Photoshop CS3 Extended wont boot in Tiger

Hi, I am helping my friend to sort out some problem. Would appreciate all your expertise.
At present, my friend uses a iMac and is ready to install a Mac OS X Photoshop CS3 Extended Academic Edition.
However, as I load the DVD into the iMac, it just spins but does not load.
Thereafter, it spits out the DVD.
WOuld like to know if anyone encounter this?

Make sure the disc is clean and free of dust and finger prints.

Similar Messages

Error "Licensing for this product has stopped working" when starting Adobe Photoshop CS3 Extended- XP Pro AMD; 2GB RAM

I have exhausted all known options thus far.
I started the Flexnet Licensing Service and restarted the system but the message continues to come up when lanching PS CS3 extended
After restarting computer the Flexnet Licensing Service stops again and goes into Manual mode. This also happens after a few minutes without restarting.
I also downloaded the Flexnet Licensing Recovery Kit from Adobe Support but the file stops after saying "please wait for a few moments.. ?"
I changed the setting as discribed for the Flexnt folder but the message continues to come up when PS Extended CS3 is launced.
http://kb2.adobe.com/cps/401/kb401528.html
What else is there to do. Please help me as what I can do so I can continue to use Photoshop CS3 Extended.
Thank you

I downloaded the clean Script file and followed the instructions from what the Clean Script read Me file described. The first step said to deactivate. Although I was not able to deactivate because of my original message, I followed the remaining steps.
After using the Clean Script and uninstalling Photoshop CS3 Extended and re-installing it I re-booted my computer. I also deleted the CS3 Application data files.
When I installed PS CS3 Extended the installer does not ask for the serial number on all attemps. I bought a registered copy of PS CS3 Extended. Is there another way to approch this licensing error.
Thanks.

I have Photoshop CS3 Extended and use it on my Windows PC Having bought a Nikon D5200 I have been unable to use the camera on the raw settin g with Photoshop.I have downloaded the Camera Raw 8bi dowload as advised but my computer Windows 7 will not recogn

I am having difficulty opening raw images with my version of photoshop CS3 extended. I have a Nikon D5200 which according to adobe it is supported but when I try to download a camera raw patch 8bi it wont recognise the file format.Can anyone offer a solution which will enable me to use photoshop with my D5200 when shooting in raw? I have windows 7 operating system.

Thank you for your help I have already downloaded ACR 8.7 and tried to download DNG converter will have to back track on this as didnt recognise the file when I downloaded it. is the problem now that I need to change my files to DNG from NEF files before opening in photoshop?
Please be patient as I seem to have got the jist of the problem but not sure the converter is on my computer what should I be looking for?

Photoshop CS3 Extended crashes on MacBookPro

Photoshop CS3 Extended crashes on MacBookPro
I'm working on a MacBookPro Intel Core 2 Duo 4GB RAM OSX 10.5.2 Eng
The software is Photoshop Extended 10.0.1 and a Creative Suite 3 standard is also installed (Photshop is not installed because I've already had the extended version, both english versions)
Photoshop crashes very often and it doesn't save in psd file format. In that case the message is 'Could not save 'xxx' because there are too many files open. Try closing some windows and try again.'
When I choose New Document an error appear 'Can't read the document presets file.
When I choose a new Workspace the error is ' The command "Select" is not currently available'
Can't work!...any suggestions?
Giuseppe Andretta

Giuseppi,
Some followup thoughts...
25GB scratch disk is quite small. RAM may not have changed, but it's possible it's not seated correctly or that it is not working properly.
Booting off your System disk's Disk Utility and then booting off the DiskWarrior disk and running repairs should be standard/routine maintenance, and should be run anytime your system is not "quite right". And they should be run immediately before any system or application updates. And then repeat Disk Utility right after.
Most of us cannot read crash logs.
Neil

Cannot Activate Photoshop CS3 Extended???

Hi,
I cannot activate my copy of Adobe Photoshop CS3 Extended, after coming across a previous thread regarding this issue (Re: CS3 Retail Box. Key Won't Work) I contacted support but after 3 representatives they all claim to not be able to validate the keys (despite one still being in use on my wife's laptop!). I just want to deactivate the keys from the previous 2 PCs so I can install them on my newer machines, my old pc has been formatted without deactivation so I cannot do it myself and I am scared to deactivate the other copy as It seems I will not receive any support in reactivating it.
Here is a complete conversation with one of the 3 support representatives I have spoken to regarding this issue:
Thank you for contacting Adobe.
A representative will be with you shortly.
Thank you for your patience.
While you wait, you can try our community forums where experts are available 24 hours a day, 7 days a week.
You are now chatting with Vijet.
Vijet: Hello. Welcome to Adobe Technical Support.
mike stripling: Hi, I have here 2 keys for Adobe Photoshop CS3 extended edition which are telling me there is too many activations on them
Vijet: Hi Mike,In order to assist you in a better way can i have your Name your Email id and your Phone number please.
mike stripling: one of them was on a pc which has been formatted without deactivation and the other is on my wife's laptop which also needs deactivation as that will be formatted soon
mike stripling: Mike Stripling, [email protected] and I'm not sure which phone number it would be under
mike stripling: (it was registered 7 years ago)
mike stripling: I have spoken to two previous representatives who claim my keys are not valid yet after downloading cs3 from your website instead of installing from a disc it says for both keys that there are too many pcs using them at the moment
Vijet: Can you please provide me with the Serial Number for your Photoshop CS 3
mike stripling: [removed] & [removed]
mike stripling: Your previous representatives claimed this did not show on their system
mike stripling: but when I put it in photoshop it claims there are too many pcs using those keys
mike stripling: I can screenshot this if necessary
Vijet: Sorry to say Mike but the Serial Number you are giving me are invalid one's.
mike stripling: No they are not.
mike stripling: Why else would I get a big green tick and a page showing 'too many activations'
Vijet: Please allow me a moment while I look into your account and see why are you having this issue.
mike stripling: Ok.
mike stripling: I also found this support thread with your adobe staff responses on this issue which may be relevant: https://forums.adobe.com/thread/1491813
mike stripling: "CS3 can not be activated any more as it is end of life product, you can contact Adobe Support at Adobe - Contact Support – Download and Installation to know how to proceed for it & know about the options if there are any. Regards Rajshree"
Vijet: The serial number you are giving me are not the valid one,i have looked into my resources.
mike stripling: https://i.imgur.com/GRdHQmc.png
mike stripling: then why do I get this?
Vijet: May be Mike the Photoshop we are talking about is CS 2 not CS 3?
mike stripling: the screenshot I just linked is cs3 and the disc with the serial numbers, box etc all says adobe photoshop cs3 extended
Vijet: Because end of life of the product you are saying it's for CS 2 products not for the CS 3.
mike stripling: your staff post says cs3 as well
mike stripling: clearly stated in this thread https://forums.adobe.com/thread/1491813
Vijet: Allow me a minute let me look into it.
Vijet: From where did you purchased it?
mike stripling: It was years ago, but I believe amazon or something
mike stripling: I don't have the purchase order saved, who would save that for 7 years? :S
Vijet: Sorry to say Mike i wont be able to help you with this.

i am not an adobe employe and not an adobe spokesperson.
but my guess is it appears to adobe as if those keys have been 'hacked'. ie, published somewhere publically, used by others and are now blacklisted.

IPhoto & Photoshop CS3 extended

Hello everyone, I have a question related to Photoshop, I figured this would be a good place to find an answer. In photoshop CS3 extended, using the magnetic lasso to extract part of an image, after I extract the image, how do I put it somewhere else? I cannot find an answer to this anywhere on the web, so I thought I would try here, if anyone has the answer please help, I am really trying to figure this out before I drop the cash to buy it, I am on the free trial right now and the magnetic lasso feature is the only reason I want it. Thanks

After you select the area you want with the magic lasso, do a Command-X (cut) and then Command-V (paste). Change to the arrow cursor mode and click and drag the area you selected to wherever you want it. A new layer will be created with the cut and pasted area in it.
If you're considering PS CS3 just for the lasso feature you might consider Photoshop Elements 6 for Mac. It has the same lasso feature and about 80 % of CS3's features at 1/7 the price. I wouldn't get CS3 for just that.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Adobe Photoshop CS3 Extend Error

I had to re install Adobe Photoshop CS3 Extend but now every time I try to start it, it errors out withe the following:
"Could not load the user measurement data point presets file because the file name was not valid."
and "Could not load the user measurement scale presets file because the file name was not valid."
Any assistance would be appreciated. Thanks!

(no reinstalling doesn't reset the preferences...) :)

Bridge not functioning in PhotoShop CS3 Extended

I deactivated Photoshop CS3 on a computer I was no longer using and installed it (CS3) another computer. I activiated CS3 on the new computer. However, when trying to use Bridge, I get a message that says that Adobe no longer supports Bridge Home and Bridge does not function on the new computer. Is there anything I can do to get Bridge to function as part of CS3 Extended?

Thanks, that worked.
In a message dated 12/28/2011 10:13:56 P.M. Eastern Standard Time,
[email protected] writes:
Re: Bridge not functioning in PhotoShop CS3 Extended
created by Curt Y (http://forums.adobe.com/people/Curt+Y) in Bridge
Windows - View the full discussion
(http://forums.adobe.com/message/4107610#4107610)

I am getting an error message when installing Photoshop cs3 extended on my Mac!!!! Please help

Error message when installing Photoshop cs3 extended on my Mac!!!! PLEASE HELP!!!

check compatibility first, http://roaringapps.com/apps:table

Adobe Photoshop CS3 Extended on Windows XP Professional

Topic: Selecting
I have been using Photoshop Elements 4 until I just purchased Photoshop CS3 Extended. In Photoshop Elements 4 there is a selection brush, enabling you to make pixel by pixel selection (if desired). There seems to be NO counterpart in CS3 - - which seems impossible for so powerful a program. In that most of my work involves selecting very precise points of 1 or 2 pixels, how can this be done?
Please help.
Thank you

Dave Milbut:
Thanks so much for responding . . but, unfortunately does NOT work again! I did exactly as you suggested in that I made a selection fir so that I could get a quick mask. When I double-clicked on quick mask in the tools pallet, NO options appear that say "Paint on selections" nor "paint on mask". The options is get are "Color indicates Mask Area or Selected area" and you have to chose one. The only thing you are actually choosing is whether you want the color to appear on the mask you chose or inversely to appear on the remainder of the object. The "black" brush remains the same and does not change.
If I do not learn how to make minute selections (so that I will be able to act on only tiny tiny areas) I will not be able to use this program after spending a million dollars for it. It looks like Adobe could make something so fundamental (available in Elements) available here.
Could you help me further . . . PLEASE !
Thank you.

Adobe Photoshop CS3 Extended Trial

Hi guys, I've recently downloaded Adobe Photoshop CS3 Extended. When I select the trial period for 30 days instead of buying the product, it says that Adobe cannot continue and it's having trouble loading the trial. I reinstalled it and restarted my computer, like it said, and nothing worked. Please help, I cannot afford Adobe Photoshop CS3 Extended right now, and I do not support piracy at all.

I've tried to install the program from a different directory, I think my windows installer is crashing every time i try to install it, maybe I find a working hotfix for it.
I followed these steps when i tried to install ps:
http://666kb.com/i/b1qwvm0mq1zs8iekm.jpg
First I downloaded it to C:~~/Downloads (1.)
Then I extracted this file to C:~/Desktop (2.)
Afterwards I got these files (3.)
After clicking on setup.exe this window (4.) appears and disappears right after
Danke für die bisherige Hilfe
aus der Alpenrepublik
Fabs
/edit:
To unregister and register the msi hasn't solve my problem.
Now I am trying to run the sfc /scannow command.

Adobe Photoshop CS3 Extended Activation Problem

Hi all, hoping someone can help me.
I have a legitimate hard copy of Adobe Photoshop CS3 Extended which was only recently taken out of its sealed package.
On installing and trying to activate I get an error. Now i am left with a window telling me "Registration Unsuccessful"
Any ideas how i can go about solving this? I legally own this copy and I need to use it and can't do with it deactivating.
Thanks in advance for any help given. It's very much appreciated!

Mordynak I am sorry but I find no software titles registered under the Adobe ID/e-mail address you used to post to this forum. From this discussion it sounds like you have already utilized the process listed in Find your serial number quickly.
Please contact our support team directly at Contact Customer Care. If this link still fails then I would recommend utilizing a different web browser as the current add-ons, security settings, add-ons may be preventing a chat session from being made available to you.
If you continue to face difficulties then please update this discussion.

Adobe Photoshop CS3 Extended freezes on startup under Windows 7 Ultimate 64-bit - No splash screen

I installed my licensed copy of Adobe Photoshop CS3 Extended today as part of my install a bunch of software after a reinstall of Windows (due to viruses). I did a completely fresh install of Windows 7 Ultimate 64-bit. I've used Photoshop CS3 Extended for quite a while now so I know what to expect on startup but it was previously installed under Windows XP Professional (32-bit). Figured I would give Windows 7 a chance this time around.
Google searches aren't turning up anything. When I attempt to start the application, I get a window with the title "Adobe Photoshop CS3" (no "Extended" - I seem to recall the title changes later) and the toolbar appears. However, no splash screen appears and no Product Activation wizard appears - the application simply freezes on an empty frame and a toolbar. I've tried running Photoshop as Administrator (right-click, "Run As Administrator"), but nothing changed there. I tried uninstalling and reinstalling. I tried upgrading to CS3 10.0.1. Nothing works. The application simply freezes before it gets anywhere.
I tried calling Adobe Support since this technically falls under installation issues but their phone support systems are down today. Go figure.
Edit: I hooked into Photoshop with the Visual Studio debugger and every single thread is executing some variation of WaitForSingleObject() or WaitForMultipleObjects(). The main thread is "executing" somewhere in AdobeLM_libFNP.dll (at address 09619d81 - if I had debugging symbols for CS3, I could provide a function). There are nine threads "running" at the point the freeze occurs - but all of them are technically suspended due to the functions they are executing - and one thread is in a suspended state.

Log Name:      Application
Source:        Application Hang
Date:          7/17/2010 6:16:25 PM
Event ID:      1002
Task Category: (101)
Level:         Error
Keywords:      Classic
User:          N/A
Description:
The program Photoshop.exe version 10.0.1.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: d0c
Start Time: 01cb2616be79e36f
Termination Time: 2
Application Path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe
Report Id: 06f5fbff-920a-11df-9d69-001fd023417e
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Hang" />
    <EventID Qualifiers="0">1002</EventID>
    <Level>2</Level>
    <Task>101</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-07-18T01:16:25.000000000Z" />
    <EventRecordID>1615</EventRecordID>
    <Channel>Application</Channel>
    <Security />
</System>
<EventData>
    <Data>Photoshop.exe</Data>
    <Data>10.0.1.0</Data>
    <Data>d0c</Data>
    <Data>01cb2616be79e36f</Data>
    <Data>2</Data>
    <Data>C:\Program Files (x86)\Adobe\Adobe Photoshop CS3\Photoshop.exe</Data>
    <Data>06f5fbff-920a-11df-9d69-001fd023417e</Data>
    <Binary>430072006F00730073002D0074006800720065006100640000000000</Binary>
</EventData>
</Event>
And, according to the Event Viewer, the "Binary" data translates to a zero-terminated Unicode string of "Cross-thread".
My Visual Studio analysis was far more informative. All threads are hung inside of WaitForSingleObject() and WaitForMultipleObjects() calls and the DLL in question appears to be FlexNet-related. I did forget to mention that I also even manually started the FlexNet service in case, for some strange reason, Photoshop was waiting for it to start. That also did not work.
(And there is nothing in the Action Center control panel either despite the message saying there might be more information there.)
Edit: The timestamp above might be a little odd-looking. I didn't originally see anything in Event Viewer until I clicked the first button to send an Error Report. Mostly I just skipped that part of killing a process.

Problem Reading Adobe Photoshop CS3 Extended In Windows

I have Windows 7 and Photoshop CS3 Extended; can't read .psd file; error says not a supported file type; need to work with layers. When installed, received a Successful message upon installation. A solution to reading .psd files in Windows?

Thanks to both of you for responding. The files I am referring to are loaded to my C drive from ADOBE PHOTOSHOP CS3 "CLASSROOM IN A BOOK" tutorial. On the cover, it says "The official training workbook from Adobe Systems". I don't know what to do at this point. I'm ok with Html. Just need photoshop knowledge added and understand usde of .psd files provides a means to work with layering. Any suggestions?

Adobe Photoshop CS3 Extended installed but not working

Adobe Photoshop CS3 Extended was added to my computer when I bought it in Thailand.
Now (I am no longer in Thailand) I want to use it but I can't seem to open/do anything.
Even when asking for help with the 'Help' button it states that "There was an error in initializing the Adobe Help application. You may need to re-install the applicaiton and the Help componen".
How do I do this? Or am I missing something?
Thanks in advance for the help!
Eline

Haha... I like the honesty!
I was in bad need for a computer and went to one of those fancy, big shopping malls recommended to me by a couple of friends. I didn't even know I had Adobe Photoshop until today. I am not sure I really got screwed or things just work differently. The computer is a little strange... (I can write in Thai สกร่ฟส กส่ฟกส า่ฟส ่ if I would like to) but so far it's ben okay.
Anyways, what would you suggest I do Mylenium?

Photoshop CS3 Extended wont boot in Tiger

Similar Messages

Maybe you are looking for