Photoshop Elements 10 not open new raw files

Canon 70D camera software open images ok, byt Photoshop Elements not. Windows 8.
Adobe DNG Converter 8.2 not work!!!!
Are mast BY new adobe Elements 12???

Hi,
As you have found out PSE 10 will not access EOS 70D Raw images directly but the DNG converter should work.
The DNG converter works on folders
You need to first copy the RAW files from your card/camera into a folder on your PC.
I suggest that you then create another folder to take the converted files
Then load the DNG Converter and give it the input and output folders and hit the convert button
The DNG files created should then be able to be processed by PSE 10
If you are failing, can you give more details like where and how it fails.
If you decide to upgrade to PSE 12, you must do an update after you have finished the install so that it will read the 70D raw files.
Brian

Similar Messages

Photoshop CS4 will not open newer RAW format

I have CS4 with latest updates, Camera Raw 5.7 and my CR2 images will not open. I have a Canon EOS Rebel T3i.
I have searched for over 2 hours looking for a solution and according to what I have read I should have what I need to open these files.
When I go into Adobe Exchange to find a possible program, it takes me to a page that wants me to download the Adobe Exchange Panel. However
this is only available to CC or CS6, neither of them I have. I can't get past this page. So I guess Exchange no long exists for those of us with older programs.
I really hardly ever use this program, but since I need it to open my RAW photos.
I can't afford to upgrade this program at this time and I find it odd they cut off the Exchange area for everything else.
If someone could help me figure out how to get my photos to open in this program without having to buy yet another program that would be wonderful.
I do not use this enough to justify the cost of the upgrade. What is missing that I need? The compaitable chart says I have the correct version for my camera. I am at a loss.
I am sure somewhere someone has asked this before, but for the life of me I can't find one that is based on my criteria, that will help me with my problem.
Thank you for any assistance you can offer.
My System specs:
Intel Core2 Quad Q9400 2.66GHZ
4GB Memory
GeForce GTX 460 Video 1GB Dedicaed Memory
64Bit Windows 7

The Canon T3i was first supported in Adobe Camera Raw (ACR) 6.4
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
ACR 6.4 is only compatible with CS5 and later. It is not compatible with CS4 so CS4 cannot open Raw T3i files..
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
To open Raw files in Photoshop, your options are to update to CS6 or the Cloud.
The other option is to use the free Adobe DNG Converter to convert all Raw files from the T3i to DNGs. That adds an extra step to your workflow every time you shoot photos. Then open and edit the DNGs in CS4.
http://www.adobe.com/products/photoshop/extend.displayTab2.html
http://www.youtube.com/watch?v=0bqGovpuihw
If you hardly touch Photoshop, another option may be to buy Photoshop Elements 12. Then you can open and edit Raw files from the T3i but you'll have the more limited Elements toolset. You could then export to TIFF and open the TIFFs in CS4 if necessary.

Photoshop 5.5 Not Opening Newer .pdf files?

I am a volunter on our neighborhood's Board Association and I am in charge of putting together our quarterly newsletter. I have used photoshop 5.5 in the past to open .pdf files sent to me to save them to a .jpeg for insertion into the newsletter that is created in Pagemaker 6.5. (I know, I know, pretty atiquated, but it works!) However, I have received two more .pdf files that, for all I can figure out, were created with the newer Acrobat 9.3, and my Photoshop 5.5 will not open them. It gives me a "Generic PDF Parser Error: There was an error processing the document. The file may be damaged or corrupted." Is this indeed true of the .pdf files and the Acrobat 9.3 connection, and if so, what can I do besides the obvious -- upgrading?!

Hi,
This is the Photoshop.com forum, which is the online forum for the Photoshop.com web site.
You'll get the best response if you post over in the Photoshop forum: http://forums.adobe.com/community/photoshop
Thanks,
Shikha

Why can't I, or how can I, update Photoshop Elements 11 to open D7100 RAW files?

I purchased Elements 11 via the App Store, and cannot find a way to update the software so that the newest version of ACR (7.4) will work with it.
Some places seem to say that if I puchased through the App Store then I can only update the programme when Apple releases an official update! Is this seriously the case, so although Adobe have released a new version of ACR to allow users who purchased elsewhere to update the software, App Store users cannot?!
If this, ludicrously, is the case is there any information on when this update will occur? The D7100 has been out for over two months now.
I contacted Adobe and they said I have to speak to Apple as I purchased through them, and that they cannot help. However, the only support button I can find relating to Elements 11 on the App Store directs me to the Adobe pages! Rather frustrating.
Is there any other way that I can contact someone at Apple for some support on this?
(The D5100 I used to have worked fine, so it is definitely the case that it is the newer files compatibility that is causing the issue)
Thanks for any help

Apple waits for Adobe to provide updates to them (just because Adobe has made the update available as a direct download does not mean they provided the update to Apple at the same time). Then everything in the App store is vetted before it gets updated. It takes time, so there is always a lag between the Adobe version and the App store version.

I have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can

i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.

You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0.

Is there a update for Photoshop Elements 8 that will support raw files from a Canon T3i 600d?

Is there a update for Photoshop Elements 8 that will support raw files from a Canon T3i 600d?

You have two alternatives:
(1) Upgrade to PSE 9,10 or 11. (2) Download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Windows download click here DNG Converter 7.3
Mac download click here DNG Converter 7.3
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Photoshop elements does not open, says "gathering user info...."

photoshop elements does not open, says "gathering user info...."

Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 9\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.
Solution 5: Try with admin account or right click and select run as admin. or try directly from .exe
For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743
Thanks,
Garry

Does photoshop elements 13 support nikon d610 raw files?

Does Photoshop elements 13 support Nikon d610 raw files?

Hi lhanswer,
Yes, Nikon D610 is supported in PSE 13
Camera Raw plug-in | Supported cameras
http://kb2.adobe.com/cps/408/kb408941.html
Regards,
Sandeep

My photoshop cs6 does not open Nikon raw pictures

my photoshop cs6 does not open Nikon raw pictures

Check your version of ACR (Photoshop > About Plug-in > Camera Raw) and see on this list
Camera Raw plug-in | Supported cameras
whether your camera should be supported or not.

Elements 12 does not open nef raw files depsite having latest raw plug-in

Help please - wasted far too much time trying to open my raw files with recently purchased elements 12. I have tried to ensure all software is up-to-date but still the message that the raw file is not supported appears when I try to open with Camera Raw . The files open in nikon software and windows. My camera is a Nikon D7100.

As a test, try copying a nef file from your camera to computer without using nikon transfer and see if it opens in pse 12.
Which version of windows are you using?
If in the photoshop elements 12 editor you go to Help>About Plug-In and click on the words Camera Raw, what version does it say?

I just bought the canon 5d mark iii and my photoshop elements 10 wont read my raw files. I want to buy photoshop elements 13...is this compatible with my new camera?

I just bought the canon 5d mark iii and my photoshop elements 10 won't read my raw files. I want to buy photoshop elements 13 but want to make sure my camera is compatible with it first. Thank you for your help!

Photoshop elements 10 should be able to open those files if you update to camera raw 6.7
Which operating system are you using?
windows
Adobe - Photoshop Elements : For Windows : Camera Raw 6.7 update for Elements 10
mac
Adobe - Photoshop Elements : For Macintosh : Camera Raw 6.7 update for Elements 10
Also, photoshop elements 13 will open those files as well.

Photoshop Elements 6 not opening jpegs following adjustment.

I am getting the following error message: Photoshop Elements could not complete your request because a JPEG marker segment length is too short (the file may be truncated or incomplete).
This error message has occured with images that I have imported and renamed in Bridge and to which I have made adjustments in Photoshop Elements 6. The images which I have renamed but not resized or adjusted or touched in any way are opening without a problem. Whatever the problem it is doesn't seem to be anything to do with re-naming. This problem has occured previously but because it involved only a small number of files I just re-did them and the problem did not re-occur. On this occasion it's 40+ files so it's time to find out the cause if possible. Help would be appreciated. Thanks - Victor

Your computer may have insufficient RAM. When adding text you are temporarily increasing the file size by adding a new Layer (the text layer) which requires more memory.
Try this:
Add your text, then click Layer >>Flatten image. Then save and press Ctrl+W to close the file. Then move to your next open file and repeat.

Photoshop CS5 will not open some tiff files

I'm running Windows 7 64-bit and I'm using Photoshop CS5 as my default program for opening .jpg and .tif files.
Recently I installed a new scanner (Canon Lide210) and I usually save the scanned images as .tif files (for manipulation later).
Images in .tif format saved from scans with my old Canon scanner (that does not work with Windows 7) open fine in Photoshop but images from the new scanner will not open (message says 'Could not complete your request because the file is not compatible with this version of Photoshop').
Can anyone help with this? I always thought tifs were tifs and didn't realise there could be different 'versions'.
I do a lot of detailed artwork and it's important that I can work with tif files (and preferably with this new scanner!!)
Thanks for your help

Thank you all for your help.
The scanner options are to save as JPEG/Exif, TIFF or BMP (with standard, low compression or high compression).
I've just scanned a colour photo and saved it in all three formats (standard compression). All the files now open in PS, with the Camera Raw preview screen (which I've never seen before!).
I've also scanned a black and white drawing, both as a B&W photo and as a B&W document, and saved these scans as TIFFs. Both these now open in PS. The older files that I have not been able to open in PS still do not open. (These files open in MSoft Picture Manager and Quicktime Picture Viewer - though the quality is awful in Picture Viewer.)
It seems to me that whatever was causing the problem might have been 'cured' by some recent software update.
Do you think this is the likely answer? If you'd still be interested to look at one of the rogue files then I could upload one.
Thanks

Not opening multiple RAW files

If i open a Raw file in Bridge, it opens up perfectly. Also my jpegs and tiff open in RAW, so no problem there. The problem is, that I cannot open multiple Raw files from Bridge into Raw with the option "open in Camera Raw" So the shortcut cmd+R ( I am on a mac) does not work. It says that Raw has to be opened at least once. I have been using Raw for years now so it has been opened multiple times.
I Can not seem to find a solution. I would really like to open up multiple edited Raw files at once, and in Raw give the order to rename them into JPEG. If you do that, you see Photoshop CC and a window that says how many convertions are left. So far so good... but before, I was able to open up some new raw files in Camera Raw without having to wait for Photoshop to convert everything. Now I have to wait for a long time before I can make my new Edits. Can somebody please help me?
I am using all updated software.
Ben

Hello SSPRENGEL,
Thank you very much for your reply. My apologies for the mess up with RAW and ACR naming.
The situation is, that I can not open any file with CMd-R. I can open single files with CMD-O. But I need to open multiple files at ones with CMD-R. It used to work good.
The problem is, That I am in the business of school photography. I take the pictures as RAW files on an Nikon camera (nef) After I ajust all the pictures, I have to rename all of them to JPEG, just to get them online.
I used to do that with ACR. But now the problem is, if I open a lot of picures with CMD-O, It opens up very good in ACR and I still can give the command to save all of these as JPEG. It workt great, but I have to wait a looooooong time before I can open up my next batch of pictures and start to adjust those. Normally, it would save the files as JPEG and I was able to open up a new batch of pictures in ACR right away. That saves me A LOT OF TIME. This only works if you can open the files with CMS-R. Strange...
I updated my I-mac to 10.9.1 so I see that is not the newest. PS-CC is 14-2-1 x64 and I am using the beta ACR for now (8.4)
I just tried to open a RAW file in photoshop with the normal open command and it lauches ACR perfectly. But again from within Adobe bridge I still get the same error about needing to open a qualifying product at least once.
Stange isn't it?
Thank you very much for your time!
Ben

Elements 11 not seeing/downloading RAW files. HELP!!!

Hello,
Just got Elements 11 and when I put the card into my pc the download box pops up and it reads the card, but it does not see the raw files, only the jpg files. If I use windows explorer to view the card it sees the raw files fine. I can open raw files from the card into elements 11 editor fine. It just will not see the raw file in the downloader box. I had Elements 7 before 11 and it worked fine.
I have windows 7 and Elements 11 is updated to the latest version.
Any help would be great.
Thanks,
David

Thanks for the reply.
Thats right, not seeing any raw thumbnails. If I just have raw files on the card and put it into the PC's card reader or a USB exturnal card reader all it says is"This divice does not have any supported media". It will show the jpg and tif files. It's a really weird problem. Elements 7 worked fine. All my cameras are old, D700, D3, D300s, D1x so it's not a problem being a new camera thats not supported yet.
I'll try the organizer way and see if it works or I may just use the Nikon transfer software.

Photoshop Elements 10 not open new raw files

Similar Messages

Maybe you are looking for