Photoshop CS5 fails to create HDR from Raw files; what to do?

All of a sudden the Automate>HDR command is not working. The two files are opened in separate layers, an HDR layer is created. Then, zip they are all gone; nothing.
Tried restart, re-open software; anyone have any ideas?

Now each time I try to install iTunes it says "Can not create path (listed above)" I try to open the folder it mentions, it freezes my compunter and makes it crash. Also, iTunes installer will says "Error code 2330. Fatal error while installing"
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Similar Messages

Javahelp Search -- Failed to create URL from jar

When I attempt to use my search feature, I get the following message:
Failed to create URL from jar:file:C:\ulcpen10.jar!/ulcp.hs|C:/src/db/pubs/ulc/javahelp/cp-ulc-generatedid-55.html
Failed to create URL from jar:file:C:\ulcpen10.jar!/ulcp.hs|C:/src/db/pubs/ulc/javahelp/cp-ulc-odbc-tutorial-s-5132529.html
Failed to create URL from jar:file:C:\ulcpen10.jar!/ulcp.hs|C:/src/db/pubs/ulc/javahelp/cp-ulsynchronize-library-sesql.htmlpresumably, the files that were found in the search were:
cp-ulc-generatedid-55.html
cp-ulc-odbc-tutorial-s-5132529.html
cp-ulsynchronize-library-sesql.html
but it seems the URL being built is incorrect. I am building my search like so:
in the xml:
<view>
<name>Search</name>
<label>Search</label>
<type>javax.help.SearchView</type>
<data engine="com.sun.java.help.search.DefaultSearchEngine">
JavaHelpSearch
</data>
</view>
and in the java:
     _jhIndexer = new com.sun.java.help.search.Indexer();
     //outDir is the directory the help is compiled to -- defined earlier
     String searchName = "JavaHelpSearch";
     String args[] = new String[ 3 ];
     args[ 0 ] = "-db";
     args[ 1 ] = outDir + searchName;
     args[ 2 ] = outDir;
     try {
         _jhIndexer.compile( args );
     } catch( Exception e ) {
         e.printStackTrace();
     //addDirectory copies everything from ourDir/searchName to jar/searchName
     jarFile.addDirectory( searchName, outDir + searchName, null );Any ideas how to fix this?
Thanks,
Aarnott

Yesterday I met with the same problem with you, and I read the Javahelp_Guide for several times and today I solve the problem. I reply the topic and want to share the experience with friends.
First cofirm that you have created the html pages, .hs file, index file, TOC file, map file, and be sure they all work well. We assume you put the last 4 files in D:\HelpFile, and the html pages in D:\HelpFile\HelpPage
Now we come to the second step -- generate the Full-Text Search Database.
1. Open "Start" -> "Run" in windows, and input "cmd" command.
2. Switch to your help folder, here we assume it as D:\HelpFile
3. Find the path of the jhindexer in the javahelp\bin folder of the JavaHelp system release, e.g E:\JavaHelp\bin
4. Input the following command in cmd.exe you just open in step 1:
E:\JavaHelp\bin\jhindexer HelpPage
the command means to call the tool jhindexer to generate the Full-Text Search database for the html pages in folder HelpPage
5. you'll find a new folder named JavaHelpSearch generated in the current folder D:\HelpFile
6. Pack all the files in folder D:\HelpFile as a jar file and you can use it in your system
Note: 1. avoid asian character in your folder path, though there's no obvious reason but we should avoid possible error.
2. Full-Text Search need no programming in your program, just do it as the steps ibid.
release: Javahelp 2.0.05
Operation System: Windows XP

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

Try installing it manually from:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Regards,
Ashutosh

Photoshop CS5 fails to open pdfs

Photoshop CS5 fails to open some pdfs created in Indesign. The message 'Could not complete your request because of a program error' comes up. Is this posibly a system issue not seeing the file information or a fault in photoshop.

We can't know. We know nothing about your PDFs nor your system. This could be anything from genuine structural damage in the files to embedding issues with fonts, PDF security stuff or jumbled up color profiles or whatever. You have to provide a lot more details.
Mylenium

Adobe Photoshop CS5 fails to launch on OS X Mavericks

I just updated my Mac to Mavericks. Adobe Photoshop CS5 fails to launch. How can I update to the latest version of Adobe Photoshop? What should I check in my configuration to get things working?
- Ken

CS5 runs on Mavericks. At least it does on my Mini.
Try resetting your Photoshop Preferences, and then launch it. http://forums.adobe.com/thread/375776
Also: you'll need the Mac Java 6 for Mavericks: http://support.apple.com/kb/dl1572 (DON'T get the one from Oracle - it doesn't work)

Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my Canon Mark III 5D Camera.

Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my new Canon Mark III 5D Camera. How can I get my files open to view and edit? I am using LR3, Photoshop CS3 and Bridge CS3. Do I need to upgrade these programs or is there another way to get these programs to recognize my files?
When I try opening the raw images in Lightroom, the thumbnails say "Preview unavailable for this file" ... when I click "import" an error message pops up that says "The files are from a camera which is not recognized by the raw format support in Lightroom."
When I try opening the raw images in Photoshop, an error message pops up saying "could not complete your request because photoshop does not recognize this type of file."
When I try opening the raw images in Bridge, it just shows an icon with the file name and CR2.
Please help!!!

Unless I missed an announcement, today, LR6 isn't available, yet, right? Only Adobe employees and beta testers would know what LR6 does differently at this point and they're all sworn to secrecy.
LR5 is available as a standalone version.
PS-CS6 is available as a serial-number-licensed version.
PS-CC + LR5 are also available as a Photography Plan subscription for $10/month with a minimum OS versions of OSX 10.7 (and probably 10.8, soon) and Windows 7.
Bridge is part of PS, not a separate program.
LR5 standalone and LR+PS-CC plan are both available on this page: http://www.adobe.com/products/catalog/software.html
PS-CS6 can be found on this page: Creative Suite 6 which can be found by searching www.adobe.com for Photoshop CS6 and clicking the Buy link in the on-the-fly search results.
As with any new Adobe software, it might be wise to run it in trial mode for a few days/weeks to see if it works well with your computer, before purchasing and finding out you might need a new computer, first.

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production?

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

How to Create a OLAP Cube in DEV using SSAS from Raw file system backup from Production? I dont have a .abf file available. Two paritions in production are missing data. We were able to get back file system backup which contains the files for these two paritions.
How do I create a cube in Dev using this file system backup.
we are on SQL Server 2008R2.
Thanks,

Would Adobe Photoshop CS5 upgrade work to upgrade from CS3?

Would Adobe Photoshop CS5 upgrade work to upgrade from CS3?

Please don't kill the messenger. You are not addressing Adobe here.
Just a clarification in general:
BOILERPLATE TEXT extracted from the FAQ:
https://forums.adobe.com/thread/375816?tstart=0
Do not be abusive or aggressive in your tone
An aggressive, demanding, accusatory or abusive sounding post will often evoke an aggressive or abusive and unhelpful reply.
Remember, you are not addressing Adobe here in the user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.

Creating XML from raw data

I am trying to create xml from raw data. It works well in the format builder but
when I instanciate the MFLObject and run convert to xml, the output only contains
wrappers for my first field described in the mfl. Are there any known issues
using this progmattic conversion to XML.
My mfl is the following:
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE MessageFormat SYSTEM 'mfl.dtd'>

<MessageFormat name='BossRecord' version='2.01'>
<FieldFormat name='Header' type='String' length='102' codepage='windows-1252'/>
<StructFormat name='TransactionControlRecord' delim='999'>
<FieldFormat name='TransactionTypeNumber' type='String' length='3' codepage='windows-1252'/>
<FieldFormat name='TransactionData' type='String' codepage='windows-1252'>
<LenField type='Numeric' length='4'/>
</FieldFormat>
</StructFormat>
<StructFormat name='Generic' repeat='*'>
<FieldFormat name='GenericTypeNumber' type='String' length='3' codepage='windows-1252'/>
<FieldFormat name='GenericData' type='String' codepage='windows-1252'>
<LenField type='Numeric' length='4'/>
</FieldFormat>
</StructFormat>
<FieldFormat name='IgnoreTheRest' type='Filler' optional='y' length='1' repeat='*'>

</FieldFormat>
</MessageFormat>
Are there any issues with this that are easy to spot?
Here is some sample output:
_BossRecordDoc : <BossRecord>
<Header>0601uskyloupw7vu0 IBVRTR 000006RSQ1010246000000000000020436000001-01-01-00.00.00.00000000000100170</Header>
<Header>90100581D4EBC00AA3C18629ACA0004AC02E54BD289357023141961111F1111 99900207141D4EBC00AA3C18629ACA0004AC0</Header>
<Header>2E54BD2893570231RIBBONS & BUTTONS 9 00000000000010.50CAD00000000000000.5</Header>
<Header>0USD00000000000000.00USD00000000000077.00CAD 0CAUS00000000000000.91KGSA215D100CF3C18619AC</Header>
<Header>90004AC02E54B 01 0001-0</Header>
<Header>1-012003-04-072003-06-2501P/P03003984196000010100000000000000.00CAD 00
FR00000000000000</Header>
<Header>.0000000000000000000.00KGS00000000000000.00USD 00UPS T1</Header>
<Header>0001-01-010001-01-01 0 000000000000000.00000000000000000.00USD0</Header>
<Header>000000000000000.00 1 22222222222220 0100304061DC30500AA3C18629ACA</Header>
<Header>0004AC02E54B1D4EBC00AA3C18629ACA0004AC02E54B</Header>
<Header> 0010001-01-01 00000000000000.00USD00</Header>
<Header>000000000000.00CAD00000000000010.00CAD</Header>
<Header> 00000000000010.00CAD000000000000000010001-01-01K00404862A8D2C00AA3C186</Header>
<Header>29ACA0004AC02E54B1DC30500AA3C18629ACA0004AC02E54B001 PURPLE RIBBONS</Header>
It just keeps finding my first record instead of finding the remaing structure.
I appreciate any help.
Thanks,
Michael

Okay, I've got some coding off a site that looks like it will do what I want. It's quite a robust applications which will do more than I need but as long as it does at least what I want, i could care less. As it will extract files from the datastream for me, it is going to save them to disk.
I believe I have to specify a directory to save it to. I believe this is the line I'm going to modify, so assuming that's the case, how do I specify a directory here:
private File fileOutPutDirectory = null;
Do I have to use absolute paths or can I use relative. Also, what directory construct is expected by java? Anyone with an example of what urls are supposed to look like in this case?
Thanks,
destin

Photoshop CC will not open EOS 40D RAW files

I recently updated to Photoshop CC 2014 but cannot open Canon EOS 40D .CR2 RAW files.
I can open and edit them in Lightroom but if I attempt to 'Edit in...' Photoshop from Lightroom, I get a message suggesting that I update to Photoshop Camera Raw plug-in version 8.6 using the update tool in the Photoshop help menu.
However, the Updates... menu item is greyed out, unavailable.
How can I resolve this issue?

Thank you again, JJMack.
As soon as you start CC 2014 press and hold Ctrl+Alt+shift or CMD+Optiom+Shift Photoshop should prompt it you want your preferences deleted.
I have tried to reset preferences, a couple of times, both by deleting the file 'Adobe Photoshop CC 2014 Prefs.psp' and by using the keyboard shortcut you suggest (also to both older versions of Photoshop on my drive) but the 'Update...' option under Help remains greyed out (on all versions).
All PS version install by default on the Boot disk and happy coexist. Problem arise when you install newer version of PS then use Adobe uninstllers to un-install previous versions. Often this process messes up file associations of the newer install. I just delete the install tree.
I don't recall ever having used an uninstaller. I have twice cloned my entire boot disk however, complete with all applications including Photoshop, most recently about a year or so ago when switching to a SSD. I don't know if that might have messed things up along the way. I have no idea what deleting the install tree entails?
The superscription versions of Photoshop CS6 13.1, CC 14.2.1 and CC 15.0 as well as the perpetual version of CS6 13.0 should have just been updated with ACR 8.6 you should not need to convert to DNG for there version of PS. If your Cannon is very new you may need to convert to DNG for CS5.
Re: Photoshop CC will not open EOS 40D RAW files
My Canon EOS 70D is listed as supported by ACR 8.6 and in fact, having now hunted down the ACR 8.6 download link (why is it so hidden? why isn't incorporated into the Adobe Photoshop CC 2014 installer?) and installed it, Adobe Photoshop CC 2014 does now open my .CR2 files directly in ACR 8.6 in Photoshop.
So problem solved, I guess.
All except the greyed out 'Updates...', which still lingers on.
Thanks again for all your help.

Printing from Raw files?

I have been trying to print directly from Aperture to an Epson 4000 using the adjusted RAW files (Canon 1DMK2). I have the files looking great on the screen, I choose the printer and all of the correct printer settings but the prints are totally blue. If I export the RAW files to jpegs, then bring those jpegs into Aperture and print them using the same print settings they print just fine. Likewise if I use Adobe Bridge to adjust the raw files, then have them printed thru Photoshop using Contact Sheet, they print fine. It's only when trying to print from the RAW files within Aperture that I have problems.
Does anyone have success printing from RAW files to a printer?

The most likely answer to this question lies in a bug
apparently introduced in Aperture 1.5.1. Supposedly
1.5.0 was OK in this respect.
Anyway, if you print RAW using a Contact sheet
profile, the colors are messed up. Any printer. Any
OS. Any camera.
Print that same picture in RAW using single photo on
a page and it will work fine.
Any other format besides RAW works fine in contact
sheets. Many of us are waiting for Apple to fix this
bug. In the meantime, you will indeed need to either
convert the picture to tiff or jpeg OR send it to
some other program to print (Photoshop, etc.)
Interestingly, if you hit print preview, a picture
will get created and loaded into Preview and it will
show you just how badly this is going to print.
Compare some RAWs in single and contact print
profiles to see how the same picture would be printed
very differently. (without wasting ink)
It looks like GeneTucc had it right. I got the latest update that was released today (December 11) and the contact sheets print much better. Still have a long ways to go, but that's just the normal color mgmt issues.

Failed to read data from report file : Reason: Crystal Reports: Print Engin

Hi,
When we try to migrate the crystal reports from BO R2 to BO R3, some of the reports are faling with the error:
Failed to create a new Report.Reason: Failed to read data from report file C:\DOCUME~1\xxxxx.rpt. Reason: Crystal Reports: Print Engine Error
Would please someone help me in fixing the issue.
Thanks and Regards,

Few quick checks to identify the cause -
1. Are you able to run report in your R2 system?
2. In XI3.1, check SIA running on which account.
3. Check the acount have sufficient rights on file system and registry.
4. What's your web server?
Give proper rights and import again. Hopefully it will resolve.
Edited by: Das on Dec 6, 2010 9:47 PM

Choose File Form Data Create Spreasheet From Data Files

I am following the tutorial for LC 8 and when I get to the topic titled "Collecting the data in a spreadsheet" it says to "Choose File > Form Data > Create Spreadsheet From Data Files".
However, when I try to follow that path I do not see a "Form Data > Create Spreadsheet From Data Files" menu option.
What am I not doing properly? How do I accomplish this task?
Thanks!

Thank you so much Paul. I have been trying all day to locate the method by which I could create a spreadsheet using the pdf submit route. I suppose the tutorial in CS4 should have been changed to reflect the changed explanations, but I guess that would be difficult to do. Anyway it worked and I can now do the analysis I need from my customers (lots of pupils!).
Best wishes,
Kevin Palmer

I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by

I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by the SX50, with which I never had any problem. Does anyone have a suggestion on how to fix this problem? Thanks.

Camera Raw plug-in | Supported cameras I do not see that SX60 as supported. Just how new is the SX60 when was it announces. Its support is not even listed in ACR 8.7 RC

How to create database from .sql file

how to create database from .sql file..?? i put the sintax query in a sql file.. and i want to call it in java code..
ho to do it..??

why do you want to do this from java?
i just don't see the point.
find your dba and have him/her run it for you

Photoshop CS5 fails to create HDR from Raw files; what to do?

Similar Messages

Maybe you are looking for