Photoshop does not open the requested file

Hi,
I installed the cs5 fxg ext. with extension manager on Mac OS X 10.6.3.
I think that went ok.
But... In catalyst (cs5) I have imported a jpeg file and want to edit it with photoshop. Catalyst gives the message "editing selection in photoshop jadaa jadaa"
It starts photoshop, but my picture is not opened in photoshop (also cs5)...
What's wrong?

I have the exact same problem...

Similar Messages

Edit in Photoshop CS4... does not open the selected file.

Sorry if this is an old topic, but I can not seem to find the answer and I was hoping someone here might know.
When in Lightroom (2.2 or 2.3) if I select "Edit in Photoshop CS4..." or any of those dropdown commands, Photoshop opens....and that is it. The selected photo from Lightroom is NOT opened/merged/panoramaized. duuh. frustrating.
So I re-installed Lightroom, updated to the 2.3, re-installed CS4. all with the same effect that Photoshop opens, but the selected file is NOT opened.
Has anyone experienced this? Any solutions?
Thanks in advance.

When you remove the obvious,
that which is left must therefore be the truth -- Sherlock Holmes
Short version:
When I created a new lightroom catalog, and imported a single, standalone file, It worked fine. But when I imported to the new catalog, any photos from my existing catalog, it would fail.
Turns out that I was doing something a bit out of the ordinary with the IPTC Copyright field. In order to make my copyright information look "different" when I would export a file.
One would normally put in that field something like "© 2009 someone". I discovered a few months ago that I could make this field display as a multi line entry.
ie.
if you wanted to put XY into the copyright field, but wanted it to display as:
X
Y
all you would have to do is to put a carrage return between the two characters. (hint ctl^enter). Now when you displayed the "copyright" in an output file, it will display
vertically instead of all the characters in a horizontal line.
After being frustrated by this for a couple of weeks, I simply started removing every option that I might have applied to photographs that I would import with Lightroom. One of the last ones was the "vertical" information I put in the copyright field in a Preset. (when you remove the obvious...).
Funny thing is that no program really cares about the formatting of that field, or if it has multiple lines in the data, or special characters.......It even opens up just fine in Photoshop / Gimp / PSE / etc. with no problems.
But, if you have multiple lines of data in the Copyright Field (and I suspect others as well),
AND you want to open up the file from Lightroom in Photoshop, using the standard menu item of " Edit with Photoshop CS4", for some reason Photoshop will start, but never open the designated file. I would expect some parsing something just giving up after it encounters a CR.
But.....All is well that ends well. Now I can quit obsessing, and move on to something else...
Best,
Jim

Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my Canon Mark III 5D Camera.

Adobe Lightroom, Photoshop and Bridge does not recognize the raw files from my new Canon Mark III 5D Camera. How can I get my files open to view and edit? I am using LR3, Photoshop CS3 and Bridge CS3. Do I need to upgrade these programs or is there another way to get these programs to recognize my files?
When I try opening the raw images in Lightroom, the thumbnails say "Preview unavailable for this file" ... when I click "import" an error message pops up that says "The files are from a camera which is not recognized by the raw format support in Lightroom."
When I try opening the raw images in Photoshop, an error message pops up saying "could not complete your request because photoshop does not recognize this type of file."
When I try opening the raw images in Bridge, it just shows an icon with the file name and CR2.
Please help!!!

Unless I missed an announcement, today, LR6 isn't available, yet, right? Only Adobe employees and beta testers would know what LR6 does differently at this point and they're all sworn to secrecy.
LR5 is available as a standalone version.
PS-CS6 is available as a serial-number-licensed version.
PS-CC + LR5 are also available as a Photography Plan subscription for $10/month with a minimum OS versions of OSX 10.7 (and probably 10.8, soon) and Windows 7.
Bridge is part of PS, not a separate program.
LR5 standalone and LR+PS-CC plan are both available on this page: http://www.adobe.com/products/catalog/software.html
PS-CS6 can be found on this page: Creative Suite 6 which can be found by searching www.adobe.com for Photoshop CS6 and clicking the Buy link in the on-the-fly search results.
As with any new Adobe software, it might be wise to run it in trial mode for a few days/weeks to see if it works well with your computer, before purchasing and finding out you might need a new computer, first.

Downloaded photoshop CS6 to my new iMac. Opened photoshop but can't bring in a photo from iPhoto - get message that says photoshop does not recognize this type file. Suggestions?

I donwloaded photoshop CS6 to my new iMac. Opened photoshop but cannot openn a photo from iPhoto library - I get a message that says cannot complete our request becausse photoshop does not recognize this type file.
Suggestions?
Rick

You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?

I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?

Familiarize yourself with these tables
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Camera Raw-compatible Adobe applications
The E-M1 was first supported by Camera Raw 8.3 which is only compatible with CS6 and CC. It is not compatible with CS5 or lower and never will be.
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all the Raw E-M1 files to DNGs then edit the DNGs in CS5
Camera raw, DNG | Adobe Photoshop CC

Lightroom 5 does not import the GPS-files taken by the Sony A77. When i open the Bridge, there i can see them correctly. Can you help me? Thank´s a lot!

Lightroom 5 does not import the GPS-files taken by the Sony A77. When i open the Bridge, there i can see them correctly. Can you help me? Thank´s a lot!

Deleting this discussion as it is a duplicate of Hello: I am using OSX 10.9.3 Lightroom Version 5.4 Camera Sony A77...Problem: importing the foots form chip or from the camera the GPS-position is not shown in lightroom. Using the bridge there they are. What have I do do? Thanks

Photoshop will not open/create new files, cannot resize images etc

Hi to all.
So I'll start with the basics; I am using Photoshop 7 (And yes, I am using it for a specific reason, I'm not interested in migrating to this new $1000 Creative Cloud rubbish), us Australians are getting ripped a new one and I'm happy with the $50 I paid for my copy years ago. (Please do not tell me the answer to my problems is to simply upgrade and go bankrupt. Again, I've been using 7 for a very long time without issue).
I've been using 7 for almost a decade without issue. I stick with it because so far, it's done everything I need, has been reliable up to this point, and my plugins do not work properly with newer versions. I'm also running an older-spec system (Windows XP, 3gb ram etc) as I do a lot of work with older game engines, Source Engine etc.
The issue I'm having doesn't appear to be Photoshop-7 specific however, there are many threads on this that have gone unanswered, and happen in CS3 etc and modern copies as well. I have uninstalled and reinstalled it to no avail. Basically, I cannot open files reliably with it.
If I right click any image file in explorer and click "open with -> Photoshop", photoshop will launch, however it does not open the file. I double checked to ensure the file was not just opening offscreen, however it is definitely not opening at all (as the "close" option does not become available).
If I launch photoshop manually, and click file -> open -> It will open that file, HOWEVER it will not open any more files after that.
It also is very very fickle with simple commands, such as if I hit CTRL + T to go into transform mode and then try to rescale an image, I have to click and drag the corners at least 5-6 times before it will recognize that I am doing so, and it will also ignore the resize that I perform and snap back to normal. Sometimes I have to click things more than once to get them to register. This is not occurring with any other piece of software etc, so I've ruled out that it's an issue with my mouse.
This has only been happening a day, and I cannot think of any particular system changes likely to result in this (ie no abnormal plugins installed recently, no major hardware or software changes). Unless my keyboard has a stuck key or something strange, I'm absolutely at a loss
Is there anyone who can help me, or has heard of this issue?

I am an idiot.
I guess the scratch disk was full or something else. A simple reboot appears to have solved the problem. (I often have my system running for up to 48-64 hours at a time without reboots) as my workdays are around 36 hours at a time, so it could just be a memory constraint from XP.
Hopefully this solves the issue for anyone else who encounters it. Reboot your pc once in a while, give it a clean slate of memory to work with.

When I click the Editor, it loads but does not open the Editor page. Options?

When I click the Editor, it loads but does not open the Editor page. Options?

Try making separate desktop icons for the Editor and Organizer. You can then launch directly. The standard desktop icon is for the welcome screen which often runs in the background or doesn’t shut down properly.
Start by right-clicking on the desktop and select:
New >> Shortcut
Then browse to:
C:\Program Files\Adobe\Photoshop Elements 13
Inside the Photoshop Elements 13 folder make sure you select the application (not a shortcut) by scrolling down to the files beginning with the letter P and highlighting ‘PhotoshopElementsEditor’
Then click next followed by finish.
You can repeat for the Organizer using the different file path.
New >> Shortcut
Then browse to:
C:\Program Files\Adobe\Elements 13 Organizer
Highlight ‘PhotoshopElementsOrganizer’
Then click next, followed by finish.
Now that you have your separate desktop icons you can delete the one for the welcome screen, if preferred. On Mac try launching directly from Applications. [if not using PSE13 substitute your own version and go to Program Files (x86)]

Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a

Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there are no updates

Hi,
CS6
Van: R_Kelly [email protected]
Verzonden: maandag 16 september 2013 18:42
Aan: Hans van Sloten
Onderwerp: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
Re: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
created by R_Kelly <http://forums.adobe.com/people/R_Kelly> in Photoshop for Beginners - View the full discussion <http://forums.adobe.com/message/5686078#5686078

Left click on a link does not open the link; a small blue window opens saying loading then closes.

Left click on any link in a web page does not open the link. A very small blue window appears with the word loading and a few moving dots. In a few seconds the blue window closes but the link does not open. Links used to open. If I right click the link, I can open the link in a new window. Many new windows pile up. This is a nuisance.
I am using Firefox 3.6.8 for Canonical 1.0 in Ubuntu 9.10.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Finder does not open when a file passes over (mac os X 10.8.3)

Just installed mac os 10.8.3 mountain lion. As such, it seems with this OS X version the "finder" does not open when a file passes over (in order to move it from desktop).
The screen dims a little and nothing else happens.
How can I recover the "finder" functionality that apparently doesn not exist anymore?
Is it something wrong that I am doing?
Regards
José

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

My Organizer can not open the catalog file it crash down.

My Organizer can not open the catalog file it crash down.

OS X Yosemite And PSE 13
2015-01-16 8:24 GMT+01:00 Anwesha Dev Chaudhary <[email protected]>:
My Organizer can not open the catalog file it crash down. created by Anwesha
Dev Chaudhary <https://forums.adobe.com/people/AnweshaDevChaudhary> in *Photoshop
Elements* - View the full discussion
<https://forums.adobe.com/message/7101754#7101754>

Using office outlook under parallel desktop double click on an Excel attachement does not open the document in Excel

using office outlook under parallel desktop double click on an Excel attachement does not open the document in Excel.
double-click opens Excel Office 2011 for mac without the document.
It should open the document in Excel 2010 for Windows.

In Parralells, choose the file you want to open.
Right Click on it and choose Properties.
In the General Tab you will see "Opens with:"
Click the "Change ... " button.
Then choose Excel 2010. The checkbox below should be set to "Always use ... "

Does not open the application tab

does not open the application tab
http://adobe.ly/1h3Ng0c
How resolve???

Hello SnNick,
Rename the opm.db file.
Close the Creative Cloud application if it's running.
Navigate to the OOBE folder.
Windows: [System drive]:\Users\[username]\AppData\Local\Adobe\OOBE
Mac OS: /User/<username>/Library/Application Support/Adobe/OOBE folder
Rename the opm.db file to opm_old.db
Launch Creative Cloud
Make sure that you unhide the hidden files of your computer or else you will not fir "AppData" folder.
Do let me knew if it worked or not.
Regards,
Ratandeep Arora

CS5 The selected file cannot be linked because its type (audio) does not match the original file's t

Greetings,
I have been working on a very large project using CS5 on my desktop computer. Now I am on the road and bought a laptop so that I can continue to work. I placed all of my assets on a back-up external 2tb drive (which I was able to open without incident on my desktop). I installed CS5 on my new laptop and now when I try to open the project I get the following message "The selected file cannot be linked because its type (audio) does not match the original file's type (audio and video)". This message appears before I indicate the path to any of the assets. Then, when I do indicate the path to each asset, I get the same message for individual files.
Any advice is appreciated.
Thanks,
Jeremy

I had this problem and have found a solution / workaround: my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage. The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues. Any sequences with that footage will now work and everything show be all good.
You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
good luck!

Photoshop does not open the requested file

Similar Messages

Maybe you are looking for