Photoshop CS3 color management "Save for Web" problem

This problem is getting the best of me.......
After spending 3 full days researching this problem, I am no closer to finding an answer than when I started. I still cannot produce a usable image through the "Save for Web" feature of Photoshop CS3. I have read web page after web page of "Tips, Tricks and Recommendations" from dozens of experts, some from this forum, and still I have no solution... I am exhausted and frustrated to say the least. Here's the simple facts that I know at this point.
I have a web design project that was started in PS CS1. All artwork was created in photoshop and exported to JPG format by using "Save for Web". Every image displays correctly in these browsers (Safari, Camino, FireFox and even Internet Explorer on a PC).
I have recently upgraded to PS CS3 and now cannot get any newly JPG'd image to display correctly. My original settings in CS1 were of no concern to me at the time, because it always just worked, and so I do not know what they were. I have opened a few of my previous images in CS3 and found that sRGB-2.1 displays them more or less accurately. I am using sRGB 2.1 working space. Upon openning these previous image files, I get the "Missing Profile" message and of course I select "Leave as is. Do Not color manage". CS3 assumes sRGB-2.1 working space, opens the file, and all is well.
The problem is when I go to "Save for Web", the saturation goes up, and the colors change. The opposite of what most people are reporting. Here's another important point... new artwork created in CS3 does exactly the same thing, so it's not because of the older CS1 files.
I have tried every combination of "uncompensated color", "Convert to sRGB", "ICC Profile", etc. while saving. I have Converted to sRGB before saving, and my monitor is calibrated correctly.
I have tried setting the "Save for Web" page on 2-up and the "original" on the left is already color shifted before I even hit the "Save" button. Of course, the "Optimized" image on the right looks perfect because I am cheating by selecting the "Use Document Color Profile" item. Why do they even have this feature if doesn't work, or misleads you?
Does anyone have any ideas what could be happening here? Why is this all so screwed up?
CS1 worked fine out of the box.
Final note: I do have an image file I could send along that demonstrates how it is possible to display an image exactly the same in all 4 of the browsers I mentioned with no color differences. It is untagged RGB and somehow it just works.
I am very frustrated with all of this and any suggestions will be appreciated
Thanks,
Pete

>> First of all... I'm using an Adobe RGB image master... I open it and get the Profile Mismatch Screen... I choose Use Enbedded profile... all looks well. Next I go to Proof Setup > Monitor RGB... again all looks well, no change that I can tell.
This has further confused the issue on several points, not the least of which version PS you are doing this with?
>> AdobeRGB> Convert to Profile > Working Space sRGB-2.1... all still looks well... but now, when I go to Proof Setup > Monitor RGB... I see the insane oversaturated look that is driving me nuts.
That is your strongest clue...it sounds like you have a bad system or bad monitor profile. To rule out the monitor profile: Set sRGB as your monitor profile in System Prefs> Displays> Color.
>> Adobe RGB image master... I open it and get the Profile Mismatch Screen... I choose Use Enbedded profile... all looks well. Next I go to Proof Setup > Monitor RGB... again all looks well
That doesn't make sense, stripping an embedded AdobeRGB profile should desaturate the color in Softproof MonitorRGB, especially the reds -- you have something wacky going on there.
At this point I think you need to review the links and get a grip about how color management and profiles work...
BTW, forget about setting ColorSync in PS COlor Settings, use Adobe ACE.
MO,
I think SFW is fixed under CS3 :) By default it Converts to sRGB and strips the profile.

Similar Messages

Problem: Color Management/Save for Web on Wide Gamut Monitor

Hi,
I've got a problem with color management - I thought I understood it, but it seems as if didn't. So I'm trying to kindly ask for help.
I'm printing, and also trying to save an image for Web.
My setup:
- Win 7, CS 5
- Calibrated Wide Gamut Monitor (eizo cg223w)
- Photoshop set to ProPhoto (I don't want to start a discussion adobergb vs prophoto)
- Save for Web and Devices, Embed Color Profile, Convert to SRGB
- Viewing in Firefox 3.6 with Color Management enabled
Problem:
Image: http://dl.dropbox.com/u/311345/luchs-1024.jpg
If I compare the file in Firefox and Photoshop, the Firefox presentation is slightly more saturated - and I have no idea why.
I thought it should work with the above workflow.
Here is a screenshot where you can clearly see a difference (Note: the additional over-saturation here is caused by the wide gammut monitor when taking screenshots, in reality its not as dramatic as that): http://imgur.com/MFPbU but you can clearly see the difference.
I would be very very thankful for any pointers what I'm doing wrong in my workflow!
Thanks in advance,
Christoph

function(){return A.apply(null,[this].concat($A(arguments)))}
ch_bla wrote:
- Monitor calibrated
- Edit under ProPhoto RGB, 16 bit raw files
- Save for Web and Devices, Embed Color Profile, Convert to SRGB
Is this the preferred way?
It's a reasonable and correct way to do it, assuming you want to embed a profile in the images.
Since at least in some browsers and cases the colors selected within the HTML elements must match image colors, one can sometimes make a case for not embedding any profile at all, but that's really looking backwards. Browsers are moving forward toward not only managing colors in images but also in the HTML elements themselves. If you want your images accurately portrayed in as many places as possible you're doing the right thing looking forward.
Personally I embed the sRGB profile in my web images, as you are doing. And I check things primarily with IE and Safari.
Unlike you, I prefer to edit using the sRGB color space, but that's just personal preference. I find it more convenient to use File - Save As instead of File - Save For Web & Devices, and I get caught by gotchas less often this way. Your preference ensures you don't lose any colors at the extremes of the gamut while editing and it could easily be argued that that's better, depending on what image products you produce.
As for the article you mentioned, anyone who would set their preferred working space to Monitor RGB or use Proof Colors in normal editing is asking for trouble, and may not understand color management at all.
-Noel

Photoshop CS3 crashing on Save for Web & Devices

I'm having a problem with Photoshop CS3 crashing every time I use the "Save for Web & Devices" option. It allows me to open the dialog box and configure my file, but as soon as I click Save, it crashes. Has anyone else had this issue and if so, how did you resolve it?

Then manually remove the prefs by reading this:
http://forums.adobe.com/thread/375776?tstart=0

Adobe Photoshop Elements 2 and 'Save for Web' problem

Hi everyone,
I have used Photoshop Elements 2 for some time with absolutely no problems. However when I try to use the save for the web option I get an 'export could not be completed due to a program error' message.
Nothing relevant is mentioned on Adobe's support site. After having gone through the usual 9 troubleshooting procedure I suspect that there is a problem with the 'Save for Web EL' plugin located in the PE 2 plugins folder. Has anyone else experienced this? Is there a way I can somehow find a functional plugin?
Thank you for reading this post.
PowerBook G4 DVI 667 Mac OS 9.2.x

I don't use Photoshop elements myself, but from Photoshop CS it works fine. I use JPG compression and optimization. First of all - make sure the file format extensions are all available. Applications/adobe/photoshop elements/file formats AND ALSO Applications/adobe/photoshop elements/photoshop elements only/file formats (here I am assuming the paths are the same or similar to Photoshop). Also, check the extensions disabled folder (Control click on Photoshop and go to package contents). If it's none of these, I suggest you check the settings in Elements when trying to save and make sure you are not using an option that conflicts.
Also, check the Adobe forum. http://www.adobeforums.com
Check for software upgrades also.
You do have enough hard drive space and RAM I assume. If you are using PS Elements and virtual memory is on, you may not have enough phsyical space to save the file (but not likely)
P.S. I see (after i wrote) that you are running 9.2.2 - so the paths will not be the same as if it was on OS X - but they will be similar.

PNG changing colors using save for web (CS2)

Im having a problem with making PNG pictures when using the "save for web" function (this also happens in Image ready)
I make an image in sRGB color space and chose "save for web" and set the settings, all looks fine and i save it as png8 or png24.
Then when i view it in a browser the colors af "off" (desaturated) ??
But if i chose "Save as" in Photoshop, and chose png, and save it that way, the color macth up and looks allright.
What im a doing wrong ??
I have made a test with to sets of colors / picture one with "websave" color and one without then save them "using save for web" in gif, jpg with profile, png8 and png24
The gif and jpg goes well but the png's colors goes "off"
I also saved the to files using "save as" and here the png's colors looks fine
(Ther are also some screendums of my color setting, "save for web" setting and my screen profile if that can be of anny help
http://home19.inet.tele.dk/jgom/pngtest/
Also! can anybody tell me this ?
When using "save as" i cant chose what png im saving as ? (8 or 24) What type of png dos PS use when you save it like that ???

Now I've read up on it, it seems the issue is indeed gamma.
(I really appreciate the "that's impossible, you must be doing something wrong" comments, by the way. Not "hmm, I don't know," but actually "what you've described in detail isn't happening; you're imagining things." Super helpful.)
Anyway the real question is: is there a way to stop Photoshop from including gamma data? It's apparently an optional portion of the PNG spec.
The whole gamma thing is unfortunate, but the *really* unfortunate bit is that Photoshop includes this information at all, particularly in a Save for Web context.
Most importantly, it seems this has been an issue for some time (Google "PNG Photoshop gamma"), and PNG is usually used for web, so why on Earth hasn't Adobe addressed this? Let's not forget that Photoshop is the industry-leading tool, and the Extended version costs $1000 by itself. The only options I've seen for saving as PNG in PS so far is sRGB conversion, bit depth, transparency, and interlacing. This whole gamma thing seems pretty unacceptable behavior, even by default.
I'm looking into pngcrush; does anyone have a simpler solution to strip the gamma information? Of course, if there's a way to do this in Photoshop itself, please please let me know.
Thanks.

Photoshop CS6. Save for Web Problem - Don't remember folder location

Hi!
Found one more problem with Save For Web in Photoshop CS6.
Example:
1. New Document
2. Choose - Save for web
3. In dialog window Photoshop CS6 offer to save in - os My Document Folder
4. Ok, every time I don't really need to save in os folders - I save files to my folders. So, change folder ...for example to disc D
5. Create another New document
6. Choose Save for web
7. And.... - Photoshop CS6 offer to save my file in os My Documents AGAIN !!!
So, in fact it's real uncomortable!!! ...if I save different files for web frequently ....I need every time change My Documents....it makes me nervous.......
Here - compare with CS3: CS3 remember "old" folder location even at another session (for example - after reload os)
Is there any fix this problem?
p.s. Testing on:
OS - windows 7 64 bit
cs6 - 64 bit extended
cs3 - 64 bit extended

Noel, Yes! In your example everything works like on your video. May be my explanation was not so clear, so...I'm trying to describe in more details.
I don't know how to make video & animated gif by capture the screen...so I'll try to explain by words
1. Start CS6
2. Make New Document
3. Save for Web (save parametres are: JPEG, HIGH etc....I think it doesn't matter)
4. CS6 offer "My Documents"
5. Change the way to "Disc D"
6. Save it by name for example "Untitled-1".... & close window "Save for web"
7. Choose "Save for Web" again
....So, at this step - CS6 remember my current location "Disc D" even I open other file & use command "Save for web"...it saves to Disc D. Everything is ok.
....continue:
8. Shut down the CS6
9. Run it again
10. Create new file or....even open saved file on disc D in previous session - "Untitled-1"
11. Save for Web
So, it's final: CS6 offer the "My documents" AGAIN
....continue:
12. Run CS6 - Make New File - Save for Web to disc D by name "Untitled-1"
13. Keep the photoshop session & create new document...let's call it "Untitled-2" - so, now I have 2 files opened in CS6: "Untitled-1" (it was saved on disc D before) & new "Untitled-2"
14. So if I'll try to save second file "Untitled-2" fo web CS6 offer the way "My documents" AGAIN!
p.s. Tryied to do the same on CS3 - Shut down CS3 2-3 times, opened different files, create new docs - there's no trouble. In global - CS3 remember last way (in my case it's "Disc D") & doesn't change it by itself. In fact working in CS3 I din't feel any problems with this command "Save for Web", that's the reason I didn't write any questions on forums etc..... But starting to try CS6 I really feel it makes the work to change every time the folder ways not so comfortable...so I wrote the question here
p.s. 2 In spite of I didn't work in CS4-CS5 cause it were not comfortable in my opinion....now I wanted to test "save for web" in CS5. Trouble is the same even during one session:
1. Run CS5
2. Create new document
3. Save for web - CS5 offer "My Dociment", change it to "disc D" - save - ok
4. Shut down, run CS5 again
5. Create New, or even Opened old saved file to disc D (for example from step 3) - CS5 offer the way "My documents" again
I hope this my explanation was more clear to understand

Best Color Management Settings for Web in CS3

I've seen tons of info on what color management settings can be used in CS3, but most seemed to favor work for printing. I'm just wondering what settings people think are best for color and B&W photo web work in particular... I already have both the monitor and PS set for 'sRGB IEC61966-2.1', but other than that, there seems to be a lot of opinions. I just want everything to have the best chance of looking the same on other comps as it did on mine. I also have Proof Setup set to 'Monitor RGB'.
Thanks,

1. Calibrate (I use ColorVision's Spyder http://aps8.com/spyder.html , but any hardware calibration device will be better than calibration by eye).
2. Set the Working Space to sRGB.
3. Set the Color Management Policy for RGB to Convert to Working to be sure you are converting content to sRGB. (2 & 3 addressses pfigen's concern about making sure all images are sRGB.)
4. Make sure your monitor is set to use the ICC profile generated by the calibration device.
5. Turn off Proof Colors.
6. Embed profiles or not, but if you do use the sRGB profile. Whether it gets used or not is another story.
As far as B&W, pfigen suggests Gamma 2.2, which would seem to be right for PC. Mac users might consider Gamma 1.8.
This should work well for most situations, but guaranteed consistency is an impossible task at this point.

Color managed workflow for web and camera raw

I recently calibrated my monitor and was wondering what is the preferred workflow for the web? I shoot with my camera in sRGB and my working space in Photoshop is sRGB aswell. The problem that has arised now is that the color managed colors in Photoshop are way different than the non-color managed in my web browser. Is this normal? And what I don't quite get is how a photo that has an embed sRGB profile looks the same in Firefox (that understand embed profiles) and Photoshop, but in Google Chrome (that does not recognize embed color profiles) shows the colors very differently, although the browser should understand the photo is in sRGB by default and show the same colors that are in Photoshop, right? So what happens here, because the colors are not the same? What information does Photoshop assign to the embed color profile that makes the colors so different?
Anyway, I assume the problem here seems to be my newly calibrated monitor profile. The only way I can get the same colors to my photo in Photoshop and to a photo in web is to use soft proofing set to my Monitor RGB AND save without a color profile. Is this the way to go? But here comes another problem. I shoot in RAW and use camera raw to edit my photos. Camera Raw doesn't allow soft proofing, so I'm stuck with these color managed colors that are so different from non-color managed colors I get in my browser that any color correction in Camera Raw is simply useless. Unless everyone was using color managed browsers and I could start to use fully color managed workflow, but that's not the case I suppose. So, what's the solution here?

First off, you need to be working in sRGB, or converting to sRGB when you save out files that are destined for the web. You can change the color space that Camera Raw (ACR) send your raw files to by clicking the blue text in the bottom center of the ACR window. This is probably that safest workflow for you until you get a handle on color management. If the color of your images is very important, you might consider embedding a color profile in them, which will help color managed browsers render your color properly.
If your display's color gamut is different than sRGB (many are), you'll find matching colors for non-color-managed browsers to be impossible. But consider the average display and take heart. The best you can do is correct to a standard and hope for the best.
Both the convert to sRGB and embed color profile options are in the save for web dialogue box.
More about the ACR workflow options here:
http://help.adobe.com/en_US/Photoshop/11.0/WS739D7239-24A7-452b-92F9-80481C544F25.html
More about matching colors for the web:
http://help.adobe.com/en_US/Photoshop/11.0/WSB3484C68-ECD2-4fa4-B7CC-447A5FE86680.html
http://help.adobe.com/en_US/Photoshop/11.0/WSD3F5E059-4F51-4b44-8566-13B854D3DF5F.html
http://help.adobe.com/en_US/Photoshop/11.0/WS0B3CD652-4675-44be-9E10-445EB83C60BA.html

Color Trouble - Save for Web

Hi,
When I save for web and devices in Illustator and then open the html document in Dreamweaver, the colors of my document appear VERY washed out. In AI I have the RGB set to sRGB and the color mode set to RGB.
Could someone suggest what might be happening here?
Thanks!!

When you import a file you want to import an RGB file with a RGBs profile and you want to know that so that you can change it. If you have color management turned off you will not know what happened and it will not match.
Unless you take the time to make everything match then it will not work.
So any place image or file should be RGBs the document should be RGB and the color settings should be RGBs. If you place an image that is Adobe RGB 1998 and the your settings in AI is RGBs then there will be a change in the color and this is expected but not a wanted result. By embedding you are forced to go back convert the profile to RGBs in Photoshop then replacing it in Illustrator, this allows you to correct any difference there is so you can know what it looks like when place in Illustrator otherwise Illustrator will convert it to RGBs when save for the web but without any adjustments.
So yes I say they are wrong.

GIF/Save for Web problem (PSE 7)

I've tried searching for an answer to this problem but nothing seems to address quite what's happening.
I recently had to replace my laptop, and switched from Windows XP to Windows 7. I transferred PSE 7 from the old system to the new system, and have had no trouble with it- until now. I have a 52-layer Photoshop-format image that I would like to save as an animated .gif, with each layer as a different frame. File >> Save As has the option to save Layers as Frames, but if I check it, then click "Save", nothing happens. Nothing at all. On my old system, I'd get a new dialogue with options like quality, duration per frame, loop, etc, but that's not happening anymore, and nothing saves (if I go to find the new .gif file, it's just not there). If I DON'T choose "Layers as Frames", the .gif dialogue comes up just fine, and it has no trouble saving as a static .gif. But it seems that it's just refusing to save it in animated format.
I'm having the same issue with "Save For Web". Neither the file menu option or the keystroke command will bring up the dialogue to let me save it that way. It thinks for maybe a second, but then doesn't do anything else, and doesn't save the image.
I've already tried resetting the layout, just in case the dialogue box was shifted somewhere I just wasn't seeing, and I tried resetting the Save For Web preferences, but neither of those things worked. Any explanation as to why an animated "Layers as Frames" .gif is the only format that isn't saving properly?
I've also tried opening old animated .gifs that I created with XP, and they will not re-save as animated .gifs either. I get the "Do you want to save the changes made" dialogue, but clicking "Yes" doesn't do anything and doesn't save the updates. I'm at a complete loss for why this function no longer works.

Glad you got it working.
It takes some getting use to the differences between xp and windows 7
in regards to permissions and all that stuff. Even when you install
programs on an administrative account, problems still persist sometimes.
What i do is always install programs by right clicking on the installer and
choosing Run as Administrator even when installing on an account with administrative
permissions. I seem to have less problems doing it that way. Anyway, just something to
keep in mind for the future.
MTSTUNER

Using Illustrator CS6, how to preserve drawn colors when Save For Web to PNG?

Using Illustrator CS6 on Mac OSX 10.9.1:
step 1. I open a new file for Web profile.
step 2. I verify that File > Document Color Mode is RGB.
step 3. I draw a square and set it's color to 0,103,197 (decimal).
step 4. I click File > Save For Web
step 5. In the popup that opens, I set to PNG-24, and verify the option Convert To sRGB is not selected.
step 6. Using the Mac's DigitalColorMeter, I observe the color is 0,109,191 in the Save For Web popup. If I save it, then open the saved PNG file, it's color is also 0,109,191.
How to do this so the colors don't change?
step 7. I close Save For Web popup.
step 8. I verify Edit > Color Settings for Working Spaces is set to Monitor RGB, and that the Color Management Policies for RGB is off.
step 9. I verify Edit > Assign Profile is set to Don't Color Manage This Document.
step 10. I verify View > Proof Colors is off.
Can anyone provide a set of Illustrator CS6 settings that let me save a PNG image with the same colors it's drawn in so I can use that PNG image in a website?
I must be missing something obvious, because anyone working in web design must do this day in and day out, please let me know what procedure people follow to achieve this.
UPDATE:
Using the above procedure DOES preserve the colors when embedding the PNG image in a webpage viewed in Firefox and Chome, but NOT for Safari. Also, the colors are not preserved in Mac's Preview software, as well as Microsoft Office 2011 for Mac.
I'm pretty new to all this. Hoping someone can provide some perspective on what typical procedure people use for web development when working with colors in Illustrator CS6.

Using Illustrator CS6 on Mac OSX 10.9.1:
step 1. I open a new file for Web profile.
step 2. I verify that File > Document Color Mode is RGB.
step 3. I draw a square and set it's color to 0,103,197 (decimal).
step 4. I click File > Save For Web
step 5. In the popup that opens, I set to PNG-24, and verify the option Convert To sRGB is not selected.
step 6. Using the Mac's DigitalColorMeter, I observe the color is 0,109,191 in the Save For Web popup. If I save it, then open the saved PNG file, it's color is also 0,109,191.
How to do this so the colors don't change?
step 7. I close Save For Web popup.
step 8. I verify Edit > Color Settings for Working Spaces is set to Monitor RGB, and that the Color Management Policies for RGB is off.
step 9. I verify Edit > Assign Profile is set to Don't Color Manage This Document.
step 10. I verify View > Proof Colors is off.
Can anyone provide a set of Illustrator CS6 settings that let me save a PNG image with the same colors it's drawn in so I can use that PNG image in a website?
I must be missing something obvious, because anyone working in web design must do this day in and day out, please let me know what procedure people follow to achieve this.
UPDATE:
Using the above procedure DOES preserve the colors when embedding the PNG image in a webpage viewed in Firefox and Chome, but NOT for Safari. Also, the colors are not preserved in Mac's Preview software, as well as Microsoft Office 2011 for Mac.
I'm pretty new to all this. Hoping someone can provide some perspective on what typical procedure people use for web development when working with colors in Illustrator CS6.

How differs soft proofing in View - Proof Colors and Save for Web - Preview?

Hi, I'm currently confused with one inconsistency. My working space is Adobe RGB and I use calibrated monitor. After I finish my work on image I go to View -> Proof Colors -> Internet Standard RGB. Image looks terribly with the overall violet/purple hue. Then I open Save for Web dialogue, I check Convert to RGB and from Preview options I select again Internet Standard RGB. Now the previewed image looks as expected. The same results I get if I manually convert image to sRGB before soft proofing and saving for web. So... what's the difference between preview in Proof Colours and in Save for Web? Thank you for your opinions.

Hi 21, thank you for your input. All what you say makes perfect sense, it is exactly how it should work and how I expected it works. My problem was, that while testing this theory in practice, I have come to different results. I expected, that if I stick to the theory (meaning keeping in mind all rules you perfectly described) I should get the same result in both soft proof and save for web preview. But... it was not the case. Save for web preview offered expected results while soft proof was completely out of any assumptions and colours were totally over-saturated with violet/purple hue. Also, Edit -> Assign Profile -> sRGB gave another result then Soft Proof -> Custom -> assign sRGB (preserve numbers), but the same as save for web preview. What troubled me was why this is so.
Today I've made tests on hardware calibrated monitor and... everything works exactly as you describe and as I expected.
Then I went back to another monitor which is software calibrated (both monitors are calibrated with X-Rite i1 Display Pro). And again... I received strange results described above. So I did the last thing I thought and disabled colour calibration on that monitor. And suddenly... both soft proof and save for web preview gave the same result.
Probable conclusion: soft proof and save for web preview (together with Edit -> Assign Profile) are programmed to use different algorithm which is evident on standard gamut monitors with software calibration. Question can be closed.
Gene and 21, thank you for your effort.

Photoshop slice tool and Save for Web image quality. Will it affect prints?

I want to slice a large photo into multiple smaller (4x6) printable photos to arrange in a 12x12 inch scrapbook binder pocket (made of of 4x6 pockets). I need to order separate 4x6s online so tiling in the print options is not what I need.
The slow way I know to do this involves cropping and saving each section (maybe even recording this action to do batch processing). However, another way is to use the slice tool to quickly divide up the sections then "Save for Web...". I can adjust some parameters, but I'm afraid there are other automatic adjustments that I don't want. For example, all images are converted to 96 dpi instead of the original 300 dpi. The number of pixels remains the same so I don't think there will be problems printing the picture.
My question is: does the Save for Web function reduce image quality in any way when printing (it is obviously intended to be used to optimize images for websites)? Are there settings in "Save for Web" that would optimize for high quality prints? Is there a better way to tile an image?
I have not yet compared any prints.
W7
CS6

If you understand that something will do something you do not want like convert to 96 DPI as long as it does not resample you can always convert back to 300 DPI. If you want 6 4x6 to form a 12x12 you must start with an square 1:1 aspect ratio image. That you resample to 12"x 12" at 300 dpi if you want 6 4x6 300 dpi images.
If the original images vary in size and aspect ratio you need to crop them square or add two borders to make them square. The rest is easy to do with an action.
The square crop or border can be automated with a little scripting. If crop a center crop would be the route to go. My crafting actions package contains more the a dozen scripts to be used within action. One is a plug-in script that would make center cropping a snap two steps menu File>Automat>AspectsRatioSelection followed menu Image>Crop. Add a menu Image>Size set side to 12" and resolution 300 DPI and you have your starting 12"x12" 300 dpi image.
Flatten the image make your first 4"x6" selection copy past to add it as a layer. Select the background select the next 4x6 area copy and paste repeat that process till you have added the 6 4"X6" layers. Then delete the background, Select all, target all layers and use layer>Align layers to selection>Top edge then repeat align to left edge. the Image>Trim you have your 6 4x6 in a stack. You can the use Adobe Photoshop Script Export Layer to file. All automated in an action however the last step Export layers to files is interactive for its not a plug-in script. So if you batch it you keen to hang around to interact with the last step for each image.
You could also write you own export script that would not need human intervention to use instead of Adobe interactive script.
Crafting Actions Package UPDATED Aug 10, 2014 Added Conditional Action steps to Action Palette Tips.
Contains
Action Actions Palette Tips.txt
Action Creation Guidelines.txt
Action Dealing with Image Size.txt
Action Enhanced via Scripted Photoshop Functions.txt
CraftedActions.atn Sample Action set includes an example Watermarking action
Sample Actions.txt Photoshop CraftedActions set saved as a text file.
More then a dozen Scripts for use in actions
Example
Download

Save for web problem for transparent gaphics

hi!
savng any transparent graphic in " save for web&.." the transparancy of original file is shown much more opaque/darker and so it will save in png file.
iattached file where you can see red box with 40% opaciy , but when opened in save for web it looks more like 60% opacity.
i found solutions of some problems for color shifting in save for web , but none of them solves my problem.
Any ideas?

All is not as hopeless as it seems just a bit hidden in CS 3 and earlier in CS 4 the mystry was brought to the frnt though not really document as far as I know.
The problem is simple to correct and has a logical reason why it is manifesting itself this way.
In CS 3's Save for Device and Web there is a small triangle at the top left had corner on the image display window that offers you a choice between the default and the problem uncompressed color, Macintosh color, Windows color and Document Color Profile which is what you are looking for since that is what you expect to match.
There is also the option to convert to sRGB which what the web basically displays well. Which is located on the upper right corner of the dialog also a drop down.
I hope this helps you find your way it used to drive me a bit crazy myself till I took a really close look at the dialog.

Help Save for Web problem PE9 default gif setting

I have a 64 bit PC with Windows 7. PE9 and problem is when I "Save for Web" as a jpg....everytime I save a file it defaults back to the gif everytime. I want the default to be JPG!! I never use gif for anything. Pain in the rear to change the drop and setting to jpg everytime. I have a call tag in with no help yet, and have reinstalled PE9.Thanks in advance. Ray

It’s usually due to incorrect permissions settings on the OS.
Open Windows Explorer and navigate to:
C:\Program Files\Adobe
Locate the Photoshop Elements 9 folder (the one with the blue PSE logo)
Right click on that folder and choose Properties - then click the security tab and make the following changes:
1. Click on the edit button to change permissions.
2. Click Add and type the word “Everyone” in the Object names Box (without the quotation marks) and click OK.
3. Under group/User Names select everyone so that it becomes highlighted.
4. Put a check mark in the box against Allow Full Control and click Apply.
N.B. for Windows 64 bit navigate to Program Files (x86)
PSE should now remember you last settings rather than reverting to the default settings.

Photoshop CS3 color management "Save for Web" problem

Similar Messages

Maybe you are looking for