Photoshop does not show Image after converting to sRGB

Hey,
i just got a new Eizo Coloredge Monitor which i conectetd to my Macintosh.
Everything seems to be fine actually. But when i´m converting an Image from Pro Photo to sRGB for instance... the Photoshop Window does just show a black window.
I think it is just some kinda new function or some kinda Colorspace warning, but i just dont get around it and don´t really know what this means..
Can someone help me .. or maybe had the same problem??
best,
max

Are you stating when you use edit Convert to Profile abe in the convert dialog you check preview the change the profile to convert to different profiles like sRGB or sgray and others that you see a black image window with no image in it?

Similar Messages

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

It is hard to exactly understand what you have done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
Updating a Chart Copied from a Numbers Document
If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
Select the chart on the page and click the Refresh button that appears.
Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
I hope it has helped you.

LR5 - Watermark does not show up after exporting...??

Does not show up after exporting...?? Any ideas???

ccherrry wrote:
Any ideas???
Yeah, provide some details.
Version 5.0 or 5.2RC?
Mac? PC?
Simple Watermark?
Watermark Editor Created? Text-based? Graphic-Based
Export format?

Background for site does not show up after uploading to webhost...

My background for my website does not show up on my webhost after uploading site with Dreamweaver.
Here is my site: http://legacyofys.comxa.com/
Here is the backgroud image: http://point-file-manager.000webhost.com/index.php?ftpserver=legacyofys.comxa.com&ftpserve rport=21&username=a2022293&language=en&skin=blue&ftpmode=automatic&passivemode=no&sslconne ct=no&viewmode=list&sort=&sortorder=&state=view&state2=image&directory=%2Fpublic_html%2Fim ages&entry=Background.png
I know the background image successfully uploaded to my webhost, because it shows up in my file manager. What is wrong here? How do I fix this?

So it was a path issue :-) Glad you sorted it .
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

Muse 7.0 plus Chrome: browser does not show images full browser width

Hi there,
I have a serious problem with the latest Muse version: the images which I use as parallax-masks for the background won't work with Chrome, though Safari and Firefox are not showing any problems. The issue: Chrome does either not scale the images to 100% browser-width or does not show them at all, or even shows the images cut into narrow stripes. This problem did not show in the previous version of Muse.
Of course I already restarted application and computer. System: Mac OSX Mavericks.
What to do now? The presentation with the client is very soon and this bug makes me very nervous.
Best,
bartl

The problem bartl encountered and reported was fixed by the 7.1 release (November 21st). The problem you're describing sounds different.
As of yet, I'm unable to reproduce what you're describing. The URL you've provided views the same in all the browsers I've tried, Chrome (32.0.1700.77) and non-Chrome, Mac and Windows.
That said, looking at your master page I don't think you've created what you intended. At present there are two full screen slideshows on your A-master. On contains no images and the other contains a single image. Both are set to have thumbnails and the thumbnails container is off the right side of the page.
If you look at your "Master Slideshow" layer in the Layers panel, you'll see the two slideshows. I think you'll want to delete one of them and, given your design, turn off thumbnails for the remaining one.
Also, if you don't plan to have multiple images in the full screen slideshow, you'd be better off using a background fill image rather than the slideshow widget.
I remain a bit puzzled how/why you're seeing different behavior in your instance of Chrome. Have you cleared your browser cache?
On an unrelated note, if you set the page fill and stroke to none and set the browser fill to the most common color from the garage door image, it will avoid the momentary appearance of a white page on a grey background when your home page first loads. Instead the site visitor would see a blank page that's the most common color from the slideshow image, until that image loads.

FF5 does not show images that are 'moved permanently' (http response 301)

Our web app shows maps from OpenStreetmap. The webapp is secure, that is, is uses HTTPS. Now, IE complains horribly when the web page tries to load <img> via HTTP, because it's mixed content that that is considered baad.
So our webapp serves the images by responding via HTTPS with a 301 (moved permanently) to the real OpenStreetmap URL (with is HTTP). That fools IE to not complain.
Now, Firefox 5 suddenly does not show the map images AT ALL. This has worked beautifully with previous version (and all other browsers).
What's wrong?

I fixed the problem. (YAY!)
It was the way I embedded the files -- the Dreamweaver default does not work properly so I used the embed from this generator: http://www.bobbyvandersluis.com/swfobject/generator/index.html#alternativeContentHelp which now lets my navbar and swfobjects load properly. I also made sure that my slideshow (loader.swf) was set with wmode = opaque while the navbar is set to wmode = transparent. The div for the nav bar has z-index set to 5 while the div for the slideshow has z-index set to 1. Both have absolute positioning. I hope this helps anyone in the future that has trouble with overlaying flash (.swf) files.
Thanks for your reply and trying to help me solve this issue!

Mail does not show images anymore server stopped responding on my iPad 2 when attempting to browse web

Over the last couple of days my ipad 2 has started to play up. First the mail would not show images in mail then when trying to browse the web it now will not open any pages. I have attempted a wipe & reload but still no difference.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

The new value of bind variable does not show up after changed by PL/SQL

Hi,
I am running APEX 3.2. I use PL/SQL process to assign a new value to a bind variable, say, :P2_TEST := 123. The new value does not show up on the page although I can see it in the Session status.
How can I make the new value to be displayed on the page immediately after the process is run?
Kind regards,
Tee

Maybe you could use an ajax routine to refresh the item in your pl/sql routine?
Thank you,
Tony Miller
Webster, TX

Ibook g3 hard drive does not show up after new installation

I have an older ibook g3. I purchased a 20gb hard drive to replace the dead 10gb hard drive that came with the computer when I bought it new. The installation was fairly easy. After the hard drive was installed and everything was put back together I turned on the computer and loaded the install disk into the cd tray. The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
Scott

Hey Scott,
The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
When you're in the installer go up to the top menu bar under utilities? or tools? and start up disk utilities. See if you see the hard drive there. If so it might not be formatted correctly so erase it and format it for your install (usually Mac OS Extended (Journaled). That should make it show up.
Richard

TS1424 Apple Mobile device does not show up after installing 10.0.7.21

Receive message "Apple Device not started". Apple Device does not show up in Adminstrative Tools, Services. Windows 7 64bit, IOS6.0.1.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Mobile Device Support won't install normally.
tt2

BSP does not show up after installation of service pack 9 on BW 7.0

Hi,
We are working on netweaver 2004s.
We have a very simple BSP page, which has been developed in BW box. Its just used to load flat files to the application server.
It was working well when we were at service pack 8. Recently we have installed service pack 9 and this BSP page either through portal or directly in web-browser does not show up at all i.e all we see is a blank page and the status bar of the browser keeps running forever.
Could you please advise what has gone wrong and is there a fix to this.
Note: other 2 BSP pages in the same BW system are working fine.
kind regards,
Waseem.

Hi Raja,
Thanks for your prompt reply.
I activated the BSP page and re-tested but it does not work.
When I activate in SE80, I get the message 'Active object generated'.
When I run it through portal or web-browser ... it does not show any message but the status bar of the browser keeps moving .... forever, indicating its doing something.
There are other 2 BSP pages which are working fine, but this BSP page ( which is the most important) is giving this porblem.
kind regards,
Waseem.

SXMB_MONI does not show payload after upgrade to SP15

Hi there,
We have installed SP15 in our system, everything seems to be working OK with exception of the SXMB_MONI which now does not show the Payload in the SOAP output/response.
Does anyone know if this is a know bug/functionality of SP15?
Thanks,
Roberto

The other OSS note:
SAP Note Number: 917885
XI: Attachments werden im Message-Monitoring nicht angezeigt
Version: 1, Note Language: EN, Released on: 01/27/2006
Symptom
An XML message contains attachments with mime types different from application/xml. When clicking on the attachments in Message-Monitoring for that message, the attachments cannot be displayed!
Error message is: "Format of the document cannot be displayed"
Other terms
SXI_MONITOR, SXMB_MONI, Runtime Workbench, XI, RWB, Message Display Tool, MDT
Reason and Prerequisites
Before displaying an attachment, Message Monitoring checks the mime type of the message with a list of supported types. Since there are several mime types for some applications, like powerpoint or excel, the check is not exhaustive.
Solution
The attached correction instruction adds additional mimetypes for powerpoint, excel, and word. The patch is included in SP17 for NW04 and SP7 for NW04s.
Actually both of these notes don't exactly indicate that the issue will be fixed in terms of the payload. We are going to apply it and see if it fixes the issue. I will update this forum when i try it out.
Regards,
Jay

Exporting RAW to JPG Does Not Show JPG After Export

When I export a RAW file that I want to be changed to JPG, the file does not show up in my Lightroom folder until I synchronize the folder that I exported to. What LR setting is needed so that the exported JPG file will show automatically?

In the Export Location area of the export dialog is a checkbox for Add to this Catalog if you have a newer version of LR.

Photoshop does not release memory after closing document.

When I close a large document Photoshop does not release the memory. If I open another document the program is slow and not resposive. If I close out of Photoshop and restart it then load the other document it is quick and responsive again.

A bit late to the party here but this issue is still live and I can't find anything else on the forum similar to it (apologies if there is).
Photoshop does not seem to re-use memory it just keep allocating new right up to the limit before the prog crashes (same applies to Fireworks) so any batch/script processing of more than a handful of files is impossible.
I am Photoshop via Creative Cloud (so I am always updated to your latest release), Windows 7 64k with 8Mb memory and am using Norton Intenet Security 20.3.1.22 which is updated daily.

Form does not show up after been put in portal page

I have created form application and tested it in 9iAS but when I put it in Portal page, It does not show up in the Portal page. The report that I created under the same Application does show up. However, it does not show the form. I have check the Access and everything looks right. (I even grant it to the public and still does not work).
Any help would be appreciated.

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by chetan.kashyap ([email protected]):
Johnny,
This looks strange. We haven't encountered such problem. Could you pls give us more details. Like:
Are you using "Inherit Privilege from Application" ?
Are you using Tab page/ Normal Page.
If tab pages, have you set tab level security?
Are you able to run that particular form from application? (Pls check it has a Valid production version).
Are both forms & reports in the same application?
Is this problem occuring for only a particular form or for all the forms?
If you could provide the STEPS that you did..
Thanx,
Chetan.<HR></BLOCKQUOTE>
Chetan and Johnny,
I have the same problem as Johnny. Chetan, in answer to your questions:
1. Yes, I am using "Inherit Privilege from Application"
2. I tried it both on a page and on a tab and checked security, following the directions in "Building Portals, Release 3.0.8" Using "Portal30" login, access "Manage" etc.
3. Yes, the form runs in Application, but not as a portlet on a portal page. We are using the standard demo configuration, Oracle 8i (enterprise ed.) and Oracle9i Application Server (minimal ed.).
4. Yes, valid production version.
5. I tried running reports and forms from same application and from different applications. Still does not show up on portal page.
6. It occurs for all forms.
7. Steps: As I indicated, I followed the directions closely in "Building Portals" which builds "Form based on table or view", "Publish to Portal" I even tried the database sequence (see page 4-27) and added that to the form configuration. I'm running it on NT 4.0 (service pack 5). The software was downloaded from the Oracle site.
null

Photoshop does not show Image after converting to sRGB

Similar Messages

Maybe you are looking for