS4 with working OpenGL, you have no choice in the matter and must use Vista64bit. For the "normal" 32bit version this limitation does not apply and it runs nicely with hardware acceleration on my end (Quadro 5500, needs the "Allow old GPUs" registry hack). Illustrator in that regard should be even less critical, as it does not use any hardware acceleration at this point except for drawing the interface....
    Mylenium

  • When i press the i key with the shift key nothing happens. I can get a capital i only by pressing the cap lock key whats wrong.

    When i press the i key with the shift key nothing happens. the only way I can get a capital i is by using the caps lock key what is going on. Also from time to time my mouse acts like someone is sitting on it. this stops when i press the command key. i am using the lateist wireless mouse and keypad.

    does it only happen with the i key?
    if it doesnt then try presing shift first then i (or any key) second instead of at the same time.
    if it only happens with the i key then what i would do is take the keyboard and mouse to an apple store and ask them if they will hook it up on their computer to see if it is the keyboard or computer.

  • Default type too faint and small

    After I upgraded to the latest version of the Firefox the print on most sites I visit became virtually unreadable because the text is so faint. In same cases I have to block the text to be able to read it. It became impossible to use the "Reply" or Compose" in gmail (online) because the default type-size is so small and faint (grey? or light?). I literally have to go to a notepad to compose my message, then block and copy, and finally paste it into the reply window. I played with default colors, etc but nothing seems to fix it. I even used the classic-theme restorer add-on and still no improvement...
    Anybody else have this problem? What is the solution?

    Hello,
    First, you have a possible Trovi infection, at least from what I have seen in your "browser.newtab.url" setting. Please visit:
    * http://malwaretips.com/blogs/trovi-removal/
    If you have already removed it from Firefox, then ignore everything I posted above.
    Can you look into your font settings for:
    * Tools (or [[Image: New Fx Menu]]) > Options > Content
    And make sure that the colors are set appropriately? You can also click "Advanced" and try some of the options there, make sure that you change the settings for "Western" if you want to use custom settings (unless you browse sites of different languages and want to change those too) - be sure to uncheck "Allow pages to choose their own fonts, instead of my selections above" if you want.
    Please see [[Change the fonts and colors websites use]] for more information.

  • Added a Network, now Photoshop CS3 can't open the file...

    and says the file is no longer compatible. Also saya there are some unsupported blending problems. Is this a Network setting problem? It's a NETGEAR ReadyNAS +nv

    I may have found the problem.
    1. Changed the default printer settings to LOCAL - thank you
    2. Updated the video driver.
    Now the files open after being asked I want to keep them the layers- which I never had to do before.
    I still can not export using PSD2FLA driver, which is very important to me, so if you have any recommendations. The Photoshop export to Flash gives very poor quality layers.
    Thanks for the help. Hopefully I am back on track.

  • Photoshop CS3 Can't Open or Create Files

    Since today I'm having problems opening or creating files.  When I try to, nothing happens.
    I tried resetting the preferenced file, but that didn't work.
    I don't have a network printer, so that can't be it either.
    Any help?

    I assume you tried this, but have you rebooted the computer?
    Has the screen resolution been set to a very small value? It needs to have at least 768 pixels vertically in order to show the Save dialog, for example.
    Is it possible the boy facilitated the download and installation of other software on the computer?
    -Noel

  • How can i make playlists with only music and no videos?

    I would love to be able to make a playlist that only has music so I can figure out exactly how much I have in there and also be able to put it on my older iPod.

    Create a Smart playlist with the rule:
    Kind>contains>audio file
    Check the box "Live Updating"
    You can read more about smart playlists here: How to create a Smart Playlist with iTunes

  • Can the standard datepicker show only Month and Year

    Hi All,
    My requirement is to show the Date Picker with only the Month picklist and Year picklist.
    That is there shouldnt be the date table below.
    Is it possible to show...
    Thank You,
    Sombit.

    Sombit,
    You can create a poplist and show there Month & Year. like Jan, 2009, Feb- 2009.
    Thanks
    --Anil                                                                                                                                                                                                                           

  • CS3 - Can I Import AVCHD footage into Premiere and if so, how ?

    Hello All;
    Can you tell me if I can Import AVCHD footage (Like from a Panasonic Professional Camcorder) into Premiere CS3 ? My version doesn't recognize the .MTS files that the camcorder generates. If there is any way to import AVCHD footage, could you tell me how ? Thanks.
    Tim

    Convert AVCHD to HDV http://forums.adobe.com/thread/390605?tstart=0
    or Cineform Neo Scene $100-$129 http://www.cineform.com/neoscene/

Maybe you are looking for

  • Error Job getting cancelled

    Hi all, I am doing Stock initialization for 2lis_03_bx DS.It is extracting data but job is getting cancelled. the log is as follows " Job started Step 001 started (program RMCBINIT_BW, variant &0000000000005, user ID KRISHNA) 197.516 stock data recor

  • Zen Vision:M 30gb "Not Supporting Subscription Content&qu

    So I've been using my Zen for a long time now and its been running great but these last couple of weeks I've been getting a couple errors I can't resolve. I use Napster to Go, and its been treating me fine until these first few problems. It no longer

  • H264 asynchron after rendering

    dear community, I have recently bought Adobe Premiere Elements 11 to cut recorded TV program. It was recored from DVB-C via Terrratec H5 Stick using Terratec Home Cinema. First i tried cutting t with 2 different free programs, Smart Cutter and Avidem

  • Itunes says I'm not connected to the Internet Windows 7

    I am using Windows 7 and have downloaded an update to Itunes.  It now says it can't connect to internet, even though I am connected.  I've tried uninstalling and reinstalling.  I also went to the command screen and typed something in with the word fl

  • How to change an Apple ID on an Ipad

    Hi  it's me Chainnig again the guy that kept asking question last night  alright so my next question is how do you change an Apple ID on and Ipad  I went to and apple iPad help site that said it would change my Apple ID me and my mom currnet Apple ID