Photoshop CS6 not allowing Check In with Adobe Drive 4.2 & AEM 5.6 DAM

I have just started to set up a AEM DAM for my design team to utilize. While it worked exactly as expected on one team member's computer, I am having some problems. I can only check items in or out through Bridge CS6. With both PS and Illustrator the "Check In" menu item is greyed out. Also, when I open a file in PS from the DAM, it doesn't automatically check the item. I've seen it work fine on a cowokers computer with a seemly similar setup. Any ideas?
Mac 10.7.5
PS CS6
Bridge CS6
Adobe Drive 4.2
CQ 5.5 and AEM 5.6 (same thing on both)
Thanks in advance!

In order for the Check In menu item to appear in the supported CS apps., the asset must be opened and a change must be made (it will then automatically be checked out).

Similar Messages

Why does my Photoshop Cs6 not let me view my Nikon D7100 photos in Camera Raw and photoshop when it does my Nikon D700?

Why does my Photoshop CS6 not allow me to download my Nikon D7100 photos into camera raw and photoshop when it does my NIkon d700?

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
D700 first supported in Adobe Camera Raw (ACR) 5.1 (CS6 ships with ACR 7.0)
D7100 first supported in ACR 7.4
You probably just need to update Camera Raw in CS6 via Help > Updates.
Confirm which ACR version you have installed via Help (Win) or Photoshop (Mac) > About Plug-In > Camera Raw.

I am trying to download Photoshop CS6 onto my Mac from the Adobe website, but I do not have a serial number. I made an Adobe ID, but the serial number is not under "My Products" nor have I received an email including a serial number. I do not know how els

I am trying to download Photoshop CS6 onto my Mac from the Adobe website, but I do not have a serial number. I made an Adobe ID, but the serial number is not under "My Products" nor have I received an email including a serial number. I do not know how else to find the serial number. Please help!

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

Does Photoshop CS6 Extended allows users to crop individual frames?

Does Photoshop CS6 Extended allows users to crop individual frames? As in just one segment of the video? If so, how is it done?

Hi there
The Crop tool in Photoshop functions by cropping the entire image area - however, you can use a Layer Mask to edit an indiviual video or animation frame, as shown below.
1. Start by importing your video or animation in Photoshop, making sure to convert frames to layers (File > Import > Video Frames To Layers...). Go to your layers panel and select the frame you'd like to crop. Turn on the visibility of the layer by clicking on the small check box to the left of the layer icon - it should turn into an eye as shown below. Then, click the "Add vector mask" icon highlighted below.
2. Next, select the Rectangular Marquee tool (or use an alternative selection method if you want a different shape) and draw a seelction around the part of your video/animation you want to keep.
3. Go to Select > Inverse to select the inverse of the area you just selected.
4. Grab the Paint Bucket Tool and fill the selected area with pure Black (#000000). This will effectively "crop" the layer you have selected. You can see below that the layer underneath my selected layer is now showing through where I filled the selection with black.
The great thing about using a mask is that you can edit it or delete it altogether if need be. Note though that the area you mask will show up as transparent pixels in your Timeline panel - you can see the layer I edited on the far right of my timeline in the screenshot above.
Please post again if you need additional help, or if what I demonstrated is not what you were trying to do.
Cheers!

Ff does not allow me to download adobe reader

ff does not allow me to download adobe acrobat reader

No Flash for iPads, iPhones, or iPods
Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash. Adobe is not providing Flash for Apple iOS devices, and they no longer provide Flash for any other cellular phones. Flash is officially gone.
Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
A sample of Apps that can display some Flash content:
1. Puffin
2. SkyFire
3. Photon Flash
4. Browse2Go
5. Swifter
Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that."

Photoshop will not allow me to save to web any more?

photoshop will not allow me to save to web any more?

I uninstalled Photoshop CC along with the preferences.
I restarted, and logged back into Creative Cloud
where i reinstalled Photoshop CC.
Began immediately working in the program
and of course testing the save for web feature along with the other save options.
Seems that all is well. I hope this works for you as it did me.

JITOM error movement type 000 is not allow (check your entry)

Hello experts,
In transaction JIOM i try to do an ACTION, but the system display below error message.
movement type 000 is not allow (check your entry)
Could you please help me this is very urgent..
Regards!!
Hugo

Hello Hugo,
Can you clarify what the functionality of transaction JIOM is? I am assuming that this is your own transaction? Going from previous cases of error L3001 being raised, this is almost always associated with the creation of TO documents, can you confirm this is correct?
Can you check that the Item category is relevent for picking? (Transaction 0VLP)
Regards
Stephen

Rules are not allowed for jobs with set 'archive edited messages only' flag.

Hi,
We are on AEX 7.4 and have enabled user defined search and also setup archiving. Even though the retention period has expired but still the messages are not being
archived.
We see following issues:
1. Unable to setup archiving rule in Runtime Work Bench, we are getting following error:
Rules are not allowed for jobs with set 'archive edited messages only flag.
2. Unable to set the expiration of messages using the following link.Each time we specify the number days it shows the same number of
messages expired.
http://XXXXX:50000/MessagingSystem/job/reorgdb.jsp
3. However if we click on "remove messages" button the messages are getting deleted which tells me that the messages are not matching any
archiving rule hence are being removed.
Any pointers to the above issue are appreciated!!!
Thanks,
Rajeev

Hi,
Please check the [link|http://www.****************/Tutorials/XI/Archiving/Index.htm]
Also check this
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=147266890
Regards,
Naveen.

I had a recent not so great experience with Adobe Connect

I had a recent not so great experience with Adobe Connect that I need you help on. Keep in mind that I tested the Connect session with the presenter the day before and Connect worked very well.   On the day of the event I opened the room to get the speaker logged in as a “Presenter”. No problems with that however I noticed that there was no “Share My Screen” button to be found anywhere. In essence I could not get him connected.
To resolve this I was forced to close out the old session and start a fresh one where I could share the presenter’s screen. Once we were going a few of the participants mentioned that they were having problems getting audio. Most online said they were fine but a few mentioned that we not getting the audio fluidly. I explained that it may be due to their bandwidth and to be patient that it would cache. Then I notice that same issue that I had talked about with a Connect technician before where all audio stops working after about 1hour into the presentation. They way I have resolved this was to log the presenter out and log him back in.
Keep in mind that I am online with 3 other computers via WiFi monitoring and seeing the presentation as the online viewers are seeing it and I can see it coming through flawlessly. So, for the few who had problems I attributed it to the lack of bandwidth in their area.   However, at 1 hour into the presentation the audio dropped out completely while the video was fine and this reflected on my machines as well. This is the continuing experience that I keep having with Connect. The total amount of people online was 9.
Now, I have a Photoshop user group meeting that will take place online this Thursday June 17th from 5 – 7pm featuring Dave Cross and we have about 200 people registered for that. It would be great if we could have one of the engineers attend that session.
I look forward to your reply.

I had a recent not so great experience with Adobe Connect that I need you help on. Keep in mind that I tested the Connect session with the presenter the day before and Connect worked very well.   On the day of the event I opened the room to get the speaker logged in as a “Presenter”. No problems with that however I noticed that there was no “Share My Screen” button to be found anywhere. In essence I could not get him connected.
To resolve this I was forced to close out the old session and start a fresh one where I could share the presenter’s screen. Once we were going a few of the participants mentioned that they were having problems getting audio. Most online said they were fine but a few mentioned that we not getting the audio fluidly. I explained that it may be due to their bandwidth and to be patient that it would cache. Then I notice that same issue that I had talked about with a Connect technician before where all audio stops working after about 1hour into the presentation. They way I have resolved this was to log the presenter out and log him back in.
Keep in mind that I am online with 3 other computers via WiFi monitoring and seeing the presentation as the online viewers are seeing it and I can see it coming through flawlessly. So, for the few who had problems I attributed it to the lack of bandwidth in their area.   However, at 1 hour into the presentation the audio dropped out completely while the video was fine and this reflected on my machines as well. This is the continuing experience that I keep having with Connect. The total amount of people online was 9.
Now, I have a Photoshop user group meeting that will take place online this Thursday June 17th from 5 – 7pm featuring Dave Cross and we have about 200 people registered for that. It would be great if we could have one of the engineers attend that session.
I look forward to your reply.

How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps!

My creative cloud subscription is over, and I'm trying to open up Adobe Photoshop CS6 which I got from my Adobe Creative Suite 6 Design & Web Premium - Education Edition, but it keeps trying to validate my creative cloud when I know it's expired. What do

My creative cloud subscription is over, and I'm trying to open up Adobe Photoshop CS6 which I got from my Adobe Creative Suite 6 Design & Web Premium - Education Edition, but it keeps trying to validate my creative cloud when I know it's expired.
What do I do? Help ):

How do I prevent Creative Cloud from taking over my CS6 perpetual license?
https://forums.adobe.com/thread/1584746

I am getting a message telling me that my security settings will not allow a download of Adobe Reade

I am getting a message telling me that my security settings will not allow a download of Adobe Reader. I have enabled Java and disabled my anti-virus software but I still get the message. What can I do?

See if going thru the help page below resolves anything:
http://helpx.adobe.com/acrobat/kb/quick-fix-install-download-reader.html

Not allow any application with ip address login to db

Dear sir,
Is there any way to not allow any application with ip address login to db?
such as not allow from client with ip 192.168.5.xxx and toad .
db version 9.2.0.8
os solaris 9, 64 bit
Thanks for advance
Chara

Not sure if there is really a reliable way to restrict Oracle connection based on application name: see following thread:
Denying login via all applications to oracle-server

Depreciation key SBDK not allowed (Check your entry)

Hi,
Friends
i am getting an error in assets account,i have already created dep key SBDK in T.CODE"- AFAMA.
Fallowing is an error"-
Depreciation key SBDK not allowed (Check your entry)
Thanks + Regards in Advance
SN.Noorie

Hi,
This is not the forum for this..please check the following link:
http://sap.ittoolbox.com/groups/technical-functional/sap-acct/am-depreciation-key-xxxx-not-allowed-check-your-entry-815125
Regards,
RS.

HT1386 I bought a new computer and I cannot transfer my library to this new one. The message says that I'm not allowed to sync with two computers??? How can I delete the previous from my account???

I bought a new computer and I cannot transfer my library to this new one. The message says that I'm not allowed to sync with two computers??? How can I delete the previous one from my account???

You cannot transfer from the iPhone to the computer.
You must move the contents of your old computer to the new one directly.
Use an external hard drive perhaps or restore your old computer backup to your new computer.
The iPhone is not the source of your data, that is the computer, the iPhone is only a slave device to iTunes.

Photoshop CS6 not allowing Check In with Adobe Drive 4.2 & AEM 5.6 DAM

Similar Messages

Maybe you are looking for