Photoshop CS5, Performance Issues

Just got a brand new PC at work, and i am experiencing some very strange lagging issues in photoshop. I'll go more indepth in a minute. My system setup is as follows:
Windows 7, 64
Intel i7-2600, Sandy Bridge
16g of ram
Quadro 2000, using 2 24in LED Samsung monitors at 1920x1200
Two LITEONIT-LAT128M2S SSD Drives
All memory resident programs arent even installed, like antivirus and whatnot.
I am currently running the 4/26/11 Quadro performance drivers, as these are WHQL and Adobe/Nvidia certified. I have also tried the latest Nvidia drivers and experienced the same issues.
I see the issues with OpenGL on and off, and combination of all settings. I see ZERO performance issues in any other applications i run - Adobe apps are all that I am having issues with atm.
In the 32 and 64bit exe's (doesnt matter which, though the issue seems MUCH worse in the 64bit exe) i will experience consistent lag in the application with or without a file open. The menus and cursor will slow to a crawl for about 5 seconds, and then pick back up again. This happens with and without files open.
I have tried moving my page file between drives, i have tried shutting all windows aero enhancements off, all in combination with turning openGL support on and off. I have also rebooted between each change.
I also experience an IDENTICAL issue when i open up the CS3 exe.
I also experience IDENTICAL issues with Illustrator, only when rendering bitmap effects to any SVG drawing.
Does anyone have any ideas what could be wrong? This PC should be an absolute monster with adobe software, however my current work experience is nothing short of frustrating.

Noel,
Yes, brand new installation. I cut out all the extra startup processes once i started to see this issue. There is no antivirus running because i disabled it. I have only about 50 essential windows processes running currently, and stripped them out one by one hoping that one of them was the culprit.
There are no newer bios/motherboard updates currently.
There are no processes currently running that are taking up any significant resources.
Any other ideas?

Similar Messages

Photoshop CS5 Performance Problems with Optional Extension Plug-ins Installed

If you installed any of the Optional Extension Plug-ins in Photoshop CS5 (they aren't a part of a default installation of Photoshop CS5) - we determined that some users have had serious performance issues due way these Optional Extension Plug-ins were installed on Mac systems.
We have created the following knowledge base document to help users determine if they are affected by the use of these plug-ins. The document contains instructions on how to remove the plug-ins and restore your Photoshop prefs:
http://kb2.adobe.com/cps/889/cpsid_88974.html
Note: It's important to both remove the plug-ins and restore your Photoshop prefs in order to get back to a 'good' state.

I would try here:
http://www.ononesoftware.com/support/

Photoshop CS5 HDR Issues

Hi,
I've been using HDR with Photoshop CS5 for quite some time, and I'm now switching to CS6, but am having some troubles that I've never had before.
Here's a rundown of what's happening. First, I go to file -> automate -> merge to HDR
I then make the changes to gamma, exposure, etc. I leave the 16-bit and local adaptation alone; I've never changed any of that before. Someone mentioned how that could be an issue, but I never adjust any of that. After making the desired edits of colors, exposure, etc., I hit process. I'll show here what I get in the "preview" window where all of the work is being done, and then what the end result is.
Preview window:
What it comes up with after:
Any thoughts or ideas would be greatly appreciated!

Yes, open a raw file with Photoshop's Camera Raw, then move the sliders around - e.g., Shadows, Highights, Blacks, Whites, to bring the extreme parts of the exposure in.
It's surprising what results can be gotten from a single raw file:
Several examples:
JPEG From Camera:
Processed Raw File:
JPEG From Camera:
Processed Raw File:
-Noel

Photoshop CS4 performance issue

HI
we use App-V for almost all of our applications and we work with a local cache mode
as far as I know - the performance of a local application and the virtual application should be the same even if the package is big. a great example is Office 2010 App-V package which works the same as a local installation
We saw that there are some applications that run very slow comparing to a local installation on the same hardware
specifically - Adobe PhotoShop CS4 is a good example. when we load a 10MB picture and try to make a simple task like mark a selection - it takes forever for the application to response!
the weirdest think is that we tried to sequence the application both in App-V 4.6 SP3 and App-V 5.0 SP2 we got the same results. we tried the default things as reset the client's cache or allowing local interaction, com objects... etc.
I really have no idea what else we can do. as I wrote, larger applications work in our environment just fine, but there are some that stuck us. another application that works slower is NIS. I'm not sure if the performance issue is always from
the same reason but I'm trying to figure out what can we do to improve it
would love to get some ideas
Tamir Levy

Hello,
Since Microsoft made this claim (as stated by you), my recommendation to improve your situation still stands;
Open a ticket with Microsoft to understand the topic. My assumption would be that you could name the engineer who visited you a few years ago, and revisit the discussion you had with him and Microsoft directly.
(the statement of course goes against any independt benchmarking - such as
Project VRC,
acknowledged facts by the Community and more..)
As stated already; If you have tested all that you described, I can't offer anymore suggestions apart from the above.
Nicke Källén | The Knack| Twitter:
@Znackattack

Photoshop CS5 Clipboard Issue (Win 7)

I have a copy of PS CS5 installed and i can only paste an image that i copied from before the program was started. When Ps is already started and I copy an image and try to paste it in PS it will paste the image I copied before I started the program not the one I just copied...
It's a pretty annoying situation... not being able to copy and paste once the program is running. I have to shut it down, start it up again to paste the image I want...
Anybody a solution?
I work on: Win 7 ultimate 64 bit - i7 - 8 gigs ram

function(){return A.apply(null,[this].concat($A(arguments)))}
JanGeloen wrote:
Are you guys sure this isn't a PS 64 bug?
It's clearly a bug with something. But even though you're seeing it in multiple places, please rest assured it doesn't happen for everyone using Photoshop CS5 x64.
Shall we go about describing the differences between your systems (plural) and systems NOT experiencing the problem?
What applications do you have installed. What antivirus? What programs are starting when you boot up / log in?
Here's what's starting on my x64 system (courtesy Autoruns), on which the clipboard works just fine:
AdobeAAMUpdater-1.0 (Adobe Updater Startup Utility)
WebDriveTray (part of the WebDrive application for providing access to FTP sites via drive letters).
avast5 (Avast! Antivirus)
StartCCC (ATI/AMD's Catalyst 10.8 video driver control center)
vmware-tray (part of the VMware Workstation virtualization application)
Outlook.lnk (Outlook 2003 eMail client starts up when I log in)
ShellFolderFix.lnk (a small applet called ShellFolderFix that helps position Explorer windows when first opened)
Skype (audio/chat communications program)
WizMouse (a small applet that directs mouse wheel events to whatever app the mouse is over)
Here are my non-Microsoft shell extensions and drag/drop handlers (courtesy Autoruns and ShellExView):
ACE (AMD Desktop Control Panel, part of Catalyst 10.8 video drivers)
avast (Avast! Antivirus Shell Extension)
CirrusShellEx (provides right-click access to the Beyond Compare 3 file comparison application)
ClassicCopyExt (part of the ClassicShell application that adds enhanced dialogs to copy/move operations)
Create ISO Image from directory (part of the ISO Recorder application that provides access to ISO files)
TortoiseSVN (provides right-click access to Tortoise Subversion)
WebDrive (manages drive letters connected by the WebDrive FTP access application)
There are other things, such as services, that could be involved, but let's start by comparing your systems to these and let us know what's common between them but different from the above lists.
-Noel

In Photoshop CS5 font issue

In Photoshop cs5, Hypatia Sans will only display in all caps. In other applications (Adobe Creative suite) there are no problems. How can I solve this?

Check out the Character panel

Photoshop CS5 - Compatibility issue with nested groups

I'm using Photoshop CS5 to create a multi-layered, group-heavy PSD. The final file is intended for public consumption, so, ideally, I'd like it to be accessible to as many users - and therefore compatible with as many versions of Photoshop - as possible.
However, I just tried to save the file, and was prompted with this message:
This document contains nested layer groups that may change in apprearance if opened in applications older than Photoshop CS5.
Opening the file in CS4 after the save confirmed that a few of the layer groups were indeed corrupt.
Can anyone shed any light on this?

It looks like you're the only person so far who's posted that particular message on the web anywhere!
Out of curiosity, do you have the Maximize PSD and PSB File Compatibility option set to Always in Edit - Preferences - File Handling?
I have no experience with nested groups, myself, but that setting comes to mind as being involved with the kind of compatibility you're hoping to accomplish.
I do know that nested group capabilities have been around since at least Photoshop CS2.
-Noel

Photoshop CS5 Video issues. NEED Help ASAP

I created a video using Adobe Photoshop CS5. In Photoshop, the video is crisp and clear. After I export the video into an "MP4 H.26 Best quality 30 or 48 fps 1920x1080 HD" video, part of the video looks clear, but as soon as the movement occurs, the picture becomes pixilated. I've tried everything that I can think of. I have a still picture in the back ground. There is rain coming down from the top, an object moves across the bottom, and another object "floats" in the air (little up and down movement). Before the rain comes down, everything is clear. Even after the rain (I created) comes down, the movement across the bottom is clear (a video loop from videoblocks.com). But after the rain starts to come down, the still background image (I created) begins to look pixilated, and the "floating" object (Icreated) becomes blurry as well. At first I thought it had something to do with the way I had the rain come down...but in Photoshop, the playback is very clear. Does anybody have any idea how i can save this video without it looking this way? I need an answer ASAP, PLEASE.
Thank you!!!!
Mariposa416

I gave the settings I used in exporting the Adobe Photoshop CS5 video. I want to know how I should change my settings. I may be creating the video all wrong or using the wrong product. I had a photoshop file with layers. I wanted the rain to fall out of the sky, so i made a video with the raindropd falling at a tween of 20 and I had like 380 frames after that. I could figur out how to get another layer to move at a different pace, so I exported the video (many times until i could get it as clear as possible). Then i added the video back in, and added in another layer (the one that was floating in the sky). No matter which setting I used to export the video, it wasn't as crisp as I was looking for. I exported the video and iserted it back in for the movement across the bottom. That came out really clear (but it came from http://videoblocks.com). Do you or anyone else know which is the best settings for me to use in Photoshop CS5? Or is there another program i could use to makke clear videos?
I want the video to be as original as possible.

Indesign CS5 Performance issue in Xenapp 6.5

We are using Indesign CS 5 in Xenapp 6.5.
There is a performance issue while launcing the Indesign (takes min 4 Minutes to launch) and while opening the documnet from the network is also taking time.
System configuration : Virtual machine,Windows 2K8 R2 SP1,32 GB Memory,CPU 4.
Please help to resolve this issue.
Thanks,

Hi,
How is the database server operating system coping in terms of CPU load and memory? and what is the db data cache hit ratio in ST04?
I would look into the following things, network configuration between database and central instance, and the load on the DB server cpu load/memory and possibly the most important the DB2 memory and configuration instead of focusing on the SAP application server in case of high DB times.
Please be aware of the fact that tables in upgrade from 4.6C to ECC increase from about 30000 to 60-70000 and db tuning is the most likely explanation for your problems.
Regards
Sindri

Middle Eastern Photoshop CS5 font issue

Got Middle Eastern Photoshop CS5, the text- even when paste in, is in the wrong direction. last letter comes firs etc. It worked fine till now. Help?

Check out the Character panel

Photoshop CS5 Droplet Issues

So I have to pose this question to you all since we are having a rather massive problem at my work here with this. The company I am working for is a large automotive restoration parts company and we have 7 full vehicle catalogs. Here is a bit of the explanation to what is we are doing.
Basically what is happening is that we use droplets to convert images to CMYK profile for our printer, create a web jpg and thumbnail and place it in the appropriate folder for being transferred to our database. The action we are using for this is as follows.
Save For DB and Web
Save- to a location on our server
Convert Mode- RGB for web
Image size- to reduce the size for web
Export- as jpg for web
Image size- reduces size for thumbnail image for web
Export- adds _thumbnail behind part number
Close
We have 5 different droplets that do basically the same thing in the end. Our work flow here is nothing special but here is now it work. All images are placed on a server(Apple server running Snow Leopard Server 10.8.6) for use in our catalog(linked in to Indesign) all as EPS. For the web jpgs the images are transferred into a large folder which once a week or so we run a bulk loader in our database software for use with our website. Images are transferred to the web server and all is deleted once it database has the image imported.
Now here is the problem. Randomly the droplets will not make one or more of the files when it runs. Most of the time it is perfect and has no issues. Sometimes it will create the EPS and not the jpgs, other times it will create only the thumbnail and others just the EPS and web but no thumbnail. It is just random and across 5 different droplets(only difference between them is where the EPS is saved to, the jpgs are saved to the same place in all of them). We recently updated all the droplets to CS5 .app extension as before we though the issue was because we were running CS3 created droplets but the issue has not changed. I am running them on both an iMac and Mac Pro, both running Snow Leopard 10.6.8 and they both have this issue. I am running the latest version of CS5 with all updates(have CS6 on order and will be trying that shortly). No once else has this issue like I do but I am running the most images on the droplets to place in the database so I think that is why I am seeing the most errors. One of my former coworkers was having this issue for years before I worked here and he was having them until his last day here. I am at a loss but I have a feeling that it has to do with the Apple Server that the department is using. I am not an apple fanboi at all and dislike using apple products but it is what I have to do in order to get work done so I continue to do it. So unless the computer knows I dislike it and is doing this as a form of revenge it has to be something. I personally think it is the server but I wanted to though out there to see what others think it could be.
I decided to make new droplets from scratch and have them saved onto a difference server as well as the original to see if it is a server. The second server that I am saving to has been perfect, while the normal server that is supposed to be is having issues. The server is the same controller, but has different RAID banks. The second server is limited access to only me and the other photographer I work with and is just a backup server.
Anyone have any ideas on what is going on or has encountered this issue before?
Nick

Yes, open a raw file with Photoshop's Camera Raw, then move the sliders around - e.g., Shadows, Highights, Blacks, Whites, to bring the extreme parts of the exposure in.
It's surprising what results can be gotten from a single raw file:
Several examples:
JPEG From Camera:
Processed Raw File:
JPEG From Camera:
Processed Raw File:
-Noel

Boost Photoshop CS5 performance

I just got PS CS5 is there any way (Settings) to boost its speed/performance?

Noel,
Yes, brand new installation. I cut out all the extra startup processes once i started to see this issue. There is no antivirus running because i disabled it. I have only about 50 essential windows processes running currently, and stripped them out one by one hoping that one of them was the culprit.
There are no newer bios/motherboard updates currently.
There are no processes currently running that are taking up any significant resources.
Any other ideas?

Photoshop CS5 Saving Issues

Hey,
So I have a drawing that I drew up in CS5. In this drawing, the layers that I am trying to save as a .jpeg file are without a background color. I am experiencing a problem where when I go to save the image as a .jpeg (or any file type), for some reason photoshop throws in a white background after the save which is not wanted and not part of the image. I just want it to save my image with no background color. I have been able to do this before without having this problem, so I have no clue what could be going on. If it helps, I can upload the .jpeg file. Does anyone have any ideas?

Saving a jpeg is like saving a flattened file, so the jpeg format doesn't support transparency.
You can save the file to a format that does support transparency such as psd, tiff or png.
For use on the web png works well.
MTSTUNER

Premiere Pro CS5 Performance Issues

Hi. I have been using Premiere Pro CS5 5.0.3 for editing videos that I shoot for several years now. I offload all the video files I shoot from a Canon XHA1 camera from a SanDisk compactflash card to a Drobo S Raid 0 array (all the drives in the Drobo are Seagate Barracuda 7200 rpm drives) that I have hooked up (via an eSATA cable).
This has worked well for me but I have been noticing that I am now getting more dropped frame errors both in the program and source monitors. I started a new project yesterday:
General
Editing mode: DV NTSC
Timebase: 29.97fps
Video Settings
Frame size: 720h 480v (1.2121)
Frame rate: 29.97 frames/second
Pixel Aspect Ratio: D1/DV NTSC Widescreen 16:9 (1.2121)
Fields: Lower Field First
and when I imported the footage into Premiere Pro I started getting more dropped frames and sluggish playback as to render Premiere Pro very aggravating. It is still usable but the situation is growing worse. Here are my system settings that I dumped from Belarc:
Operating System
System Model
Windows 7 Professional (x64) Service Pack 1 (build 7601)
Install Language: English (United States)
System Locale: English (United States)
Installed: 4/1/2011 12:30:28 PM
Boot Mode: BIOS (Secure Boot not supported)
No details available
Processor a
Main Circuit Board b
3.20 gigahertz AMD Phenom II X4 955
512 kilobyte primary memory cache
2048 kilobyte secondary memory cache
6144 kilobyte tertiary memory cache
64-bit ready
Multi-core (4 total)
Not hyper-threaded
Board: ASUSTeK Computer INC. M4A79XTD EVO Rev X.0X
Serial Number: MT7001K65700722
Bus Clock: 200 megahertz
BIOS: American Megatrends Inc. 2102 06/17/2010
Drives
Memory Modules c,d
13096.83 Gigabytes Usable Hard Drive Capacity
10398.62 Gigabytes Hard Drive Free Space
HL-DT-ST BD-RE BH10LS30 ATA Device [Optical drive]
PLEXTOR DVDR PX-760A ATA Device [Optical drive]
Drobo 3rd Gen DRDR3- ATA Device [Hard drive] (8796.09 GB) -- drive 3, SMART Status: Healthy
Kingston FCR-HS219/1 USB Device [Hard drive] -- drive 4
Kingston FCR-HS219/1 USB Device [Hard drive] -- drive 7
Kingston FCR-HS219/1 USB Device [Hard drive] -- drive 5
Kingston FCR-HS219/1 USB Device [Hard drive] -- drive 6
Seagate FreeAgent GoFlex USB Device [Hard drive] (1000.20 GB) -- drive 8, s/n NA05WRQ4
ST31000528AS [Hard drive] (1000.20 GB) -- drive 1, s/n 6VP3PB7D, rev CC38, SMART Status: Healthy
ST32000542AS [Hard drive] (2000.40 GB) -- drive 2, s/n 5XW0A59J, rev CC34, SMART Status: Healthy
ST3300622AS [Hard drive] (300.07 GB) -- drive 0, s/n 4NF1TJ5M, rev 3.AAH, SMART Status: Healthy
12288 Megabytes Usable Installed Memory
Slot 'DIMM0' has 4096 MB (serial number SerNum00)
Slot 'DIMM1' has 4096 MB (serial number SerNum01)
Slot 'DIMM2' has 2048 MB (serial number SerNum02)
Slot 'DIMM3' has 2048 MB (serial number SerNum03)
Local Drive Volumes
c: (NTFS on drive 0) *
300.07 GB
158.49 GB free
d: (NTFS on drive 1)
1000.20 GB
771.85 GB free
f: (NTFS on drive 2)
2000.40 GB
1462.25 GB free
g: (NTFS on drive 8)
1000.20 GB
939.29 GB free
p: (NTFS on drive 3)
8795.96 GB
7066.74 GB free
* Operating System is installed on c:
Network Drives
None discovered
Users (mouse over user name for details)
Printers
local user accounts
last logon
Mark Mecca
10/22/2014 1:50:04 PM
(admin)
QBDataServiceUser21
10/22/2014 1:50:50 PM
local system accounts
Administrator
7/14/2009 1:08:59 AM
(admin)
Guest
never
HomeGroupUser$
never
Marks a disabled account; Marks a locked account
Amyuni Document Converter 2.50
on LPT1:
Epson ESC/P-R
on USB001
EPSON Stylus Photo RX580 Series
on USB001
HP LaserJet Professional P1102w
on USB004
Microsoft Shared Fax Driver
on SHRFAX:
Microsoft XPS Document Writer
on XPSPort:
StudioJet 50
on USB002
Controllers
Display
ATA Channel 0 [Controller] (3x)
ATA Channel 1 [Controller] (3x)
Standard Dual Channel PCI IDE Controller (3x)
NVIDIA GeForce GTX 285 [Display adapter]
LG W2340 [Monitor] (23.1"vis, s/n 001NDCRGL339, January 2010)
Samsung SyncMaster [Monitor] (20.2"vis, s/n BR20HCGL502449, May 2006)
Bus Adapters
Multimedia
Microsoft iSCSI Initiator
Standard Enhanced PCI to USB Host Controller (2x)
Standard OpenHCD USB Host Controller (5x)
Blackmagic Audio
Blackmagic DeckLink WDM Streaming
Blackmagic Driver
High Definition Audio Device
NVIDIA Virtual Audio Device (Wave Extensible) (WDM)
Virus Protection [Back to Top]
Group Policies
Norton AntiVirus Version 21.6.0.32
Norton Security Suite
None discovered
Communications
Other Devices
Microsoft ISATAP Adapter
↑ Realtek PCIe GBE Family Controller
primary
Auto IP Address:
192.168.1.104 / 24
Gateway:
192.168.1.1
Dhcp Server:
192.168.1.1
Physical Address:
E0:CB:4E:E5:E8:D3
Connection Speed:
100 Mbps
Teredo Tunneling Pseudo-Interface
Networking Dns Servers:
75.75.76.76
75.75.75.75
1394 OHCI Compliant Host Controller (Legacy)
HID-compliant consumer control device
HID-compliant device
USB Input Device (3x)
HID Keyboard Device
HID-compliant mouse
USB Composite Device
USB Mass Storage Device (2x)
USB Printing Support
USB Root Hub (7x)
Generic volume shadow copy
N:\
O:\
Q:\
R:\
My question is how do I trouble shoot this problem? I suspect that my video card is getting old and needs to be replaced but I don't want to buy another one as yet (especially when I don't know if it will solve the problem).

Do the PPBM5 Benchmark and send the results to me by PM, in addition to sending the results to Bill as indicated. I'll have a look at what might be going on here.

MacBook Air core 7i, 8mg,512 gb and photoshop CS5 performance

Hi everyone, Still saving to buy a MacBook Air. I use CS5 for very simple work like retouch pictures and insert lines as scales. Could you tell me about yous experience with this software using a MBAir. Best regards

Well, look like I will be good with this configuration and CS5.

Photoshop CS5, Performance Issues

Similar Messages

Maybe you are looking for