Photoshop CS4 in Comms Suite 2 has stopped working when loading

I wonder if someone can help me as I am not technical. I have a copy of Adobe Communication Suite 2 (this is basically CS4 version). I've installed this and every piece of it will load except for Photoshop (the bit I really want and need today!). I get an error message which says Adobe Photoshop has stopped working. Not sure what to do and I've loaded and unloaded this several times and also used some download from Adobe which is supposed to take away install problems but that had no effect!
Any help would be appreciated if anyone knows anything about it.
PS I have tried to load in Administrator mode and I get the same error message.

You'll get more help in the Photoshop forum. Try there with full details.
Bob

Similar Messages

  • Photoshop CS4 "licensing for product has stopped working" after restoring backup to new laptop

    I purchased a new macbook pro running os x 10.9.3 and restored from a Time Capsule backup from my older laptop also running the same OS version.  (Migration assistant was not working and this was Apple's recommendation).  Now Photoshop CS 4 gives the following error "150:30 licensing for this product has stopped working". I've tried the Adobe recommended steps i found on their site short or reinstalling.
    So my question is "what's the phone number for adobe support?"

    800-833-6687  Monday—Friday, 5am—7pm PT
    I have had this same problem before. The problem is that restoring from backup or migrating Photoshop CS4 breaks the licensing.
    You normally get a 150:30 error.
    Two ways to fix this:
    10.7 and above: Run the python script in Terminal to repair this, or reinstall CS4 from your disks.
    If you need help on this let me know.

  • Photoshop CS has stopped working when loading

    I wonder if someone can help me as I am not technical. I have a copy of Adobe Communication Suite 2 (this is basically CS4 version). I've installed this and every piece of it will load except for Photoshop (the bit I really want and need today!). I get an error message which says Adobe Photoshop has stopped working. Not sure what to do and I've loaded and unloaded this several times and also used some download from Adobe which is supposed to take away install problems but that had no effect! Any help would be appreciated if anyone knows anything about it.

    Right click on the Photoshop CS4 in the start up menu, click on properties, click on compatibility tab, and check run as Admin. Hit apply and ok to close out. Then restart CS4.
    Since this is a suite maybe this forum can help you out better:
    http://forums.adobe.com/community/creativesuites/creativesuites_windows

  • Help? get plus + (R) has stopped working when loading Flash player

    When trying to install flash player - I get this message and then it says a problem has stopped the programme working properly. Windows will close the programme and will notify me if a solution is possible. Now stuck as nothing happens
    Any advice?

    Hi, what operating system, and browser(s) and versions?
    What Anti-Virus/Firewall do you use?
    Thanks,
    eidnolb

  • Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue.  I have reinstalled the program to no avail.

    Why do I get this error message when I open Organizer in Photoshop Elements 11 "Elements Organizer has stopped working"? My only option is to Close Program so I am effectively locked out of my photo catalogue. I have tried reinstalling the program but it made no difference to the error message.
    Could someone help please?  Steph

    Hi,
    Please give a try to Photoshop Elements (PSE) knowledge base. steps mentioned on this and see if it works.
    Regards
    Kishan

  • Photoshop elements 7.0 (organizer) has stopped working, how do I fix this?

    photoshop elements 7.0 (organizer) has stopped working, How do I fix this?

    Start PSE to get to the Welcome screen.
    Hold down the Ctrl, Alt, and Shift keys and click Organize. Keep holding down the keys until you see the Catalog window.
    Select your catalog and click Repair.  Select “repair anyway” even if PSE doesn’t find problems.
    Then for good measure, click Optimize.
    If repairing resolves your issue then fine else repeat the above steps, but click New to create a new catalog.  If you’re able to import photos into the new catalog and the Organizer works fine, then problem can be old catalog.
    In that case you can try regenerating the thumbnails.  Do Show All, Edit > Select All, and then Edit > Update Thumbnail.
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402592&sliceId=2
    -Garry

  • Nokia Suite has stopped working

    Above is the now dreaded message I constantly receive everytime I try to sync my Calendars and Tasks between my Windows 7 based laptop and Nokia C7 mobile phone. This started around the time that I updated to the latest version of Nokia suite 3.5.34. This is one of the most important aspects of my syncs. I uses this for work and I've spent the last few days desperately trying to find a solution. 
    What I've done so far:
    Started with trying to repair Nokia Suite through Windows 7 uninstall programme (did this several times throughout process)
    Also tried to repair sync through Nokia suite (also several times)
    I then deleted Nokia Suite (using Windows 7 uninstall programme along with Device drivers etc)
    Then re-installed Nokia Suite
    plugged in C7 and re-installed Device drivers etc.
    Deleted all Calendar events on my Nokia C7
    Re-installed Nokia C7 software through Nokia Suite (after saving everything important)
    Deleted Nokia Suite again and installed Beta version
    Deleted Beta version and all files under /Appdata/Nokia etc
    Installed fresh version of Nokia Suite 3.5.34 from Nokia website
    Installed c7 device drivers
    Sync..... 
    message still there... Nokia Suite has stopped working, Windows is checking for a solution to the problem. The final messages reads something like 'A problem caused Nokia Suite to stop working....'
    WHAT PROBLEM!!!???
    I've spent too many hours trying to sort out this.
    I've sent several logged reports directly to Nokia through the Nokia Suite system.
    If anyone has some ideas on what might be the solution to this frustration I would be very grateful.
    Oh... and another thing. I've also deleted and re-installed several calendar events that I'd recently entered into my Outlook calendar, just in case there was something going on there.
    Not to mention the numerous times I've used the Windows troubleshooter to try to figure this things out.
    Sigh... I'm not daft, but this is ridiculously complicated for something that is meant to make life simple.
    Many thanks in advance.
    Máire

    Above is the now dreaded message I constantly receive everytime I try to sync my Calendars and Tasks between my Windows 7 based laptop andNokia C7 mobile phone. This started around the time that I updated to the latest version of Nokia suite 3.5.34. This is one of the most important aspectsof my syncs. I uses this for work and I've spent the last few days desperately trying to find a solution. 
    What I've done so far:
    Started with trying to repair Nokia Suite through Windows 7 uninstall programme (did this several times throughout process)
    Also tried to repair sync through Nokia suite (also several times)
    I then deleted Nokia Suite (using Windows 7 uninstall programme along with Device drivers etc)
    Then re-installed Nokia Suite
    plugged in C7 and re-installed Device drivers etc.
    Deleted all Calendar events on my Nokia C7
    Re-installed Nokia C7 software through Nokia Suite (after saving everything important)
    Deleted Nokia Suite again and installed Beta version
    Deleted Beta version and all files under /Appdata/Nokia etc
    Installed fresh version of Nokia Suite 3.5.34 from Nokia website
    Installed c7 device drivers
    Sync..... 
    message still there... Nokia Suite has stopped working, Windows is checking for a solution to the problem. The final messages reads something like 'Aproblem caused Nokia Suite to stop working....'
    WHAT PROBLEM!!!???
    I've spent too many hours trying to sort out this.
    I've sent several logged reports directly to Nokia through the Nokia Suite system.
    If anyone has some ideas on what might be the solution to this frustration I would be very grateful.
    Oh... and another thing. I've also deleted and re-installed several calendar events that I'd recently entered into my Outlook calendar, just in case therewas something going on there.
    Not to mention the numerous times I've used the Windows troubleshooter to try to figure this things out.
    Sigh... I'm not daft, but this is ridiculously complicated for something that is meant to make life simple.
    Many thanks in advance.
    Máire

  • Error "Licensing for this product has stopped working" when you launch Acrobat 9

    Hi,
    I'm part of service desk and my company has several thousand users of Acrobat. There has been strange issues reported since upgrading from 7.0.5 to 9.1 and a lot of them are uhappy. The latest issue is users started to receive the following error,
    Error "Licensing for this product has stopped working" when you launch Acrobat 9 or Adobe Creative Suite 4 products. The link http://kb2.adobe.com/cps/405/kb405970.html#ErrorCodes has solution, but i tried everything given for 147-178, and nothing works. The users are highly frustrated. Any other possibilities? one collegue claims running simple reg cleaner could solve this issue.

    Wow,
    I went through a "font crisis" on my MacBook about two weeks ago, and I reinstalled Snow Leopard, then restored everything from Time Machine backup. Everything but Office 2008 and CS4 was able to run from the restore, because there were preferences for both that wouldn't copy back to my Library (permissions).
    I reinstalled both from the "original media" (dmg's)  with my Time Machine and 2 other external HDs connected and mounted. I had no problems with either. In fact since I was re-installing from dmg's stored on my Time Machine drive, I had to have it connected to do this. Installing Office and CS4 from the dmg's took all of twenty minutes for both with no errors at all.
    I'm glad you got everything taken care of, but anectdotal evidence tells me CS4 can be reinstalled with external drives connected and mounted.

  • I get a message that itunes has stopped working when I try to sync photos

    I get a message that itunes has stopped working when I try to sync photos. Error message says "APPCRASH ..."
    Can anyone help? Thanks.

    I found the file but when I added it to the  list for the Data  Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?

  • I get an error message "Adobe Reader has stopped working" when i try to use Firefox

    I get an error message "Adobe Reader has stopped working" when i try to use Firefox

    I have also retarted twice...

  • Excel has stopped working when I try to launch Excel 2013 Powerpivot

    Redirected from the Win 7 forum: (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/excel-has-stopped-working-when-i-try-to-launch/01460690-abab-495f-ab5f-904f72f88668)
    My system is a Windows 7 machine, 64 bit
    I previously had Excel 2010 32bit with 32 both Powerpivot installed.  However I am currently evaluating 64 bit Excel 2013 with Powerpivot for my company so I uninstalled Excel 2010 and installed an evaluation copy of Excel 2013 64 bit.
    However whenever I launch Excel, enable Powerpivot, then click any of the Powerpivot buttons it gives me an error saying "Excel has stopped working".
    I took a look in the Windows events logs and found:
    Faulting application name: EXCEL.EXE, version: 15.0.4420.1017, time stamp: 0x506741b5
    Faulting module name: mscorwks.dll, version: 2.0.50727.5477, time stamp: 0x5265c8ee
    Exception code: 0xc0000005
    Fault offset: 0x00000000002ba203
    Faulting process id: 0x3e8c
    Faulting application start time: 0x01cf52a7644eda9d
    Faulting application path: C:\Program Files\Microsoft Office\Office15\EXCEL.EXE
    Faulting module path: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\mscorwks.dll
    Report Id: afa4f824-be9a-11e3-94ac-415645000030
    I have tried uninstalling and re-installing as well as doing a Repair on my .net framework, which is the latest version.

    You can go to check the dll file, what's size of this dll file?
    If the file size is 0 byte, you can check the link below:
    http://forums.steampowered.com/forums/showthread.php?t=2735528
    Also you can go to check the disabled items (File->Options->Add-ins->Disabled items->Go) to see if any dll file was disabled.
    In addition, Isn't the latest version of .NET Framework supposed to be 4.0?(Not quite familiar with this)
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee
    the accuracy of this information.
    Wind Zhang
    TechNet Community Support

  • Error message - Captivate has stopped working - when publishing to MP4

    I get and error message that Captivate has stopped working when I try to publish to an MP4. I am using Captivate 6. How do I solve this problem?

    Hi Shivers,
    What is the Exact version of Captivate you are using (Go to Help > About Adobe Captivate) ?
    Please try to clear the cache of Captivate ( Go to Edit > Prefrences > General Settings)
    See Screenshot
    Please clear cache from computer as well..
       Go to Start>Run>Type %temp% and then click on ok
    Delete all the files from that folder(Some of the files which are in used will not get deleted , Ignore them)
    Then try to Run as Admin and check if this works
    Thanks and Regards
    Himanshu Satija

  • ITunes has stopped working when I click "Get Info"

    Anyone can help me please..?
    My iTunes has *stopped working* when I right click on any song click "*Get Info*". It just stop and crash. I'm on Vista 32bit. Thanks before...

    Well it's working fine again.........................................I don't get it - -

  • Skype has stopped working when i make a call or vi...

    i need help my skype has stopped working when i make a call or video call.. i tried all solution my webcam works fine my mic too help me fast i use skype to study and work and thx :'( email me on [Mod edit: Please do not include personal/private information when making a public post. Thanks!]
    Attachments:
    Untitled.png ‏1174 KB

    Please,  run the DirectX diagnostics tool.
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • Jrew.exe has stopped working when iam trying to install oracle on vista

    hi,
    iam gettin an error stating that jrew.exe has stopped working when iam trying to install oracle 9i on windows vista cam anyone help me in resolving it

    Duplicate post. Please stick to Re: jrew.exe has stopped working when iam tryin to install oracle9i on vista

Maybe you are looking for

  • READ STATEMENT Clarrification

    Hi all, Can we use READ STATEMENT In ABAP to directly Read the DATA BASE TABLE like MARA.

  • Help for order by clause

    Hi , i have a below table with data , when i run my select with order by option its gives me 1     Card as a first row but i need this 12     atm as a first row ,how this is possible . create table test (ID number , val varchar2(20) insert into test

  • C4780 locks up on attempts to setup wirelss

    I have a new iMac running latest OS.  During Setup, the printer -- while connected via usb -- sees my network.  However, upon hitting Continue to get it attached to the network, I receieve a popup box saying "Device Not Connected...connect via USB" I

  • Inserting Pages documents

    Can anyone tell me how to insert, what would seem a very basic question, how to insert one Pages document into another? Thanks, paul

  • Exporting lots of jpg

    Hi there, I have a large project, and I want to export each page to a JPG file. When I export these files, Indesign asks me how to name those, I just enter for example AA0.jpg Then Indesign exports AA0.JPG, page 2, AA01.JPG, page 3 = AA02.JPG and so