Photoshop CS3 editing does not work in LR 2.0

Just upgraded to LR 2.0 and did the data base conversion everything works just fine. Btw, I did keep the LR 1.4 installed because I wanted to make sure I have a fallback in case I have a problem with LR 2.0.
I do however have a problem. I cannot edit images in Photoshop CS3. If I select any of the Edit in Photoshop CS3 menu options, CS3 fires up but no image is displayed in Photoshop. I did upgrade CS3 with the latest upgrades available from Adobe. I have no problems editing in CS3 under LR 1.4.
Any suggestion what may cause this?

Mea culpa - I was eyeballing the forum but the word "export" did not ring a bell for the problem I am facing. Thanks for pointing me to the thread covering the problem.

Similar Messages

  • Adobe Photoshop Elements 12 does not work with Yosemite 10.10

    My Adobe Photoshop Elements 12 does not work with Yosemite 10.10 nor does my Premier Elements 12. When I try to start them up I get the error message. After uninstalling and reinstalling a few times its still the same. Strangely enough PSE 11 seem to work with Yosemite.  I uninstalled my Premier Elements as well and it behave the same way. How do I get a new copy of Premier Elements 12 to reinstall?

    Just to further test what is happening to my iMac on Yosemite is I downloaded the trial version of Photoshop CC and when I go to launch it it gives mr the same error message as when I try to launch PES 12 or Premier Elements 12. So whatever the problem is it involves all three and so upgrading to Photoshop CC doesn't even help.  Could there be an Adobe file damaged or missing somewhere that is common to these and yet does not effect Revel and Lightroom?

  • Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in

    Opening my Photoshop Elements 11 does not work. I always get following message: "Could not open a volume of work, because the file is locked or you do not have the required permissions. Undo the protection of the file on using the command 'Properties' in Windows Explorer." What is wrong? I cannot unterstand what I have to do!

    Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
    Mylenium

  • I have just downloaded Yosemite but I find that Photoshop Elements 11 does not work properly. If I use a tool like a paint brush or spot healer I cannot paint a full stroke?

    I have just downloaded Yosemite but I find that Photoshop Elements 11 does not work properly. If I use a tool like a paint brush or spot healer I cannot paint a full stroke does anyone else have this issue or know a solution?

    Many thanks that does work. But it now leads to another question is this simply a trackpad issue and if so will it be fixed? I use Elements every day and was thinking I would have to go back to Mavericks.

  • External editing does not work in LR4 (??)

    external editing does not work in LR4 (updated from LR3 a few days ago)
    has anyone an idea to solve this problem?
    Thank you.
    Regards
    Priska

    priskaleutenegger wrote:
    no ..
    when I send the RAW Document for external editing (Elements 10) nothing happens at all ... zero :-(
    a friend of mine has the same problem - also updated from LR3 to LR4, external editor: elements 10
    Which process version is the image you're trying to edit externally? 
    You right-click (I'm assuming PC, can't help Macs), there should be a context menu option "Edit in".  You choose that, and there's an option for Elements 10 or not? 
    If so, what happens when you select it?  Do you get any further message?
    If not, you may have to go to Edit menu, preferences, External Editing tab and create a preset for Elements.  In the "Additional External Editor" area, click "Choose" and navigate to wherever Elements is on your machine and you can create a new external editor. 

  • Sharepoint 2013 list view quick edit does not work with out remote API permissions

    sharepoint 2013 list view quick edit does not work with out remote API permissions.
    When I give Use Remote Interfaces  -  Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site it works which is not an ideal situation..
    MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

    This is true. If you use Fiddler to watch the requests from the list view quick edit you can see CSOM calls. For example when changing a value in a cell, when you tab out you will see the SetFieldValue and Update method calls on the list item.
    Blog | SharePoint Field Notes Dev Tools |
    SPFastDeploy | SPRemoteAPIExplorer

  • Bridge CS3 "Edit Find" not working after optimizing cache.

    Power PC G5
    Mac OSX v.10.4.11
    3GB RAM
    Photoshop CS3
    After optimizing the cache, my Edit>Find feature does not work. I looked into the Bridge Preferences and could not find anything under Thumbnails or Cache that can turn it back on. Please advise.

    Make sure you have Bridge 2.1.1.9.
    Purge the cache for each folder through the Tools menu in Bridge.

  • My serial number for Photoshop Elements 7 does not work.

    I downloaded Photoshop Elements 7 but my registered serial number does not work.

    Error "The serial number is not valid for this product" | Creative Suite

  • Cs3 liquify does not work

    my liiquify does not work  help please

    You need to tell us a lot more than that.
    What exactly are you doing?
    What kind of file format?
    What size and mode?
    Also:
    Operating System/version
    Photoshop version number
    Amount of RAM installed
    Hard drive(s) capacity

  • Photoshop cs3 Trial is not Working!

    Okay, I've downloaded the cs3 30 days trial. After installation, i launched it and it said 'problem with trial...a problem was encountered while trying to load the trial period for photoshop cs3.' What does this actually mean? What should i do?

    Hi Kirill,
    Could you please check the Photoshop version?  In Photoshop, please go to the Help menu and select About Photoshop...   In the dialog, it will say "Version" followed by the version #.  The Reflow PS Plug-in is activated in Version 14.1. 
    If you have a lower version, such as Version 14.0, please close Photoshop, and open the Adobe Creative Cloud application and click on the "Apps" tab.  If you see an Update for Photoshop there, please install it.  If not, please quit Creative Cloud (select the "gear" icon in the upper right of the Creative Cloud and and choose Quit Creative Cloud).  Then restart Creative Cloud, and hopefully the Update for Photoshop will be available.
    If this doesn't resolve the issue, please respond here and we'll look for another resolution.  Sorry it's not working for you right away!
    -Nick

  • Photoshop Elements 10 does not work properly, won't open; Error:213:11 ; What does that mean?

    I've downloaded and installed my version of PS Elements, but while I try to open it, it stops working as an error accurred. Error:213:11
    I don't know what I did wrong while I got all my licences...

    Well, this is not working either. There is no such folder and I wonder why. Otherwise I would have tried this before.
    Guess my version's too old? I tried to run on my Win7 and the data is from year 2011.
    Though I re-installed it but still there was no SLStore-Folder on my PC. It's a bit strange though and I cannot update the program while it's not working.

  • Edit in 'Photoshop cc 2014' does not work from Lightroom

    I've recently upgraded to Lightroom 5.5 as well as Photoshop CC 2014.  I'm having trouble trying to edit a photo from LR to PS.
    Using the right click option - 'Edit in Adobe Photoshop CC 2014' opens up PS with no image to edit.
    Please advise.

    Mac:  https://forums.adobe.com/message/6470671#6470671
    Win:  https://forums.adobe.com/message/6473403#6473403

  • Photoshop Elements "Edit" does not open

    The "Edit" option in Photoshop Elements no longer opens (the "Organizer" option still works ok.)
    Suggestions?
    Sandy

    On the drive on which you have installed PSE,on my machine it is on C:
    Go to c:\Program Files\Adobe\Photoshop Elements 9\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
    Now launch PSE and check if it works.
    Alternatively,
    Try resetting the PSE preferences by
       1. Close Elements.
       2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Edit.
       3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
    - Disable any anti-virus software just to confirm if it is not blocking PSE Editor.
    In case any network printer is attached try to launch without network or printer uninstall.
    try and let me know your comments.
    -Garry

  • The deactivation option on my copy of Photoshop CS5 64  does not work.  How can I get this deactivated so I can re-install?

    when I try to deactivate Photoshop no deactivation screen comes up.  I want to reinstall on my PC after a complete system clean and reinstallation of Windows so I really need to get Photoshop deactivated.  I'm at a loss as to how to make contact with any support person at Adobe to get this done.   be gratefully received.

    I went through this a couple of years ago when I built a new desktop. I needed to move my copy of PS CS5 to the new desktop and couldn't get the Deactivate system to work. I had installed PS CS5 on 2 different computers, older desktop and newer notebook.
    After calling Adobe, IIRC (that was when you could actually call them), I was told not to worry about it. Just uninstall from the old computer, and or Don't Ever Use CS5 on the old computer again, and install it to the new one. I didn't have any problems. Activation went through without any problems.

  • Contacts Add and Edit does not work

    Recently I find that I am unable to Add ot Edit a contact. All other functions of the BB are working fine. The BB & the BES account have both been reset in a hope to solve the problem.
    Does anyone else have similar issues and have a solution for the same?

    This is normally caused by a bad release of the updates of RIM's IM apps (Windows Live, Gtalk, Yahoo) - you need to delete them and reboot your phone

Maybe you are looking for

  • Sony V1U Not Capturing HDV in FCP 6

    Hi all I am running FCP 6.0.2 on a Dual 2GHz PPC G5 running OSX v 10.4.11 I shot some footage on a friend's Sony HVR-V1U in 1080i. I used the 1080i 60 easy set up to create a project in FC and the log and capture window never sees the camera. I check

  • Issue in downloading the file to application server (background)

    i am downloading the PIR records to the application server. the program is running fine . i m using background coz i m downloading large no of records (>5000) my actually target is 28000 records.  we are spliting it up into atleast 7000 records at a

  • Life Simulation ~~ Lost in Too many Else/If clauses ~~ Weird Exceptions :)

    Hello I decided to code the "Simulation of Life" problem (It is such a common sense algorithm, I feel if I write down the rules here I'll be flamed for assuming readers are not educated enough :S ) My String array is a 20 by 20 area. Living cells are

  • Help required for fieldnames

    Hello friends. I am writting a report on 'TDS on contractors payment ' In this report i am using 12 fields to display in the output . I am able to find 9 fields  and displayed them in the output .  Problem is of only 4 fields. Please help me to find

  • 2 JApplets in One

    Hello I want to ask this: I have 1 Japplet working, this JApplet build some parameters that need the 2nd Applet, so my question is how can I pass the parameters to the 2nd applet and start the 2nd applet in the same screen of the first (without closi