Photoshop CS4 Trial Will not start. Error message will pop up saying ...
"Some of the application components are missing from the Application directory, Please reinstall the application."
-CS4 Photoshop
-Vista Home Premium
-HP
I've been at this for days, I've uninstalled, reinstalled, clean scripted, everything i could think of. I have no luck with anything! What is strange is that Bridge will still work, but just Photoshop alone won't.
If anyone could help .. in anyway at all, it would be greatly appreciated!
Bridge is not tied to any restrictions in terms of activation or requiring specific components to be in place, hence it almost always works. Do you correctly run the install with administrative privileges?
Mylenium
Similar Messages
-
''locking as a duplicate - https://support.mozilla.com/en-US/questions/834467''
the details are in the questionDo a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
After many months of non-use, when I tried to open Photoshop CS4 Extended, I got an error message 148.3. "Licensing for this product has stopped working." I need help, please.
Error "Licensing has stopped working" | Windows
Error "Licensing has stopped working" | Mac OS
Mylenium -
Can anyone help? I downloaded photoshop elements trial and got a error message to download support advisor
The Adobe Support Advisor has been discontinued
The Adobe Support Advisor tool was used to analyze
installer log and system information associated with installation
errors. The tool has been replaced with improved installation support
mechanisms. Please visit Adobe Support section for Knowledge base
articles around Installation.
Source: Adobe - Adobe Support Advisor
If you tell us which version of PSE you have downloaded and what is your operating system then somebody here might be able to help you.
Good luck. -
This is a long description of a series of problems with my new Palm Pre. You may wish to search the text to find your specific issue(s). There is no solution in my post. Look for possible answers in the responses to come.
I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone worked great. Last night I plugged in the phone and updated the OS. After completion, I selected "Done" and went to bed.
- First Series of Issues: "Phone Offline", will not charge battery -
In upper lefthand corner of the phone there is the message "phone offline". Although the phone has been charging all night it reads "26% battery". I called the general Sprint tech support number and we tried the following things:
1) Restart phone (press and hold power button, then select "turn off". after power down, press and hold power button to power on.)
2) Reset the phone (several different ways - call tech support so that you do this correctly)
The individual at Sprint then sent me to another tech support person, presumably 2nd tier.
- Second Series of Issues: Error message "an error has occured that cannot be resolved" -
Sprint tech support person #2 also had me restart and reset the phone in a number of ways. In her words "we've tried every palm pre trick I know" and each time the phone was unresponsive. Often we received the error message "phone is offline". We did a full erase and after that the phone would no longer restart. At this point the error message came up saying "an error has occured that cannot be resolved" which referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky background with a semitransparent box over it with white text.
Sprint tech support person #2 then connected me with Palm support and the dance continued. Again we tried a whole bunch of resetting and restarting and erasing options. Palm support instructed me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. While that was happening he had me hold the "volume up" button and plug the phone into the charger. This caused a USB symbol to appear on the phone. When the file was complete I received an error message that the file couldn't run. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He then transferred me to another Palm support person who works with Mac users.
Palms tech support person #2 then informed me that I should have selected the "mac" download option on www.palm.com/rom. I verbally walked her through the whole series of webpages, telling her that it says that you need Windows (version whatever) or Mac (version whatever) but that at no time was there an option to download a different WebOS Doctor for different operating systems. After some more discussion she told me she would have to have someone call me back tomorrow.
- Third Series of Issues: phone stuck on USB symbol -
So at the moment the phone is completely useless. Not fantastic. I booted up the mac in Windows 7 and downloaded WebOS Doc and received the same error. I also ran Windows Vista virtually and received the same error. Later this afternoon I'm heading into work to try the same thing on Windows XP.
In the meantime, I got onto this forum and located a thread that provided a direct link to the necessary file:
palm.cdnetworks.net/staging/rom/webosdoctorp100ewwsprint.jar
After downloading that file, which I realized could totally be a virus, I was able to get WebOS Doc working on my computer. It required that I recharge the phone completely before beginning and now it's on the screen that says "Don't disconnect your phone" and the file is at 3% complete. Only... it's been at 3% complete for almost 30 minutes.
I am hoping that Palm will follow up with me tomorrow, but I'm leaving at 7am on a business trip and would love to have the thing working. Any suggestions are welcome, even if you can just tell me how to get the think disconnected safely before my flight tomorrow. I don't fancy getting through security with my phone wired to my laptop.
Thanks.
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.Hello and welcome to the forums;
Our phone support is open every day Monday through Sunday, although there are different hours of operation for the weekend. If after a webOS Doctor reset you are still experiencing the same problems, I would likely recommend replacement, either in a local store for your carrier or through our technical support department.
There may be additional technical support offered or suggested over the phone, this would need to be done first before a replacement could be issued.
Hope this helps,
TreoAide -
Photoshop cs4 trial will not intall with setup exe
can anyone help i have downloaded the trial version of photoshop cs4 and extracted the files to an external hard drive but i cannot intall it on my computer when doulbe clicked on the setup exe file nothing happended it just opened it up and place a file on in the folder called ahmed or something like that can anyone help me with this problem i have plenty of disk space and plenty of ram. i am running windows xp professional and i have administrative privalages.
Bridge is not tied to any restrictions in terms of activation or requiring specific components to be in place, hence it almost always works. Do you correctly run the install with administrative privileges?
Mylenium -
Photoshop cs4 bridge,getting not enough storage message.
I have a computer that the motherboard died a couple of weeks ago. The motherboard and processor have been replaced as well as upgrading the ram from 4 gb to 12. We were able to use the old hard drive with no problems, maybe, just booted it up yesterday and am still working things out. Photoshop cs4 was installed on the computer and it seems to be working fine, except that I'm getting "not enough storage" messages when I try to do things I was able to do before the colapse. One thing I've noticed is that in the 32 bit version of Photoshop preferences it shows around 3 gb of ram available while the 64 bit version shows the full 12gb. Is this typical? and if not why would it be showing up this way? I'm not sure that has anything to do with the problems with bridge it is a stand alone program now. Anyway, does anyone have any idea what could be the problem with this? Would uninstalling and re-installing the programs help?
Windows 7 Home Premium 64 bit system
12 GB RAM
I'm not sure what else would be needed about the computer, let me know if there is anything else.
Thanks for any help,
LindaIs the "not enough storage" error message showing up in Bridge or Photoshop? I ask that because it seems to be a Bridge error message and the Bridge forum could better handle that.
If Photoshop is giving you this message, check your Preferences > Performance and see that the ram allocated is not more than 65-70% of total and look at your scratch disk allocation in that section as well.
I would also consider resetting Photoshop's preferences. Sometimes that clears up problems, and of course be sure you install the latest CS4 updates.
I'm assuming you have to use 32 bit Photoshop CS4 (example32 bit third party plugins). If not use 64 bit CS4 and see if that works.
I'd heed the upgrade advice as well. After December, CS4 to CS6 upgrade price will increase from $200 to $700. -
Can not start - error message not enough storage
This morning - when I push the start button there is an error message - Not enough storage ..... But the close abd settings button will not work. The bottom slider button will not work. I cannot shutdown to restart either
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Firefox does not start. error message comes up saying firefox open.
Fire fox cannot be started as error message comes up saying Fire Fox is open and should be closed. I have shut down and restart computer several time and it still shows Firefox is open and running.I even uninstalled Firefox and re installed it still same problem cannot get Firefox.I need to get access to my book marks. How can I start Firefox and get my book marks? Please help. Thanks
Hello Jignesh.
This issue has been reported before by other users, and it turns out it's the effect of malware. In other words, your system is infected. To scan for malware, install, update and run these programs ''in this order''. They are all free for personal use, but some have limited functionality in their "free mode", but the features you'll miss are not really needed to find and remove the problem you have. Remember that ''not all programs detect the same malware''!
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php malwarebytes.org/mbam.php]
SuperAntispyware - [http://www.superantispyware.com/ superantispyware.com]
AdAware - [http://www.lavasoftusa.com/software/adaware/ lavasoftusa.com/software/adaware]
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html safer-networking.org/en/index.html]
Windows Defender - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx microsoft.com/windows/products/winfamily/defender/default.mspx]
Dr. Web Cureit - [http://www.freedrweb.com/cureit/ freedrweb.com/cureit]
If these don't find it or can't clear it, please tell me and I'll provide you with further assistance. -
my ipad 4 stopped working, it will not switch on, charge nor will it allow me to restore, the errror message 1601 comes up when trying to restore does anyone know how to help as i am not near an apple store to get help
You have already seen this for Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
For a new machine Error 11 !
Check Hosts file if it is diverting iTunes away from Apple servers. -
can anyone help me? I've been trying ti change it since last night.
Help is right here, front and center caibadass. May I ask what's the reason for the mobile number change? Are you logged into My Verizon as the account owner to make such a change? If you can share the details then we can assist. Keep in mind that if the number is changed online then there is not a cost.
Thank you...
ArnettH_VZW
Follow us on Twitter @VZWSupport -
I have an iMac Mid 2011 model intel i5 with AMD Redeon HD6750M 512 MB graphic card, 8 MB RAM.
I was using the imovie the other day and down loaded some of the vedio clips from Sony camcorder.
All of a sudden today while I was trying to open the iMovie it did not a window poped up saying that
iMovie requires requires a graphic card that is compatible with Quartz Extreme................
What is these nonsence thing happening ........
Can any body provide some clue how to resolve the issue
Thanks and regards in advance
BijanIf it was previously working then try a smc and pram reset.
If that doesn't fix it then see if vlc can handle the video. -
CS4 and Yosemite: Version Cue error message when opening photo
I recently installed Yosemite and now my Photoshop CS4 gives me the following error message when I try and open a photo, WHY? and how can I fix it?
/Library/Application Support/Adobe/Adobe Version Cue CS4/Client/4.0.0/VersionCue.frameworkAnswer is in this post:
http://discussions.apple.com/thread.jspa?messageID=13205746#13205746
Just delete the corrupted movie. -
My photoshop will not load, error message 148.3
my photoshop will not load, error message is 148.3
This is a licensing error. The usual fix is to reinstall the program after running the Creative Suite Cleaner Tool. also read this:
Error "Licensing has stopped working" | Windows
Error "Licensing has stopped working" | Mac OS
If you can't fix it, you will have to provide more info like system specs and what version of PS you actually use...
Mylenium -
photoshop elements 10 won't start. Message is. 'Runtime error. Application has requested the runtime to terminate in an unusual way. Please contact support team for more information' 'microsoft Visual C Runtime Library. How do I fix this or can I just uninstal and then re-instal (without losing my spare licence that I want to use elsewhere) It is a PC not a Mac
See if anything here helps:
Troubleshoot C++ runtime errors | Adobe products | Windows
Maybe you are looking for
-
I have a mac book which has my itunes account on it. My partner's PC has crashed and I want to get his itunes account on my mac book so that he can sync his phone. Can someone help me with how I do this please? Many thanks
-
MultiLine fields not overflowing correctly on PDF
Hi all. I have an issue where the sections that i'm appending into a multiple multiline field section overlay each other. So imagine three sections. One small .5" dummy section to start. One large 10" section with three multiline fields in it. There'
-
Cell Text Annotations of Hyperion Planning on Hyperion Financial Reporting
Hello, There is a business requirement to show Cell text entered as annotation on each cells in data form to be reported using Hyperion Financial Reporting. Also there is a case of some of the data types being text. Some of the forms also have suppor
-
Im sure a very simple question, how can i make Labview simply count the number of rows in a 2D Array and produce that number of graphs. ie. 25 rows, 25 graphs appear on front panel which can then be worked on and set up appropriately. Thanks
-
Repeating values suppressed in tableview
Hi, when I have repeating values in a tableview they are automatically suppressed. How can I turn this feature off? Do I need to include an iterator? This is just a straightforward display only tableview that must display all the contents of the t