Photoshop CS6 is not showing any network drives within windows 8.1.

Photoshop CS6 is not showing any network drives within windows 8.1, I can only browse the local disk for files. Please advise?
And when i try opening a file directly from the network, photoshop starts but does not open the selected file?

The dialog you show there looks like it may be a CS6 open dialog running on windows 8.1 that is showing what is local. Network is not highlighted selected.
Here is a CC Open one windows 7 pro showing areas of what is accessible.

Similar Messages

Workstation not mapping any network drives

Im having an issue with different workstation not mapping any network drives. The issue to would seem totally random. Each time is over a wired connection. I havent been able to find a TID about this. The issue also just seems to have started, however no changes have been made to any of the workstations Ive seen this on. The errors I get in the login script are below. The servers are all NetWare 6.5SP7. Suggestions?
LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 15 (8819).
LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 13 (8819).
LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 9 (8819).
LOGIN-LGNWNT32.DLL-918: This utility was unable to get connection information. Error code: 8801

Hi,
technomoney wrote:
>
> Im having an issue with different workstation not mapping any network
> drives. The issue to would seem totally random. Each time is over a
> wired connection. I havent been able to find a TID about this. The
> issue also just seems to have started, however no changes have been made
> to any of the workstations Ive seen this on. The errors I get in the
> login script are below. The servers are all NetWare 6.5SP7.
> Suggestions?
>
> > LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 15 (8819).
> > LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 13 (8819).
> > LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 9 (8819).
> > LOGIN-LGNWNT32.DLL-918: This utility was unable to get connection
> > information. Error code: 8801
Basic network connectivity issue. One known common culprit for this
error is a workstation firewall, but the raw symptom just means that
unexpected network connectivity problems occured.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

TS1398 My iphone 4 will not show any networks, when there is wifi, what do i do?

I ordered my iphone 4 from ebay, and t is unlocked. its really new but fror some reason will NOT connect to wifi. it wont even show other networks when there is wifi. any solutions to my problem??

I have this Exact same issue, I bought it from a friend though, and it will not show any networks to choose while I am at home and my computer and other phones are connecting perfectly to my wifi. I have tried to reset the network settings, I just restored the whole phone when I transferred my info to it. If anyone knows of anything else please advise.

Photoshop CS6 will not open any graphics files

Photoshop cs6 will not open graphic files, i have reset the settings. I get to see all the files in preview but when I try to open a file nothing happens, no error messages, no file opens, nothing.
When I use bridge I try to open the file with open in photoshop cs6 but again nothing happens. I found that if I reboot my PC photoshop will work correctly until I shut photoshop down but if I reopen it later before rebooting my pc now graphics files will open.

Hi Sorry, getting my 2 machines confused. Photoshop works perfectly on the Mac, it is the PC with problem.
I have included the info requested:
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2800 MHz
Built-in memory: 12278 MB
Free memory: 9943 MB
Memory available to Photoshop: 10988 MB
Memory used by Photoshop: 70 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce 8800 GTS/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce 8800 GTS
OpenCL Unavailable
Driver Version: 8.17.13.142
Driver Date: 20120515000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: NVIDIA GeForce 8800 GTS
Video Card Memory: 320 MB
Video Rect Texture Size: 8192
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Junk\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 97.7G, 20.5G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Optional and third party plug-ins:
PhotoTools 2.6 Hidden NO VERSION
PhotoTools 2.6 Hidden NO VERSION
PhotoTools 2.6 Professional Edition 2.6.5
PhotoTools 2.6 Professional Edition Batch 2.6.5
PhotoTune 3 3.0.7
PhotoTune 3 Batch 3.0.7
Topaz Clean 3 10.0
Topaz ReMask 3 10.0
TopazRemaskAutomate NO VERSION
Plug-ins that failed to load: NONE
Flash
onOne
Mini Bridge
Kuler
Installed TWAIN devices: NONE
Hope this info helps

I can not map a network drive in window 8.1 via VPN

Dear sir / madam,
I face a big problem. My company use VPN Connection. After my company upgrade the window from Window 7 to Window8.1 , we find that we can not reconnect the network drive. please find the details below:
1. I success to map drive and then logout / switch user.
2. wait two /three hours
3. i find the drive is disconnected.
4. when I try to reconnect, window can not find again. then I try to use netstat
C:\Windows\system32>netstat
TCP 172.28.97.31:58206 test-server:http TIME_WAIT
Then, i try to use cmd
5 it show reconnect successful by net use command. However , I need waste many time and I can not find the drive in window.
if I restart window, i can reconnect it quickly and find the drive in window.
the server is window server 2008 r2 and located at difference site.
if the server and PC located at same site, it is no problem.
both the server and PC are joined in same domain.
it is dell server and Lenovo M82 PC
please help me to solve the problem
(window 7 also have this problem. However, i can click the drive and it can reconnect quictly.i cannot do this in window 8.1.......it loop again)
thanks

Hi,
Is there any error message throwed when you reconnect the mapped drive? Can you directly access the UNC path of the mapped drive? What VPN programs do you use? Please check if the VPN client connect correctly.
You could refer to the thread below to check if the AD account is restricted by VPN.
Can't access mapped drives through VPN when away from office
http://social.technet.microsoft.com/Forums/windows/en-US/a0ca41aa-08b8-4e46-a314-ffb7e401bd7a/cant-access-mapped-drives-through-vpn-when-away-from-office?forum=w7itpronetworking
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I can not map a network drive in window 8.1 under VPN

Dear sir / madam,
I face a big problem. My company use VPN Connection. After my company upgrade the window from Window 7 to Window8.1 , we find that we can not reconnect the network drive. please find the details below:
1. I success to map drive and then logout / switch user.
2. wait two /three hours
3. i find the drive is disconnected.
4. when I try to reconnect, window can not find again. then I try to use netstat
C:\Windows\system32>netstat
TCP 172.28.97.31:58206 test-server:http TIME_WAIT
Then, i try to use cmd , net use /delete and then try to reconnect test-server
5 it show reconnect successful by net use command. However , I need waste many time and I can not find the drive in window.
if I restart window, i can reconnect it quickly and find the drive in window.
the server are window server 2008 r2 and server 2012, they located at difference site.
if the server and PC located at same site, it is no problem.
both the server and PC are joined in same domain.
it is dell server and Lenovo M82 PC( Intel Lan 82579LM/V Driver)
please help me to solve the problem
(window 7 also have this problem. However, i can click the drive and it can reconnect quictly.i cannot do this in window 8.1.......it loop again)
thanks

Hi,
How did you map the network drive? Manually via GUI? Command? GPP? If you're using one of the above solutions, then try other solutions as a alternative way to check the result.
According to your description, If Windows remains unable to reconnect mapped Network Drive at login, then I would suggest you created a batch file with net use command, use it as an logon script, this provides an alternate way to reconnect drives on
a re-logon.
example
@echo off
net use * /delete /yes
net use x: \\server_name\shared_directory_name
You can find detailed information in the following link
https://helpdesk.egnyte.com/hc/en-us/articles/201638304-Mapping-a-drive-using-a-net-use-command-and-logon-scripts-for-domain-users
http://technet.microsoft.com/en-us/library/bb490717.aspx
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Finder not showing connected network drives in Devices section

I have a number of network drives on my LAN, some NAS drives, some other Macs and of course a Time Machine. Prior to updating to OSX 10.9.5 when I used finder to connect to one of these shares the name of the connected share used to appear in the Finder Sidebar - under the devices section. Now when I do this nothing appears, although I do get an icon on the desktop and I can still access the remote files.
I have set/reset all the finder view settings from the Preferences panel and also tried deleting the finder and sidebar preferences files without improvement. I do have "Path Finder" installed as well and this still works as normal.
I contacted Apple support and after a hour or so they promised to get an engineer to get back to me sometime this week.
Has anyone else seen this behaviour ?
If Apple don't come up with any ideas I will have to experiment with uninstalling other apps which might indirectly case it, like Path Finder and even Paragon NTFS drivers.
It's not a show stopper, but a rather annoying inconvenience.
Thanks in advance for any replies
Dave

Hello birdy.....,
Sorry to take so long responding. Major disaster! My whole wall bookcase just tumbled, and I'm still working at excavating the family (of Macs).
Your card should work. I've used the Acard cards by the dozens without problem, though I've never used that particular 6860 card or set up a RAID ARRAY. Just checked, using a 6880 (RAID) though as a controller card and not as a RAID ARRAY, and found that my 2002 QS Mac would not see a standard hard drive(#2) running OSX (10.2) that had been formatted by the OSX install disk using the stock bus on the motherboard. It would, however, see a hard drive(#3) that had been formatted while connected to an ACARD controller card (6280). I'm guessing that an OSX installer disk is prepared to see and to deal with a SCSI drive, and that Disk Utility is not.
Check that.
Just removed the controller card formatted drive(#3) and re-installed the OSX(10.2) drive(#2); this time my 2002 QS saw it right away, both on the desktop and in disk utility. I guess it needed personal messenger service.
As I recall, I've seen that happen before using controller cards; as a result, I've always taken care to format a new hard drive by connecting it to a controller card if that is the way I intend to use it. Hard drives can be capricious, sometimes. At any rate, try formatting your hard drive(s) with an OSX installer disk (hoping you have one) while connected to the ACARD controller card - just click on erase (twice) and the drive formats automatically.
I'm a little mystified by reference to drivers; never installed any drivers, and always assumed none were needed.
Hope that helps. Check back and let me know.
Jon

WSE2012R2 Dashboard Stoage Tab Does Not Show ANY Hard Drives or Folders

I have been using WSE2012 for nearly two years as a "home" server. I recently decided to upgrade to R2. After spending several days trying to "migrate" to R2 without any success, I finally did a fresh install to my original system drive
(a 240Gb Samsung 840 Evo SSD). The install went well until I checked all of my data drives (4x2Tb, 2x1Tb, 1x3Tb and a 2Tb "storage spaces" drive). I found that only three of the drives were online and useable. The "storage spaces" drives
were not even visible in Disk Manager and all of the other drives were "offline". After doing a lot of searching with Google, I finally figured out how to make the "offline" drives "Online" with PowerShell. With much more searching,
I also finally figured out how to "bring back" the "storage spaces" drives with about four lines of PowerShell code so I thought I was finally home free... But no such luck. I then had a lot of trouble restoring my "ServerFolders"
although everything else seemed to be working. I also had rebooted several times while working on these things without any issues. After finishing up yesterday, I planning to finish working on the "ServerFolders" earlier today.
I ran into a problem right away, however, when I opened the Dashboard and went to the Storage tab only to find that NONE of the Hard Drives and "Server Folders" showed up. I had an alert that the "Server Storage Service" was
NOT running. I checked and found it to be "stopped" and in "manual" mode. After starting the service, the Storage Tab showed that it was being refreshed. After a lengthy wait, it never did refresh and the "Server Folders" item
on the Home Tab showed "N/A". I tried rebooting again. When the server came up, I checked the service again and found it to be running (although it was still on "manual")... But once again, Storage Tab never did refresh properly and still
showed nothing. This time I changed the service to "Auto" and also tried "Restarting" the service, to no avail. I rebooted again. This time, when it came back up, I first checked the service again and it was running and still on "Auto".
Before opening the Dashboard, I checked the "Files and Storage" section in "Server Manager" and everything looked good. All of my hard drives and my "storage spaces" drive appeared with no apparent issues so I thought that everything
was finally OK... Wrong!!!!! I opened the Dashboard and went back to the Storage Tab only to find that it still would NOT refresh so that NONE of my hard drives or folders were showing. I am totally lost at the moment. How can everything actually be there
and okay but NOT appear in the Dashboard which, by the way, was working fine yesterday -- and I did not make any changes whatsoever between yesterday and starting to work on the system today. I am totally lost. Can anyone please help me resolve this
issue?????
Denis W. Repke

PROBLEM SOLVED. As I was just getting ready to "bite-the-bullet" and reinstall 2012 R2, I discovered something that led me to the solution. When I was previously trying to restart the Windows Storage Service, I "thought" it was restarting
okay. I was restarting it by right-clicking on the service. When I "started" it this way without opening up the service properties, it would immediately change from "stopped" to "running". What I did not realize was that the service
was quickly stopping "without" refreshing the screen so that "running" was still displayed even though the service had stopped. Once I realized that the service was not actually restarting, I tried another Google search based on this fact
which led me to some forum threads that helped me solve the problem since I found others with essentially the same problem. I found two corrupted registry keys under Windows Server\Storage Services. One of the keys was a major entry, the other was in the "Folders"
subfolder. After deleting BOTH keys, the service restarted without any issues and my drives and folders reappeared in the dashboard. A reboot was "not" required. What a pain! But everything is good now.
Denis W. Repke

OSX 10.9 not showing all network drive contents

Hi,
I one of the users in our department has updated to osx 10.9
when the user connects to the network drive it connects but when the user navigates to the folder they need it appears to be empty.
We have tested on or Macs and the contents show up fine.
Any help would be greatly appreciated.
I have tried both smb:// and cifs:// but to no avail.
Thanks

Hi,
There are few hiccups after 10.9 release. Have you checked and installed the following pathch ?
http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Snoop does not show any network traffic other than own machine

Does anyone know of a way to troubleshoot a 3COM 3C900-Combo card? I reinstalled the card which lets the snoop command show activity of the machine but the card does no send or recieve (ping) any other machines onm the network. The IP and subnet are correct and the ifconfig - a shows the card as "up". Any help would be appreciated. I sur ewould like to get Solaris machine on my NT network.

Hi,
Please verify if in the BIOS the settings of "PNP OS" is set to FALSE, instead of TRUE. This may help fix the problem.
If this does not resolve the problem can you please enclose a snipped output of the dmesg related to elxl0 and "ifconfig -a" output. Please confirm the sub net mask is set right. Cat /etc/netmasks to confirm.
Hope the above helps.
Thanks
Sujeet

SAP B1 Client is not showing any company after installing Windows 7

Hello experts
By installing Windows 7 on a computer which had Windows XP installed before and trying to re-install SAP B1 client on that computer, company list is being displayed as empty. This is only happening on this computer as it is the only one which has been upgraded to Windows 7, SAP client is displaying all companies if it is run in other computer. So the issue is only affecting this computer.
Thanks and regards

Hi Javier,
Please check below links.
Company list empty in login screen SAP B1 9.0
[SAP Business One 9.0] Company Databases not appearing
SAP Business One Client Not Install In Windows 7 Proffesional
Hope this help
Regards::::
Atul Chakraborty

My iphone 4 will not show any wifi networks

my phone will not show any wi-fi networks i'm not sure whats wrong, i tried restoring multiple times nothing changed.. im not sure what to do.

I have this Exact same issue, I bought it from a friend though, and it will not show any networks to choose while I am at home and my computer and other phones are connecting perfectly to my wifi. I have tried to reset the network settings, I just restored the whole phone when I transferred my info to it. If anyone knows of anything else please advise.

Apple TV 3 won't show any networks

I have a Apple TV 3 and a IMAC and a Macbook pro and a Apple wireless router…I can connect using my iPhone,iPad and all the computers with no issues but the AT3 will not stay connected, it will either be connected and work for 5-20 mins and stream just fine and then lose connection and then I go to network and Wi-FI and it will not show any networks at all. I've done all the steps as far as a reset of the AT3 and a restart of the AT3 also a restart of the apple router along with the cable modem. It worked perfectly fine with no issues on 28th of August 2014 and I went away for the weekend and came home to a non working device. I'm losing faith in my AP3 I may have to change to a amazon fire box instead. I hope it's something simple, I haven't updated anything and everything is up to date my airport utility and my apple tv 3.

Hello TDIforthewin,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Apple TV issues:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/HT200197
Resolve network or streaming issues
Troubleshoot Wi-Fi networks and connections.
Switch between wired and wireless networks.
Learn how to resolve issues streaming content from third-party content providers. Learn more about third-party content providers.
If you're streaming content from a computer or iOS device using Airplay or Home Sharing, try these steps:
Resolve issues with Airplay and Airplay Mirroring.
Learn how to use Airplay Mirrorring.
See how to set up Home Sharing.
Troubleshoot Home Sharing issues.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

I would like to use time Machine to back up to a network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it

I currently have a mini server (OSX10.8.5, server 2.2.2) that I am using Time Machine to back up 4 external drives that are connected to the server via firewire 800. I would like to use Time Machine to back up to a windows network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it for use.
Can this be done
Thanks for any and all help

The supported targets for Time Machine backups are local (direct-connected) disks, and network targets include Time Capsule, a disk hanging off the current-generation AirPort (though not earlier AirPort devices), and OS X Server systems.
The Time Machine storage is based on the HFS+ file system, so I would not expect TM to work with SMB file services.
While there are hacks to allow Time Machine to access network drives, I would not consider those to be reliable. Skim the forum and the 'net for related details, and for previous discussions of setting this up and the related issues that can arise.
Remember to test the recovery with whatever you decide to use; whole point of backups is the ability to restore the data, after all.
If you want to learn more about Time Machine, Pondini is an excellent resource.

Windows did not detect any networking hardware, Windows 7, New Hard Drive

Message "Windows did not detect any networking hardware"
Satellite P505 S8980 Windows 7 Home Premium.
I replaced the Toshiba 500 GB HD with 500 GB Seagate.
Device Manager icon for any device with yellow exclamation mark,
Click on "Update Driver". Lan eNet details as follows:
Antheo - R8132 PCI-E Fast Ethernet Controller (NDIS 6.20)
Browse to the folder where the setup program has the driver...
Message: "The best driver software is already installed."
(But the yellow exclamation mark still harasses me.)
--- Go to "Setup new connection" ---
"Choose a connection option"
Click on "Connect to the Internet"
Response: "Windows did not detect networking hardware"
As near as I can tell, that translates from error 0x8E5E0247
I have this same error on other yellow exclamation marks respective of what kind of device it is.
=> To test my sanity, I put the old hard drive (same size) back in and except for the impact of slowness due to error retries, everything works okay.
Note:
Same issue (hardware not detected) for Video adapter and Audio.
I bought new USB Wireless adapter to test, and the driver installed but not activated because "not digitally signed", and that same issue fits all the above hardware. I down loaded them from Toshiba, and they are confirmed installed, but not accepted with digitally signed. I have uninstalled and reinstalled with same results.
Solved!
Go to Solution.

I'm discovering I am not as well as I thought... running on the AF hard drive which was built with a copy drive from old format drive which was the product of system recovery disc set.
Review for context: Advanced Function HDD
Scenario that exposes harm caused by cloning data from 4K blocks drive to 512 bytes blocked drive (AF)
Toshiba supplied Windows-7 System Restore Discs: to factory state
Then I built the Windows-7 Repair Disc... used later.
Hard drive was replaced when it caused SMART warning at every system boot.
Acronis was only utility that quickly detected problem (3 sectors had permanent read errors.) Active@Disk Image and Power Quest Drive Image (Ghost) did not detect the issue.
I tried Seagate 500 GB and Western digital 500 GB HDD drives as copy target.
That new drive would not boot: "Required source not found"
Booted My newly created Windows-7 repair disc, and used to to fix startup.
See images.
That worked and then the ST9500423AS disc booted.
Now... next day I discovered Window Update is not working.
I get message:
Windows Update cannot currently check for updates, because the service is not running. You need to restart your computer.
I ran Microsoft Fixit for updates. It says it fixed two items.
I still have the problem.
The service shows "started"
Control Panel/ ACTION Center/ Maintenance/ Check for Updates
"No action needed"
"Windows Update does not require any action"
I checked Update History...
... It is empty, else window is vacant... blank.
Soooo..... for a sanity check, I swap out hard drive; go back to the old format (which is the one I copied).
It works! 7 updates to install, including SP1... but I did NOT install them.
Switch back to the AF drive... Update doesn't work. I am broke again.
Is this another strange problem caused by the Advance Format issue?
What to do?
By the way... I did install an Intel storage Matrix driver update, but I do not have RAID chip, so that driver is not for me... unless I missed out on something.
Carl

Photoshop CS6 is not showing any network drives within windows 8.1.

Similar Messages

Maybe you are looking for