Photoshop CS6 Vanishing Point Font Size

How do I make it bigger? When you render it to photoshop you have to zoom in to see it.

I rendered the measurements to Photoshop but when you do it brings them in so small
you can't read any of the measurements. Anyway to increase this font so you can read it?

Similar Messages

Photoshop CC Tracking, Kerning, font size MESSED UP

The Photoshop CC Tracking, Kerning, font size is MESSED UP.
If you try to adjust anything by scrubbing it makes a huge number like 40000....
holding ALT doesn't help either... Need a fix for this fast!

I don't want to hijack this thread, but I'm experiencing an issue that is different, but may be related. It is with the same area in Photoshop CC, but the bug I'm getting is a little different:
I don't have to scrub, I can just type a number like 50 for tracking, and when I hit enter, it changes to 11. 100 changes to 23. 200 changes to 47. If I scrub, I can scrub to a super high number like 6876, and when I release the mouse, it changes to 262. Scrubbing to 336 changes to 12 upon release.
coincidentally, typing in 6876 and 336 gives me results of 1650 and 80 respectively - so apparently when I type in a number it changes to approximately a quarter of its value, but not exactly, where as scrubbing gives me around 1/26th or 1/28th the value. The values given are consistent each time when I type in a number. 200 tracking always converts to 47 for some reason - I don't know about scrubbing..
This started without resizing the text. I just used the T tool. Typed some characters, and then tried adjusting the tracking.
When scrubbing other settings like Font Size and Leading I get this same effect where it jumps down to a much lower number than set. If I manually type in a font size, it works appropriately.
This happened in CS6 and CC. I don't recall what I was working on in the past when this occurred, but today when it started, I am working in Adobe CC on a file that had been created in CS4 or 5, I believe. When I create a new Adobe CC document, I do not experience the issue immediately, but I don't know exactly what the trigger is for the bug.

I am trying to animate a file in photoshop with vanishing point. And when I "Return 3D layer to photoshop", I'll get a cube with dimensions. It´s not what I can see in tutorials, aperfect 3D space. Using win7.

I am trying to animate a file in photoshop with vanishing point. And when I "Return 3D layer to photoshop", I'll get a cube with dimensions. It´s not what I can see in tutorials, a perfect 3D space. Using win7.

An update -
The libraries appear to all be in tact, now.
The error I am getting,
Parms are; 800/S80/5069660
ERROR - detected an exception: Unexpected database connector error
is a connection issue.
Any ideas??

Photoshop Elements file info font size

The text size in Photoshop elements is rather small. By Text I mean the font size for commands. I can live with it most of the time but when adding text to the File Info field I find it very hard to read and check spellling. Is there any way to increase font size or magnify what one sees. For example in Windows, Control Panel, Display I can adjust the display font size but that seems to have no effect in PE. Any ideas?

Yes, even if you set the UI font size to 200%, that has no effect on the font size of the Information dialog in the editor.
My suggestion is to use the Organizer to input your information. I have set the font size in Windows (not in Elements) to 125% for my 1920 x 1200 24" display.
It's comfortable to input file properties in the Information panel on the right. For the IPTC data, click on the icon with three dots to open the IPTC dialog.

Adobe Photoshop CS6 mouse pointer with black square background

Hello everyone,
can advise on the problem of the mouse pointer? appears with a black square background.
The installation is on a solution Vmware View in vDGA mode, problem does not happen in vSGA mode
Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34 2013/10/24:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: Quadro 4000/PCIe/SSE2

Hi Sardini,
The GPU FAQ clearly talks that the GPU features cant work same as on the virtual drivers like the physcial machine which is why you see the redraw.
Feel free to read the link below which talks about the same.
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html
Thanks
Mandhir

Photoshop CS6 unusable - repeated font warnings - anyone else?

I've been using photoshop CS5.1 for a long time with no problems. I upgraded to CS6 which i'm finding unusable due to repeated font warnings. I get interminable dialog boxes appearing over and over: "Adobe Photoshop CS6.app wants to use the font “xxxxxxx” that was downloaded from the Internet. Allow Adobe Photoshop CS6.app to use this font?"
It starts and stops doing this as i attempt to use PS CS6, and it's not just asking about fonts that are used in the document i have open - it does it for a huge list of fonts. And if i click 'Allow' AND 'don't ask me again for this font' it doesn't remember my choice and will ask again.
Anyone know how to stop it doing this?! I have googled for an answer to no avail.
Thanks
Chris

Here's my solution for CS6 on OSX 10.6.8 using Font Book (so far it's worked!)
From doing some digging around > it's bad practice, supposedly, to install fonts from an external drive
- uninstall user fonts
- copy fonts to folder on local drive
- reinstall from local folder
... since this problem only occured after doing a system re-install and I did "add" my fonts to Font Book via an USB drive, I did what was reccomended ... I'm not sure who's problem it is? Font Book?... but it worked.
see https://discussions.apple.com/thread/4776269?start=0&tstart=0

Photoshop CS3 vanishing point help

i'm having a bit of trouble with the vanishing point filter. this is the first time i've ever really used it to any extent so i must be overlooking something trivial or maybe it's just a program error...
anyway, whats happening is i'm trying to apply art to a box using the vanishing point filter, there is no problem with creating or editing the planes but as soon as i paste the artwork from the clipboard and try to position it to the front of the box it only wraps around two of the planes correctly and the third plane is cut off in an odd location and doesn't match up with the rest of the "box" i can't figure this out and i'm rather unsure what i should do about it seeing as how i've been unable tgo find support for this problem. any help is greatly appriciated. thanks.
-Greg

I think it's how it calcualtes the plane area in relation to the original layer size vs. the "texture" resolution. What if you simply try to do this in multiple steps? I mean, some touchup is inevitable, so why not make it easy on you? The plane setup will remain active during a session, so it should be easy to make the required adjustments...
Mylenium

My 12-point font size looks like 6 point in Mac Mail?

How do I fix this? I do not want to be constantly switching to a different font, then switching back before I hit send

You can set default font sizes for writing and viewing messages.
From the Mail menu bar click Mail > Preferences then select Fonts & Colors.

Photoshop CC vanishing point

Hi fellow DG artists....I have the CC and my vanishing point works once in a while but not at all with regularity. I am never really sure if I am signed in...never a "you are signed in as Donna" notation. I really need the feature for a presentation tomorrow...Anyone have an idea for me? Thankyou in advance...Donna B.

What's happening exactly? Is Vanishing Point just not loading?

Vanishing Point VPE size control

I've looked. Is there a way to control the size of the vpe pngs?
I have a massive file, and would assume that the closer grid objects would at least be a decent size, but everything is getting crushed into a tiny PNG. Is there a preference setting somewhere?
I've tried to change the "save for devices" PNG setting to 1500K, but it hasn't had an effect on the quality of the VPE pngs.

I rendered the measurements to Photoshop but when you do it brings them in so small
you can't read any of the measurements. Anyway to increase this font so you can read it?

How do I get Photoshop CS6 to recognize fonts

I have a number of fonts in my windows fonts folder thast do not appear when I am using PS CS6. I have a bunch of work done on earlier version of PS that use and even need these fonts. I cnannot update the work because the fonts do not appear in the Foints window of CS6. ANy ideas?

What fonts? What exactly did you do to install them?
Mylenium

My Photoshop cs6 makes every font oblique

Hi guys!
As said, my Photoshop makes every font oblique. Not italic, but oblique. So that to make the text straight I have to skew it.
Does anybody know why this happens and how do I solve it?
Thanks!
Francesca

Try resetting the text tool:
Benjamin

How do I change font size from points into pixels?

I used to be able to set font size in points but CS 6 has removed this? Please dont say that points = pixels. They do not. See for yourself. A photoshop doc and an Indesign doc have the same pixel size. A 20 point character "A" in InDesign, will be larger than a 20 pixel character "A" in photoshop. This creates hours of extra work when translating text heavy InDesign documents into Photoshop PSDs. Is there any workaround? Help!

Ok, I know why you dont understand my question. I should have said, that points in InDesign do not equal pixels in HTML (and I should have left Photoshop out of it).
My problem is going directly from InDesign to HTML CSS code. I used to be able to look at the type in my layout sketch in InDesign, select pixels in the units preferences and (assuming I am using the same webfont thanks to google fonts and the @fontface style) the font size would match exactly when I view the webpage in a browser. But now, when I try to code my webpage fonts in pixels, using the value from InDesign's points, fonts sizes dont match when viewed in borwser. This may seem like I am splitting hairs to you but it makes a big difference if I can just look at my InDesign sketch and see the excact size of the type without having to export a tracing/guide image and try to match visually. It just worked when I could see font size in pixles in InDesign in CS 5.5 but does not work in CS 6.
Try a test: make a div in webpage with same pixel size as an InDeisgn doc. Use a defualt font like helvetic that is aval. to both InDesign and your browser. A 20 point word will not match a 20 pixel word in the same font.
Also: I believe I rulled out any font replacment issues. For my designes, I am using the same font in both the InDesign doc and webpage code. I am using google fonts (donloaded for indesign and "link href" in head of code on webpage and/or using the @fontface style).

Photoshop CS6 Font problems

I am experiencing an intermittent problem in Photoshop CS6. I have over 500 fonts loaded on my IMac. I'll be working on a project file and when I go to add text, the drop down menu will only show about a third of my fonts instead of showing the complete list. The only way to correct this problem is to shut down Photoshop and reboot my computer. Most of the time this will give me a menu showing all of the fonts. I have had this Mac for over two yeas and have not had such a problem while using CS5. Is this a bug in Photoshop or do I have other issues ? I have downloaded the latest Photoshop updates.
Equipment: IMac 27 with 3.06 dual core processor and 12 gig of ram. I am running Os 10.6.8.
As this is happening more frequently and has become very frustrating, any help would be appreciated.

Since you already said that you have downloaded the latest Photoshop upgrades (http://www.adobe.com/downloads/updates ), Then I will forward you to the next possible solution.
This would be to turn font preview off in Photoshop's preferences:
In Photoshop CS6:
Choose Type > Font Preview Size.
Select None.
Another solution is to turn off the following fonts:
The following fonts are known to cause problems when used in Photoshop:
Bustle (Mac OS only)
21kannmbn_ttf
GURAKH_S.TTF
JH_TITLES.TTF
SCREEN__.TTF
SEVESBRG.TTF
SF Tattle Tales Condensed.ttF
ZEROGEBI.TTF
Zippy.ttf
Haettenschweiler (Photoshop CS4 when run as a 64-bit application on Windows only)
Finally, another option is to Validate all the fonts through the Font Book Mac Os Application:
If you have a third-party font management program, such as Suitcase Fusion 2, there is sometimes a tool in your application that validates fonts. (For example, Font Doctor ships as a part of Suitcase Fusion 2.) Use this type of application as your first choice.
If you use a tool to validate your fonts, but the problem recurs, it's possible that the tool did not successfully validate your fonts. In this case, follow the steps in Solution 4 below to check for damaged fonts and to reset your font caches.
To validate your fonts through Font Book:
Choose Applications > Font Book.
Choose All Fonts in the Collection column.
Select the top most font in the Font column.
Use the Down Arrow on the keyboard to select the first font, then hold the key down to scroll through all your fonts.
If Font Book crashes, restart Font Book, and scroll through the fonts one by one to determine which font caused the crash.
If you are using Mac OS X (10.5.x), Ctrl-click on any fonts that are problematic, and choose to Disable that font family.
If you are using Mac OS X (10.6.x), Ctrl-click on any fonts that are problematic, and choose to Remove that font family.
I grabbed all these from Adobe Help, which offer a few other options you might want to explore if these don't help you.
http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html
Please Respond if you cant find the resolution above or in the Adobe Help page that I posted above.
-janelle

How to create a new paper size preset in photoshop CS6

Hi, Im trying to create a new paper size preset in PS CS6. I was told if I went to my PS folder, I will find a folder named presets. Inside that folder there should be a text document called "New Doc Sizes.txt" but it's not there.
Has anyone any idea where I might find this text file in a presets folder?
I have a C drive, but my folder for CS6 is on my D drive. I use Windows Ultimate 7 x64.

There's a file named "New Doc Sizes.psp" on my Mac. "Save Preset..." in the "File > New..." dialogue stores custom doc specs in that file.
/Users/<name_deleted>/Library/Preferences/Adobe Photoshop CS6 Settings/New Doc Sizes.psp
There should be an equivalent in Windows.

Photoshop CS6 Vanishing Point Font Size

Similar Messages

Maybe you are looking for