Photoshop Elements 10 does not see newly added memory

Hi,
I have been using PSE 10 on my MacBook Pro with 4 GB memory (RAM). Today I upgraded to 16 GB but PSE still displays available memory as 3072 MB.
What can I do to make it use the extra memory? Thanks for reading this.

Yes, I am seeing a problem. When merging multiple frames into a Pano, PSE tries to extrapolate the image vertically to fill the edges. That does not work at all with 4 GB.
Besides, more the merrier. With more memory, I expect the response to be snappier even for normal edits.
I understand that Adobe may want to push me over the edge towards the CS6 if the above really matter to me. It's like driving an economy car versus a luxury car. I only wish the price difference wouldn't have been so huge.

Similar Messages

  • My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it via internet the first time december 2013?)

    My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it from Adobe via internet the first time december 2013?)

    Did you download the Basic/Free version?
    I also thought the Trial period was as long as you needed!?
    What is your Warranty and Return Policy?
    You get to use VueScan for as long as you want before you buy it, so we recommend you test it before you buy it to make sure it meets your needs.
    All sales are final and there are no refunds.
    Isn't this a bit harsh? Naah I actually prefer to solve problems, and if I offer refunds, people give up too easily. If I can't solve your problem after you send a few Problem Reports (see above), I'm happy to give a refund.
    http://www.hamrick.com/sup.html#q

  • Photoshop elements does not open, says "gathering user info...."

    photoshop elements does not open, says "gathering user info...."

    Hi,
    Please try couple of probable solutions as mentioned below:
    Solution 1:
    1. Close Elements.
    2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
    3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
    Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
    Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
    Solution 4:
    On the drive on which you have installed PSE,on my machine it is on C:
    Go  to C:\Program Files\Adobe\Photoshop Elements  9\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain  plug-in. Remove that plug-in from that location and copy it somewhere  else.
    Now launch PSE and check if it works.
    Solution 5: Try with admin account or right click and select run as admin. or try directly from .exe
    For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743
    Thanks,
    Garry

  • LOV does not show newly added data in the same session

    Hi guys,
    I work with JDeveloper 11g Release 2. We use Oracle ADF to develop our web app.
    In a page we have a LOV (say the page name is "a"). The related data for that LOV is inserted to the db in another page ( say the page name is "b").
    When new data is added in the page "b" and goes directly to the page "a" the LOV does not show newly added data. But if the user log out and log in again
    LOV shows newly added data correctly.
    Is there a way to show the newly added data in the same session without logging out? Please help.
    Regards !
    Sameera.

    Add the following method in your ViewRowImpl base class:
    public void refreshLOVAccessorQueries() {
        List lovs = getViewDef().getListBindingDefs();
         if (lovs != null) {
             for (Object obj : lovs) {
                getListBindingRSI((ListBindingDef)obj).getRowSet().executeQuery();
                 ListBindingDef lbd = (ListBindingDef)obj;
    Export that method to the Row Client interface, add him to the pageDef, and invoke in the executables section of the pageDef:
        <executables>
    <invokeAction Binds="refreshLOVAccessorQueries" id="callRefreshLOVs"
    RefreshCondition="#{!requestContext.postback and empty bindings.exceptionList}"/>
       </executables>

  • Adoble photoshop elements does not recognize printer although other software programs do print...

    Adobe Photoshop Elements does not recognize printer..error message says you must install printer.  Other software does print documents.

      Try opening an image in full edit, then press crtl+p
    Wait for the print dialog to open and try to select your printer by clicking the dropdown menu.
     

  • Elements does not see some files

    I have folders in which Elements shows fewer files than Windows Explorer, and I can open the files with Explorer that don't show up in Elements, and Elements does not see them when I try to reconnect or find them.  Why does Elements not see some files, even when you try reconnecting?

    I think I may have moved these files with Elements into a different folder, and then copied them back into the original folder with Explorer, so there are now two copies of the same files with the same names in different folders,
    In this situation, PSE is most likely saying (in its very unhelpful way) that the file you're trying to import is a duplicate of one that already exists in the catalog.   PSE considers a file to be a duplicate if it has the same name, size, and last-modified date/time.  
    If you want a duplicate of a photo in the catalog, select one or more thumbnails and do File > Duplicate.
    What's the reason for wanting the duplicate photos in the catalog? There may be other ways of accomplishing your goal without making duplicates. 

  • BPM Process does not show newly added task

    I added a new task to my current BPM Process which has several tasks already built into it and they work when deployed. When I execute the workflow and get to that step, I get the following message: Details not available for this task. I am using jDeveloper 11.1.1.5. I created my page with ADF. I can see the pages for all the rest of the tasks in my process but not this newly added step. I have checked the source for this task against other tasks in the process and it looks the same. Does anyone have an idea what I might need to change or add in order to make this work?
    Edited by: user10279592 on Jan 13, 2012 7:20 AM

    If you're getting the Server 500 error and it is not an initiator task, what are you seeing at the bottom of your log file?
    If you're getting the Server 500 error and it's an initiator task, then there is a trick to figuring out the real problem (close the dialog -> refresh the worklist -> select the work item at the bottom of the list). The initiator activity makes it necessary to do this additional step to see what the issue is.
    Hope this helps,
    Dan

  • "Edit in Photoshop Elements" does not appear as option in Lightroom 4.3

    After viewing this artical:
    http://helpx.adobe.com/x-productkb/multi/edit-photoshop-command-missing-photoshop.html  and completing all options related to the Mac, the "Edit in Photoshop..." still does not appear as a clckable option in my Lightroom 4.3 program which has all the current updates.  Also, my Photoshop Elements 11 program also has all the current updates.
    Please note that in the interest of time, that all of the "solutions" were attempted in the above mentioned link
    Also, was on hold with Adobe Lightroom help phone support for over 1.5 hours without any agent answeing the phone.  Also Adobe automatied phone support states that Photoshop Elements is not supported free of charge and it is fee based.  How is a consumer suppose to have a problem corrected in Lightroom that stems from Elements when it is suppose to intergrate that way between the two programs but any help to try to correct the way it is suppose to work will cost you an addition fee in phone support for Elements?
    And help on fixing this issue will be apprecitated.
    Lightroom v 4.3 / Camera RAW v 7.3
    Elements v 11.0 / Camera RAW v 7.3.0.71

    Did this with Adobe support in LIVE CHAT, what a waist of time.  Although this will correct the issue, it is like a work around and not solving why EDIT IN PHOTOSHOP... is not a clickable option (greyed out) in LR.
    After the configure as suggested above, does this preclude and editing in Lighroom?
    What I want to do is:
    Edit the photo in LR except for:
    the useage the great Spot Healing Brush Tool that PSE offers, edit that part of it in PSE then SAVE the results back to LR.  Any problems or suggestions for this?
    Thanks so much

  • PhotoShop Elements does not launch

    I purchased PhotoShop Elements; did not download the trail version.  It worked nice; I liked it.  I then had to do a system restore unrelated to Photoshop.  Afterwards, I re-installed PhotoShop.  When I launch PhotoShop I have the option to select the Organizer or Photo Editor.  I can't launch either; a message appears that says my trial has expired.  I have spent 3 hours with Adobe tech support and they could not get it to work.  I was told if I still had the issue, call tech support again...this isn't exactly tech support.  They also told me that re-installing this software will cause it to NOT launch.  Has anyone else experienced this?  Maybe someone out there has and found a solution that will work for me.  Thanks!

    Good day!
    Please check out
    http://forums.adobe.com/community/photoshop_elements
    Regards,
    Pfaffenbichler

  • "Open with Photoshop Elements" does not work

    My picture does not open in Photoshop Elemtens when I use "open with" for a JPEG. The programm starts but no picture opens. What can I do?

    Any JPEG?
    How about other file types?
    See here:
    Files won't open in Photoshop Elements 11
    Re: jpeg files won't open in elements 10

  • After Successfull Installation of Photoshop Element 3.0 On Mac OS 10.6.8, Photoshop Elements does not start saying that personalization information is invalid or missing

    I have installed Photoshop Elements 3.0 from original disk on my MacBook Pro with Mac OS 10.6.8. The installation was successful. However, when I try to run Photoshop Elements, it does not start, with the message "Could not complete your request because of missing or invalid personalization information". I uninstalled Adobe Elements and deleted all Adobe files from both the System Library Preferences and from the User Library Preference. Then tried the installation again. The installation was successful, but the application fails to start with the same missing/invalid-personalization-information message.
    Please advise

    I am sorry Invalid Personalization but Photoshop Elements 3.0 requires a PowerPC processor or Rosetta installed in order to function.  You can find the system requirements at System requirements | Adobe Photoshop Elements.
    You may want to try following the steps listed at Mac OS X 10.6: If you need to install Rosetta to attempt to install Rosetta.  That may still not resolve your licensing issue however as the application was also designed for Mac OS 10.2.8 and 10.3.

  • Photoshop Elements does not start for the second time

    Hello,
    our customer has problem with PS Elements 12. He can start it for the first time and everything works fine. But when he closes the program and tries to start it again, it will not start. It doesnt even say anything. No error mesages or anything. He tried to instal a trial version of PS E 13 and it does the same thing.
    He's running Win 7 SP1 64 bit
    Any sugestions? Thank you.

    Hi,
    It has been known that the Welcome screen sometimes fails to close properly and prevents a second load.
    Most people have overcome the problem by creating a shortcut direct to the two main applications.
    Organizer: "C:\Program Files (x86)\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe"
    Editor: "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
    Brian

  • Photoshop Elements does not start

    Hello,
    I bought and installed Photoshop Elements a view month ago and it worked fine. Yesterday I wanted to edit a photo, but it was not possible to do any changes to the photo, because the program crashed every time I tried. So I reinstalled the program and now it doesn't even start anymore. If I start it over the select screen (Organizer/Editor) it says "Photoshop Elements funtkioniert nicht mehr, es wird nach einer Lösung gesucht" and if I start the editor directly I get an error message: PhotoshopElementsEditor.exe - Einsprungpunkt nicht gefunden. Der Prozedureinsprungpunkt "__crtCreateSymbolicLinkW" wurde in der DLL "MSVCR110.dll" nicht gefunden. Does anyone have a solution to this problem?

    After a view days of searching a found a solution: I installed the MS Visual C++ Reditributable für Visual Studio 2012 Update 4 (both 32 bit and 64 bit) and now Photoshop Elements runs without any problems.

  • Web Analysis data layout does not reflect newly added attribute dimension

    Hi,
    We newly added one new attribute dimension. If any new report creation in Web Analysis reflect that dimension. However, the reports which are old(created before the addition of new dimension), does not show the newly added dimension.
    Please advice.
    Thanks,
    Meenakshi

    Thanks for this.
    I have tried assigning the new DB connection. However, still it did not work. Does the data layout displays dimensions according to reports. I mean, can we restrict the visibility of dimension at report level? Please advice.
    Thanks,
    Meenakshi

  • Printservicelookup does not list newly added printer in OAS R2.

    Hi,
    We are using OAS R2 Server and JDK 1.5. In our application we have a scenario where we will display the list of printers configured to the Server. The below is the code we are using to get the list of printers configured in the server.
    Code:
    AttributeSet aset = new HashAttributeSet();
    PrintService[] services = PrintServiceLookup.lookupPrintServices(null,aset);
    The above code works fine to display the existing printers configured in the server. But when ever we add a new printer to the server, it is not listed. We have even restarted the server and the machine after adding the printer,Still it does not display the newly added printer. Any help would be greatly appreciated?
    P.S: The same code works fine in OAS R3 server, after restarting the server it displays the newly added printer.
    Regards,
    Karthik

    I have the same problem. Have you found any solution to this issue?

Maybe you are looking for