Photoshop CS5 will not start after Outlook

If I start Outlook (Office 2007) as the first application after loading OS (Win 7 Ult, 64 bit), Photoshop CS5 will not open (message: "needs to close down). I then have to log off and in again and start Photoshop before Outlook to get it to work. I seem to remember having this kind of problem some years ago - but do not remember whats caused this problem. Is there anybody out there having the same kind of trouble? Or even better - the solution?

Hmm... I have CS5 Master Collection, and MS Office 2007, and I have never had any problems opening ANY program, in ANY order
My hardware and OS is linked here... http://forums.adobe.com/thread/652694?tstart=0 - you might want to post details in case someone is able to spot a problem based on more information

Similar Messages

  • Photoshop CS5 Extended - Not starting after many years of use.

    I have Photoshop CS5 Extended. I have had this programme several years now,  which I use on my Mac. 10.7.5. I have today tried to open an image in my photoshop and is giving me all sorts of trouble. What can the problem be?

    Corruptions can and do occur. Try restoring preferences.
    FAQ: How do I reset my preferences?
    Nancy O.

  • Photoshop CS5 will not open

    My photoshop CS5 will not open either from the desktop or from the program list. I can open Bridge but when I then try to view a photo in photoshop I get a message that says Bridge has stopped working and will have to close down.

    Please read below item and provide relevant information.
    http://forums.adobe.com/thread/419981?tstart=0
    Boilerplate-text:
    Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

  • Photoshop CS5 will not open raw files from Nikon D810. What do I need?

    Photoshop CS5 (bought in 2011) will not open raw files from Nikon D810 (bought in 2014). Is there a patch?  Is there something I can do? 

    YAY!!! Success. Thanks Jim.  I have the raw file for this image. ABC OPEN: Dancing water spouts in severe weather   I'm such a noob, I hadn't even set up the correct date on the camera.
    ABC OPEN: Dancing water spouts in severe weatherFran McFadzen captures a once in a lifetime photo of two dancing water spouts near Rockhampton.
    View on open.abc.net.au
    Preview by Yahoo
          From: JimHess <[email protected]>
    To: Fran McFadzen <[email protected]>
    Sent: Monday, 26 January 2015, 10:20
    Subject:  Photoshop CS5 will not open raw files from Nikon D810. What do I need?
    Photoshop CS5 will not open raw files from Nikon D810. What do I need?
    created by JimHess in Adobe Camera Raw - View the full discussionThank camera requires Camera Raw 8.6 which isn't compatible with Photoshop CS5. But you can download DNG converter 8.6 or newer and create digital negative (DNG) copies that will be compatible with Photoshop CS5. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7130665#7130665 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7130665#7130665 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Camera Raw by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Photoshop CS5 will not launch

    Photoshop CS5 will not launch either from the desktop or program list. The only way to launch is to log out and restart the computer. At the end of each session I reset the preferences in the Workspace.  I am running Win 7 ultimate with 4GB of ram. System is 64 bit .  Display is ATI Radeon HD  5700 series. Adapter type is AMD Radeon Graphics Processor (0x68B8). The computer has an Intel(R) series/3400 Chipset Family.
    When I installed from the disk I received the message  Exit Code 6, 0 fatal errors, 21 errors, 1 warning. I have reinstalled several times and still get the same message. Tried disabling start up items while installing but same message.

    One thing that sort of jumps out at me, regarding running the program, is that 4GB of RAM. With a 64-bit OS, 4GB is just about the minimum to run the OS, with little to nothing left over for a program, like Photoshop. I would bump that up, and to 12 - 16GB, if possible.
    For the installation, I think that Mylenimum has posted some very useful links.
    Good luck,
    Hunt

  • CS5 will not open after upgrading to Yosemite

    CS5 will not open after upgrading to Yosemite

    Hi Clickchris,
    CS5 Photoshop is supported on Mac OS 10.5.7 and 10.6.
    It has not been tested on Yosemite as it is a very old version of the product.
    Please refer to below document.
    http://helpx.adobe.com/photoshop/system-requirements.html#main_Photoshop_CS5_system_requir ements
    Thank you for posting on Adobe Forums.

  • Firefox will not start, after reboot.

    For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
    == This happened ==
    A few times a week
    == Around the time 3.5 was released

    Hello Tom.
    You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Photoshop CS4 will not launch after installing Yosemite.

    Photoshop CS4 will not launch after installing Yosemite. All the other CS4 apps open. I upgraded Java. Genius Bar could not get it to launch.

    Here's the fix I found, by way of an explanation...
    Snow Leopard prompted me on my first startup with the following error:
    "There is a conflict with the _______ font file. This font file contains a font name that conflicts with a system font required by Mac OS X to display onscreen text. You should move this font file to the Trash."
    The fonts it said were conflicting: Helvetica, HelveticaNeue.dfont, Lucida Grande, and Monaco. I figured Snow Leopard probably wanted to replace these fonts with newer versions, and so I clicked "Move to Trash" on all four.
    Apparently 10.6 trashed these fonts but didn't replace them. This was causing Photoshop to crash on load.
    So I restored my ~/Library/Fonts folder from a backup made just before upgrading and this time after a reboot I said "Allow Conflict" on all four dialog boxes and launched Photoshop... everything is back to normal!
    Not sure what kind of "conflict" it's referring to, but apparently moving these font files to the trash as OS X prompted me to do broke a number of apps. Should I report this as a bug?
    Thanks for the ideas!

  • Photoshop CS4 will not Start

    Hi, i'm usually quite responsible when it comes to making sure my system can coap with what i am asking of it, but i've ran into a problem that my computer just can't seem to get around, and means that photoshop cs4 will not start up.
    I've been making .PAT files from a few pattern sourcebooks i've recently brought. The first two went fine, but a japanese sourcebook contained 250 reasonably hi-res pattern images which i put through an automated action which set them all as patterns for me for the Pattern Overlay option in beldning options. When i did this i noticed my computer started to slow down near the end of the process, so i saved out the .PAT file from them, and quit photoshop to free up over 2.10GB worth of data. I have 4GB on a 32bit XP, but only 2 and a half-ish is seen by windows due to the hardware installed aswell. Of course i plan to chnage this to 64bit soon, but anyway, when photoshop now is told to start up, it reads everything normally, then gets to "Reading Preferences", and crashes with an error report, which watching my task manager, i belive to be linked to memory shortage from having to load the patterns up.
    I reset my preferences to see if it would set them all back to default and not read the added pattern files, but that made no difference. Any ideas?
    Thanks in advance!!

    I'd look into doing a couple of tests:
    1.) Move those PAT files elsewhere
    2.) Eliminate all programs and Processes, that are unnecessary. Task Manager>Processes will give you a list of all that load, and you can probably stop half of them with no ill effects. I'd use MSCONFIG, so you can go back and easily activate them later.
    3.) Reboot and see what happens.
    Note: John's suggestion on the Presets folder might address #1, but I'd also physically Move them. It sounds like you're running totally out of resources to run PS, so Textures, and such, might be an issue too.
    A question: how are your Scratch Disks setup and please tell us about your I/O sub-system, i.e. the internal HDD's, their size, free space, speed, controller type and how these internal HDD's are allocated. Especially tell us if you have any physical HDD's partitioned.
    Good luck,
    Hunt

  • SLD will not start after I upgraded Netweaver 2004s Portal

    SLD will not start after I upgraded Netweaver 2004s Portal from SP 14 to SP 15.
    It gives me the following J2EE error:
    Application error occurred during request processing.
      Details:   java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
    Exception id: [00145E336A6A00680000002A000003480004502001E11FF0]

    Hi ,
    as a first question: What versions of WAS / NWDS are you using?! (Main question is if you are using corresponding versions, i.e. NWDS 2.0.x with WAS 6.40 SP x, with the same value for x.)
    See the threads below for more information
    NetWeaver 2004s upgradation problems
    Could not run WebDynpro Tutorial - NoClassDefFoundError
    Points are welcome if it is useful
    Koti Reddy

  • Photoshop CS5 will not shutdown

    Actually, none of my CS5 apps will shutdown without Force Quit. What gives? Why all the issues?

    Do you mean the console log?
    Markus Beaumonte
    <<personal information removed>>
    From: Chris Cox <[email protected]>
    Date: Sat, 05 Jun 2010 12:38:58 -0600
    To: Markus Beaumonte <markus>
    Subject: Photoshop Macintosh Photoshop CS5 will not shutdown
    markus - could you email that file to ccox (at) adobe  com ?
    We need to look at the whole log, and forward it to the ServiceManager team.
    I think Steve can also walk you through steps to solve the issue on your
    system.
    (caused by an installer bug which corrupted permissions, plus another bug in
    ServiceManager)

  • My photoshop cs5 will not recognize raw photos from my canon eos 70d

    my photoshop cs5 will not recognize raw photos from my canon eos 70d

    No.  DNG is a RAW format.  There are a few small manufacturer specific items that are left out when converted to RAW (for example, Nikon's Active D lighting) that aren't maintained, as well as some Meta data and focus points, etc.  Personally I never noticed the difference, but perhaps some do.  There is no impact to the image quality, you have just as much post production freedom with DNG.
    I did it for a couple years before upgrading to CS6.  It's an extra step, but you get used to it and it's not a huge deal.  I would put my card in my reader, and download to a temp file.  While that downloaded I would go to the fridge and grab a beer [Edit - you can substitute the beverage of your choice ].  Then I would run the RAW to DNG converter, and drink my beer.  It was usually done before my beer (if not I got another).  I saved the CR2 files as a backup at first, but once I got comfortable trusting DNG I stopped doing that.
    Another option is to get Lightroom and use that for your developing.  You can then send over a TIFF file with the edits.  But in this situation you couldn't send the image over as a smart object (I think, I assume this would use ACR?).

  • I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

    I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
    Thank you.
    Brian in the UK.

    Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

  • TS3297 Just rented a movie in French on my iMac... movie will not start after download ?

    Just rented a movie in French on my iMac... movie will not start after download ?
    What I do now ?

    Okay. I'd report the problem to the iTunes Store. 
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Maybe you are looking for