Photoshop CS3 .png format not appearing in the "Save As" drop down?

I have been searching all over the internet and forums like this for a solution but have not come across one that works. I have tried installing an update for .png 8 bit and replacing the .png format file entirely, and to no avail. I'm sure all updates are there for my Photoshop CS3 because I just had my lap top worked on and they had to re-add my CS3, so I think that if any updates were needed they would have done that. I have worked with programs like Photoshop for awhile now but I do not know to much about it's inner workers (files, etc.) so I am not sure what the problem is, and I really need this fixed ASAP. I am working on work and I need that .png format. I can't do without it and .png shows up in the "Save For Web Devices", but I am using trasnparency and it is not doing any justice to my images.
Windows Vista
Adobe PhotoShop CS3
15.7 GB free out of 105 GB
I was working on Photoshop all day yesterday - no problem. Today, I can't get .png.

Be very specific: Does it say 10.0 or 10.0.1? If the former, I recommend you visit this page and download and install the update:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=3775
The plug-in should be here:
C:\Program Files\Adobe\Adobe Photoshop CS3\Plug-Ins\File Formats\Png.8bi
It should have a size and date of 98,304 bytes modified on Saturday, October 20, 2007, 8:11:42 AM EST.
-Noel

Similar Messages

Photoshop CS6 Plug-ins not appearing when clicked under extension drop-down menu

I noticed that for some reason, my default extensions that come with photoshop cs6 extended and also custom installed plug-ins won't appear when clicked on. Usually you see a check mark by the plug-in if it is working and is visible on the photoshop layout as a panel. I have tried uninstalling and reinstalling, which the Kuler extension worked, but only under the workspace that I opened it up for. So for example, I opened it up on Essential workspace, but it wouldn't appear when changed to painting workspace. When I close the panel from the workspace, it won't ever come back up again even when clicked on under the extension drop-down menu on any workspace. This is occuring not just on my desktop, but also on my laptop. Both are not Photoshop CC, but regular Photoshop CS6.
I don't really mess around with the extensions much, but once I found out about the painterswheel plugin, I really wanted to try it out, hence now noticing this extension issue with my plug-in..
All my plug-ins appear on the drop down menu for Windows > Extensions, so it shouldn't be a file placement problem. I have also tried the Adobe troubleshoot for plugins by uninstalling my plug-ins to see if third party plug-ins were the problem, but still my default plug-ins won't even work.

I'm a little confused with what you write. There is a difference between extensions and Plug-ins. Plug-ins are installed using the plug-ins installer and extensions are installed by "Adobe Extension Manager (version)" where version is the Photoshop version and the extension package must be created for that particular Photoshop version. A CS5 package will not work in CS6 etc. Installed extensions will be listed in Photoshop under menu Windows>Extensions>List of them. Plug-in may install in the Filters menu or a place like menu File>Automate>Names. Installed Extensions that you installed should also show in the "Adobe Extension Manager (version)" window. Adobe installed extensions like Kuler and Mini Bridge do not show in the "Adobe Extension Manager (version)" window.

How do I restore an old Iphone 3gs backup if it does not appear in the "restore backup" drop-down list?

Hi
Last night I tried to install ios 6.1.2. The install failed. I tried again and this time it recommended restoring the phone - I agreed and it worked, but after the restore was completed, I could not get out of the set-up assistant screens on the phone. It kept saying either connect to Itunes, or connected to Itunes - there was no conclusion of the set-up process.
So again I chose to restore the phone - this time I got through the process and asked it to restore my last back up. It did so, but it turns out the back-up is empty. Looking at the time of the back-up, I think what happened is the phone synced while it was stuck in the set-up assistant, and the old backup with all my data was overwritten with a new empty back up.
If I use windows explorer I can see a back-up set from earlier in the evening that should contain all my data (6pm) but when I look in iTunes that backup set is not available for selection in the "restore back-up" drop down list. Perhaps its only a partially completed backup, but at 1.55gb it sure contains a lot of valuable data. How can I make iTunes see or use the 6pm backup set?

yes - sadly I think that's what happened. As the phone was connected, it was syncing and backing up automatically while I tried to complete the set-up process. So an empty back-up overwrote the full one. But the full back up is still there in the application data files - it must have done a back-up automatically before it restored the phone. So why can't I see it and use it in iTunes? Very frustrating!

How do I delete web site addresses that appear in the navigation window drop-down menu?

In Explorer you can quickly delete any web address in the navigation window drop-down list. Also, only addresses that I actually type into the navigation window appear in the drop-down. I like this system.
But in Firefox, I cannot discern the rules at work. Web addresses appear and disappear in the drop-down list seemingly at random, and no way to delete addresses.

Selecting "Never Remember History" will make you enter [[Private Browsing]] mode, so be careful with selecting that.
See:
* http://kb.mozillazine.org/Deleting_autocomplete_entries
* [[Clearing Location bar history]]
* [[Cannot clear Location bar history]]
* [[Location bar autocomplete]]

Is there a way to get ACR to appear in the "Open With" drop down menu?

Hi,
Is there a way to get Adobe Camera Raw to appear directly along with CS3 in the Mac's ( OS 10.4.11) "Open With" drop down menu?

If you installed ACR it in the right place, and are targeting the kind of file that ACR can handle, it should be there.
I have found that there are certain Tiff Scans that won't open in ACR but if you just Duplicate them in Bridge, and then target the Duplicate, they will then open in ACR.
At least they do so for me.

When trying to assign IP reservation in IPAM, Domain does not appear in Forward lookup zone drop-down list

I am trying to assign reserved IP Addresses through IPAM that is installed on a Server 2012 OS. Here is the procedure I have been following:
Login to IPAM server
Open Server Manager
In left-hand column select IPAM
In left-center column expand IP ADDRESS SPACE
Select IP Address Range Groups
Right-click the appropriate address range and select Find and Allocate Available IP Address
In new window, scroll down to Basic Configurations
I can input the basic configurations with no problem. DHCP Reservation Synchronizations look good too. But when I get down to DNS Record Synchronization, I can't do anything with the Forward lookup zones because nothing appears in the drop-down
lists and I cannot manually enter the zone name. Here is a screen shot of what I see at this point:
Without completing this information, I cannot complete the Address Reservation.
Any help or insight will be greatly appreciated.
Thanks!
Tom LaLumiere

Hi Tom,
This happens if your DNS servers that are managed by IPAM are not authoritative and primary for any zones, if they are not authoritative for the appropriate zones, or if there are not any DNS servers managed by IPAM.
See the examples below. Here my DNS server is authoritative for 4 forward zones and 2 reverse zones. I can choose any of the forward zones but assuming I pick a range such as 10.0.1.0, I would be unable to choose the 168.192.in-addr.arpa zone because the
IP addresses do not match.
-Greg

File Format options not appearing in the Save As dialog box - InDesign CC

So i was working with a legacy file (an .eps from illustrator4) that i placed into InDesign CC, and when i went to export as a jpg, the option to choose a different file format from the bottom of the dialog box was gone. Did i hit some crazy shortcut to remove the options, or is this a bug that occurs when working with certain legacy files? I've restarted InDesign, rebooted my laptop, deleted my Adobe preferences, reset my adobe warning dialogs, and I still cant export or save as any other file format because the option doesnt appear. And it doesnt matter if i create a new file or open an existing one. Please help. See the pic below. No option for file format on the bottom of the dialog box.

Thank you very much!
Reinstalling worked, but i'd still kinda like to know what caused this problem & if this will continue to happen. To me, reinstalling is pretty much like having to reboot anytime you go to IT -- they dont know what the problem is, they just know how to fix/stop it.

How do I get the quit option to appear in the top right drop down so I can exit a bookmark??? thx

same as above

Hi:
On Android 4 and higher, you can still close Firefox or any other app from the app switch screen (Ice Cream Sandwich: long press on the home button; Jelly Bean: tap on the app switch button [[Image:app switch button 25px - Android Jelly Bean]]).
If you need the menu item back, you can install an Add-on like the QuitNow Add-on to do that. Here's [[How do I quit Firefox for Android?|how to install an add-on to add Quit back]]

I just set up a new computer running Windows 8.1. When I go to my icloud photostream, the pictures are in PNG format NOT JPG. When I open and upload photos from the photostream, the resolution is so low that the image quality is terrible. Help?!?

I just set up a new computer running Windows 8.1. When I go to my icloud photostream, the pictures are in PNG format NOT JPG. When I open and upload photos from the photostream, the resolution is so low that the image quality is terrible. Help?!?

Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.

Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix. The edited image appears back in lightroom in a new folder.

Lightroom 5 file edited in photoshop cc 2014 does not appear back next to original after save. Is anyone else having this issue? If so what is the fix. The edited image appears back in lightroom in a new folder.

I'm performing a normal "Save", not "Save As". Work flow I'm using is as follows: Select photo in Lightroom 5.7 >" Edit In" Photoshop CC 2014 > (after working on photo is PS) > Save > close PS. Photo returns to Lightroom 5.7 in a new folder rather than next to the original. Prior to purchasing the monthly plan and upgrading to PS CC 2014, I performed this same work flow using Lightroom 5.6 and Photoshop CS6 without any issues.
Just for fun... I attempted to move the edited file back into the original folder. I received a prompt that said the file already existed in the original folder, however I can't see it except the new folder that LR created. I tried several different sort orders, etc without any success.
*** Follow up: Was unable to resolve the issue using Photoshop CC 2014. Uninstalled PS CC 2014 and went back to using Photoshop CS6. Return trips from LR 5.7 to Photoshop is now performing as it should: returning edited photo back to the original folder in LR 5 and placing next to the original image.
Should anyone have a suggestion on getting Photoshop CC 2014 to do the same, I would love to be educated.
Thanks for the help, dj_paige.

CS3 action script 2.0: compiled clip components do not appear in the component panel

Hi,
I have a FLA file containing 3 compiled clip components.
I use a MXP file to copy this file to the components panel,
this works fine when using Macromedia Flash 8 or Macromedia MX
2004, but when using CS# the components do not appear in the
components panel, only if a use regular component or SWC component
it appears in the panel, any reason why?any ideas?
Thanks
Maya

I can use this code from html. I'm able to say where the swf
and xml file are. I just don't know how to do this using action
script.
<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,0,0"
width="768" height="576" id="tech" align="middle">
<param name="movie"
value="slideshow.swf?xml_path=musicbox_slideshow/slideshow.xml"
/>
<param name="quality" value="high" />
<embed
src="slideshow.swf?xml_path=musicbox_slideshow/slideshow.xml"
quality="high" width="768" height="576" name="tech" align="middle"
allowScriptAccess="sameDomain" type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>.

Photoshop CS3 crashes at start up all the time after few months of working well

My problem with Photoshop started last week. It hangs (freezes) all the time and I am not able to work on it at all. I did reinstall the photoshop, created a new user on my imac, cleaned preferences and I don't have a CD in my my DVD drive, but it still crashes every time I open it. Doesn't allow me to do anything. Any suggestions? I can see the top menu items, but the moment I click on HELP it hangs. If I open a file I can't do anything with it as it freezes.
Details as per above: Mac OS X 10.5.4, iMac, 2.4GHZ INTEL CORE 2 DUO, 2GB 667 DDR2 SD RAM - 2x1GB, 320GB Serial ATA Drive (129 GB free space), SuperDrive 8x DL, two external 500 GB hard drives (one storage and the other one for time machine backup), Adobe Creative Suite 3 Design Premium-Photoshop CS3. All other applications from the suite work with no problems, just photoshop hangs every time i try to click anything. I have to force quit every time.
The only new thing I did is install a new Lexmark Wi-Fi X9350 printer. Would this be a problem?
Thanks for any help I can get...

Thank you, thank you and again thank you!!! It works!! I have no idea which did it but I did put ~ in front of the TWAIN.plugin and got rid of the printer. I was so upset about it and now I can smile again.... Hope it will work with no problems now...
Did I say thank you enough...

FDMEE: EBS segments not appearing in the FDMEE Load Rule window

I have configured FDMEE to load GL data from specific E-Business 12 segments. This has been working fine.
Recently, additional segments were defined in EBS. Unfortunately, these new segments do not appear in the Load Rule box (whereas the original segments do appear).
Is there an option/trigger somewhere in FDMEE (or EBS) to force the new segments to appear in the FDMEE Load Rule selection segment box? (I have re-initialised the source system, with no effect.)
Ian

Hi,
You need to make sure that you are adding them to the Import Format defined between the Source and Target system. Have you done this yet?
Are there target dimensions in the app to point to?

New Hard disk is not appearing in the System Profiler

I am doing a fresh install using my ligitimate Snow Leopard DVD on my USB disk.
My SSD is not appearing in the System Profiler under Hardware>ATA
or under Hardware>Serial-ATA
It is a PATA device as was the original disk I've replaced.
So I have NO disk to install onto.
Any ideas what the problem could be?
===
History
My hard disk died, and I am replacing it with an SSD.
I bought a Mach Xtreme Technology Pata 1.8" SSD (Part no MXSSD1MNANOZ-120G)
(I can send this back if I have to)
The SSD is unusual in that it has to be a 1.8" size with a ZIF PATA connector.
The SSD is preformatted (but not necessarily to Apple formatting).
With the SSD the same way around to the original 80GB HDD, Pin 1 of the new SSD is towards the back of the computer.
I cannot find any information as to which Pin on the original HDD is Pin 1.
I used this tutorial to dismantle and reassemble: http://www.youtube.com/watch?v=PnV7mHS7Qi8
I've double checked the connections inside.

Thanks, this was the answer.
The connector on the SSD I used was indeed arranged reverse to the original Apple Drive. So it looked different to all the tutorials.
I knew where Pin 1 was on the new SSD but could not see it on the old drive.
The original 80GB hard disk had Pin 1 is towards the middle of the computer.
Flipping the SSD over meant it was about 3mm closer to the back, which made the zif ribbon buckle. So I had to cut away some of the rubber shock absorber to the back, and use tape. The SSD should not need the shock absorber as it is not mechanical/vibrating.
It is now working well.
(Although I now have a different problem restoring from the Time Machine. )

Videos does not appear in the list after syncing

I have synced my 10 minutes music video to my 3gs and the syncing already completed without any error.
but then i could not find my video in my 3gs. i already checked the include music videos in music sync. i'm sure the video is in mp4 format.
before this, it shows no videos, you can download videos from itunes, but after i sync this video, it turn out there's like a list of videos but it does not appear. only an empty list without nothing to select on.
i even try to find the video using spotlight search and it resulted none in my phone but in itunes it shows the video is in there. i wonder where the video goes.. = ="

I think my question wasn't clear. I know how to display the attachment header (I use classic layout) but the problem is that the paperclip icon does not appear against the messages that contain attachments. See screenshot below. The attachment column is displayed but is blank. These are my sent items and I know for a fact that most of them have attachments. Can you help?

Photoshop CS3 .png format not appearing in the "Save As" drop down?

Similar Messages

Maybe you are looking for