Photoshop cs4 doesn't work properly.

I'm a photoshop cs4 user, my photoshop won't open any psd file.
It shuts down after openning a file.
There was no problem a few months ago.

Without proper system info and other technical details like what the files specifically contain, where they are stored, your PS swap file preferences and so on nobody can tell you anything. from the files being damaged to containing references to e.g. flaky fonts to PS not being able to create its temp files there could be any number of things at play here.
Mylenium

Similar Messages

Photoshop CS5 doesn't work properly after opening too many images

Hi
This is my very first post.
I'm also new to CS5. I do hundreds of photo touching/cropping that is a part of my job for web.
Everything is running fine but when ever I open too many images in Photoshop CS5 it doesn't work, I mean it doesn't hang or freezes it just open all files and then doesn't show any images (just blank) and when I closes 20/30 or more images then it get fine.
I thought it might a RAM problem but i have i3 processor with 4GB of RAM. I have also increased memory usage from 60% to 80% but I'm still facing the same problem.
Would like to tell that in the previous version of CS3 I never got this problem and worked fine.
thanks
--Venkat

Disabling OpenGL entirely is draconian.
You could try, if it's not already set that way, going into the Advanced settings and switching OpenGL to "Basic" mode, which uses fewer resources.
-Noel

Photoshop Cs4 doesn't work :(

Hi! I'm italian, excuse me because I don't speak English very well!
I have this problem with Photoshop CS4:
my operating system is windows vista 64 bit,I has installed many times the version of test of Photoshop Cs4, the installation goes to good, but in the moment I try to use Photoshop, windows says me " the program has stopped of work" and it is closed all…
I have watched in the visual display unit of events of windows, in the section registries of windows and the error that appears is the following one:
" Application that it has generated the Photoshop.exe error, 11.0.0.0 version, timestamp 0x48d3882e, module that has generated the error nvoglv32.dll, version 8.17.12.58 96, timestamp 0x4c378f09, code exception 0xc0000005, offset error 0x000a85db, ID process 0xe14, date and hour of start of the application 0x01cb706c671eed10."
I hope that someone can help me, thanks!

Hi Mylenium! Thanks you...but in that way I can adjust my configuration? And which configuration?
And when you say: "install a newer one", you refer to Photoshop? Because I have installed many times it.
Excuse me for all these questions and for the disturbance!

Premiere CS4 doesn't work properly with Windows 7 trial - Please help!

Hello!
I have installed the trial version of Windows 7 on my laptop and now my Premiere CS4 doesn't play the timeline in real time anymore. It worked fine with Windows Vista. I have also installed the newest Premiere update, but it didn't help. Is there a patch for Windows 7 (64bit) or will I have to wait until the full version comes out and try it again then?
Thanks in advance for your help.
Rafiki

It's a laptop and probably an older one, that means it is probably underpowered.
It's a laptop and that probably means it is a single 5400 rpm disk which is inadequate.
Bill,
Probably good observations. I tend to loose sight of the fact that most laptops are not like mine and forget the common limitations. One mentions "laptop," and I see my Sager - duh! on me.
To the OP, this ARTICLE might also offer some tips on getting your computer ready for an NLE session. Common references are to how things are done in XP-Pro (my OS), but you should be able to "read between the lines," and adapt the general concepts to Win7 and your setup.
Also, giving full specs. on your laptop might help greatly, otherwise we're all just guessing. Bill brings up a couple of critical points. Your details will either point to them, or dismiss them.
Good luck,
Hunt

In photoshop cc is not working properly right button on the tablet stylus genius

in photoshop cc is not working properly right button on the tablet stylus, when clicked, the menu appears and immediately disappears in Pshotosho CS6 everything was OK, and in other programs all OK.
Tablet - Genius G-Pen M712X.

have you participated on here before, smihop? -- do Adobe representatives ever provide a solution? I pay monthly for all adobe cloud applications <-- doesn't it seem like that should come w/some kind of support? (especially when they push out buggy releases <-- which make me wish I could go back a version)

Font in CS4 doesn't work in CS6

I have a TrueType font that a friend made me a few years back. It's my favorite font and I use it frequently; however, I recently upgraded from CS4 to CS6 and the font doesn't work properly in CS6. It does show in the font menus, but now in CS6 it's sorted in a separate font category (along with the Arabic fonts at the bottom), and the sample in the font menu is now merely squares in place of characters. There is a Regular and Bold verison of the font and both have the same issue.
What changed in CS6, and does anyone know how I can edit the font to make it work with InDesign again? I know I can just pick a new commercial font, but I have such a back log of work that used that font I'd prefer to just fix the font. This is on a Mac, and FontBook validates the font just fine, other apps (including CS4 also work fine with it), I'm not using any font management software (I use FontBook merely for validating the font.)
Any insight would be greatly appreciated.

Thanks for the reply Peter.
I was able to fix 1 of the 2 problems. The font did in fact have some extraneous language entries in it's name table. I was able to edit those out and now the font sorts in the normal font list, and not in the Arabic font category.
But the font preview feature in the font menu is still showing boxes (instead of characters.) This is where it gets weird... if I go into Preferences and change the Font Preview size from Medium to Small or Large it works correctly. Just not with Medium (the default.) I've tried clearing font caches, etc, but I could at least live with small or large font previews in order to use the font with CS6.
To answer your question, the font does work correctly when setting type; however, if Font Preview is on the font will eventually be automatically disabled and drop out of the Font menu. Relaunching InDesign CS6 brings it back. Turning off Font Preview prevents this from happening.
I wonder what is different in CS6. Other apps work fine with this font (including CS4.) Even apps like Pages that also have font preview in their font menus.

CS4 doesn't work after LION installation

After the Lion installation i had several problems.
One of these is that the cs4 doesn't work.
i open illustrator or photoshop and they crash every time. "photoshop not responding" "illustrator not responding" and so on..
I had to reinstall all the suite that now works.
The question is... why??
I thought is is better to format the mac... should i do ?
thanks

Another problem is:
When I start the Dropbox Application, it uses nearly 90% of the CPU as well, so the mac heats up, in a way that it is not possible to use the dropbox application...
(The Icon of the VLC Media Player only jumps up and down in the dock, and nothing else happens)

Premiere CS4 doesn't work on Windows 7

I have a delicious new Windows 7 edit suite I built for nearly 3 grand, and Adobe Production Premium CS4.
Premiere doesn't work properly.
I urgently need to edit a TV documentary. I don't have time to mess around, that's why I paid for the software rather than pirate it or get something like Vegas or Pinnacle.
I try and load my Premiere project and the thumbnails for my clips are grey and the program freezes when I try to view them.
Importing the project into a new project does nothing.
I just lose response as soon as I try to play some of the clips (about half of them)
All of the clips are on a local, high speed hard drive.
I have downloaded all Window's latest updates.. Same with Adobe..
This software is fairly disgusting. I've been struggling with Adobe Premiere for many years, especially on larger projects that aren't SD DVD-AVI format.

Hi Guys
I tried doing the benchmark thing but failed-
followed the instructions on the webpage, but found afterwards that they didn't match the instructions in the RTF file..
Couldn't get the script to work- runtime error.
However, project launched in around 11 seconds, rendered in I think less than a minute, and exported both formats in about 36 seconds.
Is that useful?
I am struggling to find any more time to work with this benchmarking utility.. thanks for bringing my attention to it though.
HDD setup is
System SSD
3 x Spinpoint F3 (not in RAID as I'm struggling setting it up without wiping Windows from the SSD...)
Asus P6TD
Graphics card is the weakest link here - 8500GT, until I can afford to upgrade.. Think it has latest drivers though.
X-Fi Xtreme Gamer soundcard (very recently installed)
I do indeed have a Logitech mouse, it's using SetPoint, latest version with UberOptions.
It seems like this project is nothing less than corrupted. But nothing is helped by me importing it into a fresh project... my steps:
1. Load Prem CS4 (latest update)
2. Load Promo.prproj
3. When loaded, it takes an additional ~15 seconds of busy disk activity, loading thumbnails in the timeline etc, which it normally never does on this machine. Finally, offline symbols change to thumbnails in the project/bin pane
4. If I scroll down in the project window, the lower clips have no thumbnails and suddenly everything's fallen apart; the monitor is black, the source monitor is frozen... Sometimes Prem says not responding..

Trouble with the PS CC2014 3D Effects - Intel HD Graphics 3000 that doesn't work properly?

I Have a MBP 13 inch 2.8 GHz Intel Core i7 late 2011 and I'm Having trouble with the PS CC2014 3D Effects crashing when trying to apply a New 3D extrusion, are there any solution regarding the Intel HD Graphics 3000 that doesn't work properly?
Thanks!

Look at this document. It should help you troubleshoot and it suggests settings to try out.
Photoshop CC and CC 2014 GPU FAQ
While the stock advice for Windows users is to go to the Intel site for updates, Mac users can only get their drivers in the Mac OSX system updates. So you need to be sure your OS is up to date. If you have an earlier version, like 10.7 or 10.8, it is possible an upgrade to 10.9 might help.

Adobe Photoshop CS4 has Stopped Working on Windows 7

Hey guys and girls. I recently got a new computer running Windows 7 64bit. I still have good ol photoshop cs4 and wanted to use it on this new computer. The install process was completed and as I started the program, I get the "Adobe Photoshop CS4 has stopped working" box. I've looked through some forums, and a lot of them mention the wacom tablet issue, which is not the issue since I've yet to install the drivers for my tablet. Has anyone come across this problem at all? This is what shows up when I get that error box.
C:\Users\Administrator\AppData\Local\Temp\WERCA9F.tmp.WERInternalMetadata.xml
C:\Users\Administrator\AppData\Local\Temp\WERE1B8.tmp.appcompat.txt
C:\Users\Administrator\AppData\Local\Temp\WERE246.tmp.mdmp
Please help, thanks in advance

The first thing that I would do is insure that you have the latest video driver installed (but do keep any older ones, just in case you must roll-back - newest is not always the best).
If that does not help, then open Even Viewer, and check for all warning, or error messages in System and Application tabs, for the time that PS crashed. If you find any with links, follow those links - be patient, as some might take a few moments to send data to MS, and then for MS to process it, to open the proper page for that link plus the data gathered. This ARTICLE goes into a bit more detail, and I do not think that it is too Adobe Premiere-centric.
Good luck,
Hunt

My palm m105's touch screen doesn't work properly after a sync.

I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
Thanks in advance!
Post relates to: Palm m105
Post relates to: Palm m105

Maldoman578,
Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
EfrainM_VZW
Follow us on Twitter @VZWSupport

My Safari doesn't work properly after installing Lion. Don't like it, how can I uninstall? (Cloud not worth it)?

I upgraded ti Lion 10.7.2 for icloud but it's causing other problems with my mac. My Safari doesn't work properly anymore. Wishing I didn't upgrade, anyone know how to fix this or do i just have to uninstall? Thanks,

Wipe the drive clean and install Snow Leopard from your install disk.
Might be less work fixing Safari. Try Resetting Safari.

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly. Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again. Is there any solution?

I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?

Hey, There are afew things you can try.
- Simply turn your phone off and back on again
- Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
- Back up your iPhone to your PC, then restore it..
this ones last cause I think you may have tried it already..
- Close all open applications
Hope this helps!
Kieran.

HT1923 The sync function on my iPod Touch 3rd generation doesn't work properly. My OS is up to date, but some of my podcasts won't transfer onto the iPod, and it won't delete ones I've already listened to.

The sync function on my 3rd gen iPod Touch doesn't work properly. It won't sync all the podcasts I've downloaded, and it won't delete ones I've listened to and deleted on iTunes.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

What can I do if my CD or DVD drive doesn't work properly in Windows 8?

QuestionWhat can I do when if my laptop CD or DVD drive doesn't work properly in Windows 8?
AnswerNote: For help with this issue in Windows 7, please see this article.
To get your CD or DVD drive working correctly, try these suggestions in the order listed.
Reinstall the Driver
Hold the Windows key and press the 'x' key to open a menu in the lower-left. In this menu, select "Device Manager." Expand "DVD/CD-ROM drives." Right-click the entry for the CD/DVD drive nested under "DVD/CD-ROM drives," then select "Uninstall." Finally, restart the computer. The computer will reinstall the drivers for the drive.
Power Cycle
Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with some hardware problems. Perform these steps to complete what’s called a power cycle.
Ensure the laptop is turned off.
Unplug the laptop's AC power cable.
Unplug all wires and peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
Remove the battery (if the model has a removable battery). If the model does not have a removable battery, check your user's guide to determine if you have a pinhole reset on the bottom. If you do, press this.
Hold down the power button for thirty seconds.
Reattach the battery if removed.
Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
Connect the other end of the AC adaptor to your computer.
Start the computer and test the drive
Microsoft Fix-it
Your computer may exhibit one or more of the following symptoms:
Your CD or DVD drive no longer appears in Windows
Your CD or DVD drive does not read or write and is shown as disabled
The media in your CD or DVD drive cannot be read
The media cannot be written to a CD or DVD inserted into the drive
You receive an error message about your CD or DVD drive
If any of these symptoms apply to your computer, use Microsoft Fix-it troubleshooter available here.
System Restore
Try using System Restore to restore to the most restore point from before the problem arose.
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
System Recovery
If the System Restore doesn't solve the issue, you could try a System Reset. Resetting your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system reset will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide.
For more information on performing a recovery, see the following article:
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
Contact Customer Support
If the drive doesn't work after performing a recovery, it may be due to hardware failure. Please call customer support or seek servicing.

See this Microsoft article - http://support.microsoft.com/kb/314060/en-us For ways to fix manually
and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
(these are from the Microsoft article)
Resolution 2: Use the CD/DVD Fix it troubleshooter
To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
Windows 7, Windows Vista and Windows XP
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
If your problem is not solved, try the next
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Photoshop cs4 doesn't work properly.

Similar Messages

Maybe you are looking for