Photoshop CS5.1 won't read raw files from Canon EOS M

Photoshop cs5.1 won't read raw files from canon eosM, what to do?

The EOS M requires at least Camera Raw 7.2 but Raw 7.2 is only compatible with CS6 or higher (CS5 is only compatible up to Raw 6.7)
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
To open and edit Raw files, either upgrade to CS6 or join the Cloud and get the CC version.
Alternatively convert the Raw files from the EOS M to DNGs using the free DNG converter then edit the DNGs in CS5.1
http://www.adobe.com/products/photoshop/extend.displayTab2.html
See also the Camera Raw FAQ
http://forums.adobe.com/thread/311515?tstart=0

Similar Messages

Reading RAW files from Canon EOS 550D

I take pictures in RAW and process them with Elements 8. I had no problems when using a Canon EOS 1000D but now that I am using a 550D Elements is not reading the files. It is not just that it will not open them - it does not even read them as files.
I know that the camera is capturing good files, and that they are transfering to the computer because I can read them with the Canon utility Digital Photo Professional.
What do I need to do in order to get Elements to recognise my files?

I purchased PSE8 and installed it then ran the download 5.7 and discovered it still does not work by putting the Camera Raw.8bi file into the Photoshop Elements 8.0 Plug ins file as detailed on Adobe's instructions. It still would not import the raw files. I then discovered another method through another helpful thread to place it as follows:
C:\Program Files\Common Files\Adobe\Plug-Ins\Elements 8\File Formats\Camera Raw.8bi
This works! The only downside is that when you open the editor from the organiser you get a bad command box saying that it does not like the Camera Raw.8bi file in this location, but if you ignore this message it still proceeds to open the editor and you can proceed as normal. I have tried to put the Camera Raw.8bi into the other Plug-In files to see if it behaves better without any luck, so if anyone has any further ideas to stop this bad command box then everything will be as it is meant to be!
To be honest this update has been available for months so its also up to Adobe to pull their finger out and get it corrected because they are still giving the same instructions for newer updates as well.
I hope this helps somebody !!
Shaun.

Photoshop CS5 will not open raw files from Nikon D810. What do I need?

Photoshop CS5 (bought in 2011) will not open raw files from Nikon D810 (bought in 2014). Is there a patch? Is there something I can do?

YAY!!! Success. Thanks Jim. I have the raw file for this image. ABC OPEN: Dancing water spouts in severe weather I'm such a noob, I hadn't even set up the correct date on the camera.
ABC OPEN: Dancing water spouts in severe weatherFran McFadzen captures a once in a lifetime photo of two dancing water spouts near Rockhampton.
View on open.abc.net.au
Preview by Yahoo
From: JimHess <[email protected]>
To: Fran McFadzen <[email protected]>
Sent: Monday, 26 January 2015, 10:20
Subject: Photoshop CS5 will not open raw files from Nikon D810. What do I need?
Photoshop CS5 will not open raw files from Nikon D810. What do I need?
created by JimHess in Adobe Camera Raw - View the full discussionThank camera requires Camera Raw 8.6 which isn't compatible with Photoshop CS5. But you can download DNG converter 8.6 or newer and create digital negative (DNG) copies that will be compatible with Photoshop CS5. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7130665#7130665 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7130665#7130665 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Camera Raw by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Am useing a PC. Have Photoshop CS5, suddenly cannot move Raw files from bridge (or anywhere else) into photoshop. Jpeg move into photoshop ok, did get error message 1 what do I do to correct this om bridge (or anywhere else for that matter)

Useing a PC
Have Photoshop CS5
Suddenly cannot move Raw Files from Bridge (or anywhere else) into photoshop.
I Can move Jpegs into ps the only issue is with Raw files
I did get error1 message but as do not know what that means its no help
any suggestions?

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Can Photoshop Elements version 13 handle raw files from Canon camera 7D mark 2? Where can I read about it on Adobe web site?

Can Photoshop Elements version 13 handle raw files from Canon camera 7D mark 2?
Where can I read about it on Adobe web site?
I found an Adobe web site note that raw plug-in version 8.7 will support Canon 7D mark 2, but is not included in Elements version 11.

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.

I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.

You could try using the DNG converter 8.7 on Windows vista:
<Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7>
<Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7>
You then need to watch this video to get hang of it:
<Camera Raw: How to use Adobe DNG Converter - YouTube>
Hope this helps.

Lightroom v2 won't read RAW files from Sony A77

Hi there - just got a new Sony A77 but Lightroom v2 won't read RAW files when I try to import them. I know I need to upgrade my version of LR (I will be going to v4) but... is there ANYTHING else I need to do or to upgrade in order to ensure Lightroom 4 will read those Sony RAW files? Thanks!

I don't keep track of what cameras are supported in what versions. But, IF your camera is supported by the latest DNG converter, you could use it to create digital negative copies of your images. Those DNG files can then be opened in the version that you have now. You won't get anywhere near the development quality that you will get with Lightroom 4, but at least you can work on your images with what you have now.
And if Lightroom 4 supports your camera, that is the only thing you can do to "ensure" that you can use your files. Of course, if you modify them now with the version that you have, you can leave them with those adjustments when you upgrade to Lightroom 4, but if you want to use the new adjustments and the improved develop tools you'll probably have to basically start over on any images that you want to convert to the new PV 2012.

Can Aperture 3 read Raw files from Canon G1X?

Is Aperture 3 capable of reading Raw files from a Canon G1X?
I'm currently using an elderly version of IPhoto, having resisted upgrading because of negative feedback about the latest version. My IPhoto version cannot read the Raw files from the G1X. I also tried importing one into Picassa, but the colours looked completely wierd.
I'm now considering buying Aperture 3 but will maybe wait until:
a. Aperture 4 is released and;
b. I know that Aperture can indeed read the Raw files from the G1X.
Any help/advice gratefully received.
Frank P

see this list:
Aperture 3: Wide raw support for leading cameras:
http://www.apple.com/aperture/specs/raw.html
Your camera is supported by Aperture 3.
P.S. and the camera is supported by MacOS X 10.7.4.,
see: OS X Lion: Supported digital camera RAW formats
http://support.apple.com/kb/HT4757
What is your MacOS version? Perhaps upgrading to 10.7.4 should make the raw support available in iPhoto too.
Regards
Léonie

Photoshop CS5.1 Stopped opening RAW Files from Rebel T4i.

I have Photoshop CS5.1 and it has stopped opening my RAW files from my Rebel T4i. It was working the other day just fine. I have tried to download the plugins that othes said will make it wotk; but nothing has worked so far. Also, it said that all my updates are up-to-date. Can someone help me figure out what plugin I need for make this work again?
Thanks, Julie

Camera Raw plug-in | Supported cameras
On that list it says that it requires ACR 7.1 with CS6/ LR4.1 respectively, so whatever allowed you to open those files was possibly a trial version of these products that allowed the components to work. Short of buying one of the two it will never work natively in CS5.
Mylenium

Bridge CS4 won't open RAW files from Canon 70D

I have Photoshop/Bridge CS4 which used to read CR2 Raw files fine from old Canon 30D@. I've just purchased a Canon 70D. Bridge CS4 will read the MOV video files fine, but not the Raw CR2. I've downloaded and installed Adobe DNG Converter 8.5, but when I open it and it asks to open files to convert, the CR2 files are still unreadable and greyed out. I'm on a Mac OSX 10.9.4. Is there some way I could preview RAW files from the 70D in Bridge CS4, and open in Camera Raw?

You need to upgrade to PSE12. Alternatively, download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software) You could also use the Canon software that came with your camera to convert to tiff, which would open in PSE11.
Windows download (.exe file) click here DNG Converter 8.2
Mac download (.dmg file) click here DNG Converter 8.2
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Reading raw files from Canon 70D

I have Photoshop Elements 11 and just got a Canon 70D. How can I get the program to read the raw files?

Jo_vdh wrote:
if I understand correctly, the only way to open the CR2 files from canon 70D is upgrade to PSE12.
No. Adobe offer the free DNG converter that will convert those CR2 files to Adobe's DNG RAW format that can be opened in PSE11, or pretty much any version of PSE going back five or more years.
Jo_vdh wrote:
it's already kind of worthless.
The Organizer and the Editor still do everything they did when you bought the product and Adobe provide a continuing solution to enable RAW processing in older versions of the software so I don't see how it has suddenly become worthless?
And noting that you bought it the month after PSE12 was released I hope you got it heavily discounted.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Photoshop CS4 will not read Raw files from Nikon D60. [was: No automatic updates for my PS CS 4 on windows (for reading .Nef files)?]

Hi
I have been using PS CS4 for several years.
Yesterday, I went to PS CS4 help and selected "updates", but I get the message "There are not updates available at this time; Please note that some updates for the following products cannot be determined at this time: Adobe Updater".
I need the updates because I just purchased a Nikon D60 and my Photoshop does not read the .NEF files produced by the camera.
any idea, please?
thanks

I need the updates because I just purchased a Nikon D60 and my Photoshop does not read the .NEF files produced by the camera.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Do you really mean the Nikon D60 which shipped in 2008? Was it purchased secondhand?
The Nikon D60 was first supported in Adobe Camera Raw 4.4.
Photoshop CS4 ships with Camera Raw 5.0 so it can read D60 NEF files out of the box. No updates required.
If you do mean the D60 then something else must be going on. e.g. are you using Nikon software to transfer files from camera to computer?

Photoshop CC: unable to open Raw files from Canon T1i

I am trying to edit photos in the raw CR2 format I took with my Canon T1i. I cannot get the new Photoshop CC to open them. I think I need a plug in to do this but cannot find out where to download the plug in. Please send a link to the plug in 5.4 for windows and how to download it so i can finish editing the photos I have. Thanks!

The Canon T1i has been supported by Photoshop since Photoshop CS4 (via an upgrade to ACR 5.4).
The Adobe Camera Raw plugin has been able to read T1i Raw files out-of-the-box in Photoshop since CS5.
Something else must be happening.
raw CR2 format I took with my Canon T1i. I cannot get the new Photoshop CC to open them.
What happens when you try? Any error messages?

Reading .CS2 files from Canon EOS 40D to Photoshop.CS Ver. 8.0

I have take pictures of a painting with a Canon EOS 40D for future printing onto canvas for resale.
I have Photoshop.CS version 8.0 which is not able to read the .cs2 files ("Could not complete your request because it is not the right kind of document")
I downloaded Camera_RAW_3.7.zip (Camera Raw.8bi - Jan. 30,2007) from Adobe and put it in the c:\Program Files\Adobe\Photoshop CS\Plug-Ins\File Formats directory
I tried accessing the .cs2 files with the same results. (Note: there was also an old Camera Raw.8BI (Oct. 13,2003) file in the c:\Program Files\Adobe\Photoshop CS\Plug-Ins\File Formats directory which I removed to another directory)
I then downloaded, installed an Adobe DNG Converer 9.0 and converted the images files from .cs2 to .dns.
I tried accessing the .dns files with Photoshop.CS version 8 with no success: ("Could not complete your request because this version of Photoshop does not supply the services required by this plug-in module")
Any other ideas?
We need to prepare this image soon with Photoshop.CS to have it printed on canvas for sale to a customer.
Thanks

First of all, photoshop cs can only use up to camera raw 2.4, so you need to remove all the other camera raw 8bi plugins and install the camera raw 2.4 plugin for photoshop cs.
(you can only have one Camera Raw.8bi plugin in the photoshop plugins folder or photoshop doesn't know which one to use)
Adobe - Photoshop : For Windows : Camera Raw 2.4 update
The Camera Raw.8bi should go in
C:\Program Files (x86)\Adobe\Photoshop CS\Plug-Ins\File Formats (64 bit windows system)
or
C:\Program Files\Adobe\Photoshop CS\Plug-Ins\File Formats (32 bit windows system)
Then you can use the dngs you converted using adobe dng converter 9.0 in photoshop cs.
It's possible you may have to set the compatibility in the dng converter Preferences to Camera Raw 2.4 and later when converting the canon 40d files to dng in order for photoshop cs to read them.
Sample canon 40d file downloaded and then converted to dng used in below screenshot came from here:
http://www.rawsamples.ch/index.php/en/canon

Lightroom 2 Can't Read RAW Files from Canon 6D

I bought a new Canon 6D in December. I am currently editing in Lightroom 2. However, Lightroom 2 does not seem to be capable of reading my RAW files. I guess I need to upgrade to the latest version of Lightroom? If so, will the new version incorporate my existing images from Lightroom 2?

For the record, the Canon 6D was first supported in Lightroom 4.3 (and later versions but not earlier ones).
Camera Raw plug-in | Supported cameras
Adobe only sells current versions of Lightroom (currently 5.7).
You can either pay a once off US$79 upgrade fee to upgrade from v.2 to v.5.7. See Products
Or subscribe to the Photography Plan ($10/month) and get all future updates and upgrades included in your membership
Creative Cloud Photography plan | Adobe Creative Cloud
Or use the free Adobe DNG converter, convert all 6D Raw files to DNG format then edit in LR2
Photoshop Help | Digital Negative (DNG)

Photoshop CS5.1 won't read raw files from Canon EOS M

Similar Messages

Maybe you are looking for