Photoshop CS4 quits responding when using 3D

Photoshop CS4 quits responding when selecting new texture in materials section under opacity in 3D. I have not had this happen till just a few weeks ago. It was working just fine. I run an IMac with 2 gig of ram. My graphics card is a ATI,RadeonX1600.

Ok I have tried turning off OpenGL and it seems to be just the Opacity, but it still locks up even if I just raise or lower the opacity level or pick new texture. By the way I called apple tech yesterday and they offered to roll me back to previous update but if anything occurred as a result of it, it would cost me $49.00 per incident. The tech also said that adobe needs to be the one with an update for the problem. Man what a mess. Well that all being said I will just have to use my MacBookPro for my 3D work. I have no problem with Photoshop on it. How do I get Adobe to do an update for the problem.
Message was edited by: Johnny Elzey

Similar Messages

Adobe Photoshop CS4/5 Crashes when using the Move Tool

Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2

Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel

Photoshop CS4 "Program Error" when using Text tool

Hello. I was having problems with Photoshop displaying a "Program Error" every so often, so I deleted the preference file and all seemed good. But after deleting the preference file for my Photoshop CS4 and re-launching Photoshop, the text tool causes Photoshop to display a Program Error when using the tool. It never did this before. Should I reinstall Photoshop? I am using a Powermac G5 running 10.5.8. I have already tried repairing the disk permissions.
Thanks

Thats kinda what I thought too, but the problem started happening randomly. It started when we were trying to use photomerge with large photos. The program just started giving the program errors. I still think it may be a font problem, but without going through my 2000+ fonts and disabling them one by one, how can I resolve this issue?
Thanks

Photoshop CS4 "quit unexpectedly" when opening documents or creating new ones

I recently upgraded my computer to an iMac and reinstalled Adobe CS4. All programs have worked perfectly for months, but now Photoshop will not open. Everytime, whether opening an existing document or creating a new one, it give me the message "Photoshop quit unexpectedly."
I removed ALL 3rd Party Plug-ins (only had a couple) and reinstalled Photoshop - three times... still no luck. I cannot open the program at all.
Adobe Tech Support will no longer support CS4...
HELP! SOMEBODY...

Then, your preferences were not created, maybe.
Can you try using the CS Cleaner tool to clean all traces of Adobe CS4 and install CS4 afresh? - http://www.adobe.com/support/contact/cscleanertool.html
This is different from just doing a re-install. Try it out.
Also, in the error you're getting, is there an error code or a description? IF so, can you post that here?

Hello I have install photoshop CS4 ( 11) but when I try to install last updates it show me am message ( Adobe Photoshop CS4 not installed ) ?! but its installed and I use it see Attach

hello
I have install photoshop CS4 ( 11)
but when I try to install last updates it show me am message ( Adobe Photoshop CS4 not installed ) ?!
but its installed and I use it ><
see Attachment

Please do not use the post title to post the entire question (no offense, it just makes the forum look ugly). As for your question - you really did install it? I mean with serial and install disc? If so, the update would work, because it would find the proper install info. That not being the case, there are a few things that may be wrong:
- due to you language settings, the installer cannot find the folder because it has a different name (though on Vista, that shouldn't be an issue)
- at some point, you used the CS4 Clean Utility/ Script to remove install info
- you are using a pirated copy that you may have bought on eBay or elsewhere that has a modified installer to circumvent licensing
- you are using an unlicensed version a "friend" gave you and that never was installed, but merely copied to the harddrive
That pretty much covers the immediate options, now it's up to you to tell us, which one may apply. Assuming, we are talking about perfectly legit software, re-installing it from the original media should take care of the problem. For illegal software, you should understand, that you are utterly on your own and nobody will help you, much less on the forums of the company producing the software.
Mylenium

Photoshop CS4 shuts down when trying to Print

Good day we installed a new network print driver and now Photoshop CS4 quits when you try to print with the following error
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Date: 4/1/2009
Time: 3:18:08 PM
User: N/A
Computer: AMYS
Description:
Faulting application photoshop.exe, version 11.0.1.0, faulting module ntdll.dll, version 5.1.2600.5512, fault address 0x0001b1fa.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 70 68 6f ure pho
0018: 74 6f 73 68 6f 70 2e 65 toshop.e
0020: 78 65 20 31 31 2e 30 2e xe 11.0.
0028: 31 2e 30 20 69 6e 20 6e 1.0 in n
0030: 74 64 6c 6c 2e 64 6c 6c tdll.dll
0038: 20 35 2e 31 2e 32 36 30 5.1.260
0040: 30 2e 35 35 31 32 20 61 0.5512 a
0048: 74 20 6f 66 66 73 65 74 t offset
0050: 20 30 30 30 31 62 31 66 0001b1f
0058: 61 0d 0a a..
On some systems I can set the defualt printer to another printer and when I print I then select the printer I want to print too, wiht no issues but if the printer in question is the default printer then CS4 just crashes. The Printer is a Ricoh 3260C. The printer is a network printer connected to a print server. Users have Admin rights on the local PC. If anybody has any ideas on this problem I could use some help. I have removed and reinstalled driver a few times with no luck. Even tried going back to old driver as well still no luck. All other adobe products seem to work fine.
Thanks
Adam Raff

Thanks for the help John but the problem is not that simple. One of my users now has no printer loaded when he starts Photoshop. when he starts it it says please install print drivers. I have uninstalled photoshop with no luck. Since this printer is the primay printer for the Art department I need it to print to that printer. I am using a standard PCL5 driver which is from 2008. there are no newer drivers I have also found that if I change the orientation (portrait or landscape) of the print then it will also print fine. If anybody has any ideas please let me know
Thanks
Adam Raff

Photoshop CS6 shuts downs when using the move tool

Photoshop CS6 shuts downs when using the move tool. It seemas to run fine until i try and use the move tool. PS worked fine just a few weeks ago and now it has this issue. What can i do to resole this issue?
Thnaks,
System Specs
Windows XP Home SP3
AMD Atholon 64 X2 Dual
2GB RAM
Video Cards
Radeon 7200
NVIDIA GeForce 8400GS

Two displays are OK on one adapter, Two displays adapters are not OK. http://helpx.adobe.com/photoshop/kb/gpu-opengl-support-photoshop-cs4.html
7. If you are using more than one video adapter, remove the additional cards.
Multiple video adapters can cause problems when OpenGL and Photoshop use the GPU. It's best to connect two (or more) monitors into one video adapter. If you have to use more than one video adapter, make sure that they are the same make and model. Also make sure that they both support the same versions of OpenGL and Shader Model. Otherwise, crashes and other problems can occur in Photoshop.
Note: Using two video adapters does not enhance Photoshop's performance.

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit.

Photoshop cs4 access denied when trying to install from disc in Windows 7 64bit. I tried it in
safe mode and it starts to install but get an error there as well.
What do I do?

So when you put the disk in it won't run correctly? When the disk is inserted you should have a window pop up with 2 options. 1 to install and the other to see what is on the disk. Choose to explore or open the disk. Go to the CS4 folder where the photoshop .exe file is (that will run the setup), right click on the .exe file and choose run as Admin and it should start. See if it will install. If not then read below.
I am not sure how far you got in the install before so chances are you will have to run the CS4 cleanup utility. 2 levels to run at but don't use 1 or 2 just type in the number 3.
http://www.adobe.com/support/contact/cs4clean.html
You may need to run the windows installer cleanup utility too
http://support.microsoft.com/kb/290301
Before you try to reinstall the software ensure that adobe reader is not installed. If it is remove it. It has caused issues in the past with vista and CS4 installs.
Also turn off windows Defender and any anti-virus software. You can keep UAC on in Windows 7.
During the CS4 install at 90 percent it will almost stop and may take 5 to 10 mins to finish. This is normal. What a pain huh......
After install is finished, reboot
After reboot, go to the CS4 64 bit or 32 bit icon (depends on 32 or 64 bit Windows 7) in start area, right click on CS4 64 bit (if you have windows 7 64 bit) and choose properties, compatibility tab and then check run as Admin at the bottom area. Hit apply, ok to close out.
Now start CS4 and run the updater.

Photoshop 12.1 corruption when using gaussian blur

Is there a fix for the Photoshop 12.1 corruption when using gaussian blur

It's not a crash per se... when using the gassian blur filer at some but not all times the file will becomse corrupted.. it comes up with large flat panels of color. After that point asnything done to the file is destroyed. You have to go back to the last saved versioin of the file. There are many notes on the web about this issue.. It has been occuring since I started with 12.1 about a year ago. Never occurred on other PS apps.
You have to quite the app and re-launch. Then it works. There is no crash report to make.

The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

The volume up and down controls on my wireless keyboard show a no entry sign and do not respond when used...please help?

If you want to get a little more "exotic" you can try remapping the function keys. I did a little google searching and the hits that looked promising are,
Mapping volume and eject keys to 3rd-party keyboard Other Hardware
Spark
Spark is a powerful, and easy Shortcuts manager. With Spark you can create Hot Keys to launch applications and documents, execute AppleScript, control iTunes, and more...
You can also export and import your Hot Keys library, or save it in HTML format to print it.
Spark is free, so use it without moderation!

Safari is quitting unexpectedly when using the .WebCalendarPad.so plugin. What do I do?

Here's the message I get:
Safari is quitting unexpectedly when using the .WebCalendarPad.so plugin.
Process:         Safari [1806]
Path:            /Applications/Safari.app/Contents/MacOS/Safari
Identifier:      com.apple.Safari
Version:         5.0.5 (6533.21.1)
Build Info:      WebBrowser-75332101~1
Code Type:       X86-64 (Native)
Parent Process: launchd [102]
PlugIn Path:       /Users/Shared/.WebCalendarPad.so
PlugIn Identifier: .WebCalendarPad.so
PlugIn Version:    ??? (???)
Date/Time:       2012-04-30 20:51:29.328 -0500
OS Version:      Mac OS X 10.6.7 (10J4138)
Report Version: 6

You’ve been infected with the “Flashback” malware. See this Apple support document:
About Flashback malware
Back up all data, if you haven't already done so.
Select  ▹ Software Update to install the latest Java update (if Java is already installed) or the Flashback malware removal tool (if Java is not installed under Lion), as well as any other available updates. Installing either of those items should clear the infection in most cases. You must update to the latest version of Mac OS X 10.6 or 10.7 before you can install the Java update.
The removal tool runs automatically in the background and is then deleted. Don’t look for something to click. If the malware is removed, you’ll be notified.
After you’ve secured your system — not before — change every Internet password you have, starting with banking passwords, and check all financial accounts for unauthorized transactions.

I've received an error message for for photoshop CS4 that I still use for some automated projects. ERROR: 150:30 Anybody know what this is and how to fix it?

I've received an error message for for photoshop CS4 that I still use for some automated projects. ERROR: 150:30 Anybody know what this is and how to fix it?

Please refer:
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac- os.html
Regards,
Ashutosh

Photoshop cs4 not responding why?

photoshop cs4 not responding why?

Please read these and proceed accordingly:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

Receiving an error while trying to installed Photoshop CS4 . error code 6. using windows 7

receiving an error while trying to installed Photoshop CS4 . error code 6. using windows 7

There isn't much here which is actionable. Please review your installation logs by following the steps listed at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

Safari quits unexpectedly when using flashplayer 10.6

safari quits unexpectedly when using flashplayer 10.6

May not be just Flash that's the issue. Post a crash report.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

Photoshop CS4 quits responding when using 3D

Similar Messages

Maybe you are looking for