Photoshop cs5 white color problem

Hi,
I have photoshop cs5 . When I am trying to select white color from foreground / background color giving color code "ffffff" ,255,255,255 but showing cream color. Please .....need a very urgent solution.
Subrata

Hi Mylenium ,
Thank you for the early response which helped  me to solve the  problem .
Solution : In windows 7 ->search programs and files ->enter "dccw.exe" ->enter  will open "Welcome to color calibration"  then follow the steps.
Thanks again
Subrata

Similar Messages

  • Photoshop CS5: Any color with zero red information will turn black

    I've been having this problem ever since I installed Photoshop CS5 (12.0.4) on a Windows 7 64-bit machine. I've used the program on a Windows Vista 64-bit PC in the past with no problems.
    Any color that has zero red information will turn black when in RGB mode and in either 8 or 16-bit mode. If I use the paintbrush, for example, a color with RGB 0/100/100 will be black. However, the color 1/100/100 will not. This problem also occurs with imported images. I've only tried JPEG and PNG so far. The problem does not save out though, as any image exported from Photoshop will appear fine. The issue seems to go away when in 32-bit mode, but it's a little RAM-intensive, and the file sizes are quite large.
    I have reinstalled Photoshop, reset its preferences, and reinstalled my video card's drivers (I have a Radeon HD 7870). My PC has 8 GB of RAM and plenty of free hard drive space.
    Below is a screencap of what's going on. I'm a bit lost here...any help would be greatly appreciated!

    It's a well-known issue with current ATI drivers and Photoshop's GPU-accelerated color-management logic.
    You can work around it a couple of different ways:
    1.  You can install ATI's latest Catalyst 13.2 beta driver, which does solve the problem, or you can uninstall and drop back to Catalyst 12.8.
    2.  You can switch to Basic GPU mode (and restart Photoshop).  Basic mode moves the color-management logic into the CPU.  This might be a workaround you'd prefer to take until AMD releases their next non-beta driver where the problem is solved.
    See also:  http://forums.adobe.com/message/5004198#5004198
    -Noel

  • Photoshop - Motion - DVDSP Color Problem

    This message is crossposted in the Motion Forum because I'm not sure where the solution is to be found...
    I'm putting together a dvd and I wanted to create transition animations to go between the menus. I've run into a bit of a color problem, however. To explain:
    I created my main menu as a layered photoshop document (8-bit RGB, NTSC colorspace). I brought that menu into Motion, preserving all layers. I animated those layers in motion so that at the end of the animation they were another menu on the dvd, then I exported the last frame of the animation, brought it back into photoshop, and made everything line up so that it precisely matched the final frame of the animation, then saved that PSD as a new layered document. Finally, in DVD Studio Pro, I brought in the two Menu PSDs and the animated transition.
    The problem I'm running into is that the color on the transition animation is washed out and somewhat desaturated compared to the menu PSDs. Rather than the seamless transition from layered menu PSD to animation and back to layered menu PSD, you can see this altered color "pop" on the animation.
    Here's what I've checked and tried:
    -I've exported the motion project as every codec that made any kind of sense (Animation NTSC, Apple Pro Video NTSC, etc).
    -I've brought the Motion project directly into DVD Studio Pro, rather than exporting it.
    -Using the color inspector in both Photoshop and Motion, I can see that all RGB values match exactly as they should.
    -When I exported a frame of the animation and brought it back into Photoshop to create the second layered menu, the color matched exactly. In fact, I did the alignment using the "difference" layer mode, and there was no color shift at all.
    So... any ideas?
    Also: I'm going from these layered menus to a video track (first frame matches the layered menu) to another layered menu (matching the final frame of the video track)... that is the most sensible way to have animated transitions between menus, right?
    Thanks in advance for any insights.
    -W

    Well, I found a solution... DVDSP didn't like the image in NTSC, but it seems to work with Generic RGB, provided I redo all of the animation from scratch using the same Generic RGB PSDs. A bit of a pain, but I suppose that's why I did this test after completing only one of the many animations the project will demand.
    Thanks everyone for the insights.

  • Photoshop CS5 and 3D problem

    Hi!
    I installed photoshop CS5 Extended and unfortunatelly the 3D menu options are all grayed out.
    My graphic card: ATI Radeon HD 3600
    I enabled the OpenGL drawing. In the Preferences menu the 3D panel was active after i turned on the OpenGL drawing, but everytime I want to use some 3D feature the program tells that  - for example: "The command create 3D from 2D is not currently available." OR "The command create repoussé from layer mask is not currently available."
    I don't know what could be the problem or maybe I need better graphic card?

    Hi, for some strange reason all of the 3D menus in my CS5 extended are not displayed on my workstation but up and active on my laptop and I just cannot find the reason why. I have a Radeon 4870HD 1GB DDR5 and have downloaded the latest drivers including open gl3.2 but it makes no difference, have you any idea would could be wrong.
    I have looked in Menus and all of the data is there but it just wont display on the menu bar, its driving me nuts!
    Many thanks David

  • Photoshop CS5 - Image resize problem with move tool

    Hi People
    Here's my problem
    When I try to resize an layer using the move tool (as opposed to the Free Transform tool), while I'm in the process of moving the scaling handles, the bounding box reflects my movement but the layer preview stays at it's original size. When I stop moving the handles there is a few seconds delay and then the new scale size shows up. If I try to move the handles again, without commiting to the transform, the layer preview reverts back to it's original size until I've finished moving the handles.
    I didn't have this problem with CS4 and I've only recently upgraded. I work around this problem by using the proper Free Transform tool (ctrl+t) but it would be nice to know why the hell this happens. It seems to me to be more of a graphical glitch than a software preference but I thought I'd check just-in-case.
    Specs:
    Photoshop CS5 V12.1 x64
    PC
    Intel Xeon W3505 @2.53GHz
    Nvidia Quadro FX580
    12 GB RAM

    ace591 wrote:
    Hi People
    Here's my problem
    When I try to resize an layer using the move tool (as opposed to the Free Transform tool), while I'm in the process of moving the scaling handles, the bounding box reflects my movement but the layer preview stays at it's original size. When I stop moving the handles there is a few seconds delay and then the new scale size shows up. If I try to move the handles again, without commiting to the transform, the layer preview reverts back to it's original size until I've finished moving the handles.
    I also read you you tried updating your video dirvers and your syste crashed and you had to roll back.   Make sure you have downloaded the latest correct drivers. If that does not work try turning off Open GL in photoshops preferences.
    On my old XP 32 bit system CS5 movet tool with transform dialog does not fail like on your system. I can move the handles time and time again without commiting the transform. The only way to have Photoshop revert the transform back to the original state is to press the ESC key to cancel the uncommitted transform.

  • ACR to Photoshop CS5 window focus problem.

    Running Photoshop CS5 on Win7, both 64 bit. No problems for months, then recently this minor "annoyance" appeared.
    I "host" ACR via Bridge, with the windows for all three apps maximized. I double-click a raw file in Bridge and ACR opens. I make my ACR adjustments, or not, and click "Open Image" to pass to Photoshop.
    The images passes into Photoshop OK, but the Photoshop window does not receive "focus". Instead, the ACR window closes, leaving the underlying Bridge window displayed. But then no window has focus.
    When I click once on the Photoshop tab, I get a screen flicker, like a window is being minimized, but the Bridge window remains displayed. I click again on the Photoshop tab and it comes up, full screen with focus.
    If I take the ACR window out of "maximized" mode, the problem does not occur. Raw images pass from Bridge through ACR to Photoshop with proper window focus. Opening tif, psd, or jpeg images via Bridge is no problem. Only when raw images pass through a maximized ACR window does Photoshop fail to receive focus.
    A few days ago I used the Windows 7 "snap" feature to place the Photoshop window and ACR window side-by-side. This is done by dragging a window off-screen until it turns blue and then releasing. I believe this action caused the problem I'm having now. I've unsnapped, resnapped, and unsnapped the Photoshop and ACR windows several times, hoping to clear the problem, but it remains.
    Keeping the ACR window out of maximized mode is an easy work around, but the mystery remains and I hate mysteries.

    I know how you feel, I've had a few problems like this with CS5. I can only think of two suggestions:
    1. Disable Windows 7's fancy desktop (Aero peek, or whatever it's called) to see if that helps.
    2. Make sure you're sorting by filename in Bridge. I have noticed that sorting by metadata causes Bridge to sometimes steal focus when it's not wanted. I love Bridge, but christ it needs a good sorting out.

  • Photoshop CS5 ruining color now?

    Hi all.
    I captured a screen shot on my Mac using Grab, and pasted it into Photoshop.  The color was way off, with a pinkish cast added.  You can see a comparison here; the original is on the left and Photoshop is on the right.
    I brought this split-screen shot into PS and the cast got even worse.  I tried both TIFFs and PNGs, and Photoshop is wrecking the color.  I can't find any explanation in the settings.  Any ideas?  PS is pretty much unusable at this point.

    Mobius Strip, discussing the profile of screen grabs is all distracting twaddle…
    Since you don't seem to be aware of this, your Color settings are located here Edit > Color Settings. You need to make sure these settings match in CS4 and 5, and that no "Convert to…" settings are switched on in either. 'Convert To…" will automatically convert opened documents to your default profiles, specified in this dialog. Which you don't want.
    You need to develop some basic understanding of Color Management.
    what is Photoshop displaying when "proof color" is off?  Because it's not what other apps are showing from the same files.
    It is attempting to display the actual colors contained within the document. Whatever profile that document may be in. It uses the monitor profile, which it assumes to be accurate, to do this. This attempt is restricted only by the full gamut (range of colors) available on your monitor.
    There were no changes to Color Management features between Photoshop CS4 and CS5. In every resect they will display colors the same. To be 100% sure than Photoshop is behaving the same in both cases, make sure also that Open GL is consistently switched on or off for both versions.

  • Photoshop CS5.1 unexpected problem

    Just updated my Java (JavaForOSX2014-001.dmg) and now Photoshop CS5.1 won't work. "An unexpected and unrecoverable problem has occurred. Photoshop will now exit." Please help! I am on OS X 10.10 Thanks!

    Let Apple know about the problem in MacOS 10.10, so they can fix it before releasing the final version of MacOS 10.10.

  • How to always show rulers in Photoshop CS5 and other problems

    Does anyone know how to make Photoshop CS5 always show rulers in mac? I have not have this issue with any other PS. I need the rulers to drag guides contantly, but photoshop cs5 would not show the rulers automatically. Everytime I have to go to View --> Show rulers or the shortcut command + R. Is there a way to instruct Photoshop to always show rules with any file I open or create?
    I have many other issues with Photoshop CS5 that CS2, 3, and 4 had out of the box... It is very frustrating that I spent all this money and instead of working, I have been on the phone with Adobe for hours... I am very disappointed so far.
    I have had CS5 Master's Collection for 2 months now on Mac 10.6.7. I have reinstalled Photoshop 3 times as some shortcuts were not working like shift plus scroll to inscrease to 100%, 200%, etc.
    The other thing that still does not work and Adobe has not offered a solution is that my Photoshop would not append extensions. Regardless of the Preferences settings, all my files get saved as JPG instead of jpg... I wonder if any of you out there have this issue as well?
    Thank you.

    I believe my computer and its account are healthy. I just bought the mac pro with solid state and the only programs I have installed are the Master Collection CS5.
    I have good news though - After two months of waiting, I was finally able to speak with Adobe specialists yesterday and they changed the shortcut for Save As that Photoshop ships with from Command + Alt + S to Command + Shift + S - and miraculously now Photoshop appends extensions!!!
    However, my question about always displaying rulers remains. We got disconnected and I didn't have a chance to ask them (I was on hold for an hour and a half!)

  • Adobe Photoshop CS5 Extended Installation Problem

    I tried installing Adobe Photoshop CS5 Extended from the CD on Mac OS X Version 10.6.8 but installer kept unexpectedly quitting. Has anyone else experienced this as well, if so how did you fix it? Thanks!

    It didn't work for the new user account either.
    The error message is:

  • Photoshop cs5 upgrade installation problem

    I just purchased a Photoshop cs5 upgrade (upgrading from cs2).  There were no instructions with the disk. I put the disk in my pc's DVD-ROM drive, and the computer started reading it, but nothing appeared on my monitor. The computer stopped reading the disk after a short time period. There was never any indication, on the monitor screen, that anything was installing, or had installed. My pc's os is Windows XP professional, and it appears to satisfy system requirements. I have eset smart security 5 installed on this pc. How can I get this upgrade to install?

    If the Autorun option is disabled (and it frequently is because of security concerns) the setup program will not launch automatically on inserting the disk.
    Use Windows Explorer to see the contents of the disk. Double-click on the .exe file to launch the setup wizard. Follow the onscreen instructions there on.

  • Photoshop CS5 Printing Preset Problem

    I am trying to print from Photoshop CS5 to a Konica Bizhub c451 printer that uses account tracking and user authentication.  But, when attempting to print from photoshop CS5 the printer preset doesn't have the same options (doesn't allow us to put in owner information) as the other CS5 products.  For example I am able to print from Illustrator CS5 but not Photoshop CS5.  I am also able to print from Photoshop CS3 on the same computer but not CS5.  Any ideas?

    SomeOne121 wrote:
    Any other suggestions?
    Get a updated driver that supports application running in 64bit mode, or a new printer with drivers that supports application running in 64bit mode.

  • Photoshop CS5 - Surface Blur Problem

    Hello ... I have Photoshop CS5 and when I run Filter>Surface Blur, it takes about 27 minutes to execute - I would say that is WAY TOO LONG EH!
    I have an iMac with 8gb of memory, I have 600gn of free space, 70% of memory (5400nb) allocated to photoshop.
    Something is not right - what should I check next?

    You don't say the pixel dimensions of the image, the bit depth of the image or the filter settings. 27 minutes could be a typical time for an enormous 16-bit image with the filter settings cranked up. Consider providing full details.
    Also see thread: CS6 Surface Blur Slow

  • Photoshop CS5 Print Printing problem: print count and print to ICC profile

    Since Adobe still haven't acknowledge the printing issue with CS5, I start this thread to report my own problems.
    Problem 1:
    print copy count is not working. The first print is always one print regardless how many copies you set in the dialog window. The next print will actually print the copies set in the previous print job.
    This is a well documented problem, and until today no fix.  I am not too worried about this problem because I can always print one copy each time to get job done, until the day Adobe acknowledge and fix the problem.
    Problem 2:
    when I let the Photoshop manage color and print to a custome ICC profile (generated by Spyer3Print), Photoshop RANDOMLY decides to print a light colored magenta cast picture.  It's like Photoshop has used the wrong ICC.  Now every time I print a 13x19, I have to pray.  Because this thing is so random, I can't even reproduce the problem consistantly.
    here's the information about my system:
    Windows 7 Ultimate 64Bit (not a fresh system) with 8GB RAM.  Printer drivers installed: Canon Pro9000II, Canon MP600, Epson 1400.
    I experience problem 2 after I installed CS5 with Epson 1400 printer, but not too frequent.  Later on I installed drivers for Epson R1800, Epson R2400, and I mainly print with R2400.    All the printer drivers, software updates are the lastest available.
    I was a software developer. I wrote windows application before. I am pretty sure the problem is with CS5 based on my knowledge.  If I wrote an Windows application that crashs Windows or another party's appliction, I certainly would not blame Microsoft or another party for not writing a bulletproof system. I would try to find a workaround in my own application.  That's just my take. Adobe may have different mind set. They are still pointing finger to MS and Epson.

    I don't condone the problems, but a workaround I've recently read about for the copy count problem is to do the following, in order:
    1.  Set the copy count you want.
    2.  Click the Print Settings... button to enter the printer driver setup dialog.
    3.  [OK] out.
    4.  Print
    This is reported to get the proper copy count into the print driver and make it "stick".  I just tried it and it seems to work.
    Keep in mind you may want to go through this again after printing to get the copy count to default back to 1 for the next print.
    -Noel

  • Photoshop CS5: Eraser + Brush problem

    Hi! I've a problem with the erase pencil in CS5.
    The same thing happens with the brushes....:
    It's only working horizontal or vertical. What can I do...?
    Does anybody know this issue?
    Thx

    If any tool works like a modifier key is pressed it might be worth checking out the Link in this thread
    http://forums.adobe.com/thread/784569?tstart=0
    72.
    Anyway, you give precious little information as to Photoshop and OS versions … you could read this:
    How To Get Help Quickly!

Maybe you are looking for