Photoshop CS6 creates too many History States withing 1 stroke

I'm on MAC OSX 10.6.8, Photoshop CS6, using a Wacom Cintiq 12".
Too often Photoshop remembers way too many History states within one pen stroke. In previous versions I don't remember this behaviour. Previously, each stroke, no matter how long, was registered as only one History state, until I raised the pen from the tablet. Now, totally sporadically without any obvious rule, Photoshop decides to remember even 100 history states within only one stroke.
Although this is sometimes useful, if you work on really long strokes, but mostly it's highly disturbing, as after using just one tool to paint only one little circle, I loose all my other, much more important History states.
Can somebody explain to me why???

Noel Carboni wrote:
Done with a mouse I get exactly one "Brush Tool" state in the history and one "Use brush" state recorded in an action.
Could it be that your tablet driver is actually delivering information to Photoshop that makes it think you're lifting the stylus and putting it down many times per stroke?
-Noel
Hmmm... could be, but I don't know how to test it, as it happens occasionally... I don't experience it in other software, but I will keep an eye on that.

Similar Messages

Portal creates too many database sessions. fix doesn't work!!

Oracle Database 9i, Application Server 9iAS,
Operating System SUSE Linux 7.2
CPU - Athlon 1400
Ram - 1GB
There is a modification for the http server that aims to eliminate a problem on unix that causes the database to create too many sessions. The script can be found at
http://portalstudio.oracle.com/servlet/page?_pageid=1787&_dad=ops&_schema=OPSTUDIO
However the script fails to work. The http server is on port 80 with the redirect on port 7778. However going to http://myhost/pls/ results in a server error - connection refused. Is it possible that there may be an error in the script.
Thanks in anticipation

ok so my sound is ok now I can check that off of the list... I just looked around and found some external USB speakers that work just right. My built in computer speakers are just not the best quality.
As for the microphone, I still haven't been able to find out what is causing it to not work. I notice that it isn't actually broken since if I make a really loud noise right next to the input it will register a little but only a little bit.
$ arecord -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=Intel
HDA Intel, ALC269 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC269 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
$
here is some additional information about my sound. Also, when I open alsamixer, I find that when I go to "select sound card"(F6) I see default and HDA Intel. If the default is pulseaudio, then is it possible that pulseaudio is causing the problem?

CHECK/EXIT contains too many ABAP statements

Hi all,
I am working in BADI MIGO. I have included few INCLUDE program in it which is throwing the following error while activating it. Please let me know if any one have come across it.
<b>Jump is too great and cannot be generated... A control structure or routine with CHECK / EXIT contains too many ABAP statements....</b>
Waiting for your reply,
Thanks,
Venki

Same error for me.
I have to call a larger macro 60 times and so I can't activate the function module. If I call the macro only 50 times it works fine.
Any idea how to solve that without a complete redesign of the code (packing the macro into a new fuction module)
Thanks,
Christian

Will Analyze create too many redo logs ??

DB : 10gR2
Hello Folks,
Is analyze process creates too many redo log files ?? Is their any other valid option other than no log ?

I guess that's also going to create too many log switches as it's part of DDLHUH?
REDO log switches result from DML.
If you are obsessed with LOG switches, then you need to use LOGMINER to observe the the relative per centage of changed data is from DBMS_STATS
when compared to normal DML activity.
I seriously doubt that DBMS_STATS has any significant impact to redo log switches.

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. Help

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
I am running a 64 bit version of Photoshop from the CS6 Masters Collection
I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
The document size is 2100 by 1500 Pixels at 300 PPI only two layers

In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
I am running a 64 bit version of Photoshop from the CS6 Masters Collection
I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
The document size is 2100 by 1500 Pixels at 300 PPI only two layers

I've used up several gift cards playing games on my iPad. Now I want to put back in my main credit card that I use playing games and it won't take it. Says there are too many cards associated with this apple ID. I have no idea what to do now -- anybody?

I've used up several gift cards playing games on my iPad. Now I want to put back in my main credit card that I use playing games and it won't take it. Says there are too many cards associated with this apple ID. I have no idea what to do now -- anybody?

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

How I can load images from Creative Cloud storage in photoshop plugin, created in Extension Builder 3 with use html5/css/js?

How I can load images from Creative Cloud storage in photoshop plugin, created in Extension Builder 3 with use html5/css/js ?

At this point there is no API for accessing the cloud storage outside Adobe's own closed loop.
Mylenium

Photoshop CS6 create permissions OS X

Hi there,
this issue is discussed for OS X Server but i didn't find something for my situation, where files are stored locally and different users ON THE SAME MACHINE want to work on these files: a Mac Pro running Mountain Lion is set up for 2 users (both members of group 'staff') who are both creating new files in Photoshop CS6. So far i found out that Photoshop writes new files with limited ownership and permissions: owner is the user creating the file, group is set to the ID of this specific user. Permissions are set to -rw-rw----. ACL inheritance of the folder where the file is created in is ignored.
This is what Terminal ls -le shows for the folder 'TEST' itself i am saving into as user 'foto':
drwxrwx---+ 4 foto staff 136 16 Mai 15:39 TEST
0: group:staff inherited allow list,add_file,search,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeex tattr,readsecurity,file_inherit,directory_inherit
These are the permissions set for a file 'Testfile-1.jpg' created in folder 'TEST' using Photoshop:
-rw-rw---- 1 foto 502 36608 16 Mai 13:03 Testfile-1.jpg
QUESTION: Is there an AUTOMATED way to at least have group ownership 'staff' for these files? At the moment i am forced to do this manually (Terminal chown, chmod) every time the user is changed, what happens quite often. As we work with files in many different folders assigning Folder Scripts wouldn't be practical too (Folder Scripts are not recursive and have to be assigned to every single folder). A Chron job might be a solution, but i am not sure if i understand the principle right - it can be triggered every hour?
Any suggestion or link is highly appreciated, thanks Achim

Your user account was migrated from an early version of OS X and needs to be modified slightly.
Open the Users & Groups preference pane in System Preferences. If the lock icon is closed, click it and authenticate with your administrator name and password.
Right-click or control-click the entry for your account in the user list, and select Advanced Options... from the popup menu. In the sheet that opens, change the value of Group to "staff". Click OK to save your changes, then close System Preferences.

Photoshop CS6 create permissions

Hi there,
this issue is discussed for OS X Server but i didn't find something for my situation, where files are stored locally and different users ON THE SAME MACHINE want to work on these files: a Mac Pro running Mountain Lion is set up for 2 users (both members of group 'staff') who are both creating new files in Photoshop CS6. So far i found out that Photoshop writes new files with limited ownership and permissions: owner is the user creating the file, group is set to the ID of this specific user. Permissions are set to -rw-rw----. ACL inheritance of the folder where the file is created in is ignored.
This is what Terminal ls -le shows for the folder 'TEST' itself i am saving into as user 'foto':
drwxrwx---+ 4 foto staff 136 16 Mai 15:39 TEST
0: group:staff inherited allow list,add_file,search,add_subdirectory,delete_child,readattr,writeattr,readextat tr,writeextattr,readsecurity,file_inherit,directory_inherit
These are the permissions set for a file 'Testfile-1.jpg' created in folder 'TEST' using Photoshop:
-rw-rw---- 1 foto 502 36608 16 Mai 13:03 Testfile-1.jpg
QUESTION: Is there an AUTOMATED way to at least have group ownership 'staff' for these files? At the moment i am forced to do this manually (Terminal chown, chmod) every time the user is changed, what happens quite often. As we work with files in many different folders assigning Folder Scripts wouldn't be practical too (Folder Scripts are not recursive and have to be assigned to every single folder). A Chron job might be a solution, but i am not sure if i understand the principle right - it can be triggered every hour?
Any suggestion or link is highly appreciated, thanks Achim

Your user account was migrated from an early version of OS X and needs to be modified slightly.
Open the Users & Groups preference pane in System Preferences. If the lock icon is closed, click it and authenticate with your administrator name and password.
Right-click or control-click the entry for your account in the user list, and select Advanced Options... from the popup menu. In the sheet that opens, change the value of Group to "staff". Click OK to save your changes, then close System Preferences.

Photoshop CS6 creates new layers when cropping

when I crop my image CS6 is now creating a layer. If I check history, there is no sign that a layer was created, just cropped, however if I check under Layer, "Flatten Image" is highlighted. How do i get rid of this, just started today.

Rufous03,
Is Layer 0 the only layer you see in Layers panel after you crop the image or is there still a 'Background' layer under Layer 0?
In Photoshop CS6, the Crop tool has been refined. There is an option that enables you 'not' to delete cropped pixels when you crop - meaning your image data is not lost - you can go back to the original version at anytime. With this feature enabled (by default, it is - look in the menu bar on top - 'Delete Cropped Pixels' will be unchecked), your 'Background' layer of the image is simply 'Unlocked', therefore leading to 'rename' of layer as 'Layer 0'.
If you enable 'Delete cropped pixels' option, it will simply get rid of the pixel data that you're cropping out and your layer will remain as 'Background'.
Trust this helps.
-ST

Photoshop CS6 - Screen flickering when using brushes with new MacAir 2013

Would the Adobe team please respond to the issues reported by several users:
http://forums.adobe.com/message/5449199
A number of users experience severe screen flicker in Photoshop CS6 when using any of the larger brush type tools (cloning, eraser, brush, spot healing, burning, and dodging). As many on this thread are experiencing, it is awfull and unusable! The flicker is screen wide black boxes, sometimes the whole screen goes black. It only seems to happen when we put the cursor over the image to edit.
Hardware: MacBook Air 13", Haswell 1.7 GHz, 8GB, 512 SSD Software:
Photoshop CS6 v13.1.2 20130105.r.224, OS X v10.8.4 (and perhaps others)
Looks like a CS6 is not compatible with teh new MacAir. Please look into this and advise.
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64 Operating System: Mac OS 10.8.4 System architecture: Intel CPU Family:6, Model:69, Stepping:1 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Message was edited by: GSVAI

An update:
I went to the Apple store and brought myself a more recent MacBook Air (13", 4/256 FYI, they were out of the 8/512 model). I can't reproduce *exactly* what you're showing, but got the flicker to happen by resizing the cursor. Also, while painting, the screen seems to stop updating except for the cursor -- not only is Photoshop unable to draw, but other applications stop drawing as well. And a few times it hasn't even updated the cursor (while all other apps seem frozen). That's not normal.
When I see the flickering, I frequently see the menubar and other UI elements draw at the wrong location on the LCD, then black, then redraw in the correct location -- repeat in different positions and lots of "static" until I stop changing the cursor. That's more evidence of a hardware or and odd driver issue. The odd thing is: it doesn't happen all the time. It's possible that the one we have at the office also shows the problem, but we didn't test long enough.
I'm trying to reach out to my hardware contacts at Apple - but it's a weekend before a holiday, so we may not make progress immediately.
One thing that would be useful here: the model of MacBook Air that you have that shows (or doesn't show) the problem.

Photoshop CS6 (Mac) crashes when opening files with type or using the type tool

Hi,
Photoshop CS6 keeps crashing when using the type tool or when opening files with type on it. I've quit suitcase, disabled the suitcase plug-in, reset the preferences in Photoshop there's no crash report coming up either the application just dies! I am currently trying a system restore from time machine to see if that works!. Any other suggestions would be greatly appreciated.
Many thanks
Olly

http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html

Creat too many instance when writing an oracle database

Hi
I want to write Oracle database with database toolkits;
but..i found there are too many instance or called session（exceed the upper limit) created when the program running . that makes the Orace server stop responding
Is there anything i need to modify？
Attachments:
Oracle DB.vi ‏36 KB

Frankly I have never seen this problem, but then I make a point of never using the database connectivity toolkit. Assuming a Windows platform, Windows implements something called connection pooling so when you "close" a connection the OS inserts it into a pool so If you ask for another connection it doesn't actually open a new one it just gives you back a reference to one of the ones you "closed" before.
What OS are you running on?
What version of Oracle?
Is the instance of Oracle local or on another computer?
How are you communicating with Oracle (odbc, oledb, etc)?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Photoshop CS6 keeps freezing when I work with large files

I've had problems with Photoshop CS6 freezing on me and giving me RAM and Scratch Disk alerts/warnings ever since I upgraded to Windows 8. This usually only happens when I work with large files, however once I work with a large file, I can't seem to work with any file at all that day. Today however I have received my first error in which Photoshop says that it has stopped working. I thought that if I post this event info about the error, it might be of some help to someone to try to help me. The log info is as follows:
General info
Faulting application name: Photoshop.exe, version: 13.1.2.0, time stamp: 0x50e86403
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988950
Exception code: 0xe06d7363
Fault offset: 0x00014b32
Faulting process id: 0x1834
Faulting application start time: 0x01ce6664ee6acc59
Faulting application path: C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\Photoshop.exe
Faulting module path: C:\Windows\SYSTEM32\KERNELBASE.dll
Report Id: 2e5de768-d259-11e2-be86-742f68828cd0
Faulting package full name:
Faulting package-relative application ID:
I really hope to hear from someone soon, my job requires me to work with Photoshop every day and I run into errors and bugs almost constantly and all of the help I've received so far from people in my office doesn't seem to make much difference at all. I'll be checking in regularly, so if you need any further details or need me to elaborate on anything, I should be able to get back to you fairly quickly.
Thank you.

Here you go Conroy. These are probably a mess after various attempts at getting help.

ORA-30678: too many open connections with UTL_MAIL.send

I'm have just recently started getting the ORA-30678: too many open connections error while calling the UTL_MAIL.send procedure to send emails via a pl/sql package. The call is made within a loop and there can be a significant number of calls made to this procedure. In fact, I received this error over 1400 times within the last three days. This was previously working until I made a change to the processing which now results in a larger number of emails/calls to this procedure. I don't see any documentation on how (or if) I can close the connection with UTL_MAIL.
I'm using Oracle 11g. Any insight would be much appreciated.
Thanks,
Teri

Looks like a bug possibly, check out this MOS Note:
Ora-30678: Too Many Open Connections From UTL_MAIL [ID 788442.1]
The bug note says it was fixed in 11.2. Not sure which version of 11 you are running.
Edited by: Centinul on Apr 26, 2010 2:07 PM

Photoshop CS6 creates too many History States withing 1 stroke

Similar Messages

Maybe you are looking for