Photoshop CS6 iPhone video editing

Photoshop CS6 has video editing but can not render any video from iPhone 5

The format is .mov.
When you render it it becomes .mp4.
I do this all day that is the compression understood by many players. I did not say that it does not support the format as it will play fine. I said "it will not render" No corverter needed.
The video from the phone will not render unless you use the Apple TV, iPhone, iPad 4 and newer -720p 29.97 setting instead of the HD1080p that I use normally.
I hope you know how to help me. Please do not give me general answers be specific or tell me "I do not know"
You can always try it at home!
Thanks for your time

Similar Messages

I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?

In 2012, I bought Photoshop CS6 Extended (education edition) for Mac. Now I want to install it on my new Macbook. I have the correct serial number and product code, but I receive an error message: the software may be a false copy etc....What to do?

Here is a copy of the error
This means : Installation failed.
Verification of the Adobe Software failed
The product you want to install is no valid Adobe product and seems to be falsified.
HUgo
Op 29-aug.-2014, om 23:42 heeft Jeff A Wright <[email protected]> het volgende geschreven:
I bought Photoshop CS6 Extended(education edition) for Mac. Now ik want to install it on my (new) macbook. I have the product code and serial number. I receive an error code: may be a false copy. How can I install this program?
created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
Hugo please turn off your e-mail signature.
If your serial number is listed as being valid at http://www.adobe.com/ then I would recommend obtaining a fresh copy of the installation files. You can find details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
To download a fresh copy of the installation files please see Download CS6 products.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6685617#6685617
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Photoshop CS6 Teacher Student Edition (Permanent License)

This might sound a bit silly question but I need to hear from you who knows better. Is Photoshop CS6 Teacher Student Edition (Permanent License) NOT the CC Edition is a CD-ROM. I mean a regular CD that contains the program and I can install it on my IMac?
Thanks

Well, this is a nitpick, but a CD can only hold 600 MB. Photoshop is way larger than and is supplied on a DVD.
Just by looking on Amazon,you may get it as a boxed item (DVD) or as a download. Adobe offers it as a download.
https://store1.adobe.com/cfusion/store/html/index.cfm?event=displayProduct&categoryOID=725 3698&store=OLS-EDU
More importantly register your software with Adobe. Your serial number will be stored under your account. How many times have people come into this forum and started with, "I replaced my 5 year old rusty PC, and can't figure out what happened to my serial number...HELP!!"
Gene

Security Update 2013-003 kills Photoshop CS6 with video

Since updating 10.6.8 to Security Update 2013-003, Photoshop CS6's video capabilities are hosed. If I try to export a video to animated GIF, it pinwheels. If I import a video in the first place, it now takes much longer to do so. Making layers from video frames now gets stuck at the Progress bar and I'm forced to cancel it and/or force quit Photoshop.
Just a warning to those who work with video and Photoshop, Security Update 2013-003 may ruin your workflow.

If you have not already done so, you should contact Adobe Support and/or post in the Adobe Forums since it's their product for a work-a-round if any.

Do I have to upgrade to Photoshop CS6 Extended to edit videos?

I was looking at a video editing tutorial for CS6 yesterday and I wanted to try it myself, but when I opened the timeline I noticed that my version of the timeline and the one in the video were completely different. At first I thought that it was just because I had to upgrade to CS6 Extended to get the full video editing experience, but when I searched around I saw nothing that would suggest that that would be the case. Multiple people said that the regular CS6 version included the same video editing capabilities as the extended version, and the comparison chart on the Adobe website indicated the same thing. Am I missing something very simple or do I really need to upgrade to the Extended version to get that feature?
This is what my timeline looks like:
http://i.imgur.com/T0CTiOm.jpg

JoshHPM wrote:
How do I switch between the two? I don't have the 'Create Frame Animation' box in the center of the timeline.
You need an open document before you'll see the button for choosing video or frame animation.
I also just noticed that the timelines that you had in your screencap look completely different from mine. The options are at the top rather than the bottom and the icons themselves look different. It's like we're using two different versions.
JJ's image of Timeline panels shows both types of timeline: video with transport controls at top and frame animation with transport controls at bottom.

Photoshop CS6 export video to MOV format

I have a few MOV format videos that I need to rotate and re-save with PS CS6. I've never tried video editing with Photoshop, and this must be the most basic of basic starts in my next career as a film producer. I assume I just go to Image > Image Rotation as one does with image files? Then when I export the video, and select QuickTime MOV format, the resulting file does not actually have any video in it -- only audio. And despite having no video apparently, the file size is huuuge.
So what gives? Am I doing something wrong? I have QuickTime viewer installed, but do not have a licence for QuickTime full version. Is that it?
Shall I just export to mp4 and be done with it? I would prefer to be consistent... so that I have all MOV files (I won't have to rotate / edit all video files, only some).
Thanks,
Mike

I have QuickTime viewer installed, but do not have a licence for QuickTime full version. Is that it?
Apple has two QuickTime products - QT Player (free), and QT Pro (~ US $29). The installation is for both versions, but with the Pro purchase, you can unlock some additional features, like the ability to do rudimentary editing, and more Export options. I have been told that the Pro version has some additional CODEC's, that are unlocked, but I have my suspicions. However, as I have had the Pro versions on all computers from about 7.1, I cannot even check that out.
Historically, if one has purchased Pro, and used the unlock feature with the S/N, then all point upgrades carry though, so if you had 7.5.5 Pro, and updated that to 7.8, you would still have Pro. Again historically, if they went to version 8, then one would need to purchase another Pro license. Not sure how this will work, when the version 8 does hit for the PC. We will just have to wait and see.
Now, the QT Animation CODEC is a good one, that should work (files WILL be large), and that is what I receive from my contract 3D artists, to use in my Premiere Pro Projects. I would think that should work fine, but you are having issues. As a test, try the PNG (might be called Photo PNG?), and see if you do get your Video. That is also a good choice of CODEC.
Good luck,
Hunt

Lightroom won't open photoshop CS6.. Edit in Photoshop doesn't work

Lightrrom 4.2 can't use the right click, "edit in" photoshop CS6. I have tried edit, preferences, and created a Preset and pointed it to the CS6 photoshop.exe... still a no-go. Help!!!

I had this problem. You must run Lightroom as administrator - even if the account you are in has administrator priviliges.
Test if this is the problem you are having by opening lightroom in administrator mode:
Open Windows explorer and navigate to where the lightroom.exe file is located.
Usualy in C:\Program Files\Adobe\Adobe Photoshop Lightroom 4.4
Right click on lightroom.exe and select "Run as administrator" from the pop up menu.
Test by selecting a photo and selecting the "Edit in Adobe photoshop CS6" option.
If this works then close lightroom and go back to the "lightroom.exe" folder location,
rightclick on the lightroom.exe file but select "properties", then select the "compatibility" tab and
select "change settings for all users" button.
A box called compatibility for all users should appear, at the bottom there is a checkbox "privilige level"
make sure the "run this program as administrator is checked".
Close lightroom and reopen it.
Hope this helps.

Lightroom 3 and Photoshop CS6 problem when editing

Hi,
I have just upgraded to Photoshop CS6 and now when I 'edit in Photoshop CS6' from lightroom and save it, the image doesn't appear next to the original RAW file as it did before. Now lightroom creates its own folder with the edited files in.
For example, I edited a RAW file from a folder called Bissoe valley from Lightroom and saved it. When I go back to Lightroom the edited image is not next to the original file but in a seperate folder called 'Bissoe valley'. I then try to drag the edited image back into the original 'Bissoe valley folder with the original RAW file and it says 'the file already exists at the destination'
I appologise if this has already been asked. I'm guessing I need to buy Lightroom 4 because of incompatibility issues? It wouldn't surprise me if this is the case.
Thanks in advance for any help.

Victoria....you are a legend!
You can see here lightroom has created folders identically named to the folder which the original files belong to (coco, Harriet, Bissoe and independent assignment)
The really confusing part is that when I look in the original folder outside of Lightroom, the saved Tiff image is there next to the original.
I think I will try uninstalling ps cs6 and go back to cs5 to see if it solves the problem and take it from there....

Photoshop CS6 - transfer video .psd to another pc

Hello all,
I am new to the community and hope that someone can help me out. I have been doing a video timeline project for a college course using Photoshop CS6. I have my file saved and updated on my laptop. I attempted to transfer this file to another computer to continue working on it, but unfortunately when I open it on the other computer it only loads one frame and does not load the timeline. I have ensured that all files are present in their original location but the problem persists.
Any ideas as to if there is a step I am missing when I save my file on the original PC?

Nah. You are missing some CoDec or the system isn't up to snuff to provide hardware acceleration for video playback and only shows the poster frame as it is saved in the file. Since you have not provided any relevant technical info, we can't know anything beyond that.
Mylenium

My licensed Photoshop CS6 (extended Education Edition) does not boot, I only get link to join cloud?

When I try and boot my licensed Ed Edition CS6 extended software I just get an ad link to join the cloud?
What is going on?

Hi PJ,
You're correct, when you get a membership to Photoshop CS6 by itself it is the standard version, versus with Creative Cloud membership it is the Extended version. I didn't find this written out anywhere. I did notice when I clicked the Photoshop picture from here http://www.adobe.com/products/creativesuite/cssubscription.html it took me to the Photoshop standard product page versus here it does say Extended http://www.adobe.com/products/creativecloud/tools.html and links to the Extended product page.
Where are you seeing this "Learn More" link that takes you to the wrong place (Extended page)? Can you post a screen shot?
This seems like something that should be called out on the first subscription page and here http://www.adobe.com/products/photoshop/faq.html#subscriptions
I'll see if its possible to get something added and possibly change this Learn More link once I get more info.
-Dave

HOW TO ACTIVATE PHOTOSHOP CS6 MAC (CD EDITION) ?

so I've bought a Mac Version of Adobe Photoshop cs6 but can't active it
I've installed it and it then at 100% spits the disc out and no photoshop appears so I've reloaded it but it just goes back to the installing screen
how do i activate a cd version through live

Hi Station, and Merry Christmas. I somehow don't expect him to know the fine points (CD 600 MB/DVD 4.7GB typical), but to get the optical media out of the equation, I just got him over to the downloadable installer.
If his serial is valid, it's a go and he is in business.
If not and the serial number fails, he gets his money back (maybe) and learns about counterfeits.

Photoshop CS6 Extended Video Project Help

Ok here is the setup. PS CS6 Ext. Bringing still images into the time line for a video project. Images default to 5 seconds in length. Is there any way to batch change that to like 2 seconds without going through and shortening every image manually? That would be very time consuming with a large amount of images.

Not sure that you can batch process the Duration, after the Stills are on the Timeline.
There should be a Preferences setting, like in Premiere Pro (Adobe's full-featured NLE, Non Linear Editing program). There, you can set the Default Still Duration.
In PrPro, after CS 4, even after the Stills have been Imported into the Project (but before they are dragged to the Timeline), one can select multiple Stills in the Project Panel, and change their Duration en masse. Before then, one had to just Delete the Imported Stills, change the Default Still Duration, and Import the Stills all over - or manually adjust the Duration of each on the Timeline.
Good luck, and hope that PS-Extended has the same controls.
Hunt

Photoshop CS6 (extended) Video card minimum requirements.

Can you tell me if my video card is adequate for using the 3D feature in CS6 Extended? The 3D tools don't seem to work. I get the message below. Do I need an updated video card or driver? Let me know if you need more information. Thank You.

The CS6 Minimum requirements are here. http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-photoshop.html
You need at least 512 MB of video ram to use 3D.
You go to Photoshop's Help Menu and select System Info. I copied and pasted my video card info and as you can see I don't have enough video ram for 3D and it's dimmed out. No driver update will help.
OpenGL Version: 2.1
Video Rect Texture Size: 8192
OpenGL Memory: 237 MB
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: NVIDIA GeForce 9400M OpenGL Engine

Where can I find details about video editing in CS6?

It looks like CS6 treats video adjustments almost like layers, but the screen interface does not really show whether that is so. Is it? Also, I am curious what default file format is being used by the File Save As dialogue where video is concerned. It only shows a PSD format but the saved file seems to act like the original MOV file. And the MOV format is not actually offered as an option. Can I get more details about these issues? BTW there are some great new features!

Some tutorials can be found here:
http://iceflowstudios.com/2012/tutorials/photoshop-cs6-beta-video-editing/
http://www.lynda.com/Photoshop-tutorials/Photoshop-CS6-Beta-Preview/97406-2C.html
http://www.photoshopuser.com/cs6

Edit in Photoshop CS6 (version 13.0.1 x64) from Lightroom 5.2

I have an image in Lightroom 5 where I have not made any adjustments and I want to Edit In Photoshop CS 6, When I go to Photo>Edit In> Edit In Adobe Photoshop CS6, Photoshop opens without first displaying the "Edit Photo with Adobe Photoshop CS6 What to Edit" dialog.
However, if I make any adjustments to an image in the Develop module in Lightroom 5 and the choose to go to Photo>Edit In> Edit In Adobe Photoshop CS6, nothing happens. The "Edit Photo with Adobe Photoshop CS6 What to Edit" dialog does not appear and Photoshop CS6 does not open.
Can anyone help me correct this problem?
Here is an image of the dialog that should appear.

DAllenJ2215 wrote:
Bottom line I want to thank you ever so much for hanging in there and guiding me through this issue to a good and knowledge driven and successful conclusion. In order to mark this thread as "Answered", which of your replies should be marked to that effect. There is no question in my mind that you deserve full credit for bringing about a successful resolution of the issue so tell me which one to mark and I will do so.
Glad I was able to help you find the solution. You actually discovered the issue so I'd check your post #20 as the' Correct Answer' and my post #17 as 'Helpful.'
I've been into photography since the early 1970s and have a boatload of Olympus OM Series bodies, lenses and accessories. I haven't shot a roll of film in about 10-years, but I've been scanning my old slides and negatives using both a Plustek 7600i film scanner and Canon 9000F flatbed scanner. I do my initial capture, cropping, and spot removal using PS and then generally everything else inside LR. I used to do everything in PS, but LR is faster and allows keywording, etc. all-in-one application. I also use Bridge to organize and locate all of my project assets, since it allows keywording and creating collections using all file types, including, pictures, videos, music, PDFs, InDesign and other Adobe application files. Keywording works fine Bridge>LR>Bridge.
DAllenJ2215 wrote:
Up until the time I received your message I had not changed the profile names in the DNG ProfileManager. I just now changed the name on the original profile, and yes it now works with the EDIT-In command. What I would like to do is delete the second and third profiles I created from the original image but I haven't been able to figure out how to do it.
The easiest way to do this is from inside the DNG ProfileManager. Highlight the files you want to delete and then go to File>Delete. If you make a mistake simply go to the recycle bin, restore the file(s), and inside DNG Profile Manager select File> Reload Profiles.
WARNING: This will cause all files that have been assigned the profile to revert to Adobe Standard profile.
I learned this the hard way! If you want to delete a currently used profile and replace it with another, you must keep the exact same name! You can also change the profile on all images assigned to it by using AnyFilter> Color Profile = 'PROFILE NAME.' Then Sync the new profile across the images. Once complete you can then delete the old profile.
Don't forget to adjust your White Balance settings, which may be different for each camera profile and in some cases each image (i.e. different lighting condition).
Happy LRing!
Message was edited by: trshaner Added WB info.

Photoshop CS6 iPhone video editing

Similar Messages

Maybe you are looking for