Photoshop CS3 - Windows 8.1

I had Photoshop CS3 installed on my previous computer. I now have a new computer with Windows 8.1. Is there any way to make it compatible with 8.1? CS3 was originally downloaded from the Adobe site and I still have the serial numbers. I can't find a download for CS3 on the website to reinstall it. Am I out of luck?

Are there any issues with this Operating System and Photoshop CS3 Web Premium?
You bet there are. Starting with Win 7 the print engine and certain other parts of Windows have changed and naturally the new security menchanisms may require compatibility modes and a lot of trickery already upon install. It's not impossible, but issues should definitely be expected - some small, some more critical.
Mylenium

Similar Messages

Photoshop cs3 + windows vista + intuos 3

I am working with "photoshop cs3" "windows ultimate vista" and an "wacom intuos 3" tablet and I experience heavy lags while drawing like the brush-strokes don't quite follow my moves, and I have to wait for them to catch up.
When I open a large file and I try to apply the first brush stroke on my drawing the cursor screen disappears for a while and photoshop is not responding.
Then Photoshop comes back so the cursor and I can start to work. But as soon as I drag the page using the little Hand tool photoshop stops responding again for few more seconds and when it restarts I can hardly control the direction of my new brush strokes.
Apparently in order to restart the only remedy I found (by chance) is by toggling the layer visibility status (change a layer from visible to not and back to visible again). After this exercise I can draw in photoshop again! But of course same problems again as soon as I will use the hand tool and move on the screen again!!!
Any idea about what could be behind my problems!?
What should I check?
(These problems started after last week immediately after re installation of vista on my machine, I never had this problem with vista photoshop and intuos on that same machine before!)
Thanks
Mario

I have CS3, Vista Ultimate and an Intuos3 tablet. No lags or delays now. But I used to have them and many were reported on the Wacom Users Forum when Vista first came out. I can't remember now what the fix was - have a look on the Wacom Users' Forum. If you had it running ok on your previous Vista installation some software setting must have changed in the new installation. Things that may help are:
get latest Nvidia vga card drivers (if you have an Nvidia card); get the latest Wacom driver; Logitech Setpoint software conflicting - the latest is ok for me; disable/switch off the Vista Pen and Input device.
Sorry, I can't remember the fixes but they should be available if you dig around in the Wacom Users' Forum.
David

Automate Menu is not showing the option to create droplet in Photoshop cs3 windows 7

Automate Menu is not showing the option to create droplet in Photoshop cs3 windows 7. Any thoughts why?

Have you reset the workspace to Default?
Window>Workspace>Default Workspace

Fonts Not Available in Photoshop CS3 (Windows 7)?

Hello,
My desktop computer crashed yesterday and I had to run out last night and pick up a new unit as I'm trying to meet a number of deadlines (and not having much luck getting the work done in my laptop).
The new computer uses Windows 7 as the Operating System. It has already presented a ton of headaches... I've already spent in excess of ten hours trying to reinstall hardware and dealing with the various quirks that arise.
The latest of these issues is that I cannot seem to access some fonts from Photoshop CS3. I'm having the same issue, to a lesser extent, in Illustrator 10.
For instance, after downloading the Helvetica and Helvetica Neue families in Windows 7, they do not appear in the Type menu in Photoshop. There are a ton of useless pre-installed fonts there, but not the ones I installed. If I try to access them from Illustrator, it displays only one weight of each typeface (for instance, it displays Helvetica Neue 65 but omits 55, 75, 95, etc....).
The issue does not occur for all fonts. For instance, I installed AvantGarde and it displays just fine. In that instance, the fonts were TrueType whereas the Helvetica font files are Type 1 font files.
Can anyone help? I've already lost a day-and-a-half of work, and can't afford to spend much more time screwing around with this nonsense.

Bill,
Thanks for your thoughtul and thorough reply.
To clarify, I do have a copy of ATM, but just have not installed it on my XP computer or this new one. It is on my Illustrator 10 install disk. Not sure if it will work on Windows 7, as Illustrator 10 would not run on the new computer until I set the compatibility to work with Vista and earlier. I suppose that I could install it and see if it works. Might be worth a shot.
I will check out the software titles you referenced.
With regard to font installation on Windows 7, there are three techniques as far as I can tell. They are:
1) Drag and drop method: Works the same as it always has. Simply drag the typefaces into the Fonts folder or Control Panel > Fonts.
2) You can navigate to where a font file is located (the desktop, for instance) and then right-click on it and choose "Install." This is what I referred to previously, and I tried it after drag-and-drop did not work.
3) For the third method (according to Windows 7 documentation I found online at http://social.answers.microsoft.com/Forums/en-US/w7desktop/thread/324ecdc6-8574-4527-8099- efc430bf550f), you are supposed to be able to go into the Control Panel > Fonts, press ALT (to display the menu) and then choose File > Install New Font. You would then be prompted to navigate to the typeface you want to install. However, this option is not available on my computer. When I tried it, I can access the File menu, but "Install New Font" is not listed on the dropdown.

Photoshop CS3, Windows XP

I have both Photoshop CS3 and Photoshop Elements 6 on my computer. When I click on a .psd file it opens Elements to read it, and I want it to open CS3. How can I fix this? Thanks so much for your help.

For Windows XP:
Open Windows Explorer (not Internet Explorer)
Go to Tools > Folder options
Select the File Types tab
Scroll down to PSD and click the Change button and change it to Photoshop.
I haven't had to do this on Vista, but I would presume it would be similar.

Photoshop CS3 Windows à installer sur MAC

Bonjour,
Je suis propriétaire d'une licence Photoshop CS3 pour PC Windows et je viens de changer de PC. Je viens d'acheter un Mac Book et je voudrais installater ma version de photoshop sur mon MAC Book. Comment faire, SVP?
Message was edited by: domitoussaint

you can't install pc apps on a mac (or vice-versa). you need to purchase a copy of ps for your mac.
adobe allows users to swap platforms, but only for current products, http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l
your options are to look for a third party or move up to ps cc. adobe has a time-limited special for $9.99/mo that includes photoshop and lightroom and bridge, http://www.adobe.com/products/photoshop/buying-guide.html

■Adobe Photoshop CS3 Windows版アップグレード専用パッケージ (新品同様)

■Adobe Photoshop CS3を使っています。
PDFファイルをJPEG2000でフォーマット（.jpf）→■Adobe Photoshop CS3で開けないのですが、、、（エラー表示＝ドキュメントの種類が適切ではありません）
ご存知の方　ご指南よろしくお願いします。

OS不明(再掲）。
＃１でも書きましたが、「PDFファイルをJPEG2000でフォーマット（.jpf）」という手段の詳細が不明です。
フォーマットという用語をどういう意味で使っていますか？
今ではPDFファイルはAdobe製品の共通ファイル形式になっているので、PDFといったらあのアプリケーションというほど明確ではありません。
面倒臭がらずに丁寧に書くことです。同じ環境下の方がいたら再現できるくらいは書くことです。
ここのフォーラムでは新規投稿の場合は、返信が付くまでは投稿者に削除を含む編集権があるので、投稿直後には修正できたと思いますが。
件名（トピック見出し）の修正は以下を参照。
・フォーラム内に間違えて同じトピックを作ってしまった、もしくはトピックタイトルやトピック見出しの修正が必要になりました。
http://forums.adobe.co.jp/help/forumfaq.html#discussion
＞件名をJPEG2000での保存　と入力したはずでしたが
だとしても、この件名でもおかしくありませんか？
最初の質問投稿で「Photoshop CS3で開けないのですが」と書いていますから、保存のまえに開くことすらできないのでは？
質問投稿からすると、すでにファイルはJPEG2000形式になっているという理解でいいのだろうか？
それともPDFファイルそのものを開こうとしている？
下記はCSでの情報だが、プラグイン名は「JPEG 2000.8bi」とある（現在とは異なる可能性も）。
文書番号 : 223284
JPEG 2000 形式で保存できない
「画像を JPEG 2000 形式で保存するには、 JPEG 2000 プラグインをアプリケーション CD-ROM からインストールします。」
もしかして闇雲にフォルダーを開いている？「プラグイン」「JPEG」「JPEG2000」とかいった関連しそうな名前で検索はしていない？
下記サイトだと、Photoshop用プラグインの拡張子は「8bf」あるいは「8bi」だという（現在とは異なる可能性も）。
http://www.246.ne.jp/‾ogu/01-20/ext.htm
サポートデータベースには以下の拡張子を含むサポート文章が複数ある（かなり以前のものも含む）。
　　　　　8ba、8be、8bf、8bi、8bp、8bx、8by
なお、「JPEG2000」ではなく「JPEG 2000」と間を空けて書くのが正式であるという。
・JPEG 2000 - Wikipedia
http://ja.wikipedia.org/wiki/JPEG_2000

Opening multiple images in Photoshop CS3 windows

I can open an image just fine in Photoshop CS3 by going file-open and clicking on the file, I then want to bring in another image into Photoshop CS3 by using file-open which I can do but then the first image disappears and only the second image is in Photoshop. Any ideas?
Thanks, Larry

Freeagent- It worked! Thanks for the advice.
Larry

Photoshop CS3 Windows XP Welcome Screen How to redisplay it?

Ok I realize this is a very newbie question and I am sure there is a very easy answer but I looked in the help menu and the knowledge base to no avail.
I stupidly checked the "Don't show again" box on the Welcome Screen in Photoshop CS3 thinking I could redisplay it later easily, however, I am not finding how to do it. I figured it would be like my Illustrator CS3 and be in the help > welcome screen but it isn't.
I'd kinda like to have it redisplay on start up for Photoshop. Please help me to "undo" a blonde moment mistake. Thank you for your time and I hope you had a good laugh at my expense.;) I would laugh but I'm too frustrated for not figuring this out. :)

I hope I don't sound condescending... I just want to understand the issue, so maybe I can help.... but do you mean Photoshop CS2 or CS, perhaps?
My 2nd thought was that you were trying to open CS3's splash screen after Photoshp was loaded; but that has no "Don't show again" prompt, so that can't be it...
Last thought: do you have *both* Photoshop CS3 and CS2 (or CS) installed? It's the only thing I can think of that may be causing confusion, as I have personally mixed up options / features between them when I had them all installed. (Until recently, I had
all versions of Photoshop from 7 to CS3 Extended installed at the same time!) :P
Don't ask me why. I am a digital packrat. :p
edit: one more thing...
You mentioned Illustrator CS3 having this welcome screen feature, and that its help file shows a way to restore it. I don't have Illustrator CS3; but it sounds like this version of Illustrator still uses the welcome screen, though its Photoshop counterpart doesn't. ;)

Can´t start Photoshop CS3 Windows

When I start PS CS3, by initializing the pallets ("Paletten werden initialisiert" (German message) the window closed and does nothing more.
After uninstalling and new installation the same happened.
What can I do?
Is there an uninstalling tool from adobe, which removes all registry keys?
I hope you can help me.
Greetings from Germany

Try resetting your preferences as described in the FAQ.
http://www.adobeforums.com/webx/.ef4a07f/1
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

Color faded in photoshop (CS3 Windows)

Hi all,
Recently when I open an image or graphic in photoshop the color all looks faded. I've checked and its not CMYK color mode - but it looks like it.
When i go to save the image though (e.g. Save for Web) the color is normal again?
Not sure what setting has changed or whether I've accidentally pressed something but I would appreciate if someone has experienced this before or knows what I've done if they could let me know.
It's quite distracting !
Thanks

Your response is much appreciated.
The response is presumptuous because we don't know what operating system you are using.
Most Windows browsers should not shift sRGB color at all BECAUSE Windows Defaults/Assigns/Applies/Assumes sRGB when files are untagged (or unmanaged), so BOTH tagged and untagged sRGB should look identical in Windows (at least in Vista).
The Mac is 'different' BECAUSE it Defaults/Assigns/Applies/Assumes MonitorRGB when files are untagged (or unmanaged) — this means OSX will display tagged and untagged sRGB differently in color-managed apps.
In Mac unmanaged applications, OSX will display tagged and untagged sRGB identically BECAUSE the same default monitor profile is being Assigned/Applied/Assumed.
In Photoshop, if we strip the profile, Photoshop (in essence) Defaults/Assigns/Applies/Assumes its Working RGB.
If colormanaged applications like Photoshop and Safari are displaying tagged sRGB with a yellow color cast — you probably have a bad monitor profile to rule out...

Photoshop CS3 Windows 7 compatibility

Hello,
I'm going to buy Adobe PS CS3 (from other site), but I'd like to know: is it fully compatible with Windows 7 64bit?

From Adobe CS6 is the only version of PS you can buy. Other sites may offer older versions, but you have to be very cautious of bogus copies. Ebay is full of them. They look like new professional copies, so just beware.
To answer your question, no, you can not "upgrade" to CS6 as CS1 is too old. I would just be cautious of any offer to "upgrade" to CS4 for reasons stated above.

Photoshop CS3 shuts down after opening a PSD file with layers

Hello, I have met a problem with Photoshop CS3 (Windows XP SP2, no network printer) - after opening a PSD file with layers (saved with CS2) Photoshop shuts down. No error message.
Can some of you help me? (The only software that I have installed after Creative Suite CS3 is Corel X4. I have installed no upgrades of CS3.)

> I have installed no upgrades of CS3
You should!
Even if it doesn't help here you should.

Pen Tool in PhotoShop CS3 VERY Slow

I just installed CS3 on my laptop and am trying to use the pen tool to draw a path. I have to wait between 30 seconds and 2 minutes for each point to show up. Needless to say it's impossible to create a curve because I can't see the path. I'm using PhotoShop CS3, Windows XP Professional on an IBM Thinkpad T42. I'm not using a tablet, although I do hve one available to use.
Thank you for your time.

As usual could be a variety of things depending on your system. Try a search for "slow tools" to see some of the posts. Here is one on slow pen drag.
http://www.adobeforums.com/webx/.3bc80a0f/0

Photoshop CS3 Hangs for over a minute upon opening a file

My Photoshop CS3 (Windows XP) all of a sudden takes over a minute to open any file. The programs starts fine, then when I select a file to open, the program pauses, then hangs for over a minute and the photoshop window becomes blank before the file finally appears. Any suggestions? Thanks.

Try making a
generic printer driver your default printer. If you don't have one, download the Adobe Postscript driver here:
http://www.adobe.com/support/downloads/product.jsp?product=pdrv&platform=win
All part of the fascinating world of Photoshop CS3.

Photoshop CS3 - Windows 8.1

Similar Messages

Maybe you are looking for