Photoshop CS6 is downloaded even though the link states Photoshop CS6 Extended.

Hello!
A few days ago or so, I had downloaded Photoshop CS6 from the official Adobe site here (http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop), and wanted to only test it out. However, I did a very stupid thing and uninstalled all my Microsoft Visual C++ products, not knowing that these were important for Photoshop. Anyways, Photoshop was having all errors etc. and I had to uninstall it (the 30 days weren't over yet, by the way). Now I have downloaded the Microsoft C++ products again, and I wanted to download Photoshop CS6 Extended again - it all was installed it perfectly, but when I opened the program, it was just Photoshop CS6 and not Photoshop CS6 Extended (and I want it because of the 3D options etc.) - and I was using the same download link from above. So, why has it downloaded the "wrong" product now?
Thanks!

The installation is one and the same software, only a serial number differentiates the feature set.
It's not supposed to be able to show you just non-Extended features in evaluation mode, however. I don't honestly know what to advise, other than maybe to do a full and complete removal, including use of Adobe's Creative Suite Cleaner Tool, then install it yet again. Perhaps trying to run it in a damaged state triggered some of the GPU detection logic to fail and deconfigure Photoshop's use of the GPU.
Since it is allowing you to continue your evaluation period, there's hope.
Creative Suite Cleaner Tool: http://www.adobe.com/support/contact/cscleanertool.html
-Noel

Similar Messages

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

After upgrading to 3.6.8 none of the plugins load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log.

After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
== This happened ==
Every time Firefox opened
== Upgrading to newer Firefox version (3.6.8)

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

BIDS 2008 DataFlow viewer not showing even though the sql statement returns data

Have a dataflow and trying to see why no rows are being written to the destination. I popped a viewer on the connection, but it doesnt show up when I run. What can I check?
The DataFlow source runs a sql statement and it runs fine and returns a result.

Why would that be if I can execute the sql statement that is being used in the OLEDB Source, and I get a result, yet the destination gets no rows afterwards. Even executing the Dataflow task by itself, no rows are written.
I do have a script task that modifies the connection before the dataflow, but this was working fine yesterday :)
Even so, if there was a problem with the connection, I would get an error. There no no errors, it just sees no rows and the dataviewer is never displayed.
What the heck can I check?

Why does Bridge open raw files (ndg) in Raw window even though the 'Open in Photoshop' option is...

I don't understand why in Bridge there are 2 choices, -1- Open raw and -2- Open in Photoshop and yet both choices give you the same result--The raw window opens with PS below it. After having worked on my raw NEF files I save it to dng. My thinking behind this, is that I alreay have done what was needed and would now like to start working on it within Photoshop. It seems that the only way to automatically open it directly within PS is if I save it as a tiff, psd or jpg. But since this is not what I want to do then why must I add extra steps as opposed to just opening it hwere I want. I mean the 2 choices are there, so why not do what it is being asked?

If I may step in in this discussion, I always use DNG but never have used ACR to achieve this result.
As Curt stated the changes made in ACR to a Raw file (or for that matter a DNG file) are undoable without problems.
My workflow (using Canon CR2 but that is not important, let's say a dSLR generated Raw File) is to use Photodownloader in Bridge (not perfect by far but still the best and easiest way for me).
I connect my CF card using a card reader and let Adobe Photodownloader do the work.
Inhere I use several options:
- convert the CR2 file to a DNG
- back up the original CR2 on a separate disk
- rename the DNG to yyyymmdd (shot date) and sequence number
- add a metadata template for copyright to all the DNG files.
Sorting out the keepers I open the DNG in ACR and either hit Open (for open directly in PS) or use save as Tiff or PSD depending on next step in development or simply hit Done to apply changes and leave it for later use.
The advantage of having both ACR in PS and Bridge is huge. The only difference between both is that by default PS has the Open Button selected and Bridge (open in Camera Raw) has the Done button selected, thats all.
But here is the good part, you can use both simultaneously! For example have PS in film strip mode with multiple files selected and when changes are ready hit Save as start the process but locks up PS itself. Switch to Bridge and use Open in Camera Raw and start with the next job while ACR PS is still running in the background
When I open a DNG in PS using ACR in either PS or Bridge I continue developing with actions and fine tune with layer mask, brush etc etc.
Sometimes use Save As for PSD with the layers still active (huge files) when needing to revisit or not quite ready. But mostly I use an action to flatten the files and save as PSD.
Both DNG and PSD are ending up in my archive, my clients receive whet they want, PSD, Tiff but mostly jpeg and resized.
When having the job finished and every once in a while I clear out the original CR2 files from Back up because in all the years I use DNG (at least 5 years) I never had to use the original CR2 instead of the DNG that is thoroughly backed up as is the original PSD.
But since disk space is cheap you can choose to keep them.
An other option is to include the original raw file in the DNG but I would not recommend that because the file size is getting almost twice as big.
The biggest plus side for me using DNG is that the xmp data is written directly to the file while original CR2 or NEF needs an xmp side car file next to it with this data.
However saving changes to metadata is taking a bit longer to a DNG then to an XMP side car file, depending on system resources and time this never been a real problem for me

I cannot upload even a small (30kB) photo to my Kijiji website add even though the site states that it accepts up to 4MB

''dupe of https://support.mozilla.org/en-US/questions/916099''
That is about it - my small jpeg photos are being rejected by the Kijiji web site for upload.

Please do the following. 
#In the location bar where you normally type in a web address, type '''about:config''' and hit Enter. 
#If you see a window which says "This might void your warranty!", click the button which says "I'll be careful, I promise" so you can continue with the next step. 
#In the filter at the top, type: '''keyword.URL''' 
#Double click it and remove whatever's in there and replace it with http://www.google.com.au/search?q= and then click OK. 
#Close the tab
The URL to add in "keyword.URL" becomes a link in this post, so right click it and choose "Copy Link Location" to copy it to the Windows clipboard. Then hit CTRL+V to paste it. Saves you having to type the whole thing.
'''To reset your home page, do the following'''. 
* Go to the site you want to set as your homepage. 
* Click the Firefox button, go to '''Options '''| '''Options '''| '''General'''. 
* Make sure it says "''Show My Homepage''" in the first dropdown menu. 
* Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen. 
If this suggestion resolves the problem for you, please click the '''Solved it''' button next to this post after you log in into the forum. This will help others searching for a solution to the same problem.
Thanks.

The opened web pages are not correct even though the address in the link roperty is correct. The web page opens a blank page and says "Done"

When I search for a web sites, it gives a list of connected web site.
If I click a particular web site, it immediately opens a blank page and says"done" at the bottom of the page. The opened web address is wrong even though the link property shows the correct address.
What is wrong?
Chandra Dhas

Publish your site to a local folder and launch it in your browser by double clicking the index.html file to see if the problem exists there.

I'm having trouble downloading an update to my MacBook Pro. It comes up with my husband's name even though the MacBook is registered under my name and I have my own ITunes acct. how do I get his name off the ITunes update on my Mac

I'm trying to download an automatic update from ITunes but when I click on "Update" it comes up with the message, "You have updates available for other accounts" an tells me to sign in to my husband's account, even though the MacBook is registered in my name and I have my own ITunes account. My husband has his own MacBook and ITunes acct. How do I fix?

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
Apple ID FAQs
http://support.apple.com/kb/HE37

Contact photos are not showing up in Mail message list, even though the message will link to the contact card in Address Book with the photo in it.

I'm using Mail 5.3 and Address Book 6.1.3 on X 10.7.5. I want my contact photos to show up in the message list on Mail, but only some of them do, even though the message will link to the contact card in Address Book with the photo in it. I've even tried replacing a photo that doesn't show up with a photo that does show up for a different contact but no luck. I am syncing to one other Mac, an iPhone and an iPad via iCloud.

I'm using Mail 5.3 and Address Book 6.1.3 on X 10.7.5. I want my contact photos to show up in the message list on Mail, but only some of them do, even though the message will link to the contact card in Address Book with the photo in it. I've even tried replacing a photo that doesn't show up with a photo that does show up for a different contact but no luck. I am syncing to one other Mac, an iPhone and an iPad via iCloud.

Why do some of my playlists gray out even though the music in the list has been downloaded to my iPad ? When they are grey I can't access them.

I have a second gen iPad using the cloud and iTunes Match. On several occasions ( I was not wifi connected ) several of my playlist greyed out not giving me access to them even though the music in these particular playlists have been downloaded to my iPad. Any ideas why this happens

No...should I? I don't have a cluttered desktop at all. Though I guess I do have some folders with a lot (thousands) of PDF's in them. Far less than I did before, though. I moved a bunch of stuff to a portable hard drive last week.

No image appears in the workspace even though the image is opened by Photoshop

I just installed Photoshop CC 2014.2.2. from the Creative Cloud so all settings are still default, etc.
However when I try to open a .jpeg, there is no image that shows up in the workspace. It is just a blank workspace, even though the file shows up as "Background" to the right of the workspace.
I have tried both "Open With Photoshop" when clicking on the .jpeg, as well as having Photoshop already open and then choosing File -> Open and browsing to the file and opening it.

I would suspect that you may need to update you display's adapters device driver if Photoshop apears to be working but not displaying your image's layers correctly.

I have just purchased a compilation album but some of the songs haven't downloaded, even though I have paid for them. Why is this and when will i get the songs that I have paid for?

I have just purchased a compilation album but some of the songs haven't downloaded, even though I have paid for them. Why is this and when will i get the songs that I have paid for?

Hi there cortleavis90,
You may be able to download the purchases from the Past Purchases section of the iTunes Store. Take a look at the article below for more information.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
-Griff W.

Why is OS X Lion showing download even though I have the most current version?

Why is OS X Lion showing download even though I have the most current version?

Hi..
Nothing to be concerned about. The download is available if you want to download Lion again to create an install disc or re download Lion on any other authorized Macs you have for free using the same Apple ID.
How to create an OS X Lion installation disc | MacFixIt - CNET Reviews

I download radio programmes via Podcast, but have recently found that some episodes play for only 30 seconds and then the whole app quits. This happens even though the whole episode has downloaded. I would be grateful for advice.

I download radio programmes via Podcast, but have recently found that some episodes play for only 30 seconds and then the whole app quits. This happens even though the whole episode has downloaded. I would be grateful for advice.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Delete the problem episodes and redownload.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

How do I stop "unable to download item" pop up appearing even though the item has downloaded

how do I stop "unable to download item " pop up appearing even though the item has downloaded

I'm getting the same response since upgrading to iso8 and downloading that bloomin' U2 album!
I removed the album using the Apple tool, removed the booklet via itunes on my PC, still get that frocken pop-up!!!
I have updated to ios8.2 patch, STILL GET THE POPUP SINCE DOWNLOADING U2's HORRIBLE ALBUM!!
CAN OBI-WAN PLEASE HELP????

Photoshop CS6 is downloaded even though the link states Photoshop CS6 Extended.

Similar Messages

Maybe you are looking for