Photoshop Elements 10 does not recognize my printers after upgrading,  I need it to recognize all my

I have been a long time user of Elements.  I recently upgraded to 10 and it no longer recognizes my printers.  It says that I need to install printers.  When I look in Windows my printers are still installed and work with other programs.  The forum wants my to set a photo printer as a default, but i use a laser printer as a default for word processing.  This seems to be a serious problem for more than just me.

You're not talking to Adobe here. The responders are users, like you, trying to help. Did you rename one of the HP printers, as suggested?
Also, have a look at this thread:
http://forums.adobe.com/thread/947843?tstart=0

Similar Messages

  • Photoshop CS6 does not detect display adapter after upgrading to Windows 8

    Hi, I just upgraded my 3 year old Dell XPS 16 which came with a AMD (ATI) Radeon HD 5730 (1GB) graphics card to Windows 8 (along with a new SSD hard drive), and reinstalled CS6, and now I get messages that the program is no longer detecting my dedicated graphics card. I updated the drivers from both Dell and AMD, and I get the same result.The Graphics Processor Seting box is greyed out in Preferences, and it says it detected an error in my display driver. Everything was fine with the same graphics card under Windows 7.
    I suspect that when Windows 8 was installed it installed a generic AMD driver, and even though I have updated it from Dell and AMD several times, something is not quite right because I can't find the AMD Catalyst Control Center. So it might be a WIndows 8 & AMD issue, but I don't really know for sure.
    If anyone has any ideas how to get the graphics driver working properly for CS6 I'd be very happy.
    Thanks

    Thanks everyone for all the helpful advice.
    I finally gave up and called Dell (thank god for my 3 year XPS warranty). Screen shared with a techncian who was surprisingly knowledgeable, and even though he tried updating different versions of the driver for about an hour, he finally suceeded when he went through this link on the AMD site, using the driver verification tool:
    http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx#1
    Then he downloaded the file:
    13-1_mobility_vista_win7_win8_64_dd_ccc_whql
    He was finally able to load up Catalyst Control Center and the proper AMD driver. CS6 now sees the graphics adapter.
    Hopefully this thread helps some other poor W8 upgrader like me.

  • Adoble photoshop elements does not recognize printer although other software programs do print...

    Adobe Photoshop Elements does not recognize printer..error message says you must install printer.  Other software does print documents.

      Try opening an image in full edit, then press crtl+p
    Wait for the print dialog to open and try to select your printer by clicking the dropdown menu.
     

  • My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it via internet the first time december 2013?)

    My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it from Adobe via internet the first time december 2013?)

    Did you download the Basic/Free version?
    I also thought the Trial period was as long as you needed!?
    What is your Warranty and Return Policy?
    You get to use VueScan for as long as you want before you buy it, so we recommend you test it before you buy it to make sure it meets your needs.
    All sales are final and there are no refunds.
    Isn't this a bit harsh? Naah I actually prefer to solve problems, and if I offer refunds, people give up too easily. If I can't solve your problem after you send a few Problem Reports (see above), I'm happy to give a refund.
    http://www.hamrick.com/sup.html#q

  • Photoshop elements does not open, says "gathering user info...."

    photoshop elements does not open, says "gathering user info...."

    Hi,
    Please try couple of probable solutions as mentioned below:
    Solution 1:
    1. Close Elements.
    2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
    3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
    Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
    Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
    Solution 4:
    On the drive on which you have installed PSE,on my machine it is on C:
    Go  to C:\Program Files\Adobe\Photoshop Elements  9\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain  plug-in. Remove that plug-in from that location and copy it somewhere  else.
    Now launch PSE and check if it works.
    Solution 5: Try with admin account or right click and select run as admin. or try directly from .exe
    For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743
    Thanks,
    Garry

  • Photo library does not sync in iOS4 after upgrade in 3GS

    Hi all,
    Photo library does not sync in iOS4 after upgrade in 3GS.
    Anyone having such problems?

    Just did. Uncheck sync photo check box and sync. Then check sync photo check box and sync. Solved.

  • "Edit in Photoshop Elements" does not appear as option in Lightroom 4.3

    After viewing this artical:
    http://helpx.adobe.com/x-productkb/multi/edit-photoshop-command-missing-photoshop.html  and completing all options related to the Mac, the "Edit in Photoshop..." still does not appear as a clckable option in my Lightroom 4.3 program which has all the current updates.  Also, my Photoshop Elements 11 program also has all the current updates.
    Please note that in the interest of time, that all of the "solutions" were attempted in the above mentioned link
    Also, was on hold with Adobe Lightroom help phone support for over 1.5 hours without any agent answeing the phone.  Also Adobe automatied phone support states that Photoshop Elements is not supported free of charge and it is fee based.  How is a consumer suppose to have a problem corrected in Lightroom that stems from Elements when it is suppose to intergrate that way between the two programs but any help to try to correct the way it is suppose to work will cost you an addition fee in phone support for Elements?
    And help on fixing this issue will be apprecitated.
    Lightroom v 4.3 / Camera RAW v 7.3
    Elements v 11.0 / Camera RAW v 7.3.0.71

    Did this with Adobe support in LIVE CHAT, what a waist of time.  Although this will correct the issue, it is like a work around and not solving why EDIT IN PHOTOSHOP... is not a clickable option (greyed out) in LR.
    After the configure as suggested above, does this preclude and editing in Lighroom?
    What I want to do is:
    Edit the photo in LR except for:
    the useage the great Spot Healing Brush Tool that PSE offers, edit that part of it in PSE then SAVE the results back to LR.  Any problems or suggestions for this?
    Thanks so much

  • PhotoShop Elements does not launch

    I purchased PhotoShop Elements; did not download the trail version.  It worked nice; I liked it.  I then had to do a system restore unrelated to Photoshop.  Afterwards, I re-installed PhotoShop.  When I launch PhotoShop I have the option to select the Organizer or Photo Editor.  I can't launch either; a message appears that says my trial has expired.  I have spent 3 hours with Adobe tech support and they could not get it to work.  I was told if I still had the issue, call tech support again...this isn't exactly tech support.  They also told me that re-installing this software will cause it to NOT launch.  Has anyone else experienced this?  Maybe someone out there has and found a solution that will work for me.  Thanks!

    Good day!
    Please check out
    http://forums.adobe.com/community/photoshop_elements
    Regards,
    Pfaffenbichler

  • After Successfull Installation of Photoshop Element 3.0 On Mac OS 10.6.8, Photoshop Elements does not start saying that personalization information is invalid or missing

    I have installed Photoshop Elements 3.0 from original disk on my MacBook Pro with Mac OS 10.6.8. The installation was successful. However, when I try to run Photoshop Elements, it does not start, with the message "Could not complete your request because of missing or invalid personalization information". I uninstalled Adobe Elements and deleted all Adobe files from both the System Library Preferences and from the User Library Preference. Then tried the installation again. The installation was successful, but the application fails to start with the same missing/invalid-personalization-information message.
    Please advise

    I am sorry Invalid Personalization but Photoshop Elements 3.0 requires a PowerPC processor or Rosetta installed in order to function.  You can find the system requirements at System requirements | Adobe Photoshop Elements.
    You may want to try following the steps listed at Mac OS X 10.6: If you need to install Rosetta to attempt to install Rosetta.  That may still not resolve your licensing issue however as the application was also designed for Mac OS 10.2.8 and 10.3.

  • Photoshop Elements does not start

    Hello,
    I bought and installed Photoshop Elements a view month ago and it worked fine. Yesterday I wanted to edit a photo, but it was not possible to do any changes to the photo, because the program crashed every time I tried. So I reinstalled the program and now it doesn't even start anymore. If I start it over the select screen (Organizer/Editor) it says "Photoshop Elements funtkioniert nicht mehr, es wird nach einer Lösung gesucht" and if I start the editor directly I get an error message: PhotoshopElementsEditor.exe - Einsprungpunkt nicht gefunden. Der Prozedureinsprungpunkt "__crtCreateSymbolicLinkW" wurde in der DLL "MSVCR110.dll" nicht gefunden. Does anyone have a solution to this problem?

    After a view days of searching a found a solution: I installed the MS Visual C++ Reditributable für Visual Studio 2012 Update 4 (both 32 bit and 64 bit) and now Photoshop Elements runs without any problems.

  • Photoshop Elements does not start under Windows Vista

    The Twain-Module of my Canon CanoScan FS4000US Filmscanner works only under Windows Vista (no newer OS!). Fortunately I own an older Notebook with Vista as OS, so I have PSE Version 5.0.2 installed and use it to import my old color negatives via the twain module. Fine! It even works with 42 bit. But suddenly, PSE refuses to start and freezes at the window loading the libraries. At this stage it can only be stopped with the help of the task manager. A little search in the internet informs me that I am not the only user with that specific problem. Any help from Adobe?

    After a view days of searching a found a solution: I installed the MS Visual C++ Reditributable für Visual Studio 2012 Update 4 (both 32 bit and 64 bit) and now Photoshop Elements runs without any problems.

  • Photoshop Elements does not start for the second time

    Hello,
    our customer has problem with PS Elements 12. He can start it for the first time and everything works fine. But when he closes the program and tries to start it again, it will not start. It doesnt even say anything. No error mesages or anything. He tried to instal a trial version of PS E 13 and it does the same thing.
    He's running Win 7 SP1 64 bit
    Any sugestions? Thank you.

    Hi,
    It has been known that the Welcome screen sometimes fails to close properly and prevents a second load.
    Most people have overcome the problem by creating a shortcut direct to the two main applications.
    Organizer: "C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
    Editor: "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
    Brian

  • "Open with Photoshop Elements" does not work

    My picture does not open in Photoshop Elemtens when I use "open with" for a JPEG. The programm starts but no picture opens. What can I do?

    Any JPEG?
    How about other file types?
    See here:
    Files won't open in Photoshop Elements 11
    Re: jpeg files won't open in elements 10

  • Adobe Photoshop Elements does not respond when quicktime is installed

    I currently have a Windows Vista PC with Photoshop Elements 5.0. Photoshop seems to work fine, however when Quicktime is installed, Photoshop stops working (sometimes immediately and sometimes within a few days). When Quicktime is installed, Photoshop will start, but freezes and never loads pictures. I read a post at another website with the same problem suggesting that I could unistall Quicktime and then reinstall. I tried uninstalling and Photoshop started working immediately. However, when I reinstalled Quicktime the same thing happened. I've tried this numerous times, both by installing Quicktime separately and as a package with iTunes. I would be fine w/o quicktime on my computer, however it seems that I need it in order to use iTunes. Any advice on what to do? Thanks.

    FYI, I'm using a Mac with the latest OS, whatever that's called.

  • Oepe claims domain version does not match running server after upgrade

    Hi,
    we've just upgraded our server and development environment:
    OEPE: from 11.1.1.6.1 to 11.1.1.7.2 useing the eclipse update functions (help-> check for updates)
    Weblogic 10.3.3.0 to 10.3.5.0 using wls1035_upgrade_generic.jar from oracle support.
    The servers seem to run fine and so does eclipse.
    I can add the local (upgraded) weblogic devel server to the eclipse server list and deploy jee files. However, the remote server were not validated after the upgrade:
    "Oracle Weblogic Server 11gR1 Patchset 4 at [remote host] [Stopped, The domain version does not match the running server.]
    Removing and adding the servers again got the same result. The servers are running in development mode and are running. Where is eclipse checking / comparing the versions ?
    thanks,
    Michael

    Hi,
    thanks for the replies.
    checked the config.xml:
    there are two elements domain-version and configuration-version set both of these to 10.3.5.0
    I also created a new domain. The config wizard script only gave me the option to create a domain based on 10.3.4.0 but when i went through with the setup the 10.3.5.0 and i could add the server to eclipse.
    I cannot add the original domain though i'm now getting the error "The domain path does not match the running server." And i can't say whether this is because i added the new domain or modified the config.xml.
    thanks,
    michael

Maybe you are looking for

  • DECODE does not work with alphabetic data in ODER BY clause

    The following ORDER BY clause works when no parameters are involved. The data in the columns is alphanumeric. The first column is NUMBER in the Oracle database. The second is VARCHAR2. The last two are CHAR. It works fine with alphabetic and alphanum

  • How to Install a Plugin ?

    I have downloaded FlashAlbumExporter - what do i do now ? it isn't executable so what do i do ? I tried putting it in the Plugins dir for aperture but find there isn't one and when I tried creating a dir it told me i don't have enough privileges to d

  • Configuring an NFS Share for CDM (SGD 4.6 on Linux)

    hello all, i'm not able to access local drive from apps because i don't create /smb on the server, as specified in the doc 821-1926.pdf. My question is: - is it mandatory to have a nfs share on the SGD server? Users just need to load local files into

  • Discoverer vs. BO vs. Cognos

    Is there any comparison between Oracle BI tools (10g) and Cognos, BO BI tools? Please mail me [email protected]

  • Apps aren't bought?

    My siblings use the same itunes account as I do, and they bought an app.  now, however, when I go to the app store to get the same app, it says it hasn't been bought and I have to re-buy it. what should I do to make sure I won't have to pay money?