Photoshop CS4 and iMac(ATI 4850) Open GL problem?

Hi: My problem is; when I click full screen mode with menu bar options(Shortcut is F) my workshop background grey area has a colorfull noise and lines(Randomly). My machine and graphic card compatible with Open GL. Anyone know why did happen like that? Buy the way I did all updates. My guess this problem happened after Mac OSX(10.5.7) updates. How can I fix this?
Ps: My machine 2009 iMac 2.93 Ghz with ATI 4850....
Like that;
http://i42.tinypic.com/s2yv5y.png

yeah, short term test deems keeping both cards in.
So, here are the results: Notes: I have 2 monitors, an Apple 30" and Apple 23". The 30" can only be used in the dual link dvi port and NOT the Mini Display port. Second: The ATI 4870 seems to have an issue with the Mini Display port, it does not work, alone or in tandem with the dual link dvi port being used. Apple is replacing the card (heretofore, I had no cause to use the Mini Display port on the 4870 at all) Third: Only Photoshop CS4 extended was used to see if the card was detected and if it had enabled Open GL
ATI 4870 - dual link used, Mini Display NOT used: Photoshop sees the card and enables Open GL
ATI 4870 - dual link used, MIni Display used: didn't test because Mini Display port did not work.
ATI 4870 - dual link NOT used, Mini Display used: didn't test because Mini Display port did not work
Nvidia GT120 - dual link used, Mini Display NOT used: Photoshop sees the card and enables Open GL
Nvidia GT120 - dual link used, Mini Display used: Photoshop does not see the card and thus Open GL is NOT enabled.
Nvidia GT120 - dual link NOT used, Mini Display used: Photoshop does see the card and Open GL is enabled
ATI 4870 Dual link used, Nvidia GT120 Mini Display used: Photoshop does not see a card and Open GL is NOT enabled.
ATI 4870 Mini Display used, Nvidia GT120 dual link used: did not test because ATI Mini Display port did not work

Similar Messages

I have Adobe Photoshop CS4 and have just upgraded my Mac operating system to Yosemite with the newest version of Java 2014 running. When I try to access Photoshop from Bridge or directly open it asks for a Legacy Version of Java 6. As I am a pensioner I c

I have Adobe Photoshop CS4 and have just upgraded my Mac operating system to Yosemite with the newest version of Java 2014 running. When I try to access Photoshop from Bridge or directly open it asks for a Legacy Version of Java 6. As I am a pensioner I cannot afford an upgrade does anyone know of a work-around for this problem?

Hi Daddyfred,
CS4 Photoshop has not been tested on Yosemite. But still you can try the Java 6 update using the below link.
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase6-419 409.html
Thank you for posting on Adobe Forums.

Photoshop cs4 and cs5 and after effects 7.0

Hello my name is mel
My question ! I'm working with photoshop cs4 and after effects 7.0 building a web page and this going to be my first page . I got the header in and the footer also,
the main body is going to be this avi file. after effect project that I want to run when the page opens. I want to slice up and send to DW for coding . my question is how do you slice this page up and transport it to DW.cs5 and do you have to code the avi in html and css to run when the page is open. Because as now when you run the avi in photoshop nothing elese on the page works , just the avi runs when you turn off the avi then every thing is back normal .to run the avi you have go to the video part of psd and click on the start button . any idea or any suggestion how to proceded would help
thanks
mel
[email protected]

we were told in design school to use ps to design your site then transport to DW to code??
Maybe I misunderstood you.... You do the graphics in PS, that's of course what everyone does and then you code in DW, but by all means, you do not operate on the atrocious code Save for Web would spit out from PS. Trying to fix it is more trouble than starting with a blank page in DW and inserting the background and otehr images manually. And you definitely misunderstand "animation" vs. "video" After Effects is just a means to turn animation into video just as Flash is a means of creating dynamically rendered animation or interactive content. Both have their uses, but without knowing what kind of animation or video you actually need to produce, this is going nowhere. It may turn out that all you need is an animated GIF, after all... Furthermore your AE 7 is dated and does not output good H.264 or FLV directly compared to more recent versions, so this opens up yet anotehr can of worms when it comes to producing good quality web video at small file sizes... In any case, you still require a lot of reading. Too complex a topic for which nobody can provide a tippy-toe tutorial and without understanding even some basic concepts, the most beautifully designed PS grafik will end up being nothing more than a useless lump of pixels on a web server...
Mylenium

Photoshop cs4 and import to iphoto problem

Hi to all,
I would appreciate any help on this problem:
I process a raw file through camera raw 5.1 in photoshop cs4 and then save it as a jpeg.
I then try to import the jpeg file to iphoto, but iphoto says the file is unreadable and can't import it.
In photoshop cs3 I never encountered this problem.
The only way I can solve it is if i open the jpeg file in preview and save it again as jpeg. then i am able to import the new jpeg.
Any ideas how to solve this?
Thanks in advance for your help.

process a raw file through camera raw 5.1 in photoshop cs4 and then save it as a jpeg.
I then try to import the jpeg file to iphoto, but iphoto says the file is unreadable and can't import it.
That's because you're saving it inside the iPhoto Library package and trying to import from there. You must save all RAW edited files to the desktop or outside of the iPhoto Library package. iPhoto will not import any file located inside it's library package.
If you use CS4 to edit jpgs from within iPhoto the following may be of help to you:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Saving Jpeg in Photoshop CS4 and having problems

Okay, i have been looking all over the internet and i hope it's something really foolish...
After editing a photo in Photoshop (CS4) and saving it as a JPEG / JPG, many people using windows can't open the file, and it gets the extension .JPGG ( ...?... )
If I import the picture in Iphoto first and then mail it ther is no problem.
perhaps this is quite obvious to some, but it's a mystery to me.
To update my website i need to save my JPG files to an XML folder and then flash reads the files and opens them in the site.
The JPG files i saved using photoshop won't open in the site, even worse, the site won't even load because the loader gets 'stuck'.
i tried putting them in Iphoto first because that helped with with mailing, but it doesn't seem to be working this time.
I've tried all the JPG saving options like Baseline etc. converted them to RGB ( they already were) so i'm out of options.
ANYONE ?

Welcome to the Apple Discussions. I have CS3 so don't know if there's major changes to the formatting process by each version. That may be a question to ask in the Adobe support forum.
However, for a workaround you might try using the Automator workflow I created to change any image file to jpg with the sRGB color profile. Just drag the files onto the workflow icon and they will be converted. You can get it, "Convert to JPG and Embed sRGB profile", at Toad's Cellar. See if those jpgs will work OK. There will be some jpeg compression applied but if they are for posting on the web it may not be objectionable.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Photoshop CS4 and Firefox 3.6

It seems like my Photoshop CS4 and Firefox 3.6 are clashing if I run both programs at the same time. Am I the only one having this problem?

I'm usually running PS (CS4), Dreamweaver (CS4), Flash (CS4), and Firefox (3.6.2) all at once most of the day. I've got a MacBook Pro 13" with 2.26gHz Core Duo, 4Gb of RAM and I'm running a 23" HD monitor as my primary desktop with the MacBook display as the secondary. The only time I have any issues is when I'm doing all that and I open Windows 7 in VMWare & it sucks up all the processor it can get just to run.
By "clashing" what do you mean?
Are you unable to switch between the two?
Is your system slowing down with both open?3

Unable to Uninstall Photoshop CS4 and Dreamweaver CS4

it's been a couple of days since i tried out Photoshop CS4 and Dreamweaver CS4 to see how they compare to the CS3 versions, it worked fine and all till suddenly it stopped working, so i been trying to uninstall/reinstall to get it working under the free trial limit i still have left (27 days as of this writing) it still will not work.
Sometimes i would install Photoshop/Dreamweaver and say an error occurred and some components were unable to install and would be unable to load the file even after doing what the instructions say...
Same goes for when i try to uninstall both Photoshop/Dreamweaver, i would try to uninstall and would still remain in my program files...
I am completely stumped on what to do, i can't even re-install photoshop/dreamweaver cs3 as well due to this...
I am running on Vista 32bit SP1 Pack on HP Pavilion, i want to completely get rid of CS4 versions and go back to my reliable CS3 again, any help please would be greatly appreciated.
Kantori

John... if you read what I said you would of caught that i did do it:
"did what was suggested, worked like a charm for the CS3 and Dreamweaver CS4 but although it did work on Photoshop CS4. it did something i was dumbfounded to see, it did something odd in which it took out the Uninstall/Change tab option for removing programs (I was viewing it to see if it uninstalled completely) also it brought out a bunch of programs that weren't in that section before and was unable to uninstall/remove them.
So i had to do a system restore point to go back and try again. After doing it two more times (ya two!) still doesn't work, i am 7 hours into trying to resolve this... sigh. "
At that time i said i had done it 2 times, 3 in total, i am on try #6 all with the same results with the exact after effects once i restart my PC.
Here's what it does to tell what goes on:
1) after installing microsoft's cleaner then opening up the cs4 cleaner under admin, it does its thing, it asks me if i wish to remove Flash Player 10 after choosing remove Photoshop CS4, now here i done both remove Flash Player and not remove it with the same results, losing the uninstall/change option on the control panel, which frustrates me.
2) After seeing that i try to install Photoshop CS4 again, once its done, i open it up, try to go to the trial option where as i stated previously says there's an error and can't open the trial page which would open up Photoshop completely but since it can't i cannot go beyond that window.
3) So ya... i try ONCE again to do it all over after restarting and SAMETHING! no uninstall/change option appearing and unable to open up Photoshop CS4 in which i resort to doing a system restore again and trying once more.
NOW, one would think that after the first 3 times it should be working properly, i mean I thought it would after removing both Photoshop CS3 and Dreamweaver CS4 it's bound to do the same for Photoshop CS4, but it doesn't completely create a "FREASH" install. It's like it still remembers what messed up functions it still had and what's up with it removing the uninstall/change option? that just bogles my mind.
i tried many things, re-downloading the trial from adobe, etc i never would of thought just one program could cost me so much wasted time just to get it working and it's a free trial nonetheless so excuse me John Joslin if your remark kind of bugs me, I need some assistance/advice on trying to correct this problem, not a
"It should have done!
Run it a few times. "
comment that's already common knowledge for me in what I have already been doing long before your post.

Adobe photoshop,word, and excel won't open on my 2010 air mac

adobe photoshop,word, and excel won't open on my 2010 air mac. Message says I have lost my power pc connection. this happened while in Mexico

Adobe Photoshop CS2, MS Word 2004 and other PPC apps running in Snow Leopard Server installed into Parallels for use in Lion or Mt. Lion:
[click on image to enlarge]
More information here:
http://forums.macrumors.com/showthread.php?t=1365439

Am new to mac. Just purchased downloaded adobe photoshop elements and in order to open it, it wants a serial number. I downloaded it, so I don't have a redemtion number or a serial number. Obviously I am missing something; however I really do want to t

Am new to Mac. Downloaded Adobe Photoshop Elements and am trying to open it but they want a redemption code and a serial number. Since I downloaded it I don't have either of those but apparently I am missing something because I can't use it unless I enter that info and I don't know where to find it. Can you please help me figure this out. If I purchased the software I would have the serial number but as I said, I purchased and downloaded. Marianne

Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
-and https://forums.adobe.com/thread/1572504
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't reinstall the 2 missing programs. I want to install the softwares, therefore I down

Hi, Accidentally somebody screw up Photoshop CS4 and InDesign CS4 Master edition on a MAC computer in the school. The install discs did not start to run therefore I can't reinstall the 2 missing programs. I want to install the softwares, therefore I download those from here. The downloaded program refuse to accept the serial number which was given to the school when they purchased the Master Collection CS4 MLP A00. Thank you for your help, in advance.

Hi Jeff,
Thank you. I am a little bit busy at work, sorry for the delayed reply. I tried to solve the problem, but it still exists. The 3rd of the Adobe disk is damaged someway. I tried to run on my mac at home and it has a failure. So I think we have no other choice that to download the full pack of master collection. I had a discussion with the IT expert and he figured out that company does not exist any more from where they purchased the Adobe Master Collection for Mac and PC. So If you would be kind to help me, what kind of information ID or any kind of document would be needed to identify the purchaser institute (us). I don't think any of us has an account at the Adobe. I will try to figur out. I desperately need to replace Photoshop and InDesign as without them it's really harsh to teach the kids fot the graphic design.
Sincerely yours.
Peter

Does anyone know of any issues with photoshop CS4 and Mountain Lion?

Does anyone know of any issues with photoshop CS4 and Mountain Lion?

See here:
http://www.macrumors.com/2012/07/25/adobe-and-avid-report-only-minor-issues-with -mountain-lion/

Uninstall Photoshop CS4 and CS5

I have Photoshop CS4 and CS5 installed, CS4 also in x64 version.
Also Acrobat Pro.
I'd like to uninstall all Photoshop stuff only, i.e. not Acrobat.
Before proceeding: will the uninstall also remove all the 'other' Photoshop matters?
Bridge, Device Central etc.etc.
Thanks!
=

Hi
Uninstall the Adobe Creative Suite product through Add or Remove Programs Control (Windows XP) or the Programs And Features Control Panel (Windows Vista/Windows 7)
and select the program one by one and click on uninstall

More on Photoshop CS4 and Epson print drivers

I just got my Epson Stylus Pro 7900 with the SpectroProofer option. One thing the SpectroProofer enables is bypassing everything to talk to the printer directly. I made up a sample target (based on Bill Atkinson's RGB 5x12 Hues Target) and printed/measured this with the SpectroProofer. I then took the output printed by the SpectroProofer and measured this manually with MeasureTool and my Eye-One Pro (Rev B ). The average/worst correlation was 1.00/2.02 Delta E 2000, good enough for me given two different instruments and the SpectroProofer patches are a tad narrow for the Eye-One.
I then printed the same target with Photoshop CS3 and No Color Management and this compares well with the SpectroProofer output (0.69/1.90). So I have confidence that CS3 is passing the data directly.
I then printed the target again with Photoshop CS4 and No Color Management, same driver settings and get a CS3/CS4 difference of 3.22/10.25. I repeated the CS4 readings and get 3.21/10.29.
The odd man out here is CS4. The differences between the CS3 and CS4 printouts (remember both with No Color Management) are clearly visible. GIven that the Epson 7900 drivers are brand spanking new, I'm not expecting architectural changes in the short term so I plan to stick with CS3 for profiling/printing.

You may want to explore the solution given and explained by Eric Chan:
Eric Chan, "PS3 prints fine, PS4 prints too dark, same Mac" #12, 12 Dec 2008 6:07 am
Eric Chan - 6:07am Dec 12, 08 PST (#12 of 16) Edited: 12-Dec-2008 at 06:07am
Camera Raw Engineer
Essentially, with the newer Leopard APIs, the recommended approach is for a printer driver to register its printer profiles to the system (i.e., Leopard). That is, the driver needs to provide a default profile to Leopard so that Leopard can provide the appropriate color matching. The default profile provided usually is a function of the color mode (e.g., RGB color or black-and-white), media type, resolution, etc.
CS4 was updated to use the newer printing APIs (a requirement moving forward) and hence relies on the driver providing the correct default profile.
If the driver doesn't do this, then Leopard will provide its own default profile, which is obviously not the correct printing profile and will have the side effect of making prints appear too dark and possibly with a strong color cast.
(BTW, this is exactly what was going on with some Canon iPF printers recently with many users blaming Adobe for introducing printing bugs in CS4, when the real issue was the driver not correctly providing the default profile to Leopard. The issue was resolved a couple of days ago when Canon released an updated driver.)
The problem appears to be Leopard indeed, ironically because CS4 was
optimized for Leopard, while early versions are not.
The solution/workaround has worked for several users already, and it's certainly easy to implement.

Hi. My photoshop elements 12 has suddenly stopped working. When i tried opening it yesterday absolutely nothing happened. After a reinstallation I got to choose between opening picture browser or photoshop elements and when trying to open elements nothing

Hi. My photoshop elements 12 has suddenly stopped working. When i tried opening it yesterday absolutely nothing happened. After a reinstallation I got to choose between opening picture browser or photoshop elements and when trying to open elements nothing happens. Now I have reinstalled windows but still with the same result. I was using the program for several months without problem until yesterday when it suddenly stopped working. Any suggestions on what to do?

same question with PS11

Compare Adobe Photoshop CS4 and Elements 7

Hi,
I need to compare features of Adobe Photoshop CS4 and Elements 7.
I need to know how CS4 can be better than Elements 7 and viceversa.
It will be very helpful to know this information.
Thank You

Elements 7 uses the base code from CS3 so you won't find many comparisons to CS4. If you google around there are a ton of comparisons between PSE 7 and PS CS3, though.

Photoshop CS4 and iMac(ATI 4850) Open GL problem?

Similar Messages

Maybe you are looking for