Photoshop CS5 does not load with Lion upgrade

The pop-up note says java runtime is needed but internet connection is not detectable. Diagnostics say internet connections exists. CS5 operated well on Snow Leopard for my intel i-mac. Any ideas why CS5 applications will not load on Lion OS?

Hi, Have you tried to manually download it from the Apple Support Page?
If that didn't work, have you tried to download it on another computer and transfer it and install it?
I've found an KB article from Adobe that lists known issues with Adobe products on Mac OS 10.7 Lion.
http://kb2.adobe.com/cps/905/cpsid_90508.html
I use Mac OS X 10.6.8 and Adobe CS5.
-[myimagination]-

Similar Messages

  • Adobe Photoshop CS5 is not working with Lion.

    Adobe Photoshop CS5 is not working with Lion. It is totally non responsive to a point where i cannot work. all other CS5 programs seem to be running well so far. any advice? if no, then how do i revert back to Snow leopard?

    I had real problems with all Adobe apps - it said I needed to install a version of Jave Runtime, but kept saying that I wasn't connected to the internet to complete the action. This was not the case - I was connected to the internet.
    I followed this link : http://support.apple.com/kb/DL1421  to install a version of Java and all Adobe apps fire up now. Haven't done much testing within the apps, but at least I'm further ahead than I was.
    So thanks to the message boards for helping me out.
    Reg

  • External Hard Drive does not work with Lion

    Hi
    My External Hard Drive does not work with Lion this message appears:
    NTFS-3G could not mount /dev/disk1s1
    at /Volumes/My Passport because the following problem occurred:
    /Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
    the MacFUSE file system is not available (71)
    can anyone help?

    Hi,
    See this Discussion:
    https://discussions.apple.com/thread/3191198?start=0&tstart=0
    Cheers,

  • How can I go back to snow leopard my epson stylus Photo TX810FW does not work with Lion

    My Epson Stylus Photo TX810FW printer does not work with Lion how do I go back to Snow Leopard?

    Did you try removing the printer from the queue and then reinstalling it?
    I attempted to print this morning for the first time after upgrading to Lion and discovered that while everything appeared normal on my Epson printer, it would never print.
    I opened System Preference > Print & Scan and deleted the printer.
    I then added the printer back and it now working again. Worth a shoot first I should think.
    Much easier the a downgrade.
    Allan

  • Photoshop CS5 does not print amount of images accurately!

    Photoshop CS5 does not print amount of images accurately!
    what ever you ask for above 1 copy of an image you do not get it..
    you ask for 5 you get 1 you ask for 8 you get 1.. sometimes you get the leftover amount from the previous image printed on the new image..
    adobe support has no idea about this problem..I'm assuming most people print one image and they don't recognize the problem since CS5 is just on the market... try print multiple copies and see what happens?

    The solution is purported to be to get a driver update.
    Since the problem seems to be a "delay" or "staging" of the values being sent to the driver through some intermediate location, a workaround has been proposed that may be helpful.  This may depend on the printer driver:
    1.  Set the copy count you want.
    2.  Hit the Print Settings... button.
    3.  Go into the Printer Driver setup screens and verify the copy count.
    4.  Then do the print.
    -Noel

  • My photoshop CS5 does not show a tool sidebar as my CS3 does.  How do I bring this up?

    My photoshop CS5 does not show a tool sidebar as my CS3 does.  How do I bring this up?

    Window>Workspace>Essentials (Default)
    "Window" is a menu title in the Menu Bar.

  • Numbers hangs / does not respond with Lion OS 10.7

    I have the latest version of Numbers but it does not work with Lion OS X: Numbers hangs / stop responding on opening existing files or creating new files. When I run Numbers "Template chooser" appears, I chose an existing file, then the program reports "Progress... Opening..." and hangs. Your help will be greatly appreciated!

    Thanks
    (1) If you are annoyed by the alternate account you may remove it but it may be useful if you have other questions about an odd behavior.
    (2) Now, it's clear that the problem is in the main set of files, those shared by every accounts.
    I'm not really at ease because I'm not sure of the way apps bought thru the MAS are installed on the HD.
    I will ask you to apply two tasks :
    (a) run the application "FontBook" (from Applications) and ask it to scan the system in search of corrupted fonts as well as duplicate ones.
    (b) Go to : http://www.titanium.free.fr/
    and download the free Onyx dedicated to Lion (I know, it's a beta version)
    Run it to :
    check/repair permissions
    clean most of the caches used on the machine.
    With a bit of luck, you will get a normal behavior.
    May you also, for my own information, tell me :
    (I) if there is such a folder (Frameworks) on your machine :
    On yours, I guess that "Bibliothèque" is spelled "Library"
    (II) if Numbers is stored in the folder "Applications" or in a folder "Applications:iWork '09"
    Yvan KOENIG (VALLAURIS, France) lundi 25 juillet 2011 16:41:26
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • Why does Corel Suite 10 does not work with Lion OS?

    Why does Corel Suite 10 does not work with Lion OS?

    Either it's incompatible or it's a PPC-only application. PPC applications are no longer supported in Lion because there is no longer a Rosetta emulator. Contact Corel for support.

  • My cannon printer worked with snow leopard but does not work with Lion

    My Mf 4350d printer does not work with lion Mac OS X Lion 10.7.2., it worked with Snow leopard no problem. I am a novice with apple so can you tell me how to do any changes carefully.

    Have you downloaded and installed the latest Canon printer drivers?
    http://support.apple.com/kb/DL899

  • Audio does not load with video

    The audio does not load with video in 12?

    Welcome to the forum.
    Can you provide us with a bit more information, please?
    What OS version are you using?
    What are the full specs. of the AV file, that is not Importing with Audio?
    What Project did you set up, at New Project?
    Exactly what steps were used to Import that AV file?
    Did you allow adequate time for PrE 12 to Conform the Audio portion of your file?
    Good luck,
    Hunt

  • Firefox 3.6.15 does not load, if automatic upgrade or issues an error message if installed by hand.

    I allowed Firefox 3.6.15 to update my existing Firefox (3.6.13). After the upgrade, Firefox does not load (not in Task Manager). I removed it, downloaded and installed it by hand, and I get a 1.9.15 not compatible with 1.9.13 error message. When I reinstall Firefox 3.6.13, it works fine.

    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
    See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

  • My belkin play max router software does not work with Lion

    Does anyone know if there will be a fix with this?  My imac is only 2 months old and my router is the same age.  Since upgrading to lion I have frequent dropouts and no working self-healing program.  I have changed channels with some succes but it's much less reliable than pre
    Thanks

    Here's their  reply, so the software is not compatible with Lion and no fixes in vew:
    Dear customer,
    Thank you for contacting Belkin Technical Support.
    I understand your concern and I would certainly be happy to help you.
    I regret the Inconvenience caused,
    Based on the Information provided, I am afraid to state that the Belkin software doesn't support MAC OS X Lion 10.7. As there are no drivers for it. We are aware of this issue. Our Engineers are working on it. We do not have any update about the new release for MAC OS X Lion 10.7. However, will keep you updated if there's any.
    Should you have any further questions, please take a moment to review our Knowledge Base at http://belkin.com/support
    Please ensure that in order to reply to this email, or access any attachments, you must follow the link shown above and click 'update' at the bottom of the email to be able to respond. Do not reply to [email protected] as we will not receive your email.
    Thank you,
    Mousin M D
    Technical Support Agent
    Belkin Technical Support.

  • Photoshop 7 DOES NOT WORK with Leopard ( OS 10.5 )

    If you are not prepared to upgrade your Photoshop 7, DO NOT UPGRADE TO LEOPARD.
    Photoshop 7 and OS 10.5.x (Leopard) are not compatible. When Adobe released Photoshop 7 in 2001 as a Universal Binary for OS9 and OSX they had no idea that Apple would be switching to an Intel chip in 2006. As the release of Leopard is also the end of the Classic environment, this may be the reason Photoshop 7 does not work in Leopard.
    As of the release of CS4, Photoshop 7 can no longer be used as a path to upgrade Photoshop. A full version has to be bought now. But Photoshop CS or later can still be used as an upgrade to Photoshop CS4.
    It is recommended that Photoshop 7 owners still looking to save money on upgrades stay away from eBay, as, unfortunately, much of the software listed is pirated or misrepresented and you will still not be able to upgrade to CS4.
    [topic updated by Forum Host]

    There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

  • VMware Fusion 2 does not work with lion

    I need the VMware Fusion to run my dictonary on the Mac. I have up to now Fusion2 and this does not work with the lion.

    jbjoret wrote:
    VMWare and Parallels hook themselves deep with the OS and are not standard applications.
    Parallels broke in the 10.6.8 update, caused a lot of headaches around here.
    I don't think they follow Apple's rules too well.
    Fusion might be a bit less feature rich, but it seems they are more complaint. Also Apple sells Fusion and likely uses it themselves.
    Both are excellent of course.

  • IPhoto library not loading since lion upgrade

    Hi,
    Since upgrading to lion, iphoto will not load the iphoto library anymore. iPhoto starts with the error message "your iphoto library is either in use by another application or you don't have permissions...". iPhoto was perfectly running on 10.6 (a few days ago) and luckily i have some time machine backups from before the lion upgrade.
    So i tried
    -to start iphoto with option+control and rebuilt the library. Unfortunately it stops with item 9000 or something.
    -tried to rebuild the library with iphoto library manager, but it causes so many problems with duplicates that i stoped the process. I guess it would probably fix the library but too much hassle.
    -tried to restore the library from time machine -> same error message
    Has anyone experienced same behaviour after upgrading to lion? It's too bad i can't just restore from the backup (i thought that's the point of having it) but may lead to the idea, that the iphoto application might be corrupted. I tried to download the ilife image from my university's software distribution server again, but last but not least, lion does not support the server version anymore "the version of server you are trying to connect is not supported...." So no download right now...
    Thx for any help and hints
    regards, dorian

    Hello,
    I am having this extremely frustrating problem as well. My iPhoto was working perfect two days ago and today after installing an upgrade (i always keep up with them) it refuses to load and all i get is a white gear looking shaped loading symbol.
    Help anyone....??
    Thanks!

Maybe you are looking for

  • Can I use iMac display as an external monitor with a pc?

    I have a Windows laptop with VGA output. Can I connect this laptop's VGA output to mini display port of my 27" iMac?

  • How to go about this?

    I have been designing/building websites for over 12 years until 4 years ago when I just stopped doing it. Now, I'm in a situation that I need to do a bit work again. And I need your advice since dreamweavers capabilities has changed so much since "th

  • Print out -- MB90

    Hi Frnds,   I want to take standard Print out of 101 Movement types through MB90 Tcode. For that i have to some out put configuration -- where and how to do that out put control settings. Regards Rakesh

  • Slider control

    Hello again, i am experimenting with the 'slide control'. In the example I'm looking at there is a slider control which updates a numerical label immediately to the left of the slider on the main view (I'm sure you've all seen this before). It's part

  • Is there a way to get an imovie project from your macbook pro onto your ipod touch?

    I want to put a movie i made on my camera roll or get it onto my itouch. Is there a way to do that without spending alot of money.