Photoshop does not recognise scanner

Hello
Photoshop Elements 10 does not recognise scanner that works correctly when used directly.
How can I solve the problem?
Best regards - Studi1

Hello hatstead
Thank you for your tip. It did not work out.
- You indicate the folder name for the TWAIN plug-ins to be moved.
-- The name corresponds to PhotoShop Elements 9.
-- I am working presently with PhotoShop Elements 10. And the name seams not to correspond.
- Do you have a hint how to solve the problem?
Best regards - Studi1

Similar Messages

Photoshop does not see scanner...can't import scanned images

I recently migrated from Windowx XP (32 bit) to Windows 7 (64bit). On the xp computer, I installed the driver for my epson V500 photo scanner, and when go to File--> Import, there is an option to import via espon scanner. However, in Window 7, with Photoshop CS4 64 bit installed, the installed scanner does not show up on the import menu. I don't know how to get it to see the scanner as it does on my XP machine. I tried copying the photoshop plugins/import-export folder from the xp machine to photoshop (64)/plugind/import-export folder, but that didn't make a difference.
I really need the scanner to be visible inside photoshop. Any help would be greatly appreciated.
Thanks.

If you are talking about 64 bit TWAIN there is none, and probalby will never be one. Too many techincal problems.
Most advise you scan with the scanner software and save to a location. Many like this better as it does not tie up PS when scanning.

CS3 Photoshop Does Not See Scanner

I am running 10.7.5 Intel Core i5. Before I zapped my PRAM, I used to be able to go to> Import and choose EPSON Perfection V33/V330… and now I get a message that says: CS3 Photoshop -- Could not complete the import command because there is no scanner installed. What the heck did I do to get it going the first time? Vue Scan Twain is giving me the color beach ball of death. Whining :- o I like to scan in photoshop and have the scanned file open directly.

Try Preview or Image Capture to see if scan is working.
File > Import from scanner....

Photoshop does not recognise my epson 9800 printer

I've been using CS6 for a long time(Years) with my Epson 9800 printer without any problems. Today between two prints it now comes up with an error message. Anybody else have this problem?

Dear alderman,
Yes, I had a problem too, but with a different Epson printer and while trying to print from an Adobe PDF file. No error message, just NOTHING! The problem started after I installed the latest Epson update. The print jobs would just keep stacking up and not print. After many tries I finally got everything working again by printing something from my Pages application that did not come from an Adobe PDF file…that seemed to get everything working again. Going into the System Preferences on my Mac (10.7.5) and deleting jobs, restarting the printer, etc., did not seem to help, but printing from Pages (or another word processing application) did the trick. You might try it.

Photoshop CS3 does not recognise gif or png

When trying to open a gif or png, I receive the message:
"Could not complete your request because Photoshop does not recognise this type of file"
I am running CS3 and have just added the 10.5.3 update.

I have a similar problem that suddenly appeared. When properly working, I can save a tif file as a jpeg (or other)and the tag "tiff" will switch to "jpg" in the save description. That does not work anymore. A same example is when I save a Photoshop document as a "tif" or "jpg" or "png," the save description does not change any more to the appropriate form. Meaning, if I took a document named "Mydoc.psd" and tried to save it as a "jpg," I would scroll in the "Format" bar down to "JPEG." BUT, the title of the document will remain as "Mydco.psd." When I try to open it by double-clicking on it, Photoshop will not recognize it. I must open it thru Photoshop only.
Got recommendations?
Thanks anyone.

Since upgrading my Macbook pro with Yosemite, I have problem with my Xerox Work Centre 3045 - the printer works normally but it does not recognise the scanner, can you help with this?

Since upgrading my Mac book pro with Yosemite, I have problems with my Xerox Work Centre 3045 printer. The printer works normally but it does not recognise scanner, I can not scan anything. Can you help?

Open Disk Utility and select your hard drive, then Repair Permissions, it will probably return a very large number of errors, primarily printer and library errors, so run it a second time. Then restart the MacBook Pro. If it still will not scan, try using Image Capture from Finder > Applications and see if that will work. If not, contact Xerox about updated drivers.

Have Photoshop Elements 12, recently purchased Epson Workforce WF-7620 Printer/scanner , cannot import scanned pictures into Photoshop, does not see the Printer/scanner.

How can I get my Photoshop Elements 12 to import scanned images from my Epson Workforce WF-7620 ?. The program does not recognise the Priner/scanner.
Bruce

Is it trying to get you to join photoshop.com? The easiest way around that is not to use the welcome screen. Go into the program files and make direct shortcuts for the organizer and/or editor and start PSE that way from now on. Photoshop.com is dead and gone so the welcome screen will hang up trying to connect to something that no longer exists.

Hi, trying to reinstall my adobe photoshop and premier on computer the adobe download does not recognise the serial nos that i have that are in my adobe account.thanks,gem

trying to reinstall my adobe photoshop and premier on computer the adobe download does not recognise the serial nos that i have that are in my adobe account.thanks,gem

Here are a couple links that might help
Error "The serial number is not valid for this product" | Creative Suite
Creative Cloud applications ask for serial number
And try using this cleaner
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Now have OSX 10.8.2. cannot update my HP Scanjet software. Have downloaded a patch from the HP site, but my MacBook will not open it as it says it does not recognise HP as an apple compatible compnay. Any advise?

I have just plugged in my scanner (HP Scanjet G2710) however my old HP Scan software will not opne. I have found a patch on the HP site which may fic the problem (although it only sesm to go up to OSX 10.7) and having donaloaded the patch my Mac will not opne or deal with the software as it now tells me it does not recognise HP as an Apple affiliated compnay. Any help / suggestions? I don't really want to buy another scanner...

Hi,
By reading your notes I assume you didn't uninstalled the HP Software and installed the latest v10.6 software available online, any previous version will not work regardless the patch installation as it was not signed.
Be sure to follow the directions listed in here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03428470 #A3
The latest software can be downoad from here:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=15179&prodSeriesId=3423844&prodNameId=3423845&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=sj-78355-5
Then you should reinstall the patch:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=15179&prodSeriesId=3423844&prodNameId=3423845&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=cs-97791-1
Hope that helps,
Shlomi

Aperture does not recognise TIF files from Nikon CoolScan

The TIF files from my Coolscan are good in every other application, but Aperture does not recognise them. I've tried re-saving the TIFs as JPG and PDS but Aperture doesn't recognise any file generated from the TIF. Maybe it's something to do with the scanner driver? Any ideas how to load these files into Aperture?

You might check the color space that is assigned to the files. If you are using Nikon Scan software to manage your CoolScan, there is a preference for setting the color space of the saved file. FWIW, Nikon CoolScan .nef files are a 'raw' file, not camera raw, that was/is a Nikon proprietary format for their scans. If you use the Nikon Scan for image editing, the edits are non-destructive in saved files and can be adjusted by re-opening the file in NS. Adobe first made editing camera raw available in early 2003 and the Nikon format preceded that. Nikon's camera raw format also has the .nef extension, but is not the same as the CoolScan .nef-- really confusing. I suggested checking the color space, because Nikon has different internal names for Adobe RGB(1988) as well as their own Wide Gamut space.
All said, I've not had a problem opening .tif scan files in Aperture.

CS5 Bridge does not recognise Nikon D 800 Raw Files

I have Photoshop CS5 Version 12.0 (x64). Photoshop recognises Nikon D 800 Raw files BUT
Bridge does not. I have tried updates but my Apple Mac Pro does not recognise them

That would mean that you have the ACR plug-in version 6.7 or 7.1 in the wrong place.
You can only have one version of ACR anywhere in your installation. If you have two, it won't work. Look for the version(s) you have installed in Photoshop under the Photoshop menu > About Plug-In:
Your camera has been supported ever since ACR 6.7 and CS5 can run ACR 7.1 (but not any higher version of ACR).
The only correct path for the plug-in in CS5 is as follows:
Very wide image: click on thumbnail for larger view.
NOTE that the path starts with the ROOT LEVEL Library, the one right after the name of your boot drive, not your user or Home Library.
The screen shot is from an installation under Snow Leopard, where I had CS5.

I have an OS X 10.9.1 It does not recognise Epson Scan 3.7.9F0

I have an OS X 10.9.1 It does not recognise Epson Scan 3.7.9F0

The Epson web site shows the latest version for Mavericks appears to be 4.0.0.1
Have you checked that your scanner is compatible with Mavericks?

IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"

Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.

I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!

I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?

I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
Please can anybody help.
Cheers,
Dan_nz.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

I changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

i changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?

In your case you can only restore from a backup that has been created with the same iOS version. An iPhone 4 can only run 7.1.2, and, unless your iPhone 5 did not run the same version, you can't use a newer iOS backup of the 5 on the iPhone 4

Photoshop does not recognise scanner

Similar Messages

Maybe you are looking for