Photoshop CS3 - HELP!!!!!

Hello, a few weeks ago I had the bad idea to download Yosemite.
Since then only problems so I formatted the MacPro purchased in 2010 and when reinstalling Photoshop CS3, I do not read the installation disc. How do I install it? Even from the download of old versions that are not part of the Adobe site. thanks

Hi,
Please use the below mentioned link to download CS3. One thing to keep in mind, that we have not Tested and do not recommend using CS3 on Yosemite.
Download CS3 products
Cheers,
Kartikay Sharma

Similar Messages

My red eye tool is not under the Spot Healing Brush, Photoshop CS3 Help?

I have Photoshop CS3 and I just recently downloaded it to my new computer. My red eye tool is not under the spot healing brush like it is suppose to be. where could it have gone? any help would be greatly appreciated! thanks!
Jolene

What tools do you see in the flyout menu?
(click and hold to see the flyout menu)
What happens if you use Shift+J to cycle through the 4 tools in that slot in the toolbox?

Photoshop CS3 help needed

My Photoshop CS3 extended when loaded on my laptop causes all of my desk top icons to turn to photoshop, the only program that will open is photoshop. This program until recently worked great. Anyone with answers would be a big help. Thanks Jess

If I am understanding what you are describing correctly, that sounds like a virus.
Also, it sounds like Photoshop is still working great, but it is the only program that is working great.
Are the icons on your desktop shortcuts? Or are they files? If they are files, it sounds like they have had their file association set to Photoshop. Which means when you double-click them, the OS will use Photoshop to open them. This is something that is set within the OS, not within Photoshop.

Photoshop CS3 Help programme

The help programme should contain an "additional how to" content enabling me to create my own "how to" tips under the help folder. It doesn't exist. How do I create or import it?
Roger

Before that go to
Window > Workspace and choose the default workspace.
If that doesn't help go to
Window > Workspace and choose
Reset Menus.
If that doesn't help try resetting your preferences as described in the FAQ.
http://www.adobeforums.com/webx/.ef4a07f/1
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

Photoshop CS3 - Help with Photomerge

I'm doing some work in a lab right now and I'm supposed to put together a large photomerge of a cell (about 220 pictures from an electron microscope). They're big pictures - about 2500 by 2500 each. The problem is that the computer can't handle that many pictures at once, so it crashes.
To avoid this, I made a lot of small photomerges (about 15 pictures each) and started putting them together to make larger photomerges. What happens is that there is a white background behind each of the smaller photomerges and when i put them together, portions of the cell are either faded or completely white. I saw the computer tech do it with CS2, but he's not here today, so I'm not sure about what the problem is. Any help?

Sorry, was looking on other photomerge threads and I forgot to write these -
Model: Mac Pro
Mac OS X - Version 10.5.2
Memory - 16 GB 800 MHz DDR2 FB-DIMM
Free Hard Drive Space - 1770 Gigs? Two HD, one with 840, the other with 930, also an external hard drive with 900 Gigs
The pictures are 6.3 MB each, and there are 220 of them for this particular cell. There wasn't an error message, but the white interference is the problem. The system is new, but the computer tech showed me how to do it on his computer (with CS2) and it worked there.
Thanks!

I am getting an error message when installing Photoshop cs3 extended on my Mac!!!! Please help

Error message when installing Photoshop cs3 extended on my Mac!!!! PLEASE HELP!!!

check compatibility first, http://roaringapps.com/apps:table

Adobe Photoshop CS3 Will Not Install PLEASE HELP TRIED EVERYTHING

I downloaded from Adobe the Photoshop CS3 Extended Trial directly from Adobe. (BTW I am on Vista 32)
The first time I tried installing, ADBEPHSPCS3_WWE.exe successfully unpacked, I successfully transitioned to the Adobe Photoshop CS3 installation, and it appeared to install. After 30 minutes or so, the installer finished and simply said that shared components had installed but the Photoshop CS3 Component install failed.
I always got in the log Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.MFCLOC,version="8.0.50727.163",type="win32",publicKeyToken="1fc8b3b9a1e18 e3b",processorArchitecture="x86"'. Please refer to Help and Support for more information
This, I know, is everyones typical problem.
I turned off firewall and antivirus.
I uninstalled ALL Adobe and Macromedia programs, including Flash and Acrobat.
I used Windows Install Cleanup Utility to remove them.
I downloaded the CS3 Clear from Adobe and cleared at levels 1, 2, and 3.
I created the Administrator account on my computer and tried everything on the Administrator account.
I tried installing Photoshop CS3 with compatibility mode for XP SP2.
I tried:
1. Open an Administrator command prompt by right clicking on Start -> All
Programs -> Accessories -> Command Prompt and selecting "Run as
Administrator" and clicking "Allow" for the elevation prompt
2. In the command prompt, type the command below
fsutil resource setautoreset true C:\
3. Reboot the machine
I tried:
Get command prompt up. It has to be run with admin rights so save yourself some time and run it this way.........Start/programs/accessories/.....right click command prompt and click run as administrator.
Then paste these commands in 1 after the other
regsvr32 vbscript.dll (THEN PRESS ENTER)
and
regsvr32 jscript.dll (AGAIN PRESS ENTER)
I even tried installing in Safe Mode but the CS3 setup would not initialize.
I do not know what else to do. I have CS2 which I will use, but I was really hoping to move to CS3 which is supposed to be better and faster. Does anyone know anything else to do? I am not a computer noob but I am not about to reinstall Vista. If anyone has any suggestions they would be greatly appreciated.

I was in the same predicament and after spend many hours over several days trying a multitude of things I finally found an easy fix (below):
========================================
Assuming you have Internet Explorer 7 go to:
Tools/Internet option/Advanced
Click the Reset dialog box. This will bring IE7 back to its default settings. You should reboot your computer. After logging back into Windows load IE and let it take you though its initial setup. When you are done close IE and install Photoshop.. This worked for me,,, hopefully it will work for you!

Adobe Photoshop CS3 has stopped working... HELP?

Everytime I try to make a GIF, and I select the length of the video, and press okay, a box comes out saying: Adobe Photoshop CS3 has stopped working. I've tried the "CTRL-ALT-SHIFT," but it doesn't work! Please help? ):
I make a GIF like this: File-Import-Video Frames to Layers.
Oh, and I have a Adobe Photoshop CS3 Extended.

You'll probably going to have to uninstall, then re-install the application; but you need to provide a lot more information;
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I am a former user of Adobe Photoshop CS3 as a very beginner. I wish to know if Creative Cloud will do everything that Photoshop CS3 did for me. I am very confused with all these new products. Can you help me?

I am a former user of Adobe Photoshop CS3 as a very beginner. I have had no training. I wish to know if the new Creative Cloud will do everything that my Photoshop CS3 did for me. Can you help me?

Please refer to:
Photoshop Help | Photoshop CC / Common Questions
https://helpx.adobe.com/lightroom/faq.html
Photoshop CC is much enhanced than CS3 & you would love the new features too.
Regards
Rajshree

Photoshop CS3 crashes all the time - Please help!

Hello
I didn't find any answer in the forum.
I work with Photoshop CS3 Version 10.0.1. on Mac Powerbook 10.4.11.
Photoshop quits all the time, no work possible anymore. It quits when I want to open a file or when I want to safe an new file (message PS unexpectedly quite).
The trouble (maybe - actually I am not sure) may started after I updated all Adobe program. There were some messages popping up that not everything was updated properly.
Anyway I reinstalled Photoshop 3 times and CS3 completely 2 times and the last time I run the clean up program as well. No change.
Please help! Thank you very much.
Rosa

Rosa,
>So, you are also suggesting that I don't upgrade but install new.
NEVER, ever use the "upgrade" option.
Rather, do an "Archive and Install".
>What do I have to take care of beside of making a backup from everything?
Routine maintenance is imperative.
I still advocate Repairing Permissions (with Apple's Disk Utility) before AND after any system update or upgrade, as well as before AND after installing any software that requires an installer that asks for your password.
I have seen software installations go sour because the installer did not find everything as and where it should be.
I have also seen software installations go bad because the installer did not clean up after itself properly and did not leave everything as and where it should be.
This is just my own personal opinion and practice based on my own observations. Others may disagree and that's OK. I can only base my routines and my advice to others on my own experience and conclusion. I don't pretend to know why others believe otherwise.
Repairing Permissions after the fact (i. e. not immediately before and after an install) seldom helps.; Try it anyway, though.
====
Additionally, if your machine does not run 24/7 so that it runs the daily, weekly and monthly Cron Scripts in the middle of the night as intended by Apple, run Cocktail (shareware) as well.
Cron Scripts are maintenance routines designed by Apple to run on a daily, weekly and monthly basis in the middle of the night.
If you don't run them, you WILL run into trouble, sooner rather than later.
Here's an excerpt from the Apple tech doc
http://docs.info.apple.com/article.html?artnum=107388
Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode. If your computer is shut down or in sleep at the designated times, the maintenance does not occur. In that case, you may want or need to run these manually.
Mac OS X periodically runs background tasks that, in part, remove system files that are no longer needed. This includes purging older information from log files or deleting certain temporary items. These tasks do not run if the computer is shut down or in sleep mode. If the tasks do not run, it is possible that certain log files (such as system.log) may become very large.
Also, from:
http://docs.info.apple.com/article.html?artnum=106978
The disk activity generated by find is a normal part of file system maintenance, used for tasks such as removing invisible temporary files that are used by the system. It is scheduled to occur early in the morning at 03:15 everyday, 04:30 on Saturdays, and 05:30 on the first day of each month.
NOTE:
There have been comments to the effect that Apple "fixed" this in 10.4.2 and later versions of the OS, but I have not been able to verify this to my satisfaction. The reference in the 10.4.2 release notes are far from explicit on this subject.
= = =
If you have DiskWarrior, run it regularly too.

Adjusting Levels not working, please help. Photoshop CS3

Anyone have an answer for me? Tech support NOT helpful unless I dish out even more money! Using Photoshop CS3. I am trying to adjust the levels on a very simple bitonal scan from PDF. When I adjust them by going to, Image, adjustments, levels, the preview of it works and it shows what I want, but when I hit OK, it dissapears. If I go to Layers, New Adjustment Layer, Levels, it shows up fine until I save it.. I am trying to save it as a PDF file, and I am saving it with Adobe 6 (1.5) because of compatibility issues (so I've read), it should save layers. But its not saving. Or maybe it's not opening in my Adobe Acrobat? is there an update I need or something? Is there a step I am missing? is anyone else having this problem? Even so, the Level adjust should work regularly while in PS CS3.
THANK YOU!!

make sure you're viewing the preview at 100% zoom. any other zoom level isn't going to give you a true representation of the adjustment you're making...

Can not send my NEF files to Photoshop CS3...Please Help

Hello
Can someone please tell me what I am doing wrong!! I shoot with a Nikon D300. I use Photoshop CS3 along with Bridge and InDesign. I have Windows Vista. Now that the facts are out of the way........
I have tried installing an update of Camera Raw. I did the following. Please correct me before I pull my hair out!!!
I first removed ACR 4.0 and put it in a folder on my desktop (Camera Raw .8bi)
I then downloaded DNG Camera Raw 4.6 zip from the Adobe site. These were my next steps:
start/computer/double click local c/program files/common files/adobe/plugins/cs3
I then took the DNG camera raw 4.6 and placed it in the last folder (cs3)
I started Bridge. I can see my Raw images there. I double clicked on an image to transfer to photoshop and an error message poped up (once again) saying that photoshop does not support the file. I went to the help section of cs3/about plugins and there was not a camera raw icon I could click on.
Did I install this in the wrong place??? What can I do to obtain these files? I need them to be converted to JPEG or a TIFF.
Someone please have an answer! I'm praying!
Thank you,
Tina

The DNG converter is a stand-alone application which is an alternative to Adobe Camera raw. Particularly useful when your camera is not covered by the latest version of ACR.
It does not go in any specific folder and you have to use it to convert your NEF files to DNG format in order to view them in Bridge and process them in ACR.
You really need to read the instructions on the download pages and in the links there before ploughing on to disaster!

Can't open files in Photoshop CS3...Please Help!!

So last night I was downloading some pictures off my CF cards and apparently I have way too many pictures on my pc and it's full! So I stopped downloading and started deleting!
But while I was doing that, I tried to open some images in photoshop and it just freezes up. The dialog box pops up for a brief second when I try to open the image and then it just disappears. Then I can't click on anything. I have to "ctrl-alt-del" to even shut photoshop down. Does any one know what's up or how I can fix it?
I'm using CS3 and windows xp if that matters...
I have two drives. The drive that I have photoshop on has 184GB left on it...so plenty of space. The other drive...the one I store photos on...only has 32GB left.
I deleted a bunch of photos (need to go buy more DVD's to back up so I can delete more), uninstalled photoshop, cleaned up both hard drives, re-installed photoshop....and it's still doing the same thing. I don't know what else to do....

Cyndi -
I would start with the easiest thing Archive the preference file to your desktop then we can continue from there if that doesnt work.
- Close PS
- Type this into your run menu
%appdata%/adobe/adobe photoshop cs3/
- Now drag the Adobe Photoshop CS3 Settings folder onto your desktop
- Keep the adobe folder window open
- Launch PS
- If this works then there was something corrupted in the preferences somewhere
- If this doesnt work then delete the newly created preference folder from the adobe folder and drag the one from your desktop back into the adobe folder.
Hope this helps.
-Rilla

My Photoshop CS3 wont open help!!!

Even though its old I still use PS3 and I went to open it and this window pops up with a white box and no text that I was unable to close (only the yellow dot option to minimize) It says on the top "Adobe Photoshop CS3 Extended" and in the photoshop dropdown menu almost everything is greyed out and the program never opens. I really need to edit some photos please help.

This might be the solution:
http://helpx.adobe.com/creative-suite/kb/blank-registration-screen-cs3.html

HELP!! When I open Photoshop CS3 it states "Could not initialize Photoshop because you do not have the necessary access privileges".

When I open Photoshop CS3 it states "Could not initialize Photoshop because you do not have the necessary access privileges".
Also, InDesign crashes when trying to open it.
I am running OS X 10.6.8
The most recent task I did was a Mac OS snow leopard software update.
I created a new user account and both Photoshop and InDesign work perfectly when logged into that account, but the problem is persisting with my old account.
I tried, but didn't receive much help from Adobe.
Any help would be appreciated!

I see. Well, if it works on a new account, then I guess that' good enough. You might still wanan try and fix your permissions on zthe otehr account, though. It may just require digging into the terminal and commandline operations to recursively apply this stuff to all folders and sub-folders...
Mylenium

Photoshop CS3 - HELP!!!!!

Similar Messages

Maybe you are looking for