Photoshop CS5 and Photosmart 5524

Hi everyone. I'm looking for  some pointers or guidence please...
I am an amature photographer running Photoshop CS5 on a Windows 7 PC. I have managed to cheaply calibrate one of my monitors and now I would very much like to match up my HP5524 printer with my output on CS5.
I have been going in circles trying to work out how to do it relating to ICC profiles and stuff but I've become overwhelmed with the sheer volume of data and conflicting information. Could someone point me to a useful tutoral or provide me with instructions or even just tell me if it is possible with this printer please?
I don't print loads, but when I do I would like to get the best from my set up.
I've become quite distressed and confused with the whole situation; I apologise if I appear to be an iditot!!
thanks

Hi,
Check out the thread below which has some guidance on IIC profiles:
http://h30434.www3.hp.com/t5/Other-Printing-Questions/ICC-profiles-needed/td-p/90331 
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • I have Photoshop CS5 and am trying to download the Camera Raw plug in which will enable me to look at RAW images from a Nikon D800 . The download appears in my " Downloads " folder but when I try to open a RAW image I get a message up which says it can't

    I have Photoshop CS5 and am trying to download the Camera Raw Plug in that will allow me to open images taken with a D800 camera .
    It appears the download has been successful when I look in my " Downloads " Folder but I still get a message up saying the installed version of Camera RAW won't support the Camera model ( i.e. D800 ) . What am I missing ??
    Tony Fletcher

    You need to download and install Camera Raw 6.7.1 for CS5. Once you have downloaded it, you need to install it while CS5 is closed.
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
    Once downloaded, unzip/unpack the file, and run the executable to start the update, following the instructions.

  • I have Photoshop CS5, and use windows XP.  I cannot open Bridge from photoshop, whichI have done for years. When I am in Photoshop,when it opens, I always click on the bridge icon at the bottom of the screen, and it puts me into bridge. This is not happen

    I have Photoshop CS5, and use windows XP. I cannot open bridge from photoshop, which I have done for years.  When I am in Photoshop, when it opens, I always click on the bridge icon at the bottom of the screen and it puts me into bridge. This is not happening, the small wheel at the bottom of the screen just keeps spinning. Its like its stuck or caught in a loop. I can't get into bridge. I tried shutting down and starting up again but  the problem remains. Looking for help.  Dan

    Thanks for your response, I was able to open bridge from File-Browse in Bridge.  This worked, but was not able to go back to the way I always opened Bridge.  At least I could get to Bridge and go into Camera Raw. I never tried to open Bridge from the Start menu.  The odd thing about this is, it has happened before, and to get it "unstuck" and working again, I would shut down and restart again in a few minutes, and things would go back to normal.  This time it did not go back to normal after several attempts.  I shut down for about 3-4 hours, restarted, and it seems to be back to normal again. I am not sure if it's a problem that is getting worse each time it happens.       And yes I am using Mini Bridge in photoshop CS5.  Thank you for your help.  Dan

  • I'm using Photoshop CS5 and there is no PNG listed under format in save as.

    I'm using Photoshop CS5 and there is no PNG listed under format in save as.    

    PNG files can only be RGB - they are intended for screen viewing. If your intention is to produce a CMYK file for printing, you must use a different format, like tiff.

  • My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images

    Any ideas?

    My student has been using Lightroom 4 with Photoshop CS5 on her Mac for well over a year. Because of the difference between the Camera raw version available to her in Photoshop CS5 and the raw process in Lightroom 4, she has been exporting her raw images from Lightroom and choosing the "Render using Lightroom option when it popped up in the dialogue box. She has been doing this for over a year and a half without any problem. Today when she hit Command E no dialogue box appeared and the image just opened in Photoshop. I'm concerned that all of her Lightroom edits are not being rendered to Photoshop. Anyone have an idea as to how we can get the "Render using Lightroom" dialogue back?

  • I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed

    I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed them in the past.  How can I get it to display these photos in Bridge and open them in RAW?

    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
    Benjamin

  • I have Photoshop CS5 and my image processor and batch tool are gone. How do I get them back?

    I have Photoshop CS5 and my image processor and batch tool are gone. How do I get them back?
    I went into edit preference and all the start up scrips are selected so what else is there?

    When you installed CS5, you have a chance to register it. If you do, your serial number is on file under your Adobe (My Products). If you did not, you have no serial number on file and even worse, no proof you own it.
    You do not have your serial number copied down anywhere? Hard to believe you tossed the dvd box and all the documents away.
    So Help > Register might give you a chance to do this without you knowing the number.
    If not, you may want to consider the Photography Plan. Creative Cloud Photography plan | Adobe Creative Cloud

  • I have Photoshop CS5 and a Nikon D 810 camera.  I have downloaded Camera Raw 8.8 & DNG converter.  I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong?

    I have Photoshop CS5 and a Nikon D 810 camera.  I have downloaded Camera Raw 8.8 & DNG converter.  I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong?  Thanks!

    This is the last paragraph from my very first response to you, post #1 in this thread:
    …Additionally, you need to install the DNG Converter, not just "download" it, and you need to launch it and run it on each folder of NEFs you wish to convert to raw DNGs.  [emphasis added]

  • Adobe Photoshop CS5 and Epson wf 35-20 version 9.04. Photoshop quits. OS 10.9.3.

    Running Adobe Photoshop CS5 and when I try and print using Epson wf 35-20 version 9.04, Photoshop quits.  Have OS 10.9.3.  Any advice sincerely appreciated....

    Hi Chris thanks for emailing. I originally emailed Epson about this issue and they said it is something you should contact Adobe about!
    When I hit print, the colour wheel turns and then the application quits.   then get the following:
    Problem Report for Photoshop
    Click Reopen to open the application again.  This report will be sent to Apple automatically
    I open the comments tab and it says in faded grey:  Provide any steps necessary to reproduce the problem.
    The details say the following:
    Process:         Adobe Photoshop CS5
    Path:            /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5
    Identifier:      com.adobe.Photoshop
    Version:         12.0 (12.0x20100407.r.1103] [12.0)
    Code Type:       X86-64 (Native)
    Parent Process:  launchd
    Responsible:     Adobe Photoshop CS5
    User ID:         501

  • Cannot open camera RAW images from Sony DSC-RX100M3 camera.  Working on a Mac in Photoshop CS5 and have camera raw 6.7.

    Cannot open camera RAW images from Sony DSC-RX100M3 camera.  Working on a Mac with Photoshop CS5 and Camera Raw 6.7?

    Bruce,
    When I made the transition to digital some 8 years ago, I had tremendous help from a number of well documented websites, among which:
    http://www.luminous-landscape.com
    I think a lot of stuff there to get you seriously going. Another one is:
    http://www.computer-darkroom.com
    I sold all my film based stuff, except a Nikon F3 and a handful of lenses and a Paterson developing tank.
    The Nikon suspiciously smells like foam mirror damping strips chemically decaying.
    I sold my enlarger over the internet. The word "enlarger" caused me to be on SpamCops blacklist for a while.
    I'm in this since the seventies, and I think you'll be as amazed as I was at the possibilities and control you have. And no more bags with $300 worth of film that's consumed in one shoot.
    Jump in both feet! you won't be sorry. And these forums are the best help you can get.
    Good luck,
    Rob

  • Raw images in Photoshop CS5 and download of 7.3 plug-in

    I am unable to open my Raw images from a Nikon D600 using CS 5. Also unable to download the 7.3 raw plug-in. Help wou;l be greatly appreciated. Thanks

    Thanks, i will upgrade to CS6, make life easier!
    Date: Wed, 5 Dec 2012 11:33:29 -0700
    From: [email protected]
    To: [email protected]
    Subject: Raw images in Photoshop CS5 and download of 7.3 plug-in
        Re: Raw images in Photoshop CS5 and download of 7.3 plug-in
        created by John Waller in Downloading, Installing, Setting Up - View the full discussion
    Camera Raw 7+ is only compatible with Photoshop CS6+ CS5's compatibility stopped with Raw 6.7 http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applic ations.html If you don't upgrade Photoshop, your next best option is to convert your D600 Raw files to DNG and work on the DNGshttp://www.adobe.com/products/photoshop/extend.displayTab2.htmlhttp://www.adobe.com/suppor t/downloads/detail.jsp?ftpID=5486
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4898876#4898876
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4898876#4898876
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4898876#4898876. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS

    I have Photoshop CS5 and a Epson 3880 . The print setting dialogue box won't open when selecting color output PRINTER MANAGES COLORS
    It does ope when selecting PHOTOSHOP MANAGES COLOURS . This is first time in 7 year this has happened.
    Any one with ideas/

    What is your screen resolution?
    What operating system?

  • I need to work with the RAW files on a SONY RX100III. I use Photoshop CS5 and a Mac operating system OSX 10.6.

    I need to work with the RAW files on a SONY RX100III camera. I use Photoshop CS5 and a Mac operating system OSX 10.6. Is there an Camera RAW upgrade or an alternative program that works here?

    You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
    (71894)

  • Photoshop CS5 and Epson 9900, Win 7, 64bits

    Hi,
    I recently upgraded from photoshop cs3 to cs5 and now all of my prints on epson 9900 large format printer come out too dark. The same pictures printed with cs3 look good but not on cs5. How can I fix it? Is there a patch for this issue on Adobe website? Just to clarify: same image printed on CS3 looks good but printed with CS5 looks too dark. It can't be the printer driver issue since there is one driver for both version of Photoshop (6.62, most recent).
    I have Photoshop CS5 and Epson 9900, Windows 7, 64bits.
    I have "Photoshop manages colors" selected and "no color management" for printer - I know the proper set up, I've been doing this for quite some time, so it's definitely not the settings issue or media profile issue. Well, the same settings are use with CS3 and CS5 but results are different, that's why I think it's photoshop's fault. If I can't print color managed prints than CS5 is useless to me.
    Any ideas? I have seen post reg. this but no solution and they go back few years back. Has Adobe finally addressed the issue?
    Please, help.
    Peter,
    http://www.canvasandprints.com
    http://www.abovesigns.net/

    Hi Chris,
    I have the latest patch 12.0.4 but it does not solve the problem. What kind of "user error" are you talking about? As I stated before: I use the same settings in both version of PS: photshop manages color, printer profile: my canvas media profile, BPC: on. In print settings: mode: custom (off, no color adjustment), media type: my canvas type. There is no room for "user error" here.
    As for driver bugs: are you referring to Epson driver? I have the latest driver v6.62. What else can I do? Did i skip something?
    Well, of course I'm using Windows (64bits), so I guess there is lots of room for error there, right , but I don't think it's OS since it prints fine in CS3 but not in CS5.
    Any suggestions will be appreciated.

  • Which iMac for use with Photoshop CS5 and Lightroom

    Any opinions on which iMac is best for use with Photoshop CS5 and Lightroom. Not sure if the 2.7 i5 with 512 graphics card is Plenty of power or if upgrading to the 3.1 i5 or 3.4 i7 is a wiser choice given the price differences. Appreciate the help

    So I was reading over your post, and even though this is older and has to do with CS5, I have some information for CS6 that will be relevant to your question now that it is time to upgade the software. In general Photoshop has always been more about RAM than Processing power, though that is important too. Until CS5 it could never quite take advantage of what multi-core processors really had to offer, and even the graphics card didn't really effect much of it outside of certain features and the 3D optio
    Now that is no longer true and Adobe can effeciently use all aspects of the computer to give you much better performance.
    So much so that I was able to buy a brand New ASUS with the following specs:
    Dual Core 2.2GHz Processors
    8GB of RAM (4GB original to the machine)
    Windows 7 Home Premium 64Bit OS
    320GB HDD w/ 5400RPM
    This machine not only runs photoshop CS6 and Launches in less than 5 Seconds... it can run Premier and After Effects as well, and this Laptop cost me less than $400 (on sale at Best Buy 2 Weeks Ago. You don't have to buy something this cheap, but isn't it great that you can and still run Master Collection effectively?
    You can read my details on how to buy a Photoshop CS6 Laptop, what specs you need, comparison between Mac and PC and watch the video of my Photoshop Speed Test by reading this article:
    http://robertoblake.com/blog/2012/06/buying-a-photoshop-cs6-laptop

Maybe you are looking for

  • How do I change the title of an "episode"?

    Hello, I'm writing a screenplay but when I print out various reports or build my schedule I'm getting a column called "episode". The episode is titled as a very old version of my script and not the current title of my script. Any ideas how to change

  • Error while Assembling the Component in NWDI

    HI All, I am trying to assemble the component in NWDI . The assemly is failing .When  i check the log file i get the following log. 20091125100727 Info   :Starting Step Check-assembly at 2009-11-25 10:07:27.0253 +5:00 20091125100727 Info   :Checks fo

  • MMS not working in iPhone4S when installing config profile with APN

    When we use the iPhone Configuration Utility (either the latest version or previous versions) to create a config profile with APN info, then install the profile to an iPhone4S, we noticed that MMS (multimedia messaging) was no longer working. This me

  • Creative Vision M serious prob

    I have a creative vision m 60bg, now when i put movies on the player they work just fine, but now why is it when i try to put the movie on my player onto a computers hard dri've the movie is always outta sync the words never match whats happening on

  • I just tried to download the After Affect trial and got the following error:

    Tried to find the path to the c++ file but a folder must be hidden.  I am running Windows 8, any help appreciated... really wanna learn this stuff   Also, how do you install After Affects on a different drive other than C:? Exit Code: 6 Please see sp