Photoshop Elements 10 stürzt dauernd ab...

Hallo,
ich habe folgendes Problem:
Seit kurzem funktioniert Photoshop Elements 10 gar nicht mehr, zuerst stürzte das Programm sofort nach dem Start wieder ab, jetzt habe ich das Programm deinstalliert und neu installiert, Camera Raw ist auch aktualisiert, nun konnte ich zumindest das Programm öffnen aber leider keine Dateien
von der Speicherkarte (interner Kartenleser) oder von der HD Kamera laden, dann bekomme ich die Fehlermeldung:
Adobe Foto Downloader ist auf ein Problem gestoßen und muss geschlossen werden, Fehlercode c0000005, Adresse 77103e04
Ich habe auch schon ein neues Benutzerkonto erstellt, hilft auch nicht weiter.
Betriebssystem ist Windows 7 64 Bit, Notebook von Acer, Intel Pentium i3
Vielen Dank

Are you able to use other features of PSE10?

Similar Messages

  • Adobe Photoshop Elements 9 Organizer stürzt immer ab!?

    Hallo zusammen,
    ich habe folgendes Problem:
    immer wenn ich den Adobe Photoshop Elements 9 Organizer starte stürzt er gleich nach wenigen Sekunden ab.
    Photoshop läuft dagegen immer stabil.
    Das ganze ist nachdem verschieben eines Tags entstanden. Ich habe ihn verschoben und danach ist das Programm abgestürzt.
    Weiß jemand woran das Abstürzen liegen könnte?
    Grüße
    Julian
    Nachtrag: Eine Neuinstallation durchführt > Organizer stürzt immernoch ab

    Hallo Zusammen !
    Habe das gleiche Problem!
    Zwar nicht nach einigen Sekunden, sondern je nachdem, was ich mache - nicht reproduzierbar, sondern sehr willkürlich - z.B. beim Importieren, beim Anzeigen des Pfades, beim Importieren aus Ordnern, die links im Pfad stehen, usw. Grundsätzlich erscheint das "Programm funktioniert nicht mehr"-Fenster von Windows 7.
    Ich rufe auch die beiden Programme Organizer und Editor nicht mehr über den ursprünglich vom Programm installierten Aufruf auf - wo man am Anfang die Wahl zwischen Organizer und Editor hat - dann stürzte ewig und grundsätzlich auch der Editor ab.
    Hab mir für beide Programme eine Desktop-Verknüpfung gemacht und seitdem gehts mit dem Editor einigermassen, doch der Organizer ist echt krass. Aber das wurde bei Version 8 ja schon bemängelt, dass das Organizer-Programm viele (kleine) Fehler hat, die zu häufigen Abstürzen führen. Allerdings finde ich, dass ein Fehler, der ein Programm vollständig zum Absturz bringt nicht unbedingt klein zu nennen ist ! Auch sollte man - meiner bescheidenen Meinung nach - ein Programm erstmal einigermassen fehlerfrei machen, bevor man sich an eine neue Version setzt - sonst schleppt man alte Fehler immer weiter mit !
    Offensichtlich ist es mal wieder so, dass der EndKunde auch EndTester ist und das bei einem Programm, dass weder Free- noch Share sondern teure BezahlSoftware ist !!
    Ich hoffe es lesen auch einige Adobe-Entwickler hier mal mit, setzen sich auf Ihren Hintern und beseitigen die vorliegenden Fehler erstmal, bevor wir User für Version 10.0 oder das Update von 9 nach 10 erneut zur Kasse gebeten werden !
    Sollte einer von meinen Leidensgenossen inzwischen eine Lösung gefunden haben, so wäre ich dankbar für einen Hinweis !
    Grüße, BikeFunJR

  • Photoshop Elements 11 auf IMac 27 mit Fusion Drive stürzt ab

    Seit ich meinen neuen IMac mit FusionDrive habe läuft mein Photoshop Elements 11 nicht mehr. Das Programm stürzt bereits beim Start ab. Es lies sich noch registrieren, aber seitdem habe ich keine Möglichkeit mehr, damit zu arbeiten. Zu allem Überfluss kann ich es auch nicht unter Parallels mit Windows 8 nutzen, weil dies offentsichtlich als zweite unzulässige Registrierung gesehen wird, obwohl es auf dem selben Rechner läuft.

    I migrated from old to new with OSX-migration-tool
    Uh oh. That always, always creates problems with PSE. The problem is that  PSE isn't a nice tidy package in accordance with the apple developer guidelines--the PSE installer strews things all over your hard drive in places the migration assistant isn't programmed to look. You will need to download and run this:
    http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    and then you can manually remove the bits that copied over. Look especially in hard drive>library>application support>adobe. Once you get the mess cleaned up you should be able to reinstall.

  • Photoshop Elements stürzt ab bei Öffnen der Photomerge - Panorama funktion

    wenn ich die Funktion Photomerge - Panorama aufrufe stürzt Photoshop elements 9 ab .
    Es wird ein Hinweis angezeigt, dass das prongramm aufgrund eines Problems nicht richtug ausgeführt wird und geschlossen wird.
    Was kann ich tun?

    Ich habe das selbe Problem und bisher keine Antwort gefunden. (Windows 8) Hat jemand eine Idee?

  • Adobe Photoshop Elements 6.0 (Editor) Fehlermeldung

    Hallo liebe Leute,
    ich bin neu hier und habe ein Problem.
    Wenn ich Adobe Photoshop Elements 6.0 (Editor) beende, erscheint folgende Fehlermeldung:
    "Adobe Photoshop Elements 6.0 (Editor) funktioniert nicht mehr
    Es wird nach einer Lösung für das Problem gesucht..."
    Diese Meldung verschwindet dann leider nicht mehr und das Notebook stürzt ab...
    Folgendes habe ich bereits versucht:
    - Neuinstallation
    - Kompatibilitätsmodus
    - Diverse Recherchen im Netz (ohne Erfolg)
    Vielleicht kann mir jemand dabei helfen dieses Problem zu lösen.
    Weitere Informationen:
    - Installiert auf Acer Aspire 8930G Notebook
    - Plattform: WindowsVista Home Premium SP2 32Bit
    Vielen Dank.

    Hi,
    Please try couple of probable solutions as mentioned below:
    Solution 1:
    1. Close Elements.
    2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
    3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
    Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
    Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
    Solution 4:
    On the drive on which you have installed PSE,on my machine it is on C:
    Go  to C:\Program Files\Adobe\Photoshop Elements 6\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain  plug-in. Remove that plug-in from that location and copy it somewhere  else.
    Now launch PSE and check if it works.

  • Photoshop Elements 12 wurde unerwartet beendet - Immer wenn man das zweite Bild für das Web speichern möchte

    Hallo zusammen, ich habe mir vor zwei Tagen adobe photoshop Elements 12 Editor gekauft. Folgendes Problem tritt jedes Mal wieder auf: Nachdem ich ein erstes Bild bearbeitet habe und gespeichert habe, bearbeite ich ein weiteres. Wenn ich dieses Bild dann fürs Web ebenfalls speichern möchte, stürzt das Programm ab und folgende Fehlermeldung kommt: "Photoshop Elements 12 Editor wurde unerwartet beendet". Ich habe es bereits neu installieret, aber das Problem bleibt bestehen. Kann mir jemand helfen? Danke und Gruß

    Ja, doofes, böses Programm! *lol* Na sorry, ohne ein paar sinnvolle Informationen wie Systeminfo, Art und Größe der Bilder, wo und wie gespeichert wird usw. wird da nix bei rauskommen...
    Mylenium

  • Photoshop Elements-Hilfe | Auswählen eines Bereichs eines Fotos mit Präzision

    Diese Frage wurde zu folgendem Artikel gestellt: http://helpx.adobe.com/de/photoshop-elements/getting-started/select-area.html

    In PSE12 fehlt die wirklich hervorragende Funktion der magischen Extraktion, wie ich sie aus PSE9 und später aus PSE11 kenne. Nun muss ich die PSE11 behalten, um komplexe Extraktionen zu erarbeiten, die dann später in PSE 12 weiter bearbeiten kann.
    Falls Ihr Euch fragt, was dieser "Blödsinn" soll: In PSE11 funktioniert seit OS MAVERICKS die Funktionalität: Filter/Zeichenfilter/Comics nicht mehr. Das Programm stürzt ab. Also : 2-Gleisig? Ich habe vorher nicht gewusst, das PSE12 die Funktion "Magische Extraktion" nicht mehr hat.

  • Computer Crash mit Adobe Photoshop Elements

    Sehr geehrte Damen und Herren
    Mein Computer ist abgestürzt und inzwischen habe ich einen Neuen, Schnelleren. Ich hatte nur seit 2 Monaten Photoshop Elements 11 aufgeladen und da ich einen 2. Computer in Wallis habe, wollte ich nicht die Berechtigung verlieren, das Programm auf 2 Computer nutzen zu können. Was muss ich machen, damit diese Möglichkeit immer noch besteht?
    Vielen Dank für Ihre Antwort und freundliche Grüsse
    Ian Tomlinson

    You need to contact support directly for activation/deactivation and other installation issues.
    To get help now click here for product support

  • Using Adobe Bridge with Photoshop Elements

    I have an iMAC with iLife 08.
    I take photos in RAW format with a Nikon camera.
    I have been editing photos this way:
    After uploading photos to iPhoto, export them as jpg to a new folder on the desktop, external HD or wherever. I open Photoshop Elements, edit the exported photo.
    Then I'm stuck with my edits outside of iPhoto, unless I then import them back into iPhoto. It works, but it's cumbersome.
    Today I thought I'd try a different route. I opened Photoshop Elements, and tried to use Bridge to browse photos. I can find the iPhoto library easy enough, but if I click on it, it opens iPhoto, and I'm stuck - can't open the photos in Photoshop.
    I am hoping that if I do it correctly, I can save my edits directly back into iPhoto.
    Any ideas?

    Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
    1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • How many computers can you use one copy of Photoshop Elements 11 on please?

    I intend to purchase Adobe Photoshop Elements 11 for my two student children.  Could you tell me if they will both be able to install in on their respective computers?

    One copy of the software can be installed and activated on two computers but a) they must be used by the same person and b) not at the same.
    Your intended use is not in accordance with conditions set out in the End User License Agreement (EULA)
    http://www.adobe.com/products/eulas/pdfs/Gen_WWCombined-MULTI-20111031_1230.pdf
    2.1.3 Portable or Home Computer Use. Subject to the restrictions set forth in Section 2.1.4, the
    primary user of the Computer on which the Software is installed under Section 2.1 (“Primary User”)
    may install a second copy of the Software for his or her exclusive use on either a portable Computer
    or a Computer located at his or her home, provided that the Software on the portable or home
    Computer is not used at the same time as the Software on the primary Computer.
    You should purchase two copies of the software giving each of your children the ability to use the software on two computers.

  • I have been using Adobe Photoshop Elements 11 for two years. I got a new printer and installed it although I did not remove my old printer from my computer. I used this program and my new printer for quite a few months, but today I deleted my old printer

    I have been using Adobe Photoshop Elements 11 for along time now. When I first used the program I had a different printer than I have now. Although I changed printers I never removed the software from my old one. Now this was never a problem until today. When I choose a printer I still had option to use the old one but always chose my new HP Envy 5530 and Adobe never had a problem printing from that new printer. However today I decided to remove my old printer from my computer and now my Adobe cannot find my new printer.  How can I make it find the HP printer?

    Try this --
    Go to the bottom of the link I gave you, and you will see
    click that link and then click the chat button to talk to an Adobe agent

  • I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to che

    I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to check your printer settings before printing."  I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

    Hi ,
    Please update to PSE 13.1
    13.1 has solved this problem.
    Refer to this link.
    Photoshop Elements Help | Printer errors with Photoshop Elements 13

  • I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

    I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
    I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
    I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
    After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
    “Welcome to Aperture 3.2
    Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
    Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
    Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
    Current Library Location:
    Jadzia (home)   -----Pictures------Aperture Library
                                                      QUIT             UPGRADE”
    I have heard horror stories  about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
    So here is my dilemma.  I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
    Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

    Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop.  Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
    You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file.  For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto. 
    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    NOTE: With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Note:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    OT

  • How can I install Adobe Photoshop Elements Update 9.0.3 after I get a message that Installation has failed and the solution is not in troubleshooting or forums?

    My Photoshop Elements 9 stopped working a couple of weeks ago. When I clicked the PSE button nothing happened. I tried this several times over a few days and it still failed. I uninstalled the program and re-installed it. It worked well. Then I tried to install the Update 9.0.3. The download was almost successful. When it was about to show 100% successful for the download, an error message said the installation had failed and that I should try later. I tried this many times over a few days and the same result occurred. I tried troubleshooting and the answers to questions, but I could not find an answer. I don't know where to go to see if anybody has answered my question. How can I install Update 9.0.3?
    Colin Hansen

    Try downloading and installing the 9.0.3 updater from here:
    mac
    Adobe - Photoshop Elements : For Macintosh
    windows
    Adobe - Photoshop Elements : For Windows

  • How can I integrate metadata and keywords in Lightroom with those in Photoshop, Bridge, and Photoshop Elements? In other words, is there a way to retrieve common metadata templates from all modules? Thanks!

    Keyword and Metadata Integration throughout Adobe Modules

    Thanks! That's helpful.
    What I mean by "common metadata", is a unified, updated, most current metadata, which I could update in each program. That is without overwriting the metadata, but appending new keywords to the metadata I created in the previous program.
    I use Bridge, then Lightroom and finally Photoshop. That's the regular workflow: Bridge for preliminary sorting and and adding some keywords; Lightroom for organizing and picking the best images; finally, Photoshop for processing. I got Photoshop Elements on trial. Doesn't work for my purposes.
    I need to share and update the metadata / keywords when I go from one program into another. Can't retrieve metadata I set up in Bridge into Lightroom. Same happens with Photoshop, where I can't retrieve keywords I add in Lightroom. It's tedious to write up the keywords again.
    Thanks for your efforts!

Maybe you are looking for