PhotoShop CS4 Fatal Error on Mac

Hi,  Can anyone help with Photoshop CS4 issue on Mac OS 10.6.8?
Getting— 'Fatal Error' missing component/library/applications/adobe version cue CS4/client4.0.0/version cue.framework  —  message when I try to open a file
Before this, with the help of Gene7 i was able to re-activate with license recovery. Worked until I tried to open a file. Updates seem current...
Thank you.
Monte

That library is missing. You need to reinstall the application (and updates) to replace the missing files.
Most likely this is because you used Apple's "migration" tool, which doesn't copy all support files needed by applications.

Similar Messages

  • Photoshop CS4:Fatal error

    This pops up when I open my Photoshop CS4:
    Fatal error - missing component: /Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework.
    Any ideas on what i can do? happens when I open a project.
    Thanks

    Ok, after reading tons of threads trying to get a simple answer here are the main points:
    You do not need to reinstall anything.
    Locate a backup , Time Machine or anyplace where you may have a backup of your Adobe Suite Install.
    In both Locations( Hard Drive and Backup) Navigate to: Macintosh HD > Library > Application Support > Adobe > Adobe Version Cue CS4 > Client
    Once there you will see your problem Adobe is looking for  folder named 4.0.0 and you have 4.0.1
    Fix: Find the backup and copy over folder named "4.0.0" , Problem solved!
    Open up Adobe Photoshop CS4 and problem should be fixed.
    Observations:
    Upon inspecting folder 4.0.1, I did notice there were exactly 5 (.framework) files just like in folder 4.0.0 with the exception of 4.0.0 having a "Dictionaries" folder. where 4.0.1 has this folder missing. I am not sure how important this particular folder may be, However if by any chance you do not have a backup It might be possible to just change the 4.0.1 folders name to 4.0.0. and this just might work, In theory that is . Good Luck!

  • I migrated photoshop CS4 onto my new mac laptop. Error message on startup: Licensing for this product has stopped working. Error: 150:30

    I migrated photoshop CS4 onto my new mac laptop. Error message on startup: Licensing for this product has stopped working. Error: 150:30 What do I do?

    Uninstall and run the Cleaner Tool
    Uninstall Creative Suite 4 and point products (Mac OS X)
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • How do I correct an "undetermined error" when trying to reload Photoshop CS4 remotely on a Mac Air?

    How do I correct an "undetermined error" when trying to reload Photoshop CS4 remotely on a Mac Air?

    Hi dsalacain,
    Are you trying to run the setup from network location. If yes please copy the installation file to the desktop of the Mac and try installing again.
    Regards,
    Romit Sinha

  • Photoshop CS4 program error: deleted prefs, keeps coming back instantly

    I am running Photoshop CS4 extended on my Mac OS X 10.5.6 OS. Out of no where, I create a new file, try to fill a layer with a solid color, I get the generic program error message. I click OK to get rid of it, but it is erratic. I have to force quit the program.
    I deleted the pref file manually as well as Apple + Option + Shift keys while loading the program and had Photoshop delete it for me.
    What other files do i need to delete/reset for this to work properly again?
    My computer:
    Mac Pro Dual Quad (octo)
    12 GB of ram
    I pulled up activity monitor and it isn't using much memory.

    sounds like a bad directory I would run Diskwarrior or disk utility of the OS install DVD

  • Photoshop CS4 Extended - error 150:30 - "LicenseRecoveryLauncher" not supported on Mac OSX Yosemite 10.10

    I recently upgraded to Mac OSX Yosemite 10.10
    When I try to open Adobe Photoshop CS4 Extended it says error 150:30 Licensing for this product has stopped working.
    I followed the help advice which says to download some software to mend the problem but it wont launch - error message You can’t open the application “LicenseRecoveryLauncher” because PowerPC applications are no longer supported.
    How can I fix the problem?

    OS 10.7 and above uses the python script (.py) which is included in the License Recovery kit.
    Mac OS X 10.7
    a. Double-click the LicenseRecovery111.dmg
    Note: Leave this window open and proceed to the next step.
    b. Double-click your Hard Drive.
    c. Double-click Applications.
    d. Double-click Utilities.
    e. Double-click Terminal.
    f. Type “sudo python “
    Note: There is a space following “python”. Do not press Return.
    g. Drag LicenseRecover.py from the LicenseRecovery folder onto the Terminal Window and press Return. Note: Make sure that the Terminal window has the command and the path to the APP file. For example: "sudo python /Volumes/LicenseRecovery\ 11.6.1/LicenseRecovery/LicenseRecover.py”
    h. Enter your administrator user name and password when prompted and click OK.
    i. Follow the onscreen instructions.

  • CS4 Fatal error- missing component

    I just recently transferred my CS4 onto my new Mac desktop. Now, everytime I open CS4 I get the following message, Fatal error - missing component. I can push ok, and go onto my editing in phohtoshop,
    but once I try to save or save as any kind of file, it tells me, can not complete your request because of a photoshop error. Is there anything I can do to fix this problem?

    If I un-instsall and reinstall the app will I still have it on my computer, or will I need the serial number or anything, or will my computer still recognize it?
    I just don't want my CS4 to get lost, and I'm afraid I might not be able to find my serial # I have for my photoshop to reinstall. Not sure what reinstalling consists of.

  • Please can someone help me. I need to get Photoshop CS4 to open in Mac Yosemite.

    Can anyone help. I am writing iPad notes for SeniorNet Mac using the latest version of Pages in the Yosemite side of my partitioned  Mac and I need to edit a lot of photos and I have to keep going back to SnowLepoard to open Photoshop CS4 and then put them into Dropbox. as I keep on getting error 6 in Yosemite. I have downloaded Jarva 6 but it still won't open. Any ideas?  Thanks  Barbara

    Yosemite sometimes has problems, often related to "default" permissions needing to be changed
    -one person's solution https://forums.adobe.com/thread/1689788
    -http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/
    -https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html

  • New Computer, CS4: Fatal Error Missing Component

    Hi,
    I have a new Macbook Pro. I transfered all my programs, including Photoshop CS4 extended, from my old Macbook to the new one. Whenever I try working on...ANYTHING, I get the following message, and then CS4 closes:
    Fatal Error  Missing Component
    /Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.framework
    Help!!

    PapaRoll wrote:
    I tried, but keep getting this:
    HTTP ERROR: 404 /support/downloads/dlm/main.jsp
    RequestURI=/support/downloads/dlm/main.jsp
    You must precisely follow the instructions on the download page, otherwise you'll get a 404 instead of access to the files. The download page has countless comments from people who don't follow instructions and get a 404.

  • Adobe Photoshop CS4  runnig error - cant  load files

    hi,
    ive first time installed adobe cs software in my pc. i have never used this software before nor its previous version.
    when i try to run adobe photoshop cs4 - it gives me error after loading for few things that "A required application library failed to load and the product cannot continue, please re-install the application"
    ive re installed the application several times but that same error continues.
    any help will b welcomed
    thank you

    OK. This error drove me nuts and I have seen a thousand different "solutions" posted on various forums (none of which actually worked), but I think I found the magic bullet for this problem. This appears to be a result of corrupted/missing language pack files. Here's what I did to resolve it once and for all!
    You should already have a folder somewhere with the contents/Setup.exe for CS4 Design Premium
    Download the trial version of Adobe Photoshop CS4 Extended
    Unpack the contents to a folder/directory somewhere on your PC
    You will NOT be installing the Photoshop CS4 Extended application - only copying some files.
    Copy the "extensions" folder from Photoshop CS4 Extended, that you just downloaded to your CS4 Design Premium folder (there should be an "extensions" folder already there as well)
    Select yes if prompted to replace existing files/folders.
    Double-click the Setup.exe in your CS4 Design Premium directory and re-start the installation of Photoshop from there.
    Problem should be solved.

  • Adobe Photoshop CS4 Installation Error

    I'm new to this site and my computer has Vista Home Premium Service Pack 1.
    After I installed Photoshop CS4 trial, it failed to install Photoshop, but the rest were successful. I went to get more information and this is the message:
    Adobe Fonts All
    Error:
    Error 1603. Error 1907.Could not register font . Verify that you have sufficient permissions to install fonts, and that the system supports this font.
    Adobe Photoshop CS4 English Language Pack
    Error:
    Error 2.
    If there is a topic similar to this one, then I shouldn't be here!

    I have been using Adobe Photoshop CS4 for a few months now without any problems or errors.
    But last week.. i had a virus problem and decided to do a Clean Installation of my Operating System.
    I was not too worried because I have done this millions of times already... and know the process like the back of my hand.
    Well.. after the clean installation was complete, i started to load my applications.
    To my surprise.. Adobe Photoshop CS4 would not install. Nor would Adobe Illustrator CS4.
    It would get to the screen "Adobe is beginig the installation process" and would stall ..
    At first... i thought it would eventually complete on it's own.. but after a few attempts and hours of the same screen with no progress.. it was obvious Adobe was no longer responding at that stage.
    I searched high and low, night and day, over a few days trying to figure out the problem.
    I was trouble-shooting everything.
    In the middle of trouble-shooting, i took a break to surf the Net and see if i could find any suggestions when i ran into this Forum.
    Someone mentioned disabling your Internet Security & Windows Defender.. and i thought.. no way.. it can't be that easy.
    Well.. what do you know.. it was my Internet Security (Kaspersky Internet Security 2010)
    After disabling Kaspersky Internet Security 2010, Adobe flew right pass the part where it was stalling, and finished installation without incident.
    Adobe Illustrator CS4 also installed without any problems ...
    I just wanted to share my experience as i know how frustrating it can be when software refuses to install.
    Good Luck to everyone.. be patient.. trial & error. .. and im sure you'll figure it out.
    ========================================================================================== ===============
    ApologetX wrote:
    "downloaded Photoshop CS4 here and i tried to install as trial (30 days), Error: "Please insert Photoshop C4 into drive E:/ to continue instalation" what's wrong? What should I do? To install free trial? Tks"
    @ ApologetX
    I had a similar problem when i extracted the contents of my Adobe DVD and made an ISO file out of it so i would no longer need the DVD for installation.
    But what i realized is that.. Adobe will not install if it's installed from the ISO.. and during installation.. an error would pop up.. and ask for the DVD
    You probably have done something similar.
    Here's what i did to fix:
    - Extract the contents of Adobe Photoshop CS4 into a Folder
    - and install from that ..
    After i extracted the contents and installed from "setup.exe" .. the installation completed without error ..
    DVD
    - If you're having problems from the DVD .. then try to extract the Contents of the DVD on to your Desktop..
    and install from there ..
    Trial Installer
    - As for the Trial you are referring to .. im not familiar with it ..
    but try to extract the contents of it to your Desktop .. and go from there ..
    Good Luck

  • Photoshop CS4 - Licensing Error 150:30

    I have a MacBook with the OS X Maverick Operating System and have had no prior issues using my Photoshop CS4. My computer recently crashed and had to have my operating system re-installed. I tried to open up Photoshop today and this window popped up: "Licensing for this product has stopped working". I tried restarting the computer like the window mentioned and that did nothing. I also tried the solutions listed on the Adobe website for the Error: 150:30 and nothing has worked. My main problem is I cannot finish the "solutions" because I cannot locate the folder "FlexNet" or "FlexNet Licensing" or anything of that nature that is referred to in the solutions.

    The Licensing repair tool does work. OSX 10.7 and above:
    Download and open LicenseRecovery111.dmg on your Desktop
    Open Terminal and type sudo and leave a space. <do not press "Enter" yet>.
    Open the License Folder on the opened LicenseRecovery111.dmg and drag
    "LicenseRecover.py" file into the Terminal Window.
    The sudo command and path to the .py file should look like the screenshot below.
    Press Enter to begin
    Type in your password, but know that you will not see dots or asterisks as you type.
    Press Enter again, let the script run and finish. You should be able to run Photoshop now.
    (If this answer solves it, mark it as "correct" or get back to me if it doesn't.)

  • Photoshop CS4 "Program Error" when using Text tool

    Hello. I was having problems with Photoshop displaying a "Program Error" every so often, so I deleted the preference file and all seemed good. But after deleting the preference file for my Photoshop CS4 and re-launching Photoshop, the text tool causes Photoshop to display a Program Error when using the tool. It never did this before. Should I reinstall Photoshop? I am using a Powermac G5 running 10.5.8. I have already tried repairing the disk permissions.
    Thanks

    Thats kinda what I thought too, but the problem started happening randomly. It started when we were trying to use photomerge with large photos. The program just started giving the program errors. I still think it may be a font problem, but without going through my 2000+ fonts and disabling them one by one, how can I resolve this issue?
    Thanks

  • Can't view Camera RAW files in Bridge or Photoshop CS4 after upgrading to Mac Mavericks X OS.

    After upgrading my Mac operating system to Mavericks X I can no longer view Camera RAW images on either Bridge or Photoshop CS4!
    I'd already fixed the issue of not even being able to launch Photoshop by installing Apple's Java applet, but this doesn't seem to have helped with the Camera RAW situation.
    I've tried invoking "Update" in both Bridge and Photoshop, and both indicate there are no updates.
    I even went to Adobe's Camera RAW area, and downloaded and installed the Camera RAW plugin specifically for my cameras (Canon 5D Mk ii) and Photoshop CS4, and that hasn't helped at all!
    I feel that it's just another silly Java applet, but I haven't any idea how to proceed from here!
    HELP!
    Thank you,
    Bob

    Did you download and install the camera raw 5.7 update?
    Adobe - Photoshop : For Macintosh : Camera Raw 5.7 update
    There are also other updates you should install, such as 11.0.2 for photoshop and the bridge output module update, if you need them.
    Product updates
    Adobe - Bridge : For Macintosh
    Adobe - Creative Suite : For Macintosh
    Adobe - Photoshop : For Macintosh

  • Photoshop CS4 extended Error 150:30

    I have reinstalled Photoshop CS4 extended on my new hard disk as it was replaced by apple, and it now won't open, showing Error 150:30. What do i do?

    Please see this link: http://forums.adobe.com/message/4752665

Maybe you are looking for

  • Attributes in member formula

    I want to run a simple member formula but fix it on only entities that have a certain attribute: "Comp". I have a BSO cube partitioned with an ASO cube with the following member formula: ================================================ In BSO: IF("Re

  • How to get Backend (R/3) system type

    Hi team, Currently backend (R/3) system details are maintained in SPRO ->Supplier Relationship Management ->SRM Server -> Technical Basic Settings -> Define Backend Systems. Here we maintain entry of logical system, its description, RFC Destination,

  • Search Messages in Archives

    Hi all, we have enabled archiving and can use TA SXMB_MONI and the RWB to view the messages and search by message ID. What we also need is a capability to search in the archived messages by sender and receiver, interface and other. We are not using T

  • Submit button don't commit field data to database

    Hello, I am working to fix a problem in apex. The problem that I have is that the submit button doesn't work propertely. When the form is running,  I select a row in the tabular form, change value in the  independent fields to Y, click the submit but

  • Search help for WBS element on timesheet

    Hi, We are using EA-HR 6.00 (webdynpro) Is it possible to change the search help for the WBS Element field that appears on the Record Working Time timesheet? There appears to be a table called TCATS_SHLP_ITS, but is this not for the old ITS version a