Photoshop CS5 Clone Stamp Tool option-click just stopped working, why?

I've been using clone stamp tool option-click (healing brush option-click also) on Photoshop CS5 on my Mac 10.6.5 and it stopped working suddenly on Monday. Had just used it on Sunday. So, I've tried to isolate the problem.
1. Went to Apple store and my keyboard and mouse work fine on their inhouse systems running Photosochop CS5. Problem still exists on home system.
2. Adobe photoshop suggested I go back to Mac 10.6.3. I did and problem still exits.
3. Reset all presets in CS5. Problem still exists.
4. Spent several hours with Adobe Photoshop tech on phone -- he couldn't make it work remotely either using his keyboard. Reloaded Photoshop from scratch. Problem still exists.
Question:
Could this be a hardware problem? Graphic board problem?
Or is this a software problem aside from Mac OS and CS5?

Hi Joan
It sounds like you are not having fun at all : )
>I talked with a for fee Mac guru today who says I need to wipe slate clean and install operating system from scratch since I did not use time machine.
.....you ever notice how easy it is for a consultant to tell you what to do when they don't have to do it?
..... I wonder why the guru thought your system was gone if your new user account was working?
If your new user account is working.... why not use it? The system seems fine but something went screwy with the settings in your original account.
hopefully someone else will chime in here with more insight before you start from scratch.

Similar Messages

Clone Stamp Tool and Healing Brush not working - why?

As pointed out in the thread subject line, both the clone stamp tool and healing brush are not working for me in Photo Elements 7.
When I am attempting to use it, I get the message: "Could not use clone stamp tool because the area to clone has not been defined". Well, this is not the case since I did define it with command Alt + left mouse click.
Background:
Photo Elements 7 is installed in Windows XP Professional SP3. The latter runs as a virtual O/S with Sun VirtualBox on host SuSE Linux 11.1 (Gnome).
I have run out of ideas as to what the problem could be, so I am requesting assistance from the forum community. Thank you very kindly in advance for replies.

Do you mean photoshop elements 7 and not premiere elements?
The fix posted above only applies to linux os systems, which is
different from mac and windows.
On windows vista Alt+left click is to set the clone source.
Try the following steps one at a time.
1. reset the clone stamp tool by clicking triangle on the far left of the
tool options bar and select reset tool.
2. Go to Edit>Preset Manager and click Done in the dialog that appears.
3. Reset the elements 7 preferences by holding down the Shift+Alt+Ctrl keys
at the same time you start elements 7. In the dialog that appears, click yes.
Hope this helps.
MTSTUNER

Photoshop CS4 Clone Stamp Tool behavior

I installed CS4 on a Dual Pentium Xeon 2.4ghz Compaq W8000 system with 3GB of RD 800mhz RAM and Windows XP Pro w/SP3 and all updates. The video card is a ATI Radion AGP-3855 w/512 GDDR3 RAM with latest drivers.
When using the clone stamp tool, after making a sourse selection there is a "trail" that follows the cursor to the destination (similar to using a mouse trail so you can tell where the cursor is on a notebook computer)
When the cursor slows down at the stamp destination the "trail" catches up and covers the destination with the sourse "patch" not allowing precise targeting. It is so cumbersome to use as to make the clone stamp tool almost unusable. The density of the "patch" is not affected by opacity settings.
Is this a new behaviour for this tool in CS4? And if so can it be turned off? Do I have a problem unique to my system?
Murray

Hi Anthony,
Good point and thanks for suggesting the clone source features. I can see that it has tremendous potential and will revisit it to see if it will benifit my work. My immediate problem was that overlay was on as a default and it was not obvious to me where to address it.
I have not used this forum before as I have a couple of gurus I lean on, but was really impressed by the immediate help I recieved here.
I am a wildlife-mammal-stock shooter and I have been using Quick Mask, with a feathered brush to make small to medium selections on a, sometimes, flipped version of the image I am working on, or from another one. Moving the selection to a separate transparent (background) layer and then bringing it into my image as a separate layer and aligning it by setting the opacity at 50% and then using rotation, opacity and layer masking to finish the work.I then use the clone stamp at a low (20-50%) opacity to do additional "painting" and to blend the QM object. This approach is cumbersome, but highly effective, however I may be able to use "your" clone source options for simpler or different tasks.
Thanks,
Murray

Clone Stamp Tool in CS6 Will Not Work on Tiff Files

All of a sudden the Clone Stamp Tool does not work when working on a tif file. Yes I get the Circle with + sign when I press the ALT Key but tool will not clone.

Hi Trevor!
I found out that it affects all file extensions. Files were created after adjustments in Bridge. Layer is not locked. Opacity is at 46. Now as I reviewed your answer, I was looking at a FAQ about the same thing. Truthfully I did not know that you could reset tools.
I found out how to reset the CSTool and voila!!! Now works fine.
Thanks for the advice...
Dan

Photoshop cs3 clone stamp tool - clipping option?

In CS4 there is an option to 'clip' the clone stamp so that it shows an overlay of your cloned area 'clipped to' the brush size. (If you uncheck the 'clipped' option it overlays the whole image and does not limit the overlay to your brush area)
Is this feature available in cs3? On a friends computer, we have found the 'show overlay' option which shows the whole image overlayed, but there is no obviouse one for the clipped option.
If it does exist, where is it?!
Thanks

If I understand you correctly, you may have a system problem (e.g., with OpenGL) if the clone stamp overlay is not confined to the brush shape.
Normally, this is what you see (cloning from the right to the left with a round brush):
If it's not working this way for you, I suggest downloading and installing the latest display driver from the web site of the maker of your video card, and also experimenting with the OpenGL settings in your Edit - Preferences - Performance menu.
CS3 did not offer the clipped Clone Stamp overlay. That's an OpenGL-specific feature, and only Photoshop CS4 and above have the OpenGL support needed.
-Noel

New, improved problem with Photoshop CS3 Clone Stamp Tool

After selecting the clone area with the Alt + L Click, I then release both and press the L Click to get the brush. The + symbol moves along beside the brush. It does not stick at the area that I alt clicked. I have reset the tool, but that has no effect. I have tried the alt-click more than once. Tha pallet does show an offset and has a clone source chosen. It just doesn't stick at the location.
Any help is appreciated.

If I understand you correctly, you may have a system problem (e.g., with OpenGL) if the clone stamp overlay is not confined to the brush shape.
Normally, this is what you see (cloning from the right to the left with a round brush):
If it's not working this way for you, I suggest downloading and installing the latest display driver from the web site of the maker of your video card, and also experimenting with the OpenGL settings in your Edit - Preferences - Performance menu.
CS3 did not offer the clipped Clone Stamp overlay. That's an OpenGL-specific feature, and only Photoshop CS4 and above have the OpenGL support needed.
-Noel

Photoshop CS4-clone stamp tool

Hello
I want to erase the watermark and x mark from a istock image for comping purposes. What is the easiest/fastest way to do this? Clone Stamp/patch tool? If stamp tool, how do you get the tool to delete the x line in a straight line. Mine always copys pixels next to it.
Thanks in advance.

I want to erase the watermark and x mark from a istock image for comping purposes. What is the easiest/fastest way to do this?
Ahem, you buy the stock photo/ artwork? Seriously - if it's just for a mock-up/ design template, than neither you nor your clients will/ should mind the watermarks and as per most such sites' regulations, it is required to be left in place and a mention of the original source to be provided in the copyright. Everything else is just an ill-conceived attempt to bypass their terms and regulations...
Mylenium

PSE6 crashes when using Clone Stamp tool

Hi! I'm new to PSE and have a standard install of 6.0 - no addons. I've been using the editor for just a couple of days now, but I have experience with other graphic editors.
I've just started using the Clone Stamp tool. I've cut out a background from a photo, put it into a new file using New>From Clipboard, and am using the Clone Stamp tool to paint background over the edges of the cut.
So, start Photoshop in edit mode, open picture (.psd created above), select clone stamp tool, right-click and select 100 pixel brush from default palette, place brush some way away from the edge and Alt-click to set "From" point, then move the brush next to edge, click, and start painting over the edge. All OK. Now, move the brush to the right-edge of the picture and start painting so the edge of the brush goes outside the picture a little. This is where it crashes for me. It may be that it's actually the from area that is outside the picture that causes the problem.
Does anyone else get this problem?
Now I'm going back to try again taking great care along the right-hand edge to try and stop it crashing!
Alan

Hi Alan,
is it still crashing for you? I tried the same steps and works fine for me. Are you working on Windows/Mac?

Could not use the clone stamp tool because the area to clone has not been defined (option-click to d

Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. can any one help? I have reset the tools restrted my computer. i am at a loss...

Are you working with more than one layer? If you are working with multiple layers it makes a difference when selecting source spot and then trying to clone to a different layer. I find that I have to be sure I am selecting the corresponding layers for source and then for application when working within multiple layers.
At least for me this is the case when getting that type of message. I am very new to this program though, so maybe someone else has a more concise answer for you.
Good luck and write again if this doesn't help.
Moon52
Sent from my iPhone

Clone stamp tool - can't turn 'aligned sample' option off

HI, I am experiencing a problem with the clone stamp tool and healing brush tool where I uncheck the 'aligned sample' optiom, 'alt' click where I want the sampling to come from, then brush over the area I want to be affected. I have noticed that the results are the same as when the 'algned sample' option is on; the sampling is clearly following the brush just as when 'aligned sample' is checked. I have reset the tool with no effect. Anyone have a solution?
Thanks

Just to clarify, the Aligned option will cause multiple brush strokes to copy from the sampled area as though you had duplicated the sampled layer, hidden it with a mask, and now revealing it. With Aligned off, each brush stroke returns to the sampled area. For example, if you have cloned from a layer with the image of a face, sampling in one of the eyes, multiple brush strokes with Aligned on will result in the face filling in stroke by stroke. With Aligned off, a new eye will be cloned with each brush stroke. And by brush stroke I mean clicking and releasing mouse button.
If this is the behavior you are expecting by not getting and resetting the tool did not fix things, then it is time to reset the application preferences:
http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/how-to-reset-photoshop- cs6s-preferences-file/

Adobe photoshop elements 9 . i cannot get the circle to appear on clone stamp tool and spot healing

adobe photoshop elements 9 , i cannot get the circle to appear using clone stamp tool and the spot healing brush . i`ve tried restating my computer and unloading and loading the adobe disc . but still no good .

I had this same problem and was searching for answers. I also prefer using a circle instead of crosshairs. I hope you've figured it out by now, but, if you haven't, here is the answer (I am using Elements 9, but, it should work for other versions I think):
1. Open up Elements Editor, Click on Edit, Click on Preferences, Click on Display & Cursors.
2. Under Painting Cursors, select Full Size Brush Tip
3. (optional) - if you want crosshairs within your circle, then also select Show Crosshair in Brush Tip.
4. Click ok.
Now use the brush, and it should have a circle to use.
P.S. Sometimes if you have your Caps Lock key on, that removes the circle as well.

Automated checking of Aligned option in Clone Stamp Tool. Intentional? Or my Install?

Hi,
Today I noticed a slightly peculiar behaviour in the Clone Stamp tool when "Aligned" is deselected. Clicking twice on the image with alt or option held down causes the behaviour of the tool to change and "Aligned" to become checked. So if you're not planning on using aligned, you alt/option click your mouse for the source point, decide on a different source point, alt/option click again, and suddenly you find yourself using an aligned clone stamp.
This does not happen with the Healing Brush Tool, which makes me think it's not an intentional short cut. It's also mighty irritating.
I've tried it with both x64 and x32 CS6 on Windows. Happens on both. Does it also happen on Macintosh? Is there any way to switch this behaviour off?
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
Best wishes,
Dave
Title of Discussion was edited by: Dave S-C

OK, according to Jeffrey Tranberry, there is no currently no way to switch this behaviour off - resetting the tool (something I consistently overlook!) reduced the time that the second click took to be recognised, allowing better control of the tool for me. Hope this helps someone in the future.
If changes were to be made to this I'd want the double click switch to be turned off completely.
Message was edited by: Dave S-C (JT's name corrected)

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Try this:
Open your picture file
Access the clone stamp tool
Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
TIPS:
It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
Let us know how you make out with the error message now.

Hi, i am working on photoshop CC classroom in a book, and i find that i cannot use clone stamp tool, why ?

hi, i am working on photoshop CC classroom in a book, and i find that i cannot use clone stamp tool, why ?

Good day!
What kind of Layer is selected, is the Layer locked, …?
Could you please post a screenshot with the pertinent Panels (Layers, Channels, Options Bar, …) visible?
Regards,
Pfaffenbichler

In Photoshop 2014 how do you use the clone stamp tool and keep the image panel from moving

I don't quite know how to use the clone stamp tool in the Photoshop 2014 version. When I click on the clone stamp it creates a duplicate of the image and it moves around and I can not apply the clone stamp to the area I want to correct. How do you lock it down to keep it from moving?

Hi Smoothery4501,
The Photoshop clone stamp tool allows you to copy one area of an image and copy it onto another area.
Click on the clone stamp tool then press the alt key on the keyboard and click on the image to define a source point.
Please refer to below blog for further info
Clone Stamp Tool « Julieanne Kost's Blog
Thanks

Photoshop CS5 Clone Stamp Tool option-click just stopped working, why?

Similar Messages

Maybe you are looking for