Photoshop cs5, Opening Tiff into Raw. Some open and others don't.
I have installed cs5 onto my Windows Envy laptop. I want to open my tiff into raw. I can do that with some of the tiff files and others I cannot, the option is greyed out. Then the pic. next to it works and the one after does not, so forth and so on. I have gone back and forth in changing the camera raw preferences settings to try and get something going to no avail.
Any answers ??
BK
Thank you for your willingness to help. I have since discovered that if I have layers on that particular tiff file I would have to flatten it first to open in raw. Thanks again
Similar Messages
-
Links are not working well, some do and other don't!
Because I want to have url's like www.name.nl/products/productx.html, www.name.nl/organization/personal.html etc. I made for each map a different little website.
I made the menu manually and for each menu item I made links like: http://www.name.nl/products/productx.html.
So I made on the ftp maps of the different menu items like ;huidaandoeningen, products, behandelingen, contact, etc.
Now the site is online but it's not going well...
Some links are correct like http://www.htcbreda.nl/huidaandoeningen/acne.html
All other menu items below 'Huidaandoeningen' is working well but links below 'Behandelingen' are nog working.
If you try you also see another url address then I gave for instance:
The requested URL /acnebehandeling.html was not found on this server. This while a give it the name http://www.htcbreda.nl/behandelingen/acnebehandeling.html
Als for all the menu items below 'Products' and also the menu items below in the big blue bar on the homepage....
I hope someone can help me. I'm trying to resolve this for a week now and I cannot figure out what is going wrong. Frustrating....The Yahoo! Toolbar extension has been reported to cause this issue.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Useing a PC
Have Photoshop CS5
Suddenly cannot move Raw Files from Bridge (or anywhere else) into photoshop.
I Can move Jpegs into ps the only issue is with Raw files
I did get error1 message but as do not know what that means its no help
any suggestions?Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is. -
PROBLEM WITH RAW FILES with WINDOWS 8.
I have photoshop CS5 extended on my PC; some days ago I had to substitute Windows 7 so I installed Windows 8. Since then my files RAW are not supported by CS5, I cannot see them anymoreYour answer has been very useful. I have made ACR update and now my RAW files are normally supported and visible.
Great !
Thank you very much ... -
Opening Tiff in ACR vs Opening in PS
I found something disturbing about how one opens a Tiff (and possibly jpeg).
If one inputs a tiff to ACR, makes adjustments and clicks done, then subsequently opens the now adjusted image by choosing CS3 in Bridge, that file will open WITHOUT the new adjustments. If you open in ACR, then tell it to open and not simply "Done" it comes with the tweaks. When you do it that way, you see in CS3 "Reading Camera RAW Format" before the image opens. Using Bridge to open straight into CS3, that info item doesn't show. This is also true if you open the file from "Open" or "Browse" in CS3.
We need a flag to allow us to open w/o reading CR or with it. I have several images I had to screw with in CS3 because it seemed the tweaks in ACR for the tiff image was inadequate, which was rather confusing. Many times I finish an image late at night, say done, then reopen the next morning to print, and go straight to CS3.
What other traps for the unwary exist between these methods of opening?I don't know, either I'm not understanding the problem or else I'm not technical enough to realize what is going on. Here is what I did:
Opened a tiff image in Camera Raw and significantly cropped it. Clicked Done.
Right clicked on the image in Bridge and chose to open it in Photoshop.
On my computer it still opened in Camera Raw because I have chosen to prefer Camera Raw for JPEG and tiff images.
Closed Camera Raw without making any additional changes, the image is still cropped.
Did a shift/double click to open the image. This time it opened directly into Photoshop, bypassed Camera Raw, and it was still the cropped image.
However, the thumbnail image in Bridge never did reflect the crop that I made. The preview window showed the cropped image, but the thumbnail never did change. This just seems to be an ongoing anomaly that I haven't figured out.
Like I said, I have chosen the options to prefer Camera Raw for JPEG and tiff images. But everything seems to be working the way I expect it to work. -
My photoshop cs5 will not recognize raw photos from my canon eos 70d
my photoshop cs5 will not recognize raw photos from my canon eos 70d
No. DNG is a RAW format. There are a few small manufacturer specific items that are left out when converted to RAW (for example, Nikon's Active D lighting) that aren't maintained, as well as some Meta data and focus points, etc. Personally I never noticed the difference, but perhaps some do. There is no impact to the image quality, you have just as much post production freedom with DNG.
I did it for a couple years before upgrading to CS6. It's an extra step, but you get used to it and it's not a huge deal. I would put my card in my reader, and download to a temp file. While that downloaded I would go to the fridge and grab a beer [Edit - you can substitute the beverage of your choice ]. Then I would run the RAW to DNG converter, and drink my beer. It was usually done before my beer (if not I got another). I saved the CR2 files as a backup at first, but once I got comfortable trusting DNG I stopped doing that.
Another option is to get Lightroom and use that for your developing. You can then send over a TIFF file with the edits. But in this situation you couldn't send the image over as a smart object (I think, I assume this would use ACR?). -
Does Photoshop CS5 support Nikon D800 raw?
Does Photoshop CS5 support Nikon D800 raw?
Curt Y wrote:
From posts I have read the camera raw starting in 7.2 is far superior to the older version.
Yes, absolutely, no contest. The D800 already has an almost unprecedented dynamic range, and Process Version 2012 (ACR 7.1 and up), with its new highlight recovery algorithm, really makes it shine. Using PV 2010 (up to ACR 6.7) on that camera feels almost like a waste. -
All of a sudden, new tabs have started opening up (in Firefox) advertising games and other stuff. Any idea's of what is going on here?
Try scanning for malware using the removal tools listed near the bottom of the [[Troubleshoot Firefox issues caused by malware]] article.
It might also help if you could copy and paste troubleshooting information into your reply. See [[Use the Troubleshooting Information page to help fix Firefox issues]] for details. -
Does my desktop come with wireless capability with no need for a separate router needed to be purchased, when airport is opened up belkin wireless is checked and other locations are listed but locked? Does my xfinity unit have one or just a modem? TIA
Your iMac does have wireless capability. It does need, however, some wireless network in order to connect to the Internet. It sounds like there are several networks in your area, including one Belkin router that is not encrypted and several other networks that are. I presume that you would know if the Belkin one is yours, and you would have mentioned it. Do not use someone else's network without their permission. In some jurisdictions it is illegal, in others it is merely foolish.
It is impossible to know what Xfinity has given you. Possibly it is only a cable modem, or perhaps it has a router built in. Call them and ask them. If it has a router built in, get them to help you set it up. Note that some tech support people for Internet service providers will resist working with Macs. Be persistent, it is not that different.
If they did not provide a router, you will need to get one. Apple makes the AirPort Extreme base station, the AirPort Express base station and the Time Capsule. Other companies have their own. Be sure you get one that is up to date and has 802.11n capabilities (for the highest speed) and go on from there.
Best of luck. -
Photoshop CS5 broke down twice. I deinstalled and than reinstalled. Now CS5 works but I can't install the updates. "An error occurred, try it again later." But it's not said what error occurred.
Thank you for your help.
WalterThank you very much for your help. Now, I was able to install the update (Adobe Photoshop 12.0.4 update for Adobe Photoshop CS5, Mac). But I couldn’t mark the answer as correct. I didn’t find the „correct“ button.
Kind regards
Walter
Am 25.12.2014 um 16:06 schrieb station_two:
Photoshop CS5 broke down twice. I deinstalled and than reinstalled. Now CS5 works but I can't install the updates. "An error occurred, try it again later." But it's not said what error occurred.
created by station_two in Photoshop General Discussion - View the full discussion
OK, here's the Windows version of the update:
Adobe - Photoshop : For Windows : Adobe Photoshop 12.0.4 update for Adobe Photoshop CS5
and for Mac:
Adobe - Photoshop : For Macintosh : Adobe Photoshop 12.0.4 update for Adobe Photoshop CS5
Of course, ignore the idiotic recommendation that appears there to try to use Help > Updates. We already know that doesn't work.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7043416#7043416 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7043416#7043416
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, some sites will log in but only if the stay logged in box is not checked,I'v have cleared my cashe and internet history looked through securtity setting but nothing, anyone had this problem and has any advice?
See KB Article: http://support.apple.com/kb/HT1274 Changing or resetting an account password
my current country does not have a apple store....
AS are not the only places that repair Macs. Check out the following:
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Also, there are User Groups that can possible help. -
ibooks on my iMac Mavericks open pdf books by Adobe reader and I don't see my marks, which I put when I worked on iPhone . Help me please.
I had the same problem. I deleted Adobe reader and pdfs now open as before.
-
My iPad 2 is only 7 months old and is draining battery life quickly some days and others shutting off at 40% - 50% and when I turn the iPad back on it keeps turning it self off continuously. I have a feeling the battery could be faulty, what do I do?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
When is Apple going to start working with ADOBE and let us enjoy some videos and other things on our beloved iPads and iPhones?
How totally clueless can one be?
Apparently not more than you.
Adobe has given up on mobile flash for any device. They announced this a while ago.
They admitted mobile flash is a disaster and are jumping on the HTML 5 bandwagon.
Adobe has moved on, why can't you?
http://www.technobuffalo.com/mobile-devices/adobe-announces-the-end-of-flash-pla yer-for-mobile-devices/
http://latimesblogs.latimes.com/technology/2011/11/adobe-to-end-mobile-flash-plu g-in-development.html -
Why does my Ipod not synchronize all playlists? Some get synchronized, others don't. Yet there is enough available space.
The S.I. prefix Giga is used to mean both 1000x1000x1000 and 1024x1024x1024. Computer software typically uses the second version, but using the first number makes the same number of bytes appear bigger when expressed as Gb, so is favoured by hard drive manufactures.
80Gb10 = 74.3Gb2
It's a bit like specifying a quantity in gallons without saying whether they are US or Imperial gallons - everybody gets the same volume but one number will be bigger than the other. I could offer you a tank with 10 Imperial gallons of fuel in it - but if I tell you it's 12 US gallons it sounds like you're getting more for your money.
Once the total size of your library exceeds the capacity of your device all you need to do is create some size limited playlists to determine what goes on the device. Don't sync all movies, sync one or two that you plan to watch soon. Likewise with TV Shows. Limit podcasts to unplayed episodes and finally create a music subset. What worked for me for some time was a smart playlist called Steve's Tunes defined as Playlist is Music and Playlist is not Exclude where Exclude was regular playlist that I would manually add to until Steve's Tunes was small enough to fit. These days I run an iPhone and have a number of smart playlists with ? Gb of most played, ? Gb of highly rated, ? Gb of recently added, ? Gb of essentials, ? Gb of unplayed etc. Each time I sync I get slightly updated selection without having to put any extra effort in.
tt2
Maybe you are looking for
-
Can you use an iTunes Giftcard to Purchase iPod Touch 2.0 Update?
This might sound like a stupid question but i am wondering this because on the main page it says (Canada Store) "note that store credits cannot be applied toward this purchase" Help appreciated as I won't spend 20$ on a giftcard if it won't work Than
-
HI, How can i modify a SAP program RVADINI01 and SAP Script RVINVOICE01 to Produce declared invoice on posting billing document in SD. I did modification . But i do not how use NACE and how can check modified out put . what is the tcode to chec
-
I am trying to set up my mother in law with an Airport Extreme Base Station and Verizon DSL long distance in Florida. We followed directions from Verizon to set up the DSL modem in bridge mode. The AEBS is then set up to connect using PPP over Ethern
-
Hi, I hope you can help me. I am writing an java application for a costumer. To retrieve Information written in russian in a JTextField, I am using the following code: JTextField jTextField1 = new JTextField(); byte[] value = jTextField1.getText().ge
-
When I try to share my iMovie video on to Youtube, an alert appears saying that my Youtube username and password are incorrect. I have shared successfully before so I don't understand why cannot do so now.