Photoshop Element12

When i launch Photoshop Element12 and i click on Photo Editor it won:"t open .Ican open the Organiser and i click on on an a
image to open it won.t open

Hi Jeff,
Thanks for getting back to me.
When installing there a box on the screen that say that (installing shared technologies error), please restart.
I have restarted at this stage, and then you start the program it states that the trial have expired.
I.e.. I have only just trying to installing this program
I have tried to reinstall it, but the program uninstalls first, so it going through the same loop again.
I have looked at the troubleshoot installation on your site, but no answer to my problem,
I'm using windows xp with sp.3
I hope you can help me.
Yours W.morey
1
From: Jeff A Wright
  To: bill33mor
  Sent: Wednesday, November 20, 2013 8:44 PM
  Subject: installing photoshop element12 tryout
        Re: installing photoshop element12 tryout
        created by Jeff A Wright in Trial Download & Install - View the full discussion

Similar Messages

  • Installing photoshop element12 tryout

    Hi. When program finish installing it runs back and remove  the program, have done this twice now, with no luck.
    I'm using windows xp with sp3.
    Hope you can help, as i would very much like to try this program.
    Yours W.Morey

    Hi Jeff,
    Thanks for getting back to me.
    When installing there a box on the screen that say that (installing shared technologies error), please restart.
    I have restarted at this stage, and then you start the program it states that the trial have expired.
    I.e.. I have only just trying to installing this program
    I have tried to reinstall it, but the program uninstalls first, so it going through the same loop again.
    I have looked at the troubleshoot installation on your site, but no answer to my problem,
    I'm using windows xp with sp.3
    I hope you can help me.
    Yours W.morey
    1
    From: Jeff A Wright
      To: bill33mor
      Sent: Wednesday, November 20, 2013 8:44 PM
      Subject: installing photoshop element12 tryout
            Re: installing photoshop element12 tryout
            created by Jeff A Wright in Trial Download & Install - View the full discussion

  • Ho acquistato una versione photoshop element12 ma quando provo ad installarlo mi dice che il numero seriale non è corretto.

    buona sera
    avevo installato una versione di prova di photoshop element 12.
    ho acquistato la licenza per rendere mio a tutti gli effetti il programma. adobe mi manda un seriale che però non viene riconosciuto e non mi fa installare nulla.
    io devo usare photoshop per lavoro e dato che ho pagato la licenza cosa devo fare ancora?

    anche io ho lo stesso problema!!!

  • I had downloaded photoshop element12 and I don't know what I have to do after for installation

    I had downloaded photoshop element 12 and I don't know what I have to do after for installation.
    When I try, I have this message: Please install/uninstalled the product using set.up exe in the root folder...

    What does the file you downloaded look like - what is its name?  The instruction is telling you to look inside of it and run the setup.exe file.

  • Licence photoshop element12

    J'ai acheté regulierement un CD de ce logiciel avec un n° de licence.
    Aprés installation sur mon PC, on me demande d'activer la licence par une connection internet. J'utilise mon adresse mail, et l'id ADOBE, et même aprés enrgestrement sur le sire adobe de mon produit, je n'arrive toujours pas y accéder.
    Que faire ?
    Merci
    Bernard
    [email protected]

    contact adobe support, http://www.adobe.com/support/chat/ivrchat.html

  • Can I use adobe photoshop elements 12 and premiere elements 12 with a mac? and how?

    I have photoshop element12 &premiere elements 12 and want to put them on my mac. Mac has no where to put the discs. Can I use it and how? I need baby steps as I am not great with tech.

    Try to download the software from this link:
    <Download Photoshop Elements products | 13, 12, 11, 10>
    And from here for Premiere:
    <Download Premiere Elements products | 13, 12, 11, 10>
    Good luck.

  • Photoshop element12won"t switch to the editor worspace?

    photoshop element12 won"t switch to the editor workspace ?

    I think you need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
    1. Adobe Photoshop Elements
    2. Adobe ID, and signing-in
    3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
    It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
    Click here to get help now Contact Customer Care

  • Should I uninstall elements 12 before downloading photoshop CC?

    i am getting an error whilst downloading photoshop CC. Should I uninstall photoshop elements first?

    Hi Dm606,
    You don't need to uninstall Photoshop Element 6 before installing
    Photoshop Element12.
    However, it is totally your decission to uninstall PSE6 but it won't give you any
    problem if both version co-exist.
    Hope this helps.
    Please let me know if you have any other question.
    Regards,
    Sumit Singh

  • Element12

    I have yust downloaded Photoshop Elwment12 and when I open the Phoshop
    Element12 and click on thePhoto Editor of the workspace
    It won't open.   I can open the Organiser but when I want to send an imageto
    the Editor by clicking the Editor button on the bottom of
    The screen it wont open also

    Hi Jeff,
    Thanks for getting back to me.
    When installing there a box on the screen that say that (installing shared technologies error), please restart.
    I have restarted at this stage, and then you start the program it states that the trial have expired.
    I.e.. I have only just trying to installing this program
    I have tried to reinstall it, but the program uninstalls first, so it going through the same loop again.
    I have looked at the troubleshoot installation on your site, but no answer to my problem,
    I'm using windows xp with sp.3
    I hope you can help me.
    Yours W.morey
    1
    From: Jeff A Wright
      To: bill33mor
      Sent: Wednesday, November 20, 2013 8:44 PM
      Subject: installing photoshop element12 tryout
            Re: installing photoshop element12 tryout
            created by Jeff A Wright in Trial Download & Install - View the full discussion

  • I have purchased a new MacBook Pro. I purchased and download Elements 12 on my old one and want to download it to my new one. How?

    I need help transferring my Photoshop Element12 from my old MacBook Pro to a new 13 in Retina Display Macbook Pro. How can this be done? Both computers are using Yosemite 10.10.2.
    I'd appreciate any help.

    Go to this link, install and validate with your 24 digit serial number - click here for PSE downloads

  • I just purchased Elements 12. Should i uninstall Elements 6 before installing Elements 12?

    I just purchased Elements 12. Should i uninstall Elements 6 before installing Elements 12?

    Hi Dm606,
    You don't need to uninstall Photoshop Element 6 before installing
    Photoshop Element12.
    However, it is totally your decission to uninstall PSE6 but it won't give you any
    problem if both version co-exist.
    Hope this helps.
    Please let me know if you have any other question.
    Regards,
    Sumit Singh

  • スタートアップスクリーニングに移行しません.

    木下と申します。
    2014年2月にphotoshop element12を購入し、Windoes8にソフトをインストールして使用しています。
    昨日まで問題なくスタートアップスクリーニングに移行して、問題なく使用できていたのですが
    今日、いつも通り、写真の編集?をクリックしても体験版の期限が終了しましたと表示され
    スタートアップスクリーニングに移行しなくなりました。以前は、photoshop element7を
    使用していましたが、Windoes8では使用できないとのことでphotoshop element12を購入して
    使用しています。photoshop element7は使用期限が有りませんてしたが、photoshop element12
    では、使用期限があるのてすか? ないと思いますが、スタートアップスクリーニングに移行
    する方法を教えて下さい。
                                    以上

    kou-kazuさん。
    「このソフトウェアをライセンス認証する」のボタンがないんですね。
    シリアル番号についてはAdobeのマイアカウントに登録がありましたら確認が可能です。
    それ以外の場合は下記の方法をお試し下さい。
    サインインおよびライセンス認証における問題のトラブルシューティング(CC/CS6/CS5.5 | Photoshop Elements 12/Premiere Elements 12)
    ・「Hosts ファイルの確認」
     以下のリンクをクリックしてください。アドビのロゴが表示される場合、接続に問題はありません。
     URL : https://ims-na1.adobelogin.com/renga-idprovider/resources/img/logos.png
     併せて下記WEBページにアクセスしてください。
     CS6 で問題が発生している場合 : https://lm.licenses.adobe.com/gdf/status.jsp
     >「Alive」と表示されるかご確認ください。
    ・「証明書の確認」
    を行ってください。
    上記アクセスに問題ない場合は、【解決事例】Photoshop Elements 12 インストールしたがサインインできないを行います。
    改善しない場合は、http://download.adobe.com/pub/adobe/creativesuite/cc/win/ApplicationManager8.0_all.exe
    こちらよりAdobe Application Managerをダウンロードしてインストールした後にPhotoshop Elements12の起動をお試し下さい。
    尚も改善しないのであれば、http://helpx.adobe.com/jp/photoshop-elements/kb/cq12252231.html
    A、B、Cを行ってください。
    最終的には、手動でアンインストールする方法(Windows 版 Photoshop Elements 12)の操作になります。
    ライセンス認証のサーバーにアクセスするためにトラブルシュートをいくつもこなす必要があり、お時間もかかるのでオフライン認証のほうが早いです。

  • Error in starting Adobe Bridge in Photoshop CS2

    I've just installed Photoshop CS2, however upon opening Adobe Bridge this error message appears " The application has failed to start because libagluc28.dll was not found. Reinstalling to application may fix the problem"
    I have reinstalled and click repair but to no avail
    I followed Adobe Support Knowledgebase solution and run CMD and this appears:
    c:Documents and Settings/Jesus M Ferraris>
    then i entered the command
    cacls c:\windows\installer /T /E /C /G administrators:F
    but an error message appears - 'cacls' is not recognized as an internal or external command, operable program or bathc file
    I also entered the next command
    cacls "c:\documents and setting\all users" /Y /E /C /G administrators:F
    still the same error as above appears, Please help, have I miss something or was my procedure correct...
    P4, 512ram, WXP 80gHD

    Very useful.
    Good Luck.
    My
    Si
    tes

  • Error:  "Could not complete your request because of a program error" (photoshop CS2 9.0.2 on MAC OSX

    Today I started my program (photoshop CS2 9.0.2) and opened a JPG file. When I went to print the file the program crashed and closed. When I restarted the program and went to open the file I got this error message, "Could not complete your request because of a program error".
    I have tried several different file types/sizes and all result in the same error message since the program crashed. It will not open any file I try to open. As I indicated above I am using Photoshop CS2 9.0.2 it is on a MAC with OSX 10.4.11.
    I called Adobe and the Rep directed me to Tech Note 331307 and told me to Re-create the Photoshop preferences files. Which I did and restarted the program, but when I tried to open a file (any file) I still get the same error message so it doesn't appear to be the preferences.
    Does anyone have any info as to what the problem may be and how to correct it.
    Thanks

    Thanks for the response. OK... This is the first day I have been able to get back to the problem.
    My system I am running Photoshop on is a Power Mac G4, AGP Graphics ATY Rage 128Pro chip set 16MB VRAM LCD 1280x1024 32-bit color, 500MHz, 1.75GB of memory, 1 MB L2 Cache, 100 MHz Bus Speed. I had installed the latest security update and repaired the permissions the day the problem started.
    Now to day I started the system and went in and created a Guest Account. I logged into the guest account and started Photoshop. Low and behold it worked just fine. So I logged out of guest and logged into my main user account And started Photoshop. Wouldn't you know it.... It works just fine. I can open any file I want with now problems.
    I got to thinking after I had done all of this that I wished I had tried to open a file in Photoshop today prior to creating the guest account to see if it still had the problem in my main user account.
    I did not change anything else on the system and all seems to work fine now. So at his point I am really not sure what the problem was.
    Again thanks for taking the time to respond to this issue.

  • Adobe Stock Photos Stuck in Trash and Photoshop CS2 won't run!

    Okay, I apparently did something stupid. I'm not even sure how this happened, but I realized that Adobe Stock Photos folder was sitting on my desktop (I'm using OS X 10.5.6). I don't know when this happened and I didn't think I needed it so I dragged it to the trash. NOW I cannot run any of my Adobe software (includes Photoshop CS2, Illustrator CS2 and GoLive CS2).
    I can see the folder sitting in my trash, but it won't let me drag it back out. So, just as a test, I tried dragging out the one other file (.jpg) and I can't get that one either. I know this isn't a Mac forum, but I'm desparate and cannot find anything to help me.
    Probably I am going to have to reinstall everything and (of course) I can't find my CDs!!! Please don't get angry if I'm asking the wrong question. I've done an internet search and I cannot find any solutions.
    Thanks, Anne

    Adobe stock photos does not even exist anymore.
    Have you tried deleting your trash? I have no Adobe stock Photos on my computer and everything works. try restarting the computer.

Maybe you are looking for

  • How to use trigger file functionality in File Adapters - Match file names

    Hi, I am using trigger file functionality in File adapters to pick up data files as:- <property name="TriggerFilePhysicalDirectory" value="/pub/Dev/eastern/brs/"/> <property name="TriggerFile" value="*.trg"/> Here any file with .trg extension is take

  • VISACOM - Alloc Error using 488.2 USB-B Interface - too many open sessions

    I have been having the following issue in my VB .NET RF-ATE application.... It usually happens when my program enters a measurement loop (I.E. searching for P1dB). It begins to solve for P1dB and performs about 15 cycles (sets power level on SigGen a

  • OT: Any comment about mediatemple dot com

    I have some issues with my current web host provider for some time. They used to be really good, but as it seems losing its efficiency being reliable due to rapid growth and slow responses to fix systemwide from time to time. Such slow responses to f

  • Remove Digits from Layer Comp to Files Export

    Hello, Is there a quick way to remove the beginning of the string when running the Layer Comps to Files script? For example if the layer comp is named picture-of-tree, the exported files have _00001_picture-of-tree. I just need the resulting file nam

  • Quicktime Pro and .ts MPEG2 Files

    I posted a similar question in the AppleTV forum, but thought it may be better suited here. I have some HD .ts files that I'd like to convert for use with my AppleTV when it arrives. If I buy Quicktime Pro, would it be able to convert the file into a