Photoshop does not create reflow data anymore

Hi, i started using Reflow and somehow "generate > reflow project" doesn't quite work anymore.
Photoshop creates "...dataname...-reflow" folder and all the Assets but no project.rflw data is found.
I tried reinstalling photoshop and reflow but it didn't help...
I'm using Mac, Photoshop CC2014, EdgeReflow..

Thank you,
I have checked and found out that the projects have been saved regularly for LP9 until I bought LPX. Thanks a lot
In regards to what you said about where the LPX Backups are stored I can access earlier backups of my project by clicking File > Revert to > Backup 1 ; Backup 2 (as described in the users guide)
even though these two backups are from earlier today
These are the only Backups that I found.
Or maybe then I was not able to locate the correct folder...

Similar Messages

Create data source -- table does not exist in data dict.

Hello Experts,
I'd like some suggestion on creating customized data source in SAP R/3.
First, I created a program for extracting data in to a structure layout and then created an InfoSet to link with that program.
Finally, I chose to create a data source for transaction data using "Extraction from Query".
Once I save the datasource, there was a message like "Table SY does not exist in data dictionary."
I checked that program and InfoSet. I did not found any compile error.
I wonder how I could investigate this kind of error.
I tried to create another InfoSet calling other program and then create a datasource. There was no error.
My first assumption was there is something wrong in the program.
Any suggestion on this would be appreciated.
Thank you very much.
-WJ-

Thanks for your suggestion Pravin.
However, I found the problem already. This is because the package assigned to a program and to a structure layout were different. After I reassigned the correct package name to the structure layout (same package name as assigned to the program), my datasource could be created.
This problem has been resolved.
-WJ-

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha

Getting error "Cannot create a BACPAC from a file that does not contain exported data." from SqlManagementClient.Dac.ImportAsync

We're trying to import a dacpac to azure via the new SqlManagementClient DacOperations ImportAsync api I get an exception with the error: "Cannot create a BACPAC from a file that does not contain exported data."
This same dacpac imports fine using an alternate but less friendly API from sql server's tooling. We'd like to use the new management SDK instead for various reasons.

Hi Kyle A Wilt,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Photoshop does not want to print in color anymore

Since last Friday Photoshop does not want to print in color anymore.
I am working with a Mac OS X 10.7 and a Canon Pixma printer.
When printing from the web the printer prints in color, but when I try to print a picture from Photoshop CC the picture is printed in B&W.
Can any one help me understand what is going on here?
Printer and Photoshop have always printed in color and in grayscale with no major problem till now.

Definitely check your Print settings. If you have more than one tray, they can be set differently from each other. You could be on the wrong tray as determined by your paper settings in Photoshop's Print dialog.
Here is a Help document on this subject.
Troubleshoot printing problems | Photoshop
Two ideas that stand out:
Press the Spacebar on your keyboard before you click File > Print. This process resets printer preferences that have been written into the image.
Reset Preferences: hold down cmd-opt-shift and start Photoshop. Release the keys when the "delete photoshop settings file" dialog appears and click "Yes".

Any idea what this errorr means? the data type of the reference does not match the data type of the variable

I am using Veristand 2014, Scan Engine and EtherCat Custom Device. I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.
I created a new Veristand project
I added the Scan Engine and EtherCat custom device.
I changed the IP address and auto-detected my modules
i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
Any thoughts?
Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Preparing to synchronize with targets...
• Querying the active System Definition file from the targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.
• Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Preparing to deploy the System Definition to the targets...
• Compiling the System Definition file...
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Sending reset command to all targets...
• Preparing to deploy files to the targets...
• Starting download for target Controller...
• Opening FTP session to IP 10.12.0.48...
• Processing Action on Deploy VIs...
• Setting target scan rate to 10000 (uSec)... Done.
• Gathering target dependency files...
• Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
• Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
• Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
• Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
• Closing FTP session...
• Files successfully deployed to the targets.
• Starting deployment group 1...
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: The data type of the reference does not match the data type of the variable.
=========================
NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
• Sending reset command to all targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.

Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef? I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).
Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671
Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
Kevin W.
Applications Engineer
National Instruments

"BP Category 1 does not fit the data in category 2" "Replies Appreciated"

Hi Gurus,
When i am trying to create an "Individual Account" in UI, I am getting the error "BP Category 1 does not fit the data in category 2".
If i try to create a "group" then it says "BP Category 3 does not fit the data in category 2".
It allows me to create only "Corporate Account" i..e. Category 2.
What should i do to create "Individual Account" and "Group". (Category1 & Category 3).
Individual Account (Category 1) - "BP Category 1 does not fit the data in category 2".
Corporate Account (Category 2) - Able to create only Corporate Account
Group (Category 3) - "BP Category 3 does not fit the data in category 2".
Thanks & Regards
Rohan

Hi Rohan,
Hope this SAP Note : 1232459, Solves your problem.
You might have created a custom configuration for corporate accounts.
Unfortunately in case of custom configurations exist, they are selected with higher priority.
So in this case the configuration for corporate accounts is also shown for individual accounts,
this causes error.
In order to solve this problem, create a custom configuration for individual account also,
i.e for view BP_HEAD/AccountDetails. Object type BP_ACCOUNT and object subtype INDIVIDUAL.
Please make sure that the custom configuration includes the fields firstname and lastname for
persons instead of name1 and name2 which are only allowed for corporate accounts.
I hope the above information resolves your problem.
Best Regards
Shiven

Error: 'BP category 1 does not fit the data in category 2'

Hi,
            i have written a program to create a contact person and the code for it is pasted below...when i run this program i get nothing but this message in the status bar 'BP category 1 does not fit the data in category 2'...can someone tell me wht the error means and y it is coming.
thanks:)
pushpa
*table for storing the line by line records in the excel file
TYPES: BEGIN OF TTAB,
        REC(1000) TYPE C,
       END OF TTAB.
DATA ITAB TYPE TABLE OF TTAB WITH HEADER LINE.
*variable for storing the name of the excel file to be uploaded
DATA UP_FILE TYPE STRING.
*data to be uploaded
TYPES: BEGIN OF TDAT,
        FLD1 TYPE BAPIBUS1006_CENTRAL_ORGAN-NAME1,
        FLD2 TYPE BAPIBUS1006_ADDRESS-STREET,
        FLD3 TYPE BAPIBUS1006_ADDRESS-CITY,
        FLD4 TYPE BAPIBUS1006_ADDRESS-REGION,
        FLD5 TYPE BAPIBUS1006_ADDRESS-POSTL_COD1,
        FLD6 TYPE BAPIBUS1006_ADDRESS-COUNTRY,
        FLD7 TYPE BAPIBUS1006_CENTRAL-PARTNEREXTERNAL,
       END OF TDAT.
DATA IDAT TYPE TABLE OF TDAT WITH HEADER LINE.
DATA: BUSINESSPARTNER TYPE BAPIBUS1006_HEAD-BPARTNER,
      CENTRALDATA TYPE BAPIBUS1006_CENTRAL,
      ORGANIZATION TYPE BAPIBUS1006_CENTRAL_ORGAN,
      ADDRESS TYPE BAPIBUS1006_ADDRESS,
      BAPIRETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
PARAMETERS P_FILE TYPE LOCALFILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      STATIC    = 'X'
    CHANGING
      FILE_NAME = P_FILE.
START-OF-SELECTION.
UP_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = UP_FILE
    TABLES
      DATA_TAB                = ITAB
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
*writing out the contents of the internal table itab
LOOP AT ITAB.
    WRITE:/ ITAB-REC.
    CLEAR IDAT.
    SPLIT ITAB-REC AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
                INTO IDAT-FLD1 IDAT-FLD2 IDAT-FLD3 IDAT-FLD4 IDAT-FLD5 IDAT-FLD6 IDAT-FLD7.
    APPEND IDAT.
ENDLOOP.
LOOP AT IDAT.
    MOVE: IDAT-FLD1 TO ORGANIZATION-NAME1,
          IDAT-FLD2 TO ADDRESS-STREET,
          IDAT-FLD3 TO ADDRESS-CITY,
          IDAT-FLD4 TO ADDRESS-REGION,
          IDAT-FLD5 TO ADDRESS-POSTL_COD1,
          IDAT-FLD6 TO ADDRESS-COUNTRY,
          IDAT-FLD7 TO CENTRALDATA-PARTNEREXTERNAL,
          '0001' TO CENTRALDATA-PARTNERTYPE.
    CALL FUNCTION 'BAPI_BUPA_CREATE_FROM_DATA'
      EXPORTING
        PARTNERCATEGORY         = '1'
        CENTRALDATA             = CENTRALDATA
        CENTRALDATAORGANIZATION = ORGANIZATION
        ADDRESSDATA             = ADDRESS
      IMPORTING
        BUSINESSPARTNER         = BUSINESSPARTNER
      TABLES
        RETURN                  = BAPIRETURN.
    IF BAPIRETURN IS NOT INITIAL.
      READ TABLE BAPIRETURN INDEX 1.
      MESSAGE
        ID BAPIRETURN-ID
        TYPE BAPIRETURN-TYPE
        NUMBER BAPIRETURN-NUMBER
        WITH BAPIRETURN-MESSAGE_V1
        BAPIRETURN-MESSAGE_V2
        BAPIRETURN-MESSAGE_V3
        BAPIRETURN-MESSAGE_V4.
      EXIT.
    ENDIF.
    REFRESH BAPIRETURN.
    CLEAR BAPIRETURN.
    CALL FUNCTION 'BAPI_BUPA_ROLE_ADD'
      EXPORTING
      BUSINESSPARTNER = BUSINESSPARTNER
      BUSINESSPARTNERROLE = 'BUP001'
      DIFFERENTIATIONTYPEVALUE =
      TABLES
      RETURN = BAPIRETURN.
    IF BAPIRETURN IS NOT INITIAL.
      READ TABLE BAPIRETURN INDEX 1.
      MESSAGE
        ID BAPIRETURN-ID
        TYPE BAPIRETURN-TYPE
        NUMBER BAPIRETURN-NUMBER
        WITH BAPIRETURN-MESSAGE_V1
        BAPIRETURN-MESSAGE_V2
        BAPIRETURN-MESSAGE_V3
        BAPIRETURN-MESSAGE_V4.
      EXIT.
    ENDIF.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    WRITE:/ 'Business Partner ID:', BUSINESSPARTNER.
ENDLOOP.

Hi Pushpa,
         you can use following code to create relationships using BAPI. In this Business partner is organisatin. contact persion paramenter is person. other information related to relationship details
CALL FUNCTION 'BAPI_BUPR_CONTP_CREATE'
    EXPORTING
      BUSINESSPARTNER           = SEARCH_PARTNER
      CONTACTPERSON             = CONTACT_SAP
VALIDFROMDATE             = '00010101'
VALIDUNTILDATE            = '99991231'
DEFAULTRELATIONSHIP       =
ADDRESSGUID               =
      CENTRALDATA             = WA_CENTRAL_DATA
      ADDRESSDATA             = WA_ADDR_DATA
      TABLES
    BAPIADTEL                 = I_TEL_DATA
    BAPIADFAX                 = I_FAX_DATA
BAPIADTTX                 =
BAPIADTLX                 =
    BAPIADSMTP                = I_EMAIL_DATA
BAPIADRML                 =
BAPIADX400                =
BAPIADRFC                 =
BAPIADPRT                 =
BAPIADSSF                 =
BAPIADURI                 =
BAPIADPAG                 =
BAPIAD_REM                =
BAPICOMREM                =
     RETURN                    = I_RETURN
hope this will help you
Siva

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

Importing clips from iMovie HD does not preserve capture date

Hi,
I am importing iMovie HD projects into iMovie 09.
The clips in iMovie HD (originally imported from DV) have the correct capture date/time on them.
However, when I import these clips into iMovie 09, it does not preserve these dates for the events but instead chooses to use the "file create date/time" as the event date time.
Is this info lost forever in iMovie 09 or is there some setting that can use the original clip capture date info as the event date/time?
Thanks.

Hi,
I am importing iMovie HD projects into iMovie 09.
The clips in iMovie HD (originally imported from DV) have the correct capture date/time on them.
However, when I import these clips into iMovie 09, it does not preserve these dates for the events but instead chooses to use the "file create date/time" as the event date time.
Is this info lost forever in iMovie 09 or is there some setting that can use the original clip capture date info as the event date/time?
Thanks.

MRP does not creates Shcedule Line

I have a valid scheduling agreement LPA in place. Scheduling Agreement is approved and released status.
I have source list also maintained for same scheduling agreement with long validity and MRP indicator as 2 - Create Schedule line automatically.
I am running MRP using following parameters in MD02.
Processing key          NETCH               Net Change in Total Horizon
Create purchase req.    3                   Planned orders
Delivery schedules      3                   Schedule lines
Create MRP list         1                   MRP list
Planning mode           3                   Delete and recreate planning data
Scheduling              2                   Lead Time Scheduling and Capacity Planni
Even schedule line and other parameters maintained properly, MRP creates planned order and does not creates Schedule Line automatically. Material Master is maintained MRP Type PD, Lot Size as Replenishment to maximum stock level, Safety stock, No strategy and availability on.
What I am doing wrong? With same setting in other system it is working perfectly fine.
Any feedback appreciated.
Thanks
PP

Hi
Check whether the Agreement Open Target value .
If the target quantity was completed . so system will not create the Schedule lines for the material
2. If you mainatian the open period in the smk.
so system will create the planned order instead of schedule agreement. check

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel

Payment Wizard Does not create the File

Hi I am trying to run the payment wizard and in the final step it says it ran successful and create the outgoing payments but it does not create the payment file for the bank.
Step 1
            Start a new Payment run
Step 2
           payment type : out going
           payment method : bank transfer
           File Path : Go to Desktop and file name is test
Step3
          Select the business partner
Step 4
         Select the date range
Step 5
        Select the payment method
Step 6
        Select the Invoices
Step 7
        Execute
It says successfully Executed the payment and create outgoing payment for the business partner.
But it does not create the payment file (test in the Desktop)
Please help me!!!
Thanks
Sanjaya

Hi Sanjaya,
Check the link
Payment Wizard
Payment Wizard Run does not create Payment/Check
Payment Wizard/Engine - creation of Bank File
*Close the thread if issue solved.
Regards
Jambulingam.P

Photoshop does not create reflow data anymore

Similar Messages

Maybe you are looking for