Photoshop cs5 camera raw (what?) Not 5.7 or better thats for sure.

I was a bit dissapointed today when I downloaded cs5 photoshop trial, and tried to open a canon t2i raw file.
Aaarg..."Document could not be opened".
Is there an update to the shiny new CS5 Photoshop that would install the current camera raw?

jwestveer wrote:
ACR has changed between 5.7 and 6.0 and that camera is no longer supported.
No, ACR hasn't "changed"...the fact is that because of QE, packaging and other Creative Suite requirements, Camera Raw 6 (the one that ships WITH CS5) is already out of date...ACR 6 was done months ago. ACR 5.7 was literally just released a week or so ago and has camera support ACR 6 doesn't have.
John Nack has already indicated there will be an update to ACR to version 6.1 which include all the cameras that 5.7 support (like the 550) and any new cameras that they were able to support.
The EXACT same situation occurred last time with CS4. Photoshop CS4 was released with ACR version 5.0 which didn't support all the cameras that ACR 4.6 supported even though they were released almost the same time. It wasn't long until ACR 5.1 came out.
In the mean time, DNG Converter 5.7 WILL convert the 550 CR2s to DNGs that ACR 6 can read...
And ALL of this camera support bullcrap would be moot if Nikon and Canon quite using proprietary raw file formats instead of a standard.

Similar Messages

CR2 Files Won't Open In Photoshop CS5 - Camera RAW Updates Won't Install...

I've had to take some photo editing work home from the office and I need to open some CR2 (RAW) files on Photoshop CS5. When I drag the files into the program I get a notice that my Camera RAW does not support the files.
I've tried downloading updates for Camera RAW, all the way back to 6.3 (I'm currently using 6.0), but when I go to install I keep getting the message "Some Updates Failed to Install" "Update is Not Applicapable".
The photos were shot on a Canon 5D Mark II, not that it should make much of a difference. I'm wondering what's going wrong? I'm running OS 10.5.8 at home and I'm wondering if that has something to do with it. Any help or suggestions would be greatly appreciated!
Thanks!

If you have CS2 the latest version should be ACR 3.7.
ACR 4.x is only for CS3. If you download the 3.7 ACR and install it correctly ( be sure to follow the instructions precisely!) you should be OK.

Why Does Photoshop cs5 Camera RAW not open CRW files

I need help bad.I am running Windows XP Pro.I had to get Adobe help to install a update to photoshop to get it to open.That part is working.Yesterday I tried to go thru some of my CRW Raw negatives,They will not open in camera raw or bridge or mini bridge.When I try to open it in Photoshop cs5, a box pops up that says "Could not complete your request because it is not the right kind of document.My CRW RAW Negatives are stored on CD-R Disks.So Itried to open them in photoshop CS2 and they opened.If no one knows how to fix this problem there is an Adobe site where you can chat with a tech. online but I forgot how to find it.Does anyone know the site I am talking about?....Thanks.

What size does the properties dialog show for the 6.7 camera raw plugin?
Adobe keeps changing the support pages around, so you might try one of these two:
http://helpx.adobe.com/contact.html
http://www.adobe.com/company/contact.html?promoid=JZEGC
Also, maybe someone has some other ideas in the camera raw forum:
http://forums.adobe.com/community/cameraraw

Can't update Photoshop CS5, Camera Raw, etc. after photoshop reinstall. Every time I try to update recive information - during download this update error apear. Finish and try again later. What to do, without Camera Raw update can't open image from my cam

As I mentioned, there is an error while trying to update photoshop, camera raw, etc. I receives message when you try to download the update, an error occurred. Exit and try again later.
What to do? Without Camera Raw update I can't open Raw files from my cameras. Guy from chat on adobe website just give me link for support website, it's ridiculous.

abdzi schrieb:
Hi,
Finally I made an update. I used download files from Adobe update pages (the same websites that were offline for few days), I couldn't do it automatically from PS CS5 application. Last problem is Adobe Extension update, can't do it automatically and manually becouse there are no update files for Adobe Extension CS5 for Windows (only for Mac). Most important is that my Camera Raw can open files from my cameras now. Thank You for your help.
Hey abdzi could you give a short explanation were you found which download files?? I have the same problem and realy need the Camera Raw update. Please!! Thank you

CS5 camera raw does not support Canon T2i/550D

What a disappointment to have downloaded and installed the trial version of PS CS5 only to find the ACR does not yet support the Canon T2i. Adobe, what are you waiting for?

64polara wrote:
What a disappointment to have downloaded and installed the trial version of PS CS5 only to find the ACR does not yet support the Canon T2i. Adobe, what are you waiting for?
Disappointment? I suppose if you have unreasonable (and ill informed) expectations...
The same thing happened with CS4...Camera Raw 6 for CS5 was done MONTHS ago–well before the most recent round of cameras were added to ACR 5.7 (the most recent version released a week or so ago). The exact same thing happened with CS4 and ACR 5 vs ACR 4.6 supporting more cameras until ACR 5.1 came out.
The update for ACR 6 (prolly 6.1) has already been discussed by John Nack...it'll be out in weeks vs months. In the mean time if you want to access cameras not supported bt ACR 6.0, download DNG Converter (it's free) and convert files to DNG that ACR 6.0 will open...

Can't open .CR2 files in PhotoShop CS5, Camera RAW or Adobe DNG Converter

Firstly take note I shot these with a Canon EOS 450D (or Rebel XSi)...
I see a lot of answers speaking about having the most up to date version of the Camera RAW Plug-in.
I have a similar issue with my .CR2 files... I cannot open them in Camera RAW because it tells me that my camera model or make is not supported by the Plug-in, and so I was directed by other forums to just try converting the .CR2 files to .DNG. I already had the Adobe DNG Converter (version 6.5 I believe), so I tried this. It too told me that my files or camera make were not supported.
However, I have always been able to successfully both open my .CR2 files AND convert them to .DNG. I had not updated anything on my camera nor on my Adobe programs and for some reason this last attempt to open RAW files failed me... I have no idea what change would have led to it. Luckily I shot in both RAW and Large JPG but I certainly don't want to rely on my JPGs of course... Any idea why this problem might have arisen now if it had always worked easily in the past?
Thanks!

Are these the same exact files you've opened before that you cannot now open?
Or are they newly copied files (camera or CF card to computer)?
Can you not open ANY Canon 450D files, even those you find online and download?
What I'm getting at with these questions is to try to eliminate or suspect data corruption of the files on your disk.
Exactly what versions of the various tools do you have, specifically (don't guess - go check)?
-Noel

Photoshop CS5 + Camera Raw + Canon 1000D

Hi guys i have some problems with camera raw, i can't open my file raw from canon 1000D, i'm on snow leopard 10.6.6, photoshop CS5 12.0.2, camera raw 6.3.0.79, photoshop pop this camera isn't supported, but i read in the compatibilies list that really it is, so do you have any sugg?
sorry for my english thank you bye

Did you get the version of the Camera Raw plug-in from Help - About Plug-in...?
Someone else here reported recently that in using Raw + JPEG shooting mode, her raw files were corrupted (specifically, they were truncated). Are you using Raw + JPEG?
-Noel

Photoshop cs5 camera raw process 2012

I have a student with cs5.1, and the most recent version of camera raw allowed. In it you can select the 2012 process but you cannot make any changes - it simply offers to convert it back to 2010 process. Its new to me
Any ideas...

There is a dedicated Camera Raw Forum:
http://forums.adobe.com/community/cameraraw

Cannot Update Photoshop CS5, Camera Raw, etc.

I get an error message, "There was an error downloading this update. Please quit and try again later." I've tried numerous times. Any ideas about what's wrong and how I can get these updates?

If you are trying to update via the Help menu, try using the direct links
Photoshop 12.04
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4973
ACR 6.7
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5373

No matter what I try, Camera Raw will not update from 8.3 to 8.4.1 in PS CC

I've tried completely uninstalling Bridge and Photoshop CC and reinstalling and I'm still on Camera Raw 8.3.
It just will not update.
I also tried the link to manually install and it just says the patch is not applicable.
Any ideas why even after completely removing and reinstalling both Bridge and Photoshop my Camera Raw will not update?
Thanks

When I replied to your post, I was replying to an original post that came in via my e-mail today at 2:30 and was the most recent thing in the ACR forum and had remained unanswered for 1.5 hours, so I decided to reply. Had your post been put in a forum I subscribed to and happen to notice days ago, then I might have seen it, then, but didn't see it until this afternoon, and the e-mail version of your post only had the scant initial information, not the subsequent question and answer about your OS that you'd replied to on the other forum. So as you say, I had not read the thread, because it was on a forum I didn't subscribe to. So be shocked and perhaps awed as is necessary. My treat.
Second, I did make a typo when I said Win8/8/8.1 and it should have been Win7/8/8.1, which might have been deduced by the repeated 8, so you could have asked for clarification.
Seeing as you're on Windows 7 which ACR 8.4 should be compatible with, one minor detail is that I see in the compatible Lightroom 5.4 requirements that it needs Windows 7 Service Pack 1, which would mean you'd want to be caught up on your Windows Updates, which I would assume you'd be.
There are direct links to ACR 8.4(.1) on Jeff Tranberry's blog that are distinct for PS-CS6 and PS-CC so maybe that is what isn't right?
Keeping Photoshop Up-To-Date
You might check what version of PS-CC you have. 14.2.1 is the most current, and maybe that is prerequisite to ACR 8.4.1, I don't know.
If worse comes to worse, uninstall everything Adobe, then run the CS Cleaner then re-install CC Desktop and see what happens as you install PS-CC and it's updates. It may need to be run several times.
Once you're ready to retry your installs, you also might try to Quit CC Desktop and run it As Administrator in case there is a permissions issue.
The CS Cleaner can be found, here:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Camera Raw does not read previously saved XMP files (Canon 60D)

Hi,
I want to ask if it is a real problem or just me doing something wrong.
I open RAW files made with Canon 60D (Photoshop CS5, Camera Raw 6.6), then I do what a do (cropping, exposure changes, sharpen ... etc.), then I click the Done button. Camera Raw saves XMP files along with the RAW files. After this I want to do some more editing, I open the RAW files, but Camera RAW does not "remember" what it did just minutes before. I suppose that it is not reading the XMP files that it created.
So is it me or it is some kind of bug?
I don't have this problem when editing RAW files made with Canon 400D.
Thanks for your time!

Bo LeBeau wrote:
If I understand correctly the issue is not viewing in Bridge, but rather that ACR doesn't remember the changes.
There is a discussion in the Camera Raw forum about this issue of not always reading the changes after clicking Done in ACR.
But no solution.
http://forums.adobe.com/message/4096784#4096784
Yes, ACR doesn't remember/show the changes I made.
It seems that I have the same problem as the other forum member from the link. I tried to recreate the issue, but this time all went well and ACR displayed the changes I made ...
It is strange because I had the issue numerous times on two different windows PC's ...
Message was edited by: Orhan Chakarov

Fuji Finepix X10 in CS5 Camera RAW

Hello
I have a problem to open RAW files from Fuji Finepix X10 in Photoshop CS5 Camera RAW.
Does anyone know how to solve this problem.
Wojtek

The Camera Raw forum is at:
http://forums.adobe.com/community/cameraraw

I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera. I have a Nikon 5100 DSLR Camera. It always displayed

I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera. I have a Nikon 5100 DSLR Camera. It always displayed them in the past. How can I get it to display these photos in Bridge and open them in RAW?

Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
Benjamin

How download cs5 Camera raw update and how make Photoshop the default in the Bridge "open" menu?

Two problems which have defeated me.
First, I have a new Canon EOS 500D and need to download the recent (July 2010) CS5 Camera Raw update. However both of my computers freeze when I move from the Adobe Support web page to the Download web page. Is this a known problem? What to do about it? I am using CS 5 on a Windows 2007 XP computer.
Second, (probably related to the first) opening a file in Photoshop is not listed among Bridge's "OPEN AS" options. Also, the "OPEN" Default is "PAINT". How do I set Photoshop as the "OPEN" menu default?
Thanks for your suggestions. I am truly befuddled by these issues.
JackIsaac

Sounds like something is really wrong with your computer, and it isn't clear what, but if you're just having issues getting to the download link for ACR:
Here is the download page for ACR 6.1 update:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4728
Here is the download page for the CS5 12.0.1 update:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4733
If those links don't work, you can probably find the same updates on the FTP site, although some things here are more than a decade old:
ftp://ftp.adobe.com/pub/adobe/photoshop/
See if Bridge and ACR are any happier after installing these two updates. Make sure you run them as Administrator.
If those still don't work for you, try another browser, where Internet Explorer, Firefox, and Google Chrome should all work.
http://www.microsoft.com/ie
http://www.firefox.com/
http://www.google.com/chrome
There are numerous other browsers, as well, but they probably won't work if the above three don't.
Perhaps you either have a virus that you should scan for, or over-zealous internet-protection software that you could try disabling temporarily.
My favorite free virus/malware scanner is from www.MalwareBytes.com
The payfor version will automatically update itself and scan, but the free version works just as well except you have to manually update and scan.

Canon 6D, Bridge CS5, Camera raw 6.7.1 -- cr2 files not shown

I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?

Frau S aus B wrote:
I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?
The Canon 6D id NOT supported by ACR 6.7.1. It was supported for the very first time in ACR 7.3 whch requires CS6 to run.
Therefore you will never be able to open raw CR2 files from the 6D directly in CS5.
If you do not plan on upgrading, you can download the free, stand-alone Adobe DNG Converter 8.3 (always use the latest version, it's not tied to your version of Photoshop at all), install it like any other application and then run it on each batch of CR2 files to convert them to raw DNG files that you can then open in your version of Photoshop and ACR.

Photoshop cs5 camera raw (what?) Not 5.7 or better thats for sure.

Similar Messages

Maybe you are looking for