Photoshop Elements 10 - Camera Raw für EOS 70D

Hallo, hat von Euch jemand eine Ahnung wie ich bei Photoshop Elements 10 Fotos im Raw-Format von einer Canon EOS 70D öffnen kann. Habe erst heute aktualisiert Camera raw,  aber ich kann die Fotos trotzdem nicht öffnen. Vielen Dank für Eure Hilfe - lbg Christine

Adobe updates Camera Raw to support new cameras only for the latest (at the time) version of Photoshop.
Here is a list of supported cameras vs. Camera Raw versions:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Here is a list of Camera Raw versions vs. Photoshop releases (which is, sadly, starting to fall out of date):
http://forums.adobe.com/thread/311515?tstart=0
Specifically, if Photoshop Elements 10 cannot update to Camera Raw 8.2 or newer, which I suspect it can't, then you will need to do one of two things:
1.  For the greatest integration and convenience, upgrade to the latest version of Photoshop Elements (currently 12).  Then you will be able to open your 70D files directly.
2.  Download and install the latest version of the free DNG Converter.  Then you will be able to convert your 70D .CR2 raw files to .DNG format, that Photoshop Elements 10 will be able to open.
-Noel

Similar Messages

  • Photoshop elements 11 camera raw update not compatible with my camera

    my PSE11 was working fine until i bought a new camera and tried to upload photos from my RAW files. It gave me this message
    "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
    Please visit the Camera Raw help documentation for additional information."
    so i tried to install the update.... installed it fine, kept getting the same message when i would try to open the photo. after researching online i found the suggestion of uninstalling and reinstalling photoshop elements. i did that once, tried the update again...same results. uninstalled again. tried the update again and still getting the same message. ive checked the adobe website and everywhere i look says the version of the camera raw DOES support my camera (nikon D7100). im at my wits end with this and dont know what else to do. please help!!!

    So what version of Camera Raw is installed?
    In PSE Editor, Help->About Plug-In->Camera Raw
    And what is your operating system?

  • Photoshop Elements 5,  camera raw documentation

    Hello,
    Is there a specific location to find documentation updates from one version of Camera Raw to another? I purchased a manual for PSE5 and the Camera Raw displays are for a version that is older then what I have(Camera Raw 3.7) installed. It is hard to follow with the fields not being the same. Also is there any big advantages to upgrade to a newer version of Camera Raw, say from 3.7 to 4.3.1?
    Thanks for any help
    Rob

    I have never used ACR with Photoshop Elements. I know that quite a few of the features are missing when compared with Photoshop. However, if you updated to ACR 4.3.1 I think you would have the clarity and vibrance controls that you don't have now. And there might be some other additions as well. I cannot tell you where to get more current documentation.

  • I don't see all option in Photoshop Elements and Camera Raw

    e.g. Auto-Align Layers in Image menu or Adjustment brush in Camera Raw. Please tell me what I need to do.

    That's because Elements is a reduced version of Photoshop.
    You have two questions:
    Auto align layers. My suggestion: google 'Photoshop Elements auto align layers' and you have a lot of answers and suggestions.
    The ACR module does not have all the features of the full version in Photoshop, but the important and meaningful ones are there. For the rest, you have to open your image in the editor where you have corresponding features. The editor has much more powerful tools than the adjustment brush for critical editing.

  • Photoshop elements 10 camera raw for nikon d7100

    I got a Nikon d7100 and PE will not read the raw (NEF) file.  I installed Camera Raw Converter v7.4 but it still won't read the files.  I have raw files from my D90 and they work fine.  I use Windows 7

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Mylenium

  • Photoshop elements 11 camera raw update

    Hello,
    I've seen that a new ACR 8.5 is now available for cs6 or cc with support for camera sony 77 mark2.
    Do you have an idea when will be a version for elements 11?

    PSE11 will not be updated and the 8.5 update for PSE12 is not yet available. You could download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in PSE11(keep your originals as backups and for use in the camera manufactures software)
    Windows download (.exe file) click here DNG Converter 8.5
    Mac download (.dmg file) click here DNG Converter 8.5
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Elements 12 (Camera RAW V8.0.0.137) öffnet die RAW-Dateien meiner EOS 70D nicht.

    Elements 12 (Camera RAW V8.0.0.137) öffnet die RAW-Dateien meiner EOS 70D nicht. Wann Update von Camera RAW  verfügbar? Gibt es eine andere Lösung?

    Hallo!
    Habe mir den DNG-Converter V8.3 von ADOBE runtergeladen und installiert (Installation musste ich merkwürdigerweise zwei mal starten. Fehlermeldung: "...ist keine 32bit-Anwednung" - Ich nutze noch WIN XP :-( ). Dann gleich 2-3 Bilder damit convertiert und dann mit (bereits offenem) ELEMTNS 12 mit Camera RAW versucht zu öffnen. Ergebnis: Fehlermeldung: "....diese Version wird von ELEMENTS 12 nicht unterstützt".  Nun habe ich Elements noch einmal zugemacht und wieder geöffnet und es nochmal versucht ... siehe da, der zweite Anlauf hat funktioniert. (Ausführliche Beschreibung damit anderen Usern das ggf. hilft.)
    VIELEN DANK für den Tipp!

  • How open raw from canon eos 70D in elements 11

    I cannot open raw from canon eos 70D in photoshop elements 11. Help me please.

    Your PSE is too old—the camera was released after a newer version of software was available and Adobe only adds new camera support to the newest version of software.
    Specifically, the 7D Mark II needs ACR 8.7 and PSE12 can only be updated to ACR 8.5.
    Your choices are to:
    Use the DNG Converter 8.7 or newer to create DNGs from the CR2s and those DNGs will open in the older version of ACR that comes with PSE12, OR
    Buy the newer version of Element 13 that can be updated to a new enough Adobe Camera Raw plugin.
    The DNG Converter is available from the Adobe Updates page:
    http://www.adobe.com/downloads/updates
    And the newer version of Elements is available from the Adobe Products page:
    http://www.adobe.com/products/catalog/software.html
    Another option would be to use Lightroom 5.7 or newer and use Edit in Photoshop Elements from LR once most of your raw adjustments are done, for any final touches in Elements. 
    For any of these choices you’d want to download the latest updates and run the software in trial mode to make sure your computer is compatible before paying anything.
    BTW, I have the 7D Mark II and like it very much, having upgraded from an older Digital Rebel, but I’m not that thrilled with the in-camera JPG processing so always use Adobe products for raw development.

  • How to use the update mechanism in Photoshop CS10 for Camera Raw?

    Good Evenning!
    I would like to open .NEF files with Adobe Photoshop CS10 (RAW for Nikon D5200) but my version of Camera Raw is too old.
    I need at least the 7.3 version.
    When I try to download it, I have this message: Please use the update mechanism in Photoshop CS10 for Camera Raw. But how?? When I go to "Help" tab, to "Updates", it says that no update available.
    Can please someone help me?
    Thanks a lot!!
    Kinds Regards
    Vanessa

    Which version of photoshop or photoshop elements are you using?
    Which operating system?
    There is no such version as cs10.
    Do you mean photoshop shop elements 10?
    If you go to Help>About Photoshop Elements (windows) or Photoshop Elements Editor>About Photoshop Elements (mac), that should tell you which version you have.

  • I can not update Elements 11 camera raw  8, , I said that already updated

    I see that Photoshop is updated camera raw (to 8), but  is camera raw 7.4 elements 11. I bought a new camera and I do not recognize the raw, however comes in the list of camera raw 8. Do I have a problem in my program to update?

    Try a manual update to ACR 8.1 like this:
    Download the Plug-in zip file from here:
    http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/8.1.79/setup.zip
    When you have it explore it and go here:
    ...setup.zip\payloads\AdobeCameraRaw7.0All-290513174249\Assets1_1.zip
    Then extract the 1003 file, rename it and put it where the other .8bi file is, which you renamed to *.old. (C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\Elements 11\File Formats)
    This should also work with version 8.2, which is here:
    http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/8.2.67/setup.zip
    Juergen
    PS: Link to Version 8.1 does not seem to work anymore.  Use 8.2 instead.

  • Elements 12 Camera Raw

    Can Elements 12 Camera Raw be updated from ver 8.0 to ver 8.2? From what I can find out the CR2 files from my Canon 70D require ver 8.2. I am unable to open them in Elements 12 even though the CR2 files from my older Canon T3i open with no problem.

    The list of cameras and ACR versions is here:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Help / Updates from PSE’s Editor should update to ACR 8.3.  If it says things are up-to-date, then reboot and try it, again, and if it still says that, then you might try re-installing PSE12.  That worked for someone else within the last couple days.
    Otherwise, someone else tried the direct-download link for ACR 8.3 CC on Adobe’s blog and it worked to update their PSE11 so I expect it’d work for PSE12:
    http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected

  • Camera raw file from EOS 650D

    I can not view my Camera raw file from EOS 650D on my laptop - which uses photoshop CS5 (as part of my creative suite)
    I have now purchsed a new mac laptop and photoshop CS6 (part of the creative suite collection) and still can not view my camera raw files. Any help would be much apricated as i have not been able to view my file for 2 weeks now.
    Thank you so much,
    syc

    That camera model was supported for the first time by ACR 7.1 which only works with Photoshop 13.0.1 ("CS6").
    When you first instal CS6, it installs ACR 7.0.  You must now update the Adobe Camera Raw plug-in to 7.2, wich is the current version.
    Just go to Photoshop > Help > Updates and apply all available updates.  That will take you to Photoshop 13.0.1 and ACR 7.2. 

  • Adobe Bridge CC crashes when opening file with Photoshop CC or Camera RAW!

    Adobe Bridge CC crashes when opening file with Photoshop CC or Camera RAW!
    - Tried to Reset the preference with CTRL + Click.
    - It's just new clean install didn't do anything with it yet.
    - Windows 8.
    Any help?

    Just that one project, or any project?  Can you create new projects?

  • I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed

    I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed them in the past.  How can I get it to display these photos in Bridge and open them in RAW?

    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
    Benjamin

  • I have a Canon 5D Mk lll/Photoshop & Bridge CS6/Camera Raw 7.1 and I still can't open the CR2 files

    I have a Canon 5D Mk lll/Photoshop & Bridge CS6/Camera Raw 7.1 and I still can't open the CR2 files on my Canon.
    Any insight/wisdom would be much appreciated. Thanks

    When you try to open in PS what happens?
    In Bridge do you see icons or thumbnails?
    Will it open in ACR in Bridge?

Maybe you are looking for