Photoshop CS4 - When I pullled up a file, JPEG logo someone sent to me, the screen has cross thin green lines over it. What is that? How do I remove it?

Photoshop CS4 - When I pullled up a file, JPEG logo someone sent to me, the screen has cross thin green lines over it. What is that? How do I remove it?

JPEG files are not layered files they are just image files so the green lines are a part of that file.
Usually cross lines are added to prevent anyone from using the file without proper rights, its a way of safeguarding the artwork.
You have to ask the owner of the file to remove the lines for you.
hope this helps
thanks

Similar Messages

  • I have an error when syncing No 3194 and this stop sync  my phone not working .the screen say connect to itunes   all stafe updated   what can i do ?    please help

    i have error when i connect to itunes

    C Mawle wrote:
    Thanks.  I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
    Yes it would, possibly even brick it.
    Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
    Can I use my ipod nano USB connector to check?
    It is not much help to you, since the device that you need still not recognized.
    Anyway looks like I may have to swallow the loss of data.  Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
    Good luck, but if you expect miracle from that call good luck again.

  • When I start it up it shows two two nested windows on the screen, has a Firefox yellow tab in the corner, does not display the toolbar bookmarks, the back and forth buttons do not work and there is no page refresh. No clue what is going on.

    Every time I open up Firefox it appears to open two nested and linked windows, each with their own minimize, maximize and close buttons but the both work the same. The homepage does not come up, the back and forth buttons do not work. Both the refresh button and F5 do not work. The Bookmark Toolbar does not show up until I disable it in View and then re-enable it and this causes the outer nested window to disappear or close.

    This issue can be caused by an extension or theme that isn't working properly.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • I migrated photoshop CS4 onto my new mac laptop. Error message on startup: Licensing for this product has stopped working. Error: 150:30

    I migrated photoshop CS4 onto my new mac laptop. Error message on startup: Licensing for this product has stopped working. Error: 150:30 What do I do?

    Uninstall and run the Cleaner Tool
    Uninstall Creative Suite 4 and point products (Mac OS X)
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • When i send a PDF file to out side print, some of the things I aded dose not print. Is there a way I can "close" the PDF when i finish the work- so' every thing will be printed for sure

    when i send a PDF file to out side print, some of the things I aded dose not print.
    Is there a way I can "close" the PDF when i finish the work- so' every thing will be printed for sure

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

  • How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

    How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

    First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
    You can find it here:
    [Ann] Identify Your InDesign File
    If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
    In regards of the script showing a result for InDesign files higher than CS6:
    CS7 = CC v9
    CS8 = CC v10 = CC-2014 or CC2014.1
    Uwe

  • I have Windows 7, with Office 10, Acrobat Adobe 9 Std. I used to be able to combine pdf files into one pdf until I converted to Office 10. Now when I combine 3 pdf files into one pdf, I am missing the middle pdf. Pages are there but the pages are blank. A

    I have Windows 7, with Office 10, Acrobat Adobe 9 Std. I used to be able to combine pdf files into one pdf until I converted to Office 10. Now when I combine 3 pdf files into one pdf, I am missing the middle pdf. Pages are there but the pages are blank. Any Idea???

    [discussion moved to Creating, Editing & Exporting PDFs forum]

  • Before this last upgrade, when I would create a file and do a "Save As" it would always open "My Documents" by default, which is what I prefer. But since the upgrade it opens in some annonomus file, to which I have to go through several steps to get to My

    Before this last upgrade, when I would create a file and do a "Save As" it would always open "My Documents" by default, which is what I prefer. But since the upgrade it opens in some anonymous file, to which I have to go through several steps to get to My Documents, and I can't seem to select the default in my preferences. HELP PLEASE!!!

    Before this update of what software from what version to what version using which OS?

  • Just updated my mac from Tiger to Mountain Lion. Loaded Photoshop elements 11 (brand new in the box) and when I try to start it - it comes up saying - Licensing for the product has stopped working contact for help.

    I just updated my mac from Tiger to Mountain Lion.  wiped the computer clean and started fresh Loaded Photoshop elements 11 (brand new in the box) and when I try to start it - it comes up saying - Licensing for the product has stopped working contact for help. in Looking for help I was directed here. what do I do?

    I don't know enough to not follow directions. I bought the software brand new in a sealed from factory box. Had it sitting around until - last week when I deleted flash on my computer and had to upgrade to the new OSX. Mountain Lion doesn't use iPhoto - so I had to go with something else. Since I already had this new - unopened package  I opened it up. Shut down all running programs - inserted the disk and followed all the directions for installation.  Still it didn't work.
    I have now uninstalled it (the proper way) and am going to try again.
    I appreciate your responses.
    Thank you!
    If this doesn't work - I am going to just buy Lightroom.

  • When I export my number file in Excel, I can not open the spreadsheet : Invalid Reference, what's wrong ?

    When I export my number file in Excel, I can not open the spreadsheet : Invalid Reference, what's wrong ?

    "Invalid reference" usually means there is a cell reference in a formula to a cell that does not exist in the document.
    In this case, it could mean that your Numbers document uses a feature that is not supported by MS Excel, and because of that, the document cannot be translated into an Excel file.
    A more specific answer would require a more detailed description of your Numbers document.
    Regards,
    Barry

  • When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    When I open a pdf file, after a few seconds, it hides the toolbar and I don't know how to get it back.  I use multiple monitors and, without being able to grab the toolbar, I am unable to move the pdf file to a different monitor.  How do I stop this?

    Does Firefox switch to full screen if you press F11 ?
    You can also try the F10 key to see if that brings up the menu bar.
    * If the above steps didn't help then see http://kb.mozillazine.org/Corrupt_localstore.rdf
    Note: Do not delete localstore.rdf in the program folder (Windows: "C:\Program Files\Mozilla Firefox\defaults\profile\") (Mac: "/Applications/Firefox.app/defaults/profile/")

  • WHEN will you support raw files for Canon 70D in PE? This camera has been out for months!

    WHEN will you support raw files for Canon 70D in PE? This camera has been out for months!

    Hi,
    PSE 12 with updates or PSE 13 should support the Canon 70D.
    Which version do you have and which operating system are you running on?
    If you have an older version of PSE, you could use the DNG converter to convert the CR2 files to DNG files - then you can use the DNG files in PSE.
    Brian

  • When I go to a website, it half-way downloads and then the screen freezes for 10-20 seconds while ads appear; this never happened till recently.

    Until recently, I loved Firefox. Lately, when I go to any website and try to download a page, the screen freezes for between 10-20 seconds while ads load. Why the screen freezes is both frustrating and annoying. I have the latest version, nothing on my computer is different, and as I said, it didn't used to do this. Any ideas what's going on?

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    * https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See:
    * http://kb.mozillazine.org/Firefox_crashes
    * https://support.mozilla.com/kb/Firefox+crashes
    * https://support.mozilla.com/en-US/kb/latest-firefox-issues
    If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). You can find the IDs of the submitted crash reports on the about:crashes page. You can open the about:crashes page via the location bar, like you open a website.
    See:
    * http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
    * https://support.mozilla.com/kb/Mozilla+Crash+Reporter
    * https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report

  • I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the MacBook, and now I am always seeing it. How to remove it?

    I purchased Macbook Pro i5 in March 2011. Now the screen has problem; one vertical blue line is in the screen (at the right side). I noticed this last week when I opened the macbook and now I am always seening it. I am seeing the blue vertical line always in the screen. However, I am not seeing this line when I open Word, Excel, PowerPoint files (without pictures). But I am seeing this line always when I see movies, pictures, and all the files which have pictures. Please do let me know how can I remove this vertical blue line (blue tint) pernamentally from the screen.
    Regards,
    Ujjal

    Backup your files to a external hard drive and disconnect.
    Call Apple and make a warranty call, then take it to the nearest Apple Store etc.
    You can run these things and it might clear your issue or give further informaiton
    Perform a hardware check
    http://support.apple.com/kb/ht1509
    Then see if resetting the SMC/PRAM resolve your issue
    http://support.apple.com/kb/HT3964
    https://support.apple.com/kb/HT1379

  • File open/download dialog box flashes on the screen, then disappears.

    I am upgrading to Firefox 17 (from 3.5.2) on Linux SuSE SLED 10. I am only moving to Firefox 17, as SLED 10 does not support anything higher than that and it is not feasible to upgrade my entire my OS.
    My issue is that when clicking on a file on a website, the file dialog box (open with/save) flashes on the screen for a split second then disappears. For items that I have handled by specific applications in mimeTypes.rdf, it does the specified action. However, any file type that I have designated in mimeTypes as "alwaysAsk", I get this issue. I do not have this issue in FF 3.5.2 and I have gone as far as using my 3.5.2 mimeTypes.rdf and prefs.js files on my 17 install and it does not help.
    I have looked through many forums and have not been able to determine how to fix this or whether it is fixable in 17.
    Any help would be greatly appreciated.

    # In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
    # Click '''I'll be careful, I promise!''', to continue to the about:config page. A list of settings should appear
    # Filter the list by typing in the search bar at the top. Type in ''scanWhenDone''. '''You should now find the "browser.download.scanWhenDone" preference'''.
    #Double-click on that preference to set the value to ''false''.
    #Next, try to download something and see if it still hangs.
    Please reply and tell us whether this helped you!
    If it doesn't work, reenable the pref that was disabled.

Maybe you are looking for

  • Logoff button is not working for end user application

    Hi Team , Enterprise Portal : SAP Netweaver 7.0 We have updated Support pack from SP11 to SP21. and in End user application log-off tab is not working. ALthough when we login through Administrator user it is working  fine Regards, Kamal

  • Dynamic Structures

    Hi All, As the below code is works only for the condition table 306 as  I created my header structure based on the following fields header, vkorg, vtweg, pltyp, waerk .Bu t I want my header structure  to be  dynamic so that it should work for all the

  • Cannot find catalina.sh

    Hello I Hav install tomcat 5.25 on linux in order /usr/tomcat in proile.local JAVA_HOME = /usr/java/myjdk TOMCAT_HOME=/usr/tomcat CATALINA_HOME=/usr/tomcat/ PATH=/usr/java/myjdk/bin$PATH CLASSPATH=.:$JAVA_HOME/lib/tools.jar:$JAVA_HOME/lib/rt.jar:$TOM

  • Guidance for FICO certification

    I have a B.Com graduate and I have limited training on SAP FI and CO modules at US. I do not have relavant work experience in using SAP. Can anyone provide me guidance on preparation for SAP cerfication. Which certification should I take? How many mo

  • Regarding post installation

    Hi, could you all please help me in knowing the jobs that are to be scheduled after installation of an ECC server. I want to know the common jobs that are scheduled after the installation. The jobs may also include background jobs. I hope some of the